1545 screen revision numbers

Similar Questions

• value of result in mode full screen of numbers

  Hello

  Is it possible to have instead of saying a gauge so that the value displayed full screen.

  It's the same as in the digital field display, but I can't resize it, a t least not in fullscreen

  any suggestions?

  
  

• VTP (revision numbers) and a client not getting updates

  Hello.

  I screwed up somewhere along the line one of our switches (3750 x). Once they have been set up at last about 6 months ago we have never touched them again.

  I noticed yesterday when I created a new vlan was not get populated at one of our switches. For some reason, I didn't notice that the domain name on the switch are not updates was not our area.

  So I switched the domain on this switch for the appropriate field and he still shows no updates and also has a revision # 7.

  So now this switch I then unplugged all the ports in the trunk and not "transparent" vtp mode Then, I turned it to "vtp client mode vlan.
  He has always shown the revision 7.

  So I tried 'false vtp domain' and 'transparent vtp mode' and then 'vtp domain mydomain' and ' vtp client mode vlan.
  He has always shown the revision 7.

  So I tried 'false vtp domain' and ' vtp mode vlan transparent ' and then 'vtp domain mydomain' and ' vtp client mode vlan.
  He has always shown the revision 7.

  I am at a loss on how to solve this problem, other than the reconstruction of the switch. I have a server vtp revision 10 and two other switches also in revision 10 who receive updates from the vtp server. Has only one switch.  Please note that this pass it is not working at one time done since there all the VLAN, that we have created on our initial installation.

  -Thank you

  GOOD switch
  Status of vtp GOODSWITCH #show
  VTP Version: 1 to 3
  Running VTP version: 3
  VTP domain: mydomain
  VTP milling Mode: Disabled
  VTP traps generation: disabled
  Device ID: 7426.acad.de00

  Function VLAN:
  --------------
  VTP, operating Mode: Client
  Number of existing VLAN: 15
  Number of existing extended VLAN: 6
  VLAN maximum supported locally: 1005
  Review of configuration: 10
  Main ID: b838.61aa.5880
  Main description: lab-Office
  MD5 summary: 0xB8 0x3E 0x2C 0xB7 0 x 85 0xB5 0x5D 0xA6
  0x4A 0x4E 0xFC 0x5E 0x5A 0xA1 0xAF 0xCC

  MST functionality:
  --------------
  VTP, operating Mode: Transparent

  UNKNOWN entity:
  --------------
  VTP, operating Mode: Transparent

  BAD switch
  Status of vtp BADSWITCH #show
  VTP Version: 1 to 3
  Running VTP version: 3
  VTP domain: mydomain
  VTP milling Mode: Disabled
  VTP traps generation: disabled
  Device ID: 7426.acad.ee80

  Function VLAN:
  --------------
  VTP, operating Mode: Client
  Number of existing VLANs: 12
  Number of existing extended VLAN: 6
  VLAN maximum supported locally: 1005
  Review of configuration: 7
  Main ID: b000.b4b0.f200
  Main description: lab-Office
  MD5 summary: 0x7A 0x5C 0x2E 05 0xF2 0 x 0 x 80 0x6F 0x2F
  0x4E 0xE1 0 x 34 0x07 0 x 01 0x7F 0xB9 0x2B

  MST functionality:
  --------------
  VTP, operating Mode: Transparent

  UNKNOWN entity:
  --------------
  VTP, operating Mode: Transparent

  Hello

  Just to clarify the current VTP server running version 3 and is currently promoted a primary vtp?

  All other customers, even one who does not get the DB synchronized are vtp running all 3?

  Have you tried to force the exisitng vtp primary server again?

  main #vtp

  Please note the following

  If you change the domain vtp3 name AFTER the promotion of the switch to a server then you will need to re-do the promotion again

  :
  Vtp3 Server (promoted to a primary can ONLY change vtp database)
  Primary by vtp domain only vtp

  Any other vtp Server 3 can not change vtp database unless that his promotion to primary derivative (either by force or verification of the other vtp 3 switches (Server/full)

  Add vtp 3 switch as a customer
  --------------------------------------------------------
  1. choose switch to become a customer of vtp 3 (it kerchaoui the revision number is 0 (at bottom transparent change for the customer))
  2. change vtp worm 3 (a joint it will start a synchronization of the vtp DB switched to that of the new vtp3 priamry Server vtp D/B - as long as the Domain password are the same)
  3. change the hidden password (optonal)

  Connected to the network.

  RES

  Paul

• Tecra S1 - new card system with other revision number

  I need to replace the motherboard on my Tecra S1. My version of original motherboard was V000020670. I had my Tecra S1 for 7 years. Last year my motherboard is dead, and I replaced with a Toshiba motherboard with the same exact version number. Now, it's dead again.

  I found possible replacements with revision numbers: V000020670 (original), as well as V000020020 and V000021100. What is the difference between these versions? It's better to get a 'superior' revision number or to stick to the original version: V000020670?

  More great value digital (V000021100) indicates more progressive revision of Board of Directors of (stable) system?

  Thanks in advance.

  Hello

  To be honest, I think you should ask this question a authorized service provider, they have access to the list of spare parts Toshiba and other useful documents. Here it s only a user to user forum and I think that no one here can tell you that references will agree and will work.

  The Toshiba site, you will find a list of all FSA. Simply contact the guy and ask that they will help you. :)

• A second screen on the left hand side project

  I have a second monitor connected to my laptop.  The problem is that it is on the left side of the laptop.  Unfortunately, it behaves as it would be on the right side.

  Is it possible to change this behavior?
  Thank you
  Dan

  I have a second monitor connected to my laptop.  The problem is that it is on the left side of the laptop.  Unfortunately, it behaves as it would be on the right side.

  Is it possible to change this behavior?

  Thank you

  Dan

  Hi Dan

  Click on the desktop and select Screen Resolution.

  In the upper section of this window, you will see a picture of each screen with numbers.

  Position of the mouse cursor on the image on the left and it turns into a cursor "hand".

  Press and hold the left mouse button and drag the image on the opposite side of the image on the right and the release of the mouse cursor.

  Click on apply and Test results.

  Concerning

• iTunes playlists show two different formats. Why is it so.

  iTunes playlists show two different formats. Why is it so.

  A playlist displays a blue screen with numbered songs and music before notation box provided for each song. The other playlist is predominently white numbered from each song and check the box. Why is it so and how both can be given.

  Use the view > view as menu from one of six different layouts. Ones you mention is Playlist and songs respectively.

  TT2

• HP calculators

  On this new hp premium calculator.

  Day 11 March 2014 said a person who had a little trouble to update the firmware.

  had some problems to recharge the battery through the USB connection.

  Question:

  Q1.   Have the calculator firmware and software been updated at all?

  Q2.   If you buy the first hp calculator today, will it be updated?

  Thank you for your help.

  A1. Yes.  The dates of the firmware (and revision numbers) that have been available so far include them:

  2013 8 13 (5106) - the first version never shipped.

  2013-11-25 (5447) - first published in update.

  2014 3 31 (6030) - published second (and current) update.

  The first HP connectivity Kit can automatically detect the version of your premium and, if necessary, download the latest version and update your premium.

  A2. Being the first user editable, easily, for free, there is no need to worry about which version of firmware you get when you buy a prime number.  Just run the connection Kit and it'll make your premium is up to date.

• How to make a replacement for my Extensa 4420 backlight?

  My screen went black on my Acer Extensa 4420 tonight after the screen had been sort of flickering 15 minutes.  I always saw the mail page, but it was too dark to actually do something with it.  I think I need to replace the backlight, but can someone tell me where to find one, or if it's possible to do just the backlight?  I was thinking just to get a new screen.  Would that take care of the problem or is it something in the motherboard.  I can use the computer, but when it comes to their fixation, IM completely lost.  Thanks to anyone who can help me with this problem.  I am disabled and the laptop is my source of reading and my only mode of entertainment, I do not leave my House very often.

  The issue could be with the inverter Board or the backlight.

  Part numbers compatible ups are:

  19.TCBV1.001

  19.TK501.001

  19.TK501.002

  Compatible screen reference numbers are:

  LK.14105.018

  LK.14106.011

  LK.14106.014

  LK.14108.010

  LK.1410D.016

• Failed to start. Watch 9295/9295 registry components of the machine

  Cannot start. On, white screen, then numbers flashing on screen followed parts of machinery 9295/9295 registry, then white screen.

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to refer to the links and check if it helps.

  What to do if Windows does not start correctly

  Troubleshooting in safe mode

  Note: Installation custom (own) Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After installation, you will need to reinstall your programs and restore your files from backup copies.

  Let us know the results. We will be happy to help you further.

• Windows Vista problem with status: 0xc000000f

  My computer has stopped working it States a recent hardware or software change might be the cause...

  When I select start windows normally it passes through the process... with green botton bars... through a blue screen with numbers... turn off for a second... then back to error recovery Windows then Windows Boot Manager where I get this status: 0xc000000f
  The only keys that make anything on the keyboard are enter, ESC, and arrow...
  I can't find my installation disk... When I turn off the computer is not a difference... same messages.  What should I do to fix my computer?
  Help please!

  Hi Easpencer,

  Did recent changes to the computer?

  You must get the disk to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Additional information:
  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

• Phone stock driving bad app

  Hi guys,.

  A little help please if possible my Sony phone Z3 compact app (stock) guard bother

  • to make a call I hear no tone or spin then the call connects still nothing
  • Dial a number and the phone does not auto filling or correspond to a contact in my address book just a screen of numbers
  • loading up the phone app, the call log takes forever to load and top along Summit contacts take ages to load

  restarted the phone, the call log cleared always the same

  I looked in the applications settings (see screenshot) I have 3 phone apps a phone app and a phone/messaging service. All applications on the phone are the same 5.1.1 - 1 version

  any ideas that I need 3 apps or is it a conflict can someone take a look to see if they have 3 apps or someone else has the same problems

  5.1.1 running Android build 23.4.A.1.200

  

  @nickbaker66

  Try this

  Settings > apps > all > phone (all) > clear data > reboots the phone > check again.

• vMotion compatibility

  If I have two servers from different manufacturers in the same cluster DRS (Dell and HP), but both with Intel E5600 processors, are there problems with vmotion compatibility?

  See what VMware says:

  Sometimes, the suppliers of processors introduced changes important architects in the same processor family (for example, 64-bit and SSE3 extensions). VMware identifies these exceptions, if it cannot guarantee a successful with vMotion migration.

  Source: the CPU compatibility requirements

  How should I treat the Intel Xeon E3 and E5 processors or Intel Xeon X-series, series E, series L processors have different review or the series of numbers (e.g., v2, v3, v4, or x 5680, x 5687, x 5690)

  When you activate CVS for a cluster with Intel of E3 Xeon or Xeon E5 family processors that have different revision numbers (v2, v3, v4), a CVS base is necessary. This is due to new instruction sets is available in different revisions.  Although the processors will be the basis of CVS, it is mandatory for all processors have the same sets of instructions to virtual machines.

  As for the process of Xeon with different revisions, when you turn on VCA for a cluster with Intel Xeon processors even family (for example, E56xx, X56xx, L56xx), a CVS base is necessary. This is due to new instruction sets is available in different revisions.  Although the processors will be the basis of CVS, it is mandatory for all processors have the same sets of instructions to virtual machines.

  Source: VMware KB: FAQ EVC and CPU compatibility

• cannot make the mask with a transparent visor

  Hello.

  I have a footage1 with a screen showing numbers, etc and I footage2 showing a football game.

  I want the screen to display the football game

  I created rectangular layer mask and is a relative of footage2, also tried all options of cache on the layer of footage2 but the mask remains white Uni.

  How can I make this white triangle to show the football game?

  A matte always uses the layer just above. I guess your "5 solid white" is the hidden layer you want to use as a matte. I suppose also that you want to lock this matte for the layer 'Motion Tracking'. Do the "white 5 solids ' parent layer of the" Brazil... mp4 ' layer means that the layer of "Brazil"... "move with the"5 solid white "layer". I don't know what's on the layer "Brazil"... "but I don't think you want to move it. I do not see a "white triangle", so I guess you mean the White Rectangle.

  Let's start with what I think I know.

  1. You have a layer with numbers and other things. Name this layer "numbers."
  2. You have a layer with images of a football that you have followed. Name this layer "football".
  3. I see what I think, this is a null value in your computer. I think that is where the info of follow-up for the layer of "football". Name this layer "footbalTrackNull".
  4. You have created a solid with a rectangular mask that you want to use as a matte. Name this layer matte

  I think that. If I'm right, then I guess you want to hide the layer numbers, do follow football. I see a few problems. Your "Matt" layer looks like you have drawn the outline of something of no room for the camera. If this is the case, you will have to tell us.

  Set up your layers of composition like this:

  1. mat - footballTrackNull set as parent
  2. numbers - set to follow mat - define footballTrackNull as a parent.
  3. Football
  4. footballTrackNull

  The visibility of layer 1 will be off as soon as you apply the matte. Place the cover on the football. The visibility of the layer 4 can also be set to off, but it does not matter because this is a null value.

  This will move the numbers and the layer mate together because they follow the footballTrackNull

  I hope this helps. The screenshot has us in the right direction, but a better understanding of what you're trying to achieve would also help.

• Follow the evolution of the PO to 11i

  Is there a way that I can know how many times a purchase order changed before and after she was sent to a vendor to the 11i?

  (1) it seems that they have been activated in our case since there are revision numbers in the table.

  Just because you have the revisions do not mean that the PO has been archived. It must be addressed on the tables I mentioned.

  (2) is in any way I can tell if a purchase order has been changed before and after he was sent to a supplier?
  Depends on many variables such as your method of transmission of archives on the definition, the workflow for approval of IN. etc.

  If you use the seeded Email PDF feature, the OP should have a PDF attachment which can be compared to the current PO.
  You can also check the State - if it is "Requires the re-registration", then most likely, it was changed.
  Keep a copy of which was sent to the supplier? You can ask the provider to send a copy of the purchase order? You can compare the current PO this copy.
  OR
  Is the status of the Po "requires the re-registration?

  Sandeep Gandhi

• Chronology of the time CS4 don't make sense.

  Hello

  I'm working on a sequence which is 00; 29; 29; 20 in length. For me it is 29 minutes and 29 seconds.  These numbers are shown in yellow on the lower left side of the screen.  These same numbers are also shown in yellow just above and to the left of the timeline.  These agree with my calendar time and play time.

  Now and it is not supposed me...  On the right side at the bottom and just below the screen, white numbers I see show 00; 01; 50 07.  Isn't that supposed to be the total length of the sequence?

  Little worried that only 1 minute and 50 seconds are in the sequence.  I make the entire sequence.

  Help please.              Tom B.

  Tom,

  Looks like you have a "orphan", out past where your Timeline must end.

  When you hit \ (backslash) to zoom out on the entire timeline, you see a Clip, out beyond the end into any track?

  Good luck

  Hunt