Error: There is no communication between computer and printer
Original title;
printer not printihg after the installation of new updates
I get messege there is no commacation between computer and printer
Hello
1. What is the brand and model of the printer?
2. What are the updates that have been installed before the show?
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
3. have you checked the status of the printer in Device Manager?
Open the Device Manager
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
4. what operating system is installed on the computer?
You can Open the printer Troubleshooter and check if it makes a difference:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
You can follow this link and check if it helps.
Let us know the result!
Tags: Windows
Similar Questions
-
Communication between computer and printer problem
Why can't I print my documents, they go into the queue and do not print?
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
Series communication between computer and cRIO
Hello
I am not new to Labview or cRIO programming, however, venture in for my first try at the serial communication. I have a controller (not original NOR) that sends data over a serial RS232 network I want to open a parallel session to the data that I collect with a cRIO. Before we get to integrate, I try to test with a series, my computer cable and hyperterminal communications and the serial port cRIO. I followed and validated exploitation and drivers with the following text:
How to do a loopback Test series
http://www.NI.com/white-paper/3450/enHowever, when I try to use the following example, I get nothing:
Transfer data between cRIO and host series
https://decibel.NI.com/content/docs/doc-3816Any ideas on where to start? I appreciate very much all the advice.
Thank you.
I have confirmed that it is a right. I'll try a null-modem cable.
Thank you!
-
I bought adobe photoshop elements13 & adobe first elments 13 and it keeps out error tells me to restart the computer, and then try to reinstall and it keeps it doing so. How to download or I have to take back to the store and ask them to help me.
You try to download at the bottom of link?
Download Photoshop Elements | 10, 11, 12, 13
Or are you any error messages during launch or installation? If so, post the exact error message.
-
Differences between compute and calculate Force
Hello
What is the diff between compute and calculate ForceWhen your data in the application to change it shows 'calculate' option. But if you change the metadata or data, then it gives you strength 'calculate' option.
Hope this helps
Nick -
Communication between TNS_Listener and the listener of the Apex
Hi all
I how communication between TNS Listener, receiver of the Apex and Apex? For some reason, I got the following error of Apex listener:
I truncated messages Java object.Caused by: oracle.dbtools.rt.web.WebException: Unable to start the Universal Connection Pool: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource . . . Caused by: oracle.net.ns.NetException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
This has happened when I tried to connect to the Apex. So I can fix it by going to:
then everything worked fine.http://localhost:8080/apex/listenerConfigure
My listener.ora file:
My tnsnames.ora fileLISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521)) ) ) ADR_BASE_LISTENER = /usr/local/oracle ADR_BASE_ORACLE_LISTENER = /usr/local/oracle
When inara is the name of the instance and the firefly is the host name.INARA = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = firefly.snowdrop.com)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = inara.snowdrop.com) ) )
Is that the order of start if first the TNS Listener or listener Apex matter first?
Best regards
Val
Published by: Valerie good-natured August 1, 2011 05:47Hi Val,
My tnsnames.ora is configured for an existing server and there is no client configurations like sqlplus, sql or earpiece of the apex developer. However until now the server can connect to customers without problem (I just discover that unreproducible error on 'impossible to find the SID' sometimes occurs at the beginning of the Summit, the kick-off and can be solved by waiting for a while to connect to reconnect), so again I must modify the .ora?
No, if your database listener is configured properly (i.e., he listens to the SID that you try to connect to the network interface/hostname/ip address /... she must use), there is no need to make any other configuration, especially not on another machine.
-Udo
-
Communication between Labview and Rn42 Bluetooth
Hello
I am currently working on a project that requires communication between a bluetooth equipment and my pc with bluetooth built-in. The bluetooth hardware is verfied working with Blueterm on android. However I'm unable to connect with my laptop blueterm. Is back a unabe to connect error. I use bluetooth vi without series or visa. This method is suggested? Thank you
-
Speed of communication between workstation and server
Is there a way when I access my router settings that I can increase the amount of time it takes to run a report on the data of my server? All I want to do is run a report of 100 emails or more leads is entered in the database today. But it takes so long for the server to send this info to a spreadsheet on my workstation. Don't you think that it is a router issue?
What is the number of your router model. These are settings that you can set your may be this could solve the problem. If you have a firewall or an Antivirus on your computer try turning it off. Login to your configuration page of the router and under configuration tab change the MTU to 1365 size and click on save settings. After that you can try to transfer the files between your computer and check how his work.
-
Communication between virtual and real session
A virtual session may communicate information to the real machine? In other words, if a virtual session running can I send a message or a text to be saved on the actual computer?
I'm under v VMWare Workstation 7.1.1 on a PC running Windows XP Pro.
Sure! I'm not sure what exactly mean you by 'send a message or text' but you have several options:
By default (depending on how your virtual computer was created) under the virtual machine settings > Options > Guest insulation, Drag and Drop and copy and paste are enabled. This allows you to freely drag and drop and copy and paste between guest and host operating systems. If these are not enabled, you can activate them. It's one of the ways safer and easier to share data.
You can also create, under the ' Virtual Machine Settings > Options > folders ', a file shared between the two. Although some do not recommend this for reasons of performance and security.
You can share files over the network by using shared folders, just like any physical PC 2 would be to share files. If you don't know how to do this, there are a lot of tutorials on the web.
It is a bit more advanced, but you can also share a real physical drive (see the user manual). It is the least secure method, but offers the best performance if you regularly share huge amounts of data (several tens or hundreds of gigabytes).
-
I read the info provided and understand the details of my use of the computer and the I.P. address are collected for experimental and statistical data. Are there chances of my data compromised as it is sent, or after it is received? I'm sure most people would have their question answered by the information provided. Normally, you offer the only instructions I can understand. I apologize for my lack of knowledge.
However, I trust Mozilla/Firefox and despise this ' other browser' and their attempt to email. I used it only temporarily because I need to download my email Juno and thought they were the only ones that offered this option.
Laughing out loud... I need a complete encyclopedia "all for computers: your PC, Firefox, Email, Windows, words of understanding, etc.". Until a person educated me yesterday, I planned to spend my email in Thunderbird, just because it is your product - but it does not include an e-mail account.
In addition, I'm going to try to create a new account of Firefox and upgrade to the new sync... I copied everything, but if you have any advice or information to help me not mess up... Please let me know.
Thank you very much for coming, be Mozilla Firefox!
If the data is sent via a secure connection, there should be no problem.
-
All of a sudden my computer will not start and I tried to reinstall/repair the operating system.
When you try to install the OS, when booting from the CD and before asking questions of formatting, it displays a blue screen. sayng 'Search for viruses on your computer' and finally 0x0000007B, etc...
Thanks in advance
If you use hard drives SATA and AHCI is enabled in the BIOS, you will need to press F6 and add SATA drivers when it says press F6.
Otherwise, you will need to change AHCI Mode IDE in the BIOS (BUT you cannot change it back to AHCI after). Well, you can with a registry hack
Or you need to integrate the SATA drivers, then reinstall windows
This is what the stop error 0x0000007B means. He can not find the hard drive (if you add or integrate SATA drivers). It will crash before you get the installation / configuration screen (XP, since the XP CD doesn't have SATA or RAID drivers on that).
And clear the virus check option in the BIOS if its permit
-
Communications between moviescript and Enterframe functions?
Here's the problem: I need to print different pages (with print-o-matic) and printing is controlled in a moviescript. However, the pages contain 2 images each, the first image for the preparation of the page using the code EnterFrame (displaying the text "loading" to the user), and the second image which is shown after that the page is ready. I need to print of course the second image.
If I control the read moviescript head to go to the first image, EnterFrame functions are not compiled and the read head never goes to the second image. If I go directly to the second image, it is not prepared correctly. How should I solve this?
Basically, I need to order the moviescript like this: go in the first frame of the page-> do the enterframe functions-> then the second image of the page is reached add the page to the print list-> go to the first image to another page-> etc.
Is there a way I could do that these functions EnterFrame contact moviescript?Quote:
Posted by: newsgroup user
Then in the code, you have that is causing the playhead to move, add
something like:go to the section "part1Setup" - according to what is your Setup environment
sendSprite(0,#exitFrame)
go to the section "part2" - print frameSprite (0) is the script, and this will cause an error id that
channel does not contain a ' on exitFrame me' command.Thanks a lot, this solves the problem.
-
Communication between LabVIEW and MCU based on Modbus Protocol
Hello
I am a first year student in the port.and series applications see you, my projiect needs to communicate between LV and MCU based on Modbus Protocol.all configure it are correct, but the lv to send false information which is not suitable for modbus.i do not know how to fix it.
My programs are:
Why did you decide to write your own code instead of what is already available? If you had done a search, you would have easily found the modbus library. Just give a try.
-
Hi, I have HP photosmart 5510, TRIOUX, scanning, web copy. When I specify printing, sometimes it works, other times, the computer says it cannot connect to the printer. The printer could not connect to the computer to scan a page to the computer.
My computer is an iMac, osX.
Sometimes after a long period of time the dormant printer will activate and print the room - it seems as if something was trying to connect to a specific time. Can anyone help please.
Thank you. I changed the timer for max - now it is 15 minutes. I'll check for a few days.
-
My laptop computer and printer do not communicate with each other.
I went to "printers and devices in the control panel and my laptop has an icon of troubleshooting beside him. I tried to search for updates/drivers solve the problem and nothing works. It says ' unknown device is not a driver. My fax, copier and scanner work, but the printer does not work because there is a problem with my laptop. I could not use my printer because I was out of ink for 2 months, then I buy ink and now I can't print! Ink for a Lexmark is not cheap.
I hope someone can help!
Karen
Because my printer is a Lexmark, I had to go to the Lexmark he site and search "Drivers" under which specific printer, you have it downloaded on my computer and loaded this way to connect my laptop with my printer.
Maybe you are looking for
-
I have a Camileo X 100. Yesterday, when I turned it to the record, the display shows the Toshiba logo and then it went blank.The indication on the buttons on the camera lights were lit at the start and then (when the display went blank) had been arre
-
Yoga 2 Pro: plugged headphones problem
Alrighty, I have a lenovo yoga 2 pro and I recently noticed something really weird. Whenever I plug my headphones on one side (left side) will play the music louder than the other side. At first, I thought that it was my helmet but, I tried my helmet
-
One of my Xbox controller does not work. When I turn on my Xbox and I opened (for example) Minecraft. He looks up at the sky without touching me same controller! Help, please!
-
I've could connect to a https with window XP site but could do is no longer with window 7. I will be normally requested "secruity alert" in XP but not in Windows 7 ". What should I do? How could I get for these wedsite https in windows 7 as I did in
-
Catalyst Control Center - the host Application has stopped working
my laptop rpet Catalyst Control Center: the host Application has stopped working. What should I do?