17-g133cl HP: HP 17-g133cl network lan drivers win7
HP 17-g133cl network lan drivers win7
I bought a HP 17-g133cl and I took off Win10 and reinstalled Win7 (due to the work win10 platform does not) and I can't find a driver that will seek to get the realtek network lan to work.
(all device drivers must be installed thought if I can get lan driver for work can get other drivers online)
You are looking for the driver for win7 64 bit
Any help would be greatly appreciated!
Thank you
You are the very welcome.
Yes, normally if you receive notification of deep sleep, which means that you will install the first chipset driver, reboot and then install the ethernet driver.
See if the chipset directly from AMD driver works for you. Install and reboot. 1 driver on the list.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Tags: Notebooks
Similar Questions
-
Re: Satellite C850 - 13 H - network LAN drivers need
I bought Toshiba Satellite C850 - 13H, nowhere I can not find drivers for network LAN, please I need your help
A Win7 64 bit
You can find the driver on the download page of Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
All you have to do is choose your Satellite C850 and chose right short model number (PSKCAE).
Please check.You will find the driver version 7.48.823.2011. can find you it?
-
CQ58-d00SM - lack of 32-bit network adapter drivers WIN7
Hello
I'm unable to locate on drivers HP Web site of HP 10/100 Base-T PCI LAN adapternetwork card. I'm using 32 bit WIN7 on laptop CQ58-d00SM.
Where can I download the drivers?
Thanks for the help!
Marin
Hi, sailor:
Try the third driver listed at the link below.
-
HP Pavilion g6-1d73us Notebook LAN DRIVERS WIN7 64 bit
Hello
Had to reinstall windows on my PC and after my computer didn't find the drivers for the LAN card (wired).
I look at your site can not find it there.
Please advise!
Thank you
Hello:
Download and install the 3rd driver on the list...
-
Satellite Pro L40 - network LAN adapter does not connect
We had a satellite pro L40 for about a year and have connected to the internet through our wireless home network using the connection Wireless on the laptop.
My son has now gone to the University and tries to connect to a wired connection via the network adapter, but without success. He tried 3 different cables and different takes the work of others within its rooms, so we know the cables and connections to work.
Setting up the program guard in him asking to connect the cable, which he did. Adapter network said he works in the control panel and new network connection section, it says to connect the cable.
Any ideas would be welcome!
Steve
What is the "Installer"?
Try to disable the firewall and update the LAN drivers on the Toshiba site.
-
I've recently replaced under warranty, the HD on one of our laptops. This laptop has been previously connected to our local home-network page via a Belkin wireless router. The host computer is connected to the router via an Ethernet cable. I'm currently trying to re-establish the connection of this laptop in our home LAN. already, it is correctly connected to the internet through the router, but it cannot access printers or files on other LAN computers until I can load network LAN settings. The problem is that the Network Wizard on the desktop of the host (Windows XP) allows the reproduction of these settings on a tape player, while the Office has only a CD/DVD drive. Any ideas?
You don't need a "network configuration" disc (ask the wizard for setting up the network to a disk, not a "tape", but your laptop probably doesn't have a floppy or by car).
If you are already connected the laptop to the router enough for Internet access, all you have to do is to run the "Network Setup Wizard" on the laptop. See this old, but still valid, MS MVP Malke advice network.
We consider that you have Windows XP on the laptop. If you have problems, when you post back, be sure to include the version of Windows (XP Home, Vista Home Premium, Windows 7 Professional, etc.) on the laptop, including service pack.
Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:
http://TechNet.Microsoft.com/en-us/library/bb727037.aspx
For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).
Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.
A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.
(B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.
C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:
Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm
D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).
E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.
F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
-
Interruption of the connection with the WIRELESS network and network LAN adapters
After a virus attack that I got from a USB key, I lost contact with the WLAN and LAN network cards. Manage to clean your computer of viruses, but cannot access the network LAN and WLAN cards. They do not appear in Device Manager. Tried restoring the system to a point of backup in the time before the event, but it does not help. Tried to download and install the drivers, does not work either. Vista should find the network adapater after reboot normally, but this does not happen.
* original title - lost contact with the WLAN and LAN network adapters. They does not appear in the device even Manager after restarting Windows Vista. I tried to download the drivers, but it does not either *.
Hello
You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope that information was useful
-
To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd
If any document available please send my email id
Thank you & best regards
Martine
Hello
Thanks for posting your query to the Microsoft forum.
Please see the suggestions in the following threads:
Let us know if you need more assistance. We will be happy to help you.
___________________
Thank you best regards &,.
Isha Soni
-
one of the VM cannot access network LAN
Hello
I configured 3 VM on an ESXi 4.1 (see attached jpg file). one of the virtual machine (GSPPBPCDBVM), it cannot access the network LAN, even cannot ping Bridge but can ping GSPPBPCVM after I walk today, previously, it was ok. The other 2 VM can access LAN network. What could be the problem?
GSPPBPCVM (128.1.8.x)
GSPPBPCDBVM (128.1.8.x)
AEPAD (10.8.1.x)
vmnic1 (to connect to the local network virtual 128.1.8.x)
vmnic0 (to connect to the local network virtual 10.8.1.x)
Thank you and best regards,
Kelvin
With the configuration you have posted, you have a 50/50 chance that none of your VM will have access to the network, since you have 2 NICs connected to two different VLANS and virtual machines are assigned to these network cards based on the virtual switch port (assuming you use the default settings).
To properly set up the network, you have two options:
1.) VLAN tagging on the physical switch ports (what you have)
In this case, you will need to create a second vSwitch and attach the second NETWORK card to this switch. Then connect virtual machines to the vSwitch and port group that is connected to the switch port VLAN corresponding physics.
2.) VLAN tagging on the virtual port group (this is what I recommend)
Configure the ports on your physical switch as the trunk (or ports 'labelled' If you use Procurve switches), create another port VM on vSwitch0 group and set up VLAN tags on the gropus (VMKernel, VM Network1, VM Network2) port
Take a look at http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf for more information.
André
-
Satellite A100 - Sk9 PSAASC - Lan drivers does not exist?
I bought the laptop Satellite A100 Sk9 for school and we are required to put win xp pro top. I formatted my machine and went to do a fresh install of xp pro and have found that there is no work LAN drivers for this laptop.
There is a download for something I thought was the LAN driver and after that I downloaded this file (using the wireless) and extract there is no driver file in archive all that there some dll and an uninstall application, but nothing else.
Can someone help me with this please? I am an urgent need for this driver because he must use the connection cable in the classroom.
HELP ME :)
Where did you find this LAN driver?
It seems that this device was designed for the Australian market and therefore, you should check the Australian Toshiba page.However, you have already downloaded the driver.
You can try to install in the Device Manager. Simply enter in the Device Manager, select the network card and choose install driver option
Then, choose the driver downloaded on the HARD drive and finish the procedure... -
I had to get out my laptop with all my files cause I giving it to a friend I got 10 download version inside windows. I removed thinking my previous windows version 7.1 was there, but I guessed wrong. In any case, I contacted Microsoft got windows 7 is a dvd of it and restore laptop well the drivers for the bus network and eithernet controller and device CPI and sm download for me Conect on the internet. Already went to the area of drivers and downloaded the driver for this laptop and installed them and nothing happens. Computer worked great until I deleted windows 10 latter. Could some please help me I don't know what to do anymore.
Hello:
There are some missing drivers on the support page, which is probably why you have questions...
HP never includes the chipset drivers for laptops equipped with AMD processors and chipsets. Him do not include the well based for their laptops Intel chipset drivers. Don't ask me why.
Then... To get the controllers smbus and usb work, you must install the drivers for the chipset directly to AMD.
You want the first file on the Web page. Install and reboot the PC.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
The ethernet driver is listed on the support page...
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp54998.exe
The driver for the PCI device (I think that's what you meant to type) is on the support page...
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp54995.exe
The driver of the wireless adapter is not on the support page, so you need this...
This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the laptop models running a supported operating system.
-
Satellite A300-1MC: network controllers drivers are not installed properly
Hi guys...
My first lol just purchased Toshiba and I can't ge the wireless to work?
Toshiba A300 - 1MC Intel T5800 3gig of ram 20gig hard drive Vista Home wired Internet access works ok, but in Device Manager it says my network controller drivers are not installed properly?I have reset to setting faactory and reinstalled everthing but its still the same.
Ideas a BIG help thanks in advance.
This strange s
Usually, using the operating system recovery disc must be set to the factory setting and everything should be ok.However, I recommend first upgrading the BIOS, then the LAN/WLan card driver.
The card chip Realtek (Realtek 10/100 Base-TX) LAN and WLan card chip is Intel (Intel 802.11 a/g/n WiFi Link 5100AGN)Download the WLan driver from this page Toshiba WLan:
http://APS2.toshiba-tro.de/WLAN/and the LAN driver can be downloaded from the Realtek page, or on site pilot European Toshiba too.
Remove/uninstall the old drivers and then install the new drivers.Good bye
-
Pavilion G6 series: look for network adapter drivers
Hello
I need a driver for network controller
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
PCI\VEN_10EC & DEV_8176 & CC_028000
PCI\VEN_10EC & DEV_8176 & CC_0280and ethernet controller
PCI\VEN_10EC & DEV_8136 & SUBSYS_1662103C & REV_05
PCI\VEN_10EC & DEV_8136 & SUBSYS_1662103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200Computer laptop HP Pavilion G6 series
Thank you
Rebecca
Hello:
You need these drivers...
This package contains the installation package driver for the controller LAN Realtek RTL8188CE wireless in the notebook models and operating systems.
File name: sp53753.exe
This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.
File name: sp55031.exe
-
Ethernet, the network card drivers missing after I restarted my laptop
I have a portable 2000, windows 7 64 bit, I have restarted my laptop because it was slow and now the network and ethernet controller drivers are gone, can someone please help!
OK got that...
Here are the Ethernet services and network card drivers:
Realtek LAN driver (LAN):
RALink 802.11 Wireless LAN adapt:
-
Recenty purchased
HP PC laptop 15-r010si (ENERGY STAR) (J5A70EA)
Now, I managed to remove Windows 8 - what mission and nightmare.
I installed Windows 7 32 bit professional.
I'm stuck now that I can't find the 32-bit versions of the following drivers that I need.
Chipset drivers, video & Audio drivers, interface network (NIC) drivers.
Can someone point me in the right direction for these please.
Hello:
First install the chipset driver and restart.
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
Graphics card:
https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24246
Audio: Accept the agreement. Download and install the driver first on the list.
LAN:
Maybe you are looking for
-
I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s
-
Max OR simulated PXI devices that are not present in the Labview project
I added a map of e/s digital NOR-PXI-6527 simulated to my MAX NI PXI's, but it does not seem possible to access this IO card simulated in a Labview project. Is this normal?
-
where the property page?
I went to help and support without help okay. How can I restore my computer to an earlier date that I know it was working well at this point
-
Windows Live Essentials 2011 error Code Update: 0 x 80280008
I have problems to install an update for Windows Live Essential. She said that I have a flavor of different construction and I get the error code 0 x 80280008. How can I continue?
-
Error 0 x 80070057: the parameter is incorrect.
I recently download Overdrive Media console to download books from my local library. When I try to download WMA audio books, it gives me this error. Download MP3 Audiobook quite well. Can someone help me?