1Z0 - 006 (foundations of database) has been retired?

Similar Questions

• Database has been modified.  Save changes?

  After the execution of some commands and try to close SQL Developer, he always asks me "database has been modified.  Save changes? ».  Most of the time I only use select statements.  Is it safe to answer yes/no?  What happens if I have made an update to a table.  It will get rid of updates, even if I issued the commit; command?

  Thank you.

  In the case of only making selects, this prior discussion comments should enlighten us:

  Validation required after a selection on Dblink

  And if you do your own agrees, of course, pending DML changes are involved - you answer "No" to an offer to record is then irrelevant.

• Is it possible to recover a database with the copy of data files (cp), while the database has been opened?

  Hello

  We know we need to do a backup of an oracle database by using the appropriate tool, in most cases the rman. But we have in our society, a person who helps us with the backup of all the databases oracle we have. Thus, in addition to the rman backups, we do a copy (cp) with the open database of all files in oracle database, (without start backup) including of course spfile, controlfile, etc.. My question is: can recover us my database using this copied data files? or are we just wasting disk space on our backup environment?

  Kind regards
  Melo.

  We're doing a copy (cp) with the open database of all files in oracle database, (without start backup) including of course spfile, controlfile, etc..

  As EdStevens said, it's essentially a backup without value. When you copy files from a backup ' hot', there may be inconsistencies in the blocks of the file as transactions actively edit these blocks while the copy is made. Mechanism of Oracle backups hot managed by users is to put the database or tablespace in backup mode, copy the files, and then the end backup mode. Without this mechanism, the chances of being able to restore from this backup are very, very thin.

  My question is: can recover us my database using this copied data files?

  My question is... have you tested recovery? If the recovery has been piloted, then called the answer to this question. Please read the end of this blog post for more information:

  Blog of Peasland before necessary recovery database backups"

  See you soon,.
  Brian

• Why my idea in 'Ideas of database' has been removed?

  When I call my idea, I get this message:

  "This idea has been removed. It is only visible by the space administrators, moderators, and content authors. System administrators are able to restore this idea of a State not deleted in the idea of the administration console management page. »

  but with no explanation why.

  How can I get in touch with someone who can explain this to me?

  Unless the Admin have implemented without letting us mods know (or maybe I missed it?) then the only space of ideas to post ideas is space ideas community Oracle (Oracle community ideas)

  Where the 'database of ideas' that you speak of?

  My guess is:

  one) you are trying to post in another space of ideas that still needs to be activated to allow ideas to be displayed

  or

  (b) you send ideas about the datase within the Oracle Community ideas, which is for ideas on the community, any ideas on databases, hence a moderator/admin is likely to remove (although usually I expect to post a comment explaining why).

• CF Bug database has been down for anyone else?

  I tried to access the ColdFusion bug database to make a few suggestions, but the site has been down for almost a week now.  Anyone else having this problem?  I emptied my DNS cache and re-registers it.

  What's weird is when I ping cfbugs.adobe.com, I get an IP address of 192.150.14.191 and she is resolved to a host name of mmbeta.macromedia.com

  I also tried bugbase.adobe.com, but to no avail.

  Try to clear your browser's cache and cookies for adobe.com.  There is a known problem with redirection loops and cookies with the bugbase.

  -Carl V.

• Computer has been recently hijacked with "XP security alert" want to pay me to analysis and clean. Knew it was funny. Managed to get rid of the virus (in appearance) and did a system restore. Since

  Computer was hijacked yesterday with "XP security alert" want to pay me to analysis and clean. Knew it was funny. Managed to get rid of the virus (in appearance) and did a system restore. Since then, have been opening several programs such as anti-virus, security, most of the elements in the Panel of control etc. Always can access internet, but only through IE and Mozilla not. Cannot open Outlook Express and need to connect to the sky for e-mail. Impossible to download and run programs as computer application which program I use to open or run the said downloads.  Help!

  It would seem that your registry database has been changed in order to disable the functioning of all. EXE file. You need to restore it, but cannot use regedit.exe to do. Solution: make a copy of the regedit.exe regedit.comappointed.

  Open a command prompt by typing the Windows key + R and type cmd then hit . Type in this commnd:

  copy c:\windows\regedit.exe regedit.com

  ... and click on . Next type:

  Start regedit.com

  ... and click on .

  In the RegEdit program, navigate to the registry:

  HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  In the right pane, double-click the (default) value. Delete the current value data, and then type:

  "%1" %*

  (i.e.: quote-percent-one-quote-space-percent-asterisk)
   
  Close the Regedit utility. Your. EXE files must be start normally now. If the problem persists, or redone surface shortly after this procedure, your computer is still infected. In any event, the execution of full scans with MalwareBytes and your own virus anyti is recommended.

  The complete procedure (for XP) is detailed here.

• "" ORA-04062: SIGNATURE OF THE PACKAGE "apps.fnd_date" has been changed

  Hi all

  EBS R12.1.3

  OL6.5

  We have an instance of clone TEST taken instance PROD.

  For our Production, we have:

  > appprod - level apps

  > oraprod - db level

  Then we cloned TEST such as:

  > apptest - level apps

  > oratest - db level

  Then we applied many fixes on test for validation or 'tests '.

  Now after 6 months, we need current data production to simulate past editions. So I restore rman PROD sauvegardΘ on UAT data so the data are now more recent.

  But I do not to reclone level apps (apptest) so the patches will be still intact.

  Is this a correct process? The database has been modified, but the apps layer was always the same?

  So far, we have 3 errors

  ORA-04062: signature of the package 'APPS '. "IBY_DISBURSEMENT_COMP_PUB ' has been changed

  "" ORA-04062: SIGNATURE OF THE PACKAGE "apps.fnd_date" has been changed

  error msge: FRM - 40735:PRE - F Trigger of the ORM raised unhandled exception ORA-01403

  
  

  Kind regards

  JC

  Have you checked error logs? Check if its related to this.

  Refreshing Apps also PROD level now? or is it the old application layer on which you run just autoconfig?

  Running Adcfgclone at the level of the Apps fails with ' mscmatlab.sh: line 45: uncompress: command not found "(Doc ID 1529335.1)

• If the database has INCREASED

  Hello
  on 9.2.0, under Unix
  the alert log and another of the trace files are purged daily. Today, we have only those of April 30.
  
  How can we know if the database has increased on Thursday and Friday (25 and 26 April)?
  
  Thank you.

  Assuming that the database has not been rebooted since then, you can query the STARTUP_TIME of V$ INSTANCE to see where the instance was started. If the database has been restarted since that time, you can't possibly check unless you have another newspaper somewhere.

  Of course, it's probably a mistake to purge the log information daily, especially if you are going to ask this kind of question.

  Justin

• View MTTR has been temporarily disabled

  Hello
  10 g R2 on Win 2003, I have message in next alertlog:

  MTTR advisory was temporarily turned off because FAST_START_MTTR_TARGET was altered.

  Should it be enabled automatically?
  How can I dump on?
  Thank you.

  I think the key word is "temporarily".

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmtunin.htm#sthref828

  "To enable MTTR Advisor, set two STATISTICS_LEVEL and FAST_START_MTTR_TARGET initialization parameters."

  "If MTTR Advisor is currently enabled, then V$ MTTR_TARGET_ADVICE presents the information Advisor collected." If MTTR Advisor is currently DISABLED, the view displays information collected the last time MTTR advise was IT since the start of the database, if necessary. If the database has been restarted since the last time that the Advisor MTTR was used, or if it has never been used, the display will show all the lines. »

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/statviews_3153.htm#REFRN23423

• My .mdf database file has been corrupted

  My .mdf database file has been corrupted, and I have no way to get my S.i. schema tried with some software available on the internet, but its turns out that each of them being the demo versions give back the repaired file. Are there other ways by which I can restore my db? I use MS SQL 2008

  Hello

  Sorry for the delay in responding to this post.

  The problem is related to .mdf, which is corrupt and you are using MS SQL 2008, ask you to send the query to the following TechNet Forum to get help.

• How to check if a fix has been applied to the database?

  It is easy to know which patches have been applied to the software with opatch lsinventory oracle. But what about the database? How will I know if the corresponding sql code has been applied?

  My real problem:

  I have an environment (Linux) with 12.1.0.2.4 (so no later than patchest). If I create a new database (without worrying if I use a model predefined by default as "Generalist" or create a database of "customized") I do not see that the power supply has been applied. My theory is that the template should not have applied patch while the custom database needs.

  I checked with

  SELECT the version, State, bundle_id, patch_id, bundle_series
  OF dba_registry_sqlpatch;

  
  

  but the two database returned no returned lines.

  If I run datapatch it applies the patch so after that the output of the query looks like this:

  PATCH_ID VERSION BUNDLE_ID BUNDLE_SERIES STATUS

  ---------- -------------------- --------------- ---------- ------------------------------

  20831110 12.1.0.2 SUCCESS 4 PSU

  
  

  but this isn't what I expected as a new database should be the most recent version of the sql scripts.

  According to the README file for patch 20831110:

  3.4 patch Instructions in post-installation for databases created or upgraded after the Installation of the PSU 12.1.0.2.4 in the Oracle home

  You must perform the steps in Section 3.3.2 "loading change files in the SQL database" for any new or upgraded database.

• I would like to know how our organization can recover the license information when electronic mail set up to order the license has been removed and the person retired, please?

  We are a school in Mac OS X 10.6 (Snow Leopard) with Rosetta to Photoshop CS.

  We would like to upgrade the operating system to a newer version, but we are unsure of our status as a license to this product.

  The person who held the access on behalf of Adobe has retired and their email address has been removed. We don't have access to this email account.

  How can we assign a new Member of staff on our behalf in order to determine what licenses we have and how we can buy new licenses for all additional Apple computers to add to the network.

  I tried to navigate the support area, but I found I was going in circles and the titles and descriptions listed did not address our problem.

  Any help would be greatly appreciated.

  Kind regards

  Keith

  Ok... I'll accept that YOU're doing your job, and that others are incompetent or lying to cover up the fact that they did not do their job

  > The person who held the access on behalf of Adobe has retired and their email address has been removed. We don't have access to this email account.

  If you know the email address, you can contact Adobe technical support directly to get the information you need

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• The database for DSTUpdater - DStu.PRC has been deleted on the handheld. Settle for the backup in the file Archive.

  Can anyone tell me what it is and is it important? I don't know how or when it has been deleted.

  Thank you

  radtech1

  and you got this after you install the DST update? you've seen this error in the log of hotsync, right?

  try to HotSync again and see if the error will be gone. This usually happen once only, so in the next hotsync, it will be successful.

  Message is about: Treo 680 (unlocked GSM)

• How to check where the table field has been used as a foreign key in the database

  Hi I have a field in my table Office I had office_code field, this field has been used in the tables of diffirent as foreign key is a sql I can wirte to see all the tables that have used this field as a foreign key
  
  Edited by: adf009 09/05/2013 10:37
  
  Edited by: adf009 09/05/2013 10:38

  Check this box

  SELECT * FROM user_constraints WHERE table_name='EMP' and CONSTRAINT_TYPE='R';
  

  Type = 'R' means referential integrity constraint type.

• This site has been blocked for you!

  Steps to access this site again:
  1. click on unlock the button below
  2 choose the survey to verify you are human
  3. complete survey
  4. continue to use this website
  Click here to unlock

  This site has been blocked due to your recent activity. Your actions have been marked as spam bot like, visit this site again, follow the instructions on the left. This is done for security reasons. Please take the time to go through the verification process to restore that allows access to Web sites blocked, thank you for your time!

  Please HELP, thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked