2335dn does not turn on and make clicking noise

Similar Questions

• My laptop does not turn on and does not go to the Welcome screen.

  My computer says its update and there's just the TI shuts off and it resets again.

  Try the following steps:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve it:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion DV7-3162nr: HP Pavilion DV7-3162nr does not turn on and the battery light flashes during charging

  I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn.

  The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button the laptop would try to start then turn off after about one second. However most of the time when when I press the button nothing happens.

  I took out the battery and tried to immediately start the alternating current, but the laptop is like there is no power. The led near the power connector is on the AC adapter is plugged in. I checked the tension between the adapter and it is correct to about 19 volts, I even loaded to 1.5 Amps and voltage remained close to 19 volts. I tried now on the button for more than one minute with applied power (no battery or AC) and no change when I tried to start with just AC.  The battery is old, but shouldn't the laptop run on just the AC adapter with the battery installed? I do not think that windows 10 has done this, but it's a weird coincidense that he died during the upgrade.

  I read about simular problems with flags of HP but nothing exactly like it.  The fact that I can not turn on the laptop with just the adapter seems to be a problem really bad.

  Anyone has any ideas I can try to let me know

  I was able to fix my laptop.

  I thought that it must be a hardware problem, because the laptop would not run just the adapter. And the adapter was good, as I said, he had the right voltage and can support the load.  So after looking at a lot of U tube videos on how to disassemble laptops and looking for schematics on the laptop which I couldn't find. I disassembled the laptop and a beep on the load circuit and it showing. What I found, it was a bad MosFet at the beginning of the charging circuit. The MosFet P/N P0603BDG has shorted door to the Source.  I was able to get the part of China via Ebay for less than $5.00 total and it took a week to arrive.

  Now, the laptop charging the new battery and works very well. I could have found the bad MosFet faster if I had diagrams. Does anyone know if it is possible to get the schematics for this HP laptop? I found a manual and it helped a bit to disassemble the laptop, but he had nothing on the main map.

  This problem is now solved hope it helps someone out there.

• I have iPad Air and have never used my application pages. He now does not turn on and just displays "pending". The application does not open and I would like to download an application on pages to activate my use. How can I correct this situation, please?

  I have an iPad Air and have never used the app to Pages. For some time, it has not been enlightened and shows 'pending', but does not open. Now I want to resolve this situation. Any ideas, please

  Hello. It seems to be hung trying to complete the installation. You can try to remove and reinstall. To remove it, go to settings > general > storage > storage management. Expect that the apps fill, then on the Pages. You will see the used storage and a delete option. It allows to remove the existing copy. Then go to the app store, in respect of the purchase, you will see the Pages with a cloud beside her. Tap on the cloud and it should install again.

• Why is my new iPad pro does not turn on and I have to do a hard reboot?

  Recently, I just bought an iPad pro and it does if I hard restart and it will turn off by itself... Help

  As you'll see in five hundred posts in this thread , this is a common problem. Apple this page acknowledges the problem and says that they are working.

• My mac does not turn on and the battery is fully charged

  I have a mac book pro, it will not illuminate. It is fully charged. Any sugggestions?...

  Can turn it on when it is connected to the power outlet?

  FWIW, you do not run iOS on the MBP - what version of Mac OS X you are on?

• The copy does not copy everything and makes the partially transparent pixels

  I had this happen several times now when I copy a selection it will copy everything it contains exactly as it appears in the reference. It copies sometimes more and sometimes he makes outside partially transparent pixels. It's a bit annoying when you do the SNES. A way to disable this option? See the pictures attached for reference.

  

  

  This brand as a moment DPEP.

  Artur: Try to do this with the option of "smoothing" out on the magic wand Options bar.

  My guess is because this option is enabled and that your work is so small (because it is based on the pixels), Photoshop is interpolate the selection to include a "smoothing" to transparency.

  This work has a hard edge, so there is no need of anti-aliasing.

• Satellite P500 - fan too loud and makes clicking noises

  I recently bought a Toshiba P500 - in late October / early November, and recently the hard drive continuously flashes when there are noises rattling from the laptop (even if im not doing anything)

  Also my fan will get random REALLY loud but usually run mediumly hard all the time, I rarely hear really calm even when I start it first to the top and nothing is running

  The laptop itself is on my desk and high upward so that the fan is fully ventilated, as the surface is regularly wiped away (about twice per week)

  Hello

  If the clicks or hit its happening with disk HARD high use and sounds like a light tap with a light hammer on wood then this is your HARD drive and not necessarily fan.
  Fans usually have a hummimg and more regular sund whining when not.

  First thing I would do is take you a laptop somewhere cool temperature and prepare to back up the files on your HARD drive if you have not already.
  Second thing, it is to install a utility that will allow you to analyze the indicators SMART for your HDD (s) - mine has 2 drives x 500 GB, that should tell you if the HARD drive it's about to die.
  There is also a diagnostic utility called PC Diagnostic tool available via all Prorams/TOSHIBA/utilities if you have it installed.

  I would look then by contacting your local Toshiba support center to get your macine checked and covered in any warranty replaced elements.

  BR /.
  Rob

• Satellite C660 - 23 M won't turn on and makes a high pitched noise high

  Hi I'm new here

  Ive had my laptop for about 2 years and she had a lot of problems - broken screens, dust in the fan, etc.

  yesterday I used it as usual when it off completely without warning.
  I'm used to is happening because my laptop overheats and turns off like that on a regular basis.

  However, when I turned it back on, it makes a high pitched noise that kept getting more high until the laptop turns off again.
  I think the noise of the fan.

  There was also a slight smell of burning plastic.
  My laptop does not turn on and when I plug it in the orange power light does.

  PLEASE HELP I HAVE MY ENTIRE ITUNES LIBRARY AND SCHOOL TO WORK THERE

  Also last week the hing on one side of the laptop is broken.
  The screen still worked and all the wires were still intact

  yesterday I used it as usual when it off completely without warning.
  I'm used to is happening because my laptop overheats and turns off like that on a regular basis.
  .
  .
  .
  There was also a slight smell of burning plastic.

  To be honest, all the details do not sound very good...
  Everything looks like some causes of serious hardware problem laptop cannot be turned on.
  I can't say for sure what the problem is here, but probably the motherboard or the CPU is dead.

  In any case, your data on the HARD drive should not be affected, and I guess you could get access to your entire iTunes library. You must remove the laptop HARD drive Bay HARD drive and you will have to use an external USB 2.5 "HDD caddy to connect the HARD drive from the laptop to another computer as an external USB HDD.

  This will allow you to move forward and back up the data to another job good HARD drive.

• Peripheral 2270Dw HP printer. Toner replaced with unit other than Brother and Toner light will be will not turn off and the unit do not print.

  replaced with Non-frere unit "and" toner light toner unit does not turn off and the printer will not work.  How can I reset?

  Hello

  Do you use the HL-2270DW printer?

  Follow the steps in troubleshooting mentioned in the articles below:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Print the problem - troubleshooting

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faq_list.html?reg=us&c=us&lang=en&prod=hl2270dw_all&cat=112

  If after following the steps of troubleshooting mentioned in the article above the problem persists, I recommend you contact the manufacturer of your printer by clicking on the link

  http://www.brother-USA.com/support/custserv.aspx

  http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/monolaserpri/hl2270dw_all.html?reg=us&c=us&lang=en&prod=hl2270dw_all

  He hopes to help!

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

  Hello.
  I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

  I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
  Could someone help me please

  Update the BIOS to the current version. A F.24. The direct link to the download is below.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

• A Wi - Fi connection does not turn off correctly

  When I turn off Wi - Fi in the quick toggle or settings page it does not turn off and it is left running. (I have not 'analysis always' either) I can see in the graph of the battery when I turn it off for a while it always shows the green bar on Wi - Fi. I had this problem on 5.1 on my 4g (2013) g bike and I don't always.

  This seems to be a matter of google - I have it on non-Moto phones as well. The only thing to do is to restart with the Wifi turned off.

  I don't remember if disable the Wifi in the precision of the GPS solves this problem or not. I decided to live with it for now.

• My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with option to order and reconstruction, and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.

  If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.

  What version of Mac OS X are you running?

• Escape Rosecliff Island made it starts on level 4, I just bought on Apple Store and puzzel does not turn on right click.

  Escape Rosecliff Island do you start on level 4, I just bought it on the Apple store and the pizzel does not turn clicking right, as shown.

  Please repost your question in Forum games: http://social.answers.microsoft.com/Forums/en-US/vistagaming/threads , where game experts will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.