My laptop does not turn on and does not go to the Welcome screen.

Similar Questions

• Does not load before the Welcome screen

  I get to the sign in screen on vista and I put my password and sign in however it will not load past the loading screen.

  Hello

  What would you say if try you it in safe mode? It will allow you to open a session?

  To access safe mode, press F8 just after the screen logo POST or original system manufacturer and before Windows starts to load. This should give you a boot menu where you can select.

  If you are able to log on successfully in safe mode, you can start the troubleshooting steps described here:http://support.microsoft.com/kb/929135

  If you are not able to connect to any account in safe mode, including the default administrator, please post back with some information about how and when this problem started.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows 7 does not start after the Welcome screen after password

  I've been running Windows 7 for the last 10 months with no problems until a few days ago. The PC starts fine, goes to the password screen, accept the password and then adheres to the Welcome screen.  The PC is not frozen, the cursor moves and the circle just keeps running load.  It starts perfectly in safe mode and safe mode with network.  This problem started to occur intermittently, but tonight, it took 4 re - begins to initialize.

  Would be grateful for any ideas.

  Hello
  
  a. did you software/hardware changes to your computer before this problem?
   
  Step 1: Try to perform the clean boot in safe mode and check. This is perhaps due to some third party software installed on your computer.
  Reference: http://support.microsoft.com/kb/929135
   
  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Measures to check the application event log:
  a. Click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Problem installing windows 7. It will not go beyond the Welcome screen.

  Hello people,

  Good so I recently bought an SDS and trying to do a clean install of windows 7 but it doesn't let me get past the Welcome screen. Before even the colored balls appear and it just hangs there. I am really frustrated and tried a few things but nothing I try seems to work.

  Any help would be so appreciated!

  Hello a tad noob.

  It shows the SSD at all? I would check to see that it is indeed to be picked up by the BIOS, and if not, check the cables.
  Sometimes, the Windows installation can chuck a fit when it detects a disk with a sector of boot/MBR not valid and won't install it. To resolve this problem, you can try the following
  1. start Windows 7 disc.
  2. when the Welcome screen is displayed on the Windows installation, press SHIFT + F10, which will display a command prompt.
  3 type 'diskpart' (without the quotes) and press ENTER.
  4 Type "list disk" and press ENTER.
  5. If all goes well, you can see your SSD in the list. You should see a number identifier. Now type "select disk X" (where X is the number of your SSD) and press ENTER.
  6. type 'clean' and press ENTER. He will write an empty MBR, YOU WILL LOSE ANY DATA ON THE SSD if you had anything on it.
  I hope that one of these tips helps you:
  )
  suggestion of technocrat.

  Let us know if that helps.

  Marilyn

• Help! My HP TouchSmart laptop will not go beyond the logo screen!

  My HP TouchSmart tm2 with VL618AV product number lights after the logo screen. I really don't understand why it is happeniing because it's just more than a year. I have Windows 7 and there are errors on the computer. Please help me.

  Yes-HARD drive is the hard disk. No way to know, without more testing, if it's hdd or other material causing a no don't start machine. Try to remove to see if you get any further as I mentioned above.

• I've downloaded first 14 elements successfully to my iMac in early 2008, but it does not open before the Welcome screen.  Does anyone know why this may be?

  Photoshop Elements works very well. I also tried to download previous versions of Premiere Elements, but none works. I have also updated for the last OS and meet all the requirements of the system.

  eillenl

  What is Mac OS x?

  If you don't have it already, please see system requirements

  System requirements | Adobe Photoshop Elements

  1. latest version of QuickTime installed on your computer?

  2 problem exists with and without antivirus and firewall disabled?

  3 video card/card graphics driver up-to-date according to the web site of the manufacturer of the card?

  4. you say that Photoshop Elements works fine... is that Photoshop elements 14 and was part of the first Elements 14 Mac purchase?

  Let us begin here and decide then what then based on the details in your response.

  Thank you.

  RTA

• Profile picture will not appear on the Welcome screen

  Hi guys

  I think I'll have problems connecting. After age, I finally downloaded a profile picture (which is different to my avatar forums), I thought should appear on the home pages of all my CC2015 programs as well. After you upload a photo and get approval from the moderator, I opened a couple of my programs, but by default, empty picture placeholder has not updated and my image does not appear, for example in the Pr or Ps CC2015. Yet when I click on the support of the image that need me on my Adobe account page, so it is connected.

  I tried syncing Pr, but kept getting this error message:

  

  

  So I wonder if someone could tell if there are a few settings I have no right or configuration needs. Not a large number, only one of these irritations which grids that I wonder where is the problem...

  Kind regards

  Graham

  PS
  My computer is a Dell Precision, M6700 running Win7 64-bit, SP1

  G.

  Not being is not able to synchronize creative cloud is probably the problem. You should get this works so you can use libraries, etc. They help at all?

  Adobe Creative Cloud File Sync | Known issues

  Error: "unable to sync files" in the cloud of Adobe Creative

  Basic timing settings workflow: synchronize your settings | Adobe first Pro CC tutorials

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Windows 8 does not not to the Welcome screen and the start option advanced

  I met a very strange situation.

  1. I first put my system into hibernation and walked away for a while. Then when I tried to turn on the system, it freezes at the Welcome screen. I tried the strok key (Ctrl + Alt + Delete) but nothing happened. I noticed that the ' FN ' on my laptop works very well! I could turn on and turn off the Wifi with them. But the system has not responded to all other keys and my touch pad.

  2. I tried waiting for the system to respond for a long time. When I noticed that the little light on my laptop showing the status of the HDD stopped flashing, I thought that the system could already went wrong so I hard reboot the system.

  3 then, strange thing that happened:

  (1) first is the logo of my BIOS flashed on the screen and disappeared, which has never happened before.

  (2) then the system told me that he prepares the update. But I remember turning off the automatic update and I had not installed update before the system went wrong. Although I remembered that there is a warning to the login screen that there is some new important updates and I should install them.

  (3) the system is restarted automatically when the increase is 30%. After this reboot, the system maintains hang at as before welcome screen.

  4. I've tried several things and hard reset for many times but nothing has changed.

  (1) I tried to disable the quick start to the BIOS.

  (2) I've tried allowing CSM (disable UEFI in legacy mode)

  (3) I tried to press F9 to start and got into the advanced boot options screen. However, all there hang two! My keyboard and mouse are both inadmissible.

  (4) disconnect all connected to my laptop.

  Then I'm lost. I can't repair or restore my system. I think that my keyboard works fine because I can change the BIOS setting to use. Now, I'm at my wits end with. Can anyone suggest anything?

  Update:

  Turned history that I tried to plug my USB mouse to the laptop. It worked, and when I connect my USB keyboard that works too! But minutes after I logged on successfully to Windows, I got the WORKER_INVALID and restart the system.

  I found this post which has almost exactly the same problem with me (I use an ASUS laptop too!). So I uninstalled my driver warned of the gesture, and then the system has not crashed over.

  But my problem has not been resolved. I downloaded and installed the latest driver of ASUS and always found my touch pad and the keyboard does not. I also realize that even in a different operating system on my system (LinuxMint), my touchpad and keyboard will not work.

  To summarize:

  Now I can use an external device (USB keyboard and mouse). But the built in keyboard and touch pad does not work. The latest driver for ASUS (ASUS Smart gesture) and ASUS ATK Package driver does not work. Strange thing is that when I open the computer, can I use my keyboard and even type in the Linux grub shell. But once the system got loaded, both in Windows and LinuxMint, the keyboard and the touchpad don't work.

  Now, I suspect my BIOS went wrong, but I do not know and do not dare update the BIOS so recklessly. Any ideas?

  Hello

  Thank you for the update on the question and good to hear that your problem is solved and everything works well after the replacement of the motherboard from ASUS. This information will help other members of the community to the same question.

  Feel free to post on the forum if you have any concerns more associated with Windows. We will be happy to help you.

  Kind regards

• When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Color problem

  When I connect my laptop to my TV via the "vga" cable, the color red does not appear on the TV screen.

  Problem with the video card, cable or tv.  I will try to update the video driver first.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• the user does not appear in the login screen (el capitan)

  I see a user in the control panel users & groups of system settings, but it does not appear in the login screen. How can I fix it? I did a reinstall of system and see that the data is always there the prior installation.

  In users and groups > Connection Options, is the verified user list?

  If you have FileVault active it cannot list users until you type the Admin password for decrtpt disk.

• My computer does not load before the login screen, even in safe mode

  I log on to my account (admin) by entering my password.  Then when I click on login I get the 'Welcome' screen and the circle that just guard spinning.  Nothing ever changes.  This happens both in Mode without failure.  I can sign in the guest account, but every time I try to do anything that requires admin login it freezes again.  Help?

  Hello

  in safe mode does not allow you whatever it is read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows Vista does not. on emachine 64bits. the Welcome screen does not

  No problem yesterday, ongoing enforcement don't slow this morning, decided to restart. and the Welcome screen would not fill.  the system repair when it launched, but still nothing...

  No problem yesterday, ongoing enforcement don't slow this morning, decided to restart. and the Welcome screen would not fill.  the system repair when it launched, but still nothing...

  Hey Sparky9404

  You can try a system restore and a layout of a disc repair service

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Walter, the time zone traveller

• My sound icon blackBerry smartphones does not open on the touch screen?

  My sound icon does not open on the touch screen?  All other applications open?  I locked it somehow?  Help, please!  : )

  Begin by a traction battery, if you have not already. With your phone, remove the battery and then replace it.

  I hope that helps you.

• Lost password: I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working

  I recently had to do a restore to factory on my computer dell laptop. It went well until he took me to the login screen and I entered my password is not working. I can't get past this login screen. I have seen a lot of messages that say to insert the disc of vista and re - install. I tried to do, and nothing happened when I put the disc.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner