3.18.6 firmware-> set Just to day for her

Similar Questions

• I need just the driver for Officejet 7210

  I just need the driver for the Officejet 7210 All In One without all the other stuff, can't find it. ANBODY tell me where to find it?

  Thank you

  Hello

  It is an AIO/MFP printer. Its driver should cover... Printing/scanning HP was just one suite for her (some printers have base driver only). You must install all and remove the class that you don't like. If you wish to do this, you can find the driver on the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=391153

  Kind regards.

• Why my windows Movie Maker does not display my digital camera videos when just 3 days ago he did?

  Just 3 days ago my Windows Movie Maker worked and then I downloaded windows movie maker2.6 and it worked always, but I uninstalled version 2.6 and Windows now shows my pictures but not my video just sound and no picture! what the hell is happening? can I re-download the 2.6 movie maker?

  Duplicate the content of the Post-

  After 3 days of movie maker works correctly, now its does not work and all I get is sound and no picture for my videos from my digital camera and beautiful days ago! going on what?

  listen to about 3 days to a week ago my Windows movie maker worked very well, I upgraded my adobe flash player and windows movie maker has always worked correctly and now all of a suddden it does not work and it will only display the image and no video and it's the same thing with the media player, and digital photos from my camera are all ive used , there was never a problem and now all of a sudden thers a problem! is the problem with microsoft, because I know it isn't my camera and not on my computer! I have I have not changed anything ive summer since I started using Windows Movie Maker! my email is * address email is removed from the privacy * if you answered my question. Thanks.i required a response as soon as possible thank you.

  Just 3 days ago my Windows Movie Maker worked and then I downloaded windows movie maker2.6 and it worked always, but I uninstalled version 2.6 and Windows now shows my pictures but not my video just sound and no picture! what the hell is happening? can I re-download the 2.6 movie maker?

  ==================================
  Might be interesting to try to do a restore of the system at a time
  before the installation of 2.6.

  -Features - Windows 7 system restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  If you want a Movie Maker that has a scenario... it
  is a downloadable version of Vista Movie Maker 6:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

• How update just the day of a date value?

  Example:

  Table: FC_GQ_SOURCE_ANALYSIS

  Sample_type = C

  Effective_date = null

  Sample_date = 20/13/07/14 09:00

  Should that happen, it's for any analysis of the sample which has a 'C' sample_type we need for the entry into force the first day of the month for some months of the date of the sample is and keep the time that it is...

  so in the example data, the entry into force should be 2013/07/01 09:00.

  How to update only the part of the day of this string of date?

  Hello

  You don't need to convert it to a string and back to do.  TRUNC allows to get the right day and date arithmetic to get the right time, like this:

  UPDATE fc_gq_source_analysis

  SET effective_date = TRUNC (sample_date, 'MONTH')

  + (sample_date - TRUNC (sample_date))

  WHERE sample_type = 'C '.

  ;

  TRUNC (sample_date, 'MONTH') is midnight the 1st of the month you want.

  sample_date - TRUNC (sample_date) is the time you want, expressed in number of days (for example, 9/24 a day).

• Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

  Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

  The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
  I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
  Sorry for the posting long but no solution would be much appreciated.

  Hi jscher2000,.

  Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

  And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
  Your expertise and your time is much appreciated.

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• Number of days for all the months of the previous 10 years

  Hi guys,.
  I wonder if there is a way to insert in my table of data for the period dimension all
  days for the months of the year 2004,2005,2006,2007, etc..
  Is there somewhere in the Oracle database that stored the number of days for all the months of the years?
  I think I woud have to use a loop of the GET something like the following:
  
  -The year month day
  2004 - 1-1
  2004 1-2
  2004 1-3
  2004 1-4
  2004 1-5
  2004 1-6
  etc.
  Assuming that there are 28 or 29 or 30 or 31 days the lines for January 2004 would be 28,29,30 or 31.
  I need it for all the months and years.
  Thank you
  metalray

  Hello

  The following SQL returns all the days from 01/01/1970 until today:
  + (Just modify the FRST to What You Need).

  with beginat as (
  select trunc(to_date('1970/01/01','yyyy/mm/dd')) frst from dual
  )
  select frst+(level-1) as daydt
  from beginat
  connect by level <= ceil(sysdate-frst);
  

  With a previous alter session set nls_date_format = "dd/mm/yyyy hh24:mi:ss" result would be:

  DAYDT
  -------------------
  01/01/1970 00:00:00
  02/01/1970 00:00:00
  03/01/1970 00:00:00
  04/01/1970 00:00:00
  05/01/1970 00:00:00
  06/01/1970 00:00:00
  (...)
  09/01/2011 00:00:00
  10/01/2011 00:00:00
  11/01/2011 00:00:00
  
  14986 rows selected.
  

  In fact, the real question is: Why do you need them?
  (^_^)

  Published by: Nicosa January 11, 2011 14:25
  (for the correction)

• Cannot set a specific repository for a machine

  I tried many ways to change/set a specific repository for a specific computer and it always goes back to the original.  I removed from the basic machine (saved restore points) and created a new repository. When I added the rear machine automatically resumed inside the restore points, etc. and back have been started.

  I removed again (guarded restore points), pushed the agent to the machine and selected the new repository and he said the agent on this computer is the same as the agent on this computer and reset it with the changes. Rebooted the machine.  However, he still picked up points of restoration on the core and attached to the old repository.

  I tried a total of 5 different ways to get this machine to see a new repository, but no luck.  The only thing I did is remove the machine & points of restoration out of the nucleus and the Constable and I tried.   Archiving is a joke to say the least and takes 20 hours to around 2.2 to has failed or * the rest of the system (as he did last night).

  I used several different backup systems, but AppAssure is by far the worst, slower and less reliable I've seen.  Even my old band system Veritas has been 100% reliable and I spent less time to manage.

  I'm only protect three machines on it so it can't be that difficult.  Any thoughts?

  Thank you. Russ

  Hi Russ,

  AppAssure has a relationship one between the agent and the repository.  You can have data from an agent in a repository at the same time.  Because Wes pointed out you can follow this KB support.software.dell.com/.../117750 . to migrate from the agent and he gave repo from one to the other.

  There is another option to move an agent to a new repository.  You can change the Unique ID of the Agent and then restore it.  By doing this, the kernel will see it as a new agent and allow you to define any repository on your heart, as is the master repository.  If you take this approach, you can keep the old restore points for the agent in the first repository and have all new backups to go to the new repository. Please note that you can never match these two sets of recovery points together once again, because the kernel identifies as a different agent data.  Then they will be displayed always separately.

  To make this change:

  1. Change the display name of the current agent to something different (usually I just add - old for it)
  2. Stop the agent service
  3. On the agent, remove the HKEY_LOCAL_MACHINE\SOFTWARE\AppRecovery\Agent\AgentId registry key
  4. Start the agent service and the registry key and the subkeys will be regenerated
  5. Run the wizard of protection on the basis of protecting agent and be sure to select the right repository
  6. Delete the former agent of protection and keep the recovery points
  7. You have now - former agents like recovery Points only and agent under protection.  A new base image is taken as there is still no data for this agent, but once the base is taken all subsequent backups should be incremental.

  As for your statement about archiving is a joke, I would need to learn more about your configuration to make a statement. What storage do you use for your storage space?  What speed, the size and the number of disks are used?  What RAID configuration? Is it directly attached, NAS or CIFS? Personally, I always found AppAssure as reliable when repository storage is reliable.  Regarding speed, AppAssure runs how fast on your database server resources are capable. I saw TB of data archived in just a few hours.  I've also seen take days.  It depends on the material used.

  Tim

• Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.

  I had a few actual creation difficulty one Hotmail account for my daughter.  I'm using Windows (newer) 8.  I have created an account for it, but can't make it work.  Everytime I try to sign into his Hotmail I get the following error:

  "Hotmail 44 looks like your mother has not finished to set up parental controls for your account settings.  Click "Access the parental control settings" to complete the process and access your account. »

     Needless to say I went to family safety settings on our PC and the Security Web site for the family repeatedly to change the settings that might seem to apply, but it has only settings web for her, no setting of Hotmail to update me at all.  Am I missing something, or is this a problem?

  I've seen one or two similar posts...

  Thank you

  David

  Hi BigDcdn,

  For us, in order to better afin de mieux aider help you with this issue, please send us screenshots of what follows:

  • List of child accounts on https://familysafety.microsoft.com
  • Settings for the computer of the child concerned on the site of the family safety (the page where it shows queries, e-mail notifications, etc.).
  • The list of the user accounts on your computer

  I have sent you a private message for instructions. After you download it, please let know us in this thread.

  Thank you.

  Okay, so I thought about it and it's ugly and not intuitive.

  The REAL CAUSE of the ROOT of this error is that you CANNOT add a new kid in the Family Safety (FSS) Web site.

  But as a solution, you can add a new kid on the Section of the Windows Phone website My family.

  FIRST STEP remove account the offending child of family on the site of the FSS under the management of the list of the members of the family section. Once this has been completed, follow the workaround below.

  WORKAROUND

  1. Then from the sign of site Web of Windows Phone with your Microsoft Account (MSA) (parent).
  2. Hover over your name just below upper right of the search box and you will get a context box.
  3. In the context box, select My Family.
  4. In the Section My family, you will have two lists. PARENTS and CHILDREN, and especially an ADD A KID to the right of the list headers.
  5. Click on the link. Now, you will get a login screen of the MSA.
  6. Register your child or have them enter login and password. They will appear as a kid under the section of your Windows Phone my family. Even if they do not have a phone you can add.
  7. Ask them to connect in hotmail\outlook.com with their MSA will complete the configuration of security for the family.

  REAL SOLUTION

  There must be a link on the site of the FSS for KID A ADD (add a child would be more enjoyable unless of course you are a family of goats) identical to that of the Windows Phone my family section. Seems like a logical place to have this option?

  I hope this helps anyone else having this problem.

• Just installed SP3 for XP - now many of my icons are generic "executable", including MS Apps

  I finally just installed SP3 for XP and will have proplems with my icons.  Many of my shortcuts desctop now have generic icon for an executable file, and I can't get back them to the icon on the right, even using TweakUI.  This includes all applications of MS Office 2007.  Are still not working the icons to launch the application, but I can't retrieve the appropriate icon.

  When I right click an icon of 'good', I get a full menu of options, including those installed with other applications (like adding a archive, WinRAR).  With a "generic" icon, I get only the default list.

  When I choose Properties for a 'good' icon, the target lists the full path to the .exe file and is editable.  I can also click on the three buttons at the bottom.  With a 'generic' in the properties icon, the target is simply the name of the program (Outlook 2007 lists "Microsoft Office Ultimate 2007") and is grey, so I can't change it.  In addition, the "Find target" and "Change icon" buttons are gray.

  Finally, the files associated with these applications have also lost their icons and now show just generic file icons.  However, double click on these files still brings the correct application and the 'Type' is always listed correctly.

  Any ideas on how I could fix this?  Thank you!

  OK, I thought about it... and feel kind of stupid but I did not before.  In any case, I posted the question, so I'll share my answer - the long version.

  During my first install of XP on my machine, I did a 10 GB partition which would be fair for the operating system.  After a few years, it became clear that it was a little too small, this partition began to fill.  When I first tried to go to SP3, I didn't have enough space on this partition to complete it.  then, I moved some files on the main data partition.  One of the folders, I moved a C:\WINDOWS\Installer.  I didn't know that this file was required for some of the icons on my desktop .exe.

  Anyway, I moved everything back to where it belongs, and now everything is back to normal.  Learn something new every day if you're not careful!

• Try to set up remote access for Foscam babyphone. Windows Vista & I have A Westell router. I can't understand this helps :(

  Im trying to set up remote access for a babyphone Foscam (Fl8918W). I worked on it all day.  No matter what I do, I can't get the camera to get on my computer (or iPhone).

  Here's some of what I've done so far...

  -Camera configuration and find the IP address

  -Type the IP address of the camera in the browser and camera open (it uses Active X)

  -Change Port number of the camera (Guide suggested using 2000)

  -Now you can type the IP address and the port number in the browser and access camera

  -Complete the Port forwarding on the router (I did this several times using each option that I could understand. Finally, I think that I did it correctly because it looked like he turned on - but I don't really know.  "I couldn't get any real information on the Port Forwarding for my Westell A90-750045-07).

  -Access using the public IP address.  It did not work at all. I had to find my IP address for my computer/network (which I did) then open my browser and type the IP address followed by: 2000 (new port). The camera was then to open in the browser, but it did not work.

  -IP service.  Management said that the device could be available over the internet using a public IP address. He told me to go on No - IP and sign up for the free service.  After the signing, I was directed to create a host name.  I managed to do it.

  -L' direct access of the ACTIVE camera address No - IP.  I was directed to type my address No - IP (hostname) in my browser, followed by: and the Port number (: 2000). He said that I should then able to access my camera from a computer or mobile app on the Internet using this address.  This does not at all.

  -J' tried to make it work with my iPhone. I was directed to download and install an application called Live Cams Pro - by Eggman Technologies.  He then ordered me to add a camera. I chose the correct model of Foscam, entered the IP address (or my No - IP address) WITHOUT port number, then on another line, I entered the Port number, entered my user name and password and click Save.  Nothing ever came and finally the connection times out.

  I did all the change of option combinations in each stage as many times I could think.  All I could change in these steps, I tried all the options I could.  I can't make it work.

  I'm so frustrated.  I'm not a computer person.  I managed to do a lot of things by reading the instructions carefully.  I read the Foscam Installation Guide and the next babyphones instruction manual (I bought the camera from the company).  Nothing I've tried works.

  Any direction would be greatly appreciated.

  Thank you!

  Did you put the IP cameras as a destination / local IP?
  If this is not the case, do.

  Aside from that, the best would be to contact the manufacturer of your router for assistance with how to correctly forward ports to your camera.

• Prefetch is just a feature for Windows programs, or work for 3rd party too?

  My understanding of Prefetch is that it monitors the use of programs and try to anticipate when they could be used and so loaded them in memory, ready to go.

  It is just a feature for Windows programs, or work for 3rd party too?

  For example, I use OpenOffice and the first time I open it, it takes several seconds to open. If I close and open the program via a session then always opens almost instantly (about two or three seconds) so it must be in RAM somewhere. Yet every day the initial aperture is slow.

  Is - not what Prefetch is supposed to address?

  Hi Mooly,

  You can read the following article and check:

  What is the prefetch folder?

  If you are concerned about the start time, you can consult the following link:

  Optimize Windows Vista for better performance

  Hope this information is useful.

• While turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  About a week ago I just bought windows mobile 8 is installed. Now for the last two days while turning on the laptop its gives me a message "your pc will restart in two days for the installation of updates.

  To stop, I get three option 1) sleep 2) arrested update 3) and close

  What should I do?

  Original title: windows update issue 8.

  Hi Parichay,

  The updates that are being invited to install are automatic updates.

  The message you get is offered by Windows 8 after that updates are downloaded and installed.

  If you do not restart your computer soon, Windows will force a restart of your computer two days after that it has installed new updates to complete their installation.

  You must restart your computer at a convenient time for you, rather than wait two days and have it suddenly reboot maybe at an inopportune time.

  Hope that solves your problem.

• How to set the default size for SWF published in Catalyst CS5.5

  I create a project of 800 * 600 pixels in Catalyst CS5.5 and published it as .swf.

  But when I open the .swf that is published, the default size is less than 800 * 600. I have to resize by myself.

  So is there any method I can set the default size for published .swf?

  Thank you guys! Best regards.

  Nick

  When you start the new Flash Catalyst project, you have the option to enable resizing

  

  This setting is enabled by default.

  If you need to change it later, you can go into edit > settings of the artboard.

  

  Now when you publish your project, the width and height will be there will substitute.

  As to manually file editting the HTML, there are 3 sets of tag that define the width and height of the project (to manage different browsers). You will need to adjust the values of each of these tag sets. You should just have to do if you cannot republish the file.

  Chris

• must restart every day for internet access

  Every day for 4 days, I had to restart my Imac before I can access the internet, download my mail etc.  Once I do all works very well.  I am running OSX Yosemite 10.10.5.  I have my router (ATT) at the top of my list of preferred wifi.  Any suggestions?

  Thanks in advance.

  Try restarting/resetting the router.

  That shows Wireless Diagnostics?

  Wireless diagnosis

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.