must restart every day for internet access

Similar Questions

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• 4th gen all new applications will not content refresh (ABC, CNN, Skynews, etc.) a restart of imports all news news for all applications!  Restart every day!

  All of the new apps will not regenerate content news.  4th gen AppleTV.  A reboot updates/import new news stories.  I am rebooting apple TV every day!  A single application (ABC) has a date in him saying 'news' June 30 even and will not update to July 1 until I start apple TV!  I have sssume, since the problem is with all the applications that it is a matter of Apple TV or a network problem?

  Your Apple TV IS always connected to the network when this happens.

• iPad will not bring the keyboard when I try to complete an external application for internet access

  Hello

  I have a new iPad 2 Air, and very recently he began to refuse to show the keyboard properly, when I am trying to log on to an external internet account. I am traveling and need access to the internet but cannot fill all the required fields, it will bring up the top gray bar with the top and down arrow (they don't do anything, I tried pressing all there) but nothing else, just white space below.

  I have read other blogs and tried to reset the keyboard and things like that but he even let won´t let the keyboard.

  So, I can not get Internet access Login. Please help, I m new to the forum and hope I've filled it out properly... apologies if I've made mistakes here.

  Sorry I haven´t understood my operating system, but when I try to check by going to the software update, it won´t not let me because I Don t have internet.

  I suspect a lot of these errors occurred when I updated to version 9.1 of the software as it is not the only problem I encounter now, however, at this stage, it is the most frustrating.

  Thanks in advance to anyone who can help me.

  Hello Cara, there.

  It looks like that your keyboard is not appearing when it should. I'd leave the applications that are run in which you try to get the keyboard works as well as the application of the parameters:

  Force an app to close the iOS
  https://support.Apple.com/en-us/HT201330

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  http://support.Apple.com/en-us/HT201559

  I think that these apps may simply need to be reset and refreshed. Thank you for using communities of Apple Support, let us know how it goes!

• Why the same numbers are used every day for 4 updates

  Whenever I have shut down my computer, I get a message saying that 4 updates are being installed.  I checked my updates and they are the same 4 updates every day.  What gives?

  Here are a few ideas:

  Audit of the newspaper is not a bad idea. but it is likely that the update log has been accumulated since XP was installed, is probably quite large, overwhelming and intimidating to see.

  I can assure you about that nobody wants to watch a huge log file with a bunch of junk in it.

  You might stop the Automatic Update Service, rename or delete the log and restart the Service to get a new connection, but even when there is 'nothing to do', the journal is full of junk that is difficult to interpret.

  Since updates .NET Framework are connected and these updates are well known for installation problems, an option is to clear the log, just choose an update - say KB982168 and try to install it manually and then you can watch what is happening, and if you have disabled your front update log file It can be easier to spot the problem.

  There is little help that particular article KB, but sometimes the .net Framework updates are particularly bothersome - perhaps other previously botched updates, malware, or other reasons.

  The best thing to do when fail it these sorts of updates of .NET Framework (minimizing the frustration) is often just uninstall all the stuff of the .NET Framework and install everything again from scratch (after checking that there is no malicious software on the system).

  We know absolutely zero about this system because the MS Answers forums does not prompt for any information system when a new question is asked.  Well, we actually know a little bit of things - it's a computer.  Do not know information difficult troubleshooting.

  Hear me, people of MS Answers?

  If you check the links in the article of Microsoft KB for some other updates, like KB979909, you can read that Microsoft has free help and support for these and all security updates - and sometimes, they are actually quite helpful and responsive.

  There are several support options, including a toll free number for especially by using the security updates that fail to install.

• setting up my VM PC for Internet access

  HI -.

  I just downloaded the latest demo version of VMware Fusion, enabled with the serial number temporary supplied and installed XP Professional. The platform is a relatively new Mac Mini running the current operating system. My Internet access is through a DSL modem/router which requires a system of client and enter a serial number from 10 numbers as a key.

  I don't seem to have access to the Internet on my PC of VM. I'm pretty new to do something meaningful on Windows; can someone tell me how to configure it to access the Internet? I just need to be headed in the right direction; I am sure that I have all the configuration information that I need.

  Thank you.

  mzimmers wrote:

  upgrading to SP2, and SP3 instead of directly to SP3.

  I would never install SP2 on a clean install if SP3 was the ultimate goal that it is a waste of time and I will not talk about other things.

  You should look into creating a slipstreamed SP3 for future facilities .iso image.

  Take a look at: Slipstreaming Windows XP with Service Pack 3 (SP3)

  Do you want to get this test anyway? I don't know what he's going to tell us now, because I don't have a virtual machine without Internet access.

  No, it is not necessary since you have Internet connectivity in Windows XP.

• WRT54G Setup for internet access using Lacie Network Space Max

  Help, please!

  I tried for the past 2 weeks, try to configure my WRT54G Router, so it allows me to access the Lacie on the internet without success. I followed all the instructions of Lacie and all other FAQ and help on the internet, still no luck. I spent several days with Lacie tech support and they could not understand it - why my router would allow me access via internet. I hope that the big guns here can help me.

  I have a number of laptops connected to my local network and all wireless laptop can access the NAS Lacie cable to one of the ports on my router. My whole system works wonderful locally.

  The Lacie received a static IP address to 192.168.1.199

  My local network has an IP departure from 192.168.1.150 and ends to 192.168.1.199

  My router IP is 192.168.1.99

  I've assigned port forwarding to my Lacie (192.168.1.199) for ports

  20, 21, 25, 80 and 443.

  I tried other settings but no help. Help, please!

  Happy new year!!!

  Hey Scrooge.

  Thanks for your help... my SIN was in fact all along. I used my cell phone to connect to all this time. Today, I tried my work PC to connect using ftp://x.x.x.x and it is well connected.

  I appreciate your help and your patience.

• My wifi limited shows, no card wireless for internet access or access point problem

  Hi, I tried to connect with wifi, it shows connected but wrote 'limited' by the side. and below his writings no internet no access. I tried troubleshooting but it says wireless access point or no fixed adapter problem. can sum1 if you please help me with this problem

  Hi Dimma,

  What is the brand and model of your computer?

  This could be caused due to various reasons.

  -Due to the wireless router settings.

  -Due to the IP address.

  Follow the following troubleshooting methods:

  Method 1: I suggest you to reset the wireless router and check if this solves the problem manually.

  Consult the router's manual to know how to manually reset the router.

  Method 2: Reset TCP/IP and check if this solves the problem.

  Follow these steps:

  a. press the Windows key (start screen will popup), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the computer.

  
  

  Method 3: If you use WEP encryption change to WPA or WPA 2.

  Hope this helps and let us know if you need help. We will be happy to help you.

• Try a laptop through a desktop computer wireless network. Office uses a USB plug for internet access.

  I would like to access wireless internet on a laptop (XP; Atheros 802. 11 b / g) with a desktop computer (Win64) that currently, I connect to the internet using a broadband USB connect the device (AT & T USB Mercury).  How can I build a local network of the desktop that I'll be able to connect in the House with the laptop?  Are there restrictions and limitations when using this type of internet connectivity vs a wired version?  (Because of where we live there is no availability ADSL or cable, just wireless).

  Hi Mseibolt,

  Thanks for posting. From your post, it seems you are trying to send a signal from your desktop to your laptop using a wireless signal wireless. It is here that I don't see where you have any broadcasting wireless signal from your desktop. If this is the case, then the current senerio would not possible to establish ICS and have it function to your laptop.

  I hope this helps. Please let me know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• password not required for internet access

  Hi all

  We use BBSM 5.3 Server to control our Wi - Fi access point in meeting for comments so that they can access the internet, but in a box, users can access the internet without any password. I don't have an idea on the BBSM server could please guide where should I look to fix the problem.

  Concerning

  Eliane

  Also, here is a link to the 5.3 SP1 guide http://www.cisco.com/en/US/docs/net_mgmt/cisco_building_broadband_service_manager/5.3_service_pack_1/configuration/guide/configsp.html.

  Lee

• RV042 - will require an adjustment for Internet access

  Hello

  My RV042 must be reset whenever I need to have access to the net.  He works for some time and I need to reset it again.  I tried to reset the settings, reinstall the latest firmware (V latest 1.3.19xxx available on the website for my version).

  I tried with another router by removing the RV042 and do not have this problem on my network.  Is this the end?  Anyone who has a suggestion?

  Thank you!

  Been in and out

  Hi Stephen,

  I have to add a few questions:

  1. Have you tested WAN2? If Yes, do you have the same results?
  2. You can test WAN1 by plugging the router replacing the modem plug WAN1 into a replacement router LAN port? (Double-NAT) Ensure that routers have different LAN IPs before doing this.

  Just reply with the results.

• On iPad 3 no wifi connection page don't pop up for internet access

  Since iOS 9.3.4 update for my iPad 3, the login page popup usual to connect to the internet to Starbuck, Panera or in local medical facilities does not come to the top.  No problem with the wifi at home or a facility that does not require you to click "agree."

  Please take a look at problems joining the Wi - Fi networks that require the display of a redirect page in iOS 8.1.2? Check your settings in "AutoConnect". This could be your problem. The update may have changed this logic.

• Why doesn't youtube enhancer work? It was a wonderful app that I used every DAY for my students. It is more downloads, and now I can not find now

  OK for the last two days I've used youtube enhancer his summer bring me to another tab where I can choose how I wanted to download the vid... b4, he did all on the same page... now when he goes to the other page theres no options to choose to click to start the download. IE mp4 etc so I removed and went to reinstall it, but its gone. I can't find it now. I liked this cause you can sift the lighting etc. I use it on my daily life of students so I really want to get that back ASAP. can you please tell me what you're doing to mk it stop working now and why his party? Please email me at xavier6909atyahooodottcom. its very important. Thank you very much for your time. What is the best next youtube soft DL which made the Enhancer there?

  Use this Addons to download Youtube videos
  
  https://addons.Mozilla.org/en-us/Firefox/addon/easy-YouTube-video-downl-10137

• Wuauclt.exe circulates every day for about an hour!

  I have spoken here on the forum of the Performance and maintenance. The problem I have is that the update process wuauclt.exe Windows runs almost 1 hour daily and my system relentlessly during this period and no page faults unresponsive until the end of the update. For example, here is a shot of my WindowsUpdate.log for yesterday:

  http://pastebin.com/embed_iframe.php?i=72Nr9eWk

  I am running Windows XP Professional SP3 and I have Norton anti-virus installed. I suspect that updates triggered by Norton. I've tried to set automatic updates to run 1This just a week, but that did not work. The default on page 1 hour fest happens again.

  Should I remove the C:\WINDOWS\SoftwareDistribution\DataStore directory, and restart?

  Fact. Waiting now to see if it worked.