3F0 Eror. You need to make the recovery CD under Windows 32 or 64-bit

Similar Questions

• Need help aligning the SSD to install Windows XP Pro (32 bit)

  OK, I scoured the internet for help on this one - I'm a newbie to SSD - so having to manually align the partitions and find FITTINGS utilities to take care of the "Crusher" is all new to me - so the answers I found on the net were to "over my head" for my last neuron remaining cope!

  The machine is an Asus Eee PC 901/XP - that belongs to a friend of mine. These netbooks have 1 x 4 GB SSD and 1 x 8 GB SSD - I installed XP Pro SP3 on the 8 GB and got to boot from it - only problem is not only slow, but essentially unusable in this same open my computer with no other progs running takes a good 30-45 seconds - and actually run the progs just cripple it.

  After checking the CPU in Tsk Mgr was sod all, that there is plenty of available RAM (I upgraded to 2 GB = max mobo aura), I can only imagine that - now that I've done some reading on these SSDS - the (main?) cause of the non-existent performance is the fact that I have (in my ignorance) doesn't have to align the partitions before installing the operating system.

  I got a 8 GB disk image - using a prog called 'Snapshot' - as I read it, I should be able to then use this image to replace the disk of 8 once I have the aligned partition (this image is now on the 4 GB drive), without messing up alignment - so no doubt I need to align the 4 GB drive as well.

  So, after all that waffle that I would be really happy is a walk of models by using Diskpar (if someone can point me to a working bind it to d/l 1!) -or Diskpart, which I think I can run from my recovery disc of Win7 (from my Dell laptop) - I know that I've seen people talk about running it from a Vista recovery disk, so guess it of the same tool and can help me to do the same job.

  I think I need to remove the volume (?) on the 8 GB, before I can do any alignment - then, as it is currently the only player with a job o/s on this subject, is it possible by booting from the recovery disc too?

  Just for the record the Tech Support Asus was desperate - also, their support for the "Eee" family forum have been down for weeks - then were not able to ask people who have probably all done on this machine!

  Thank you

  Jon

  Hello

  Unfortunately, this is not supported in computer ASUS; You should continue to contact ASUS for support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• age of empires III download... what I need to make the game load on windows 7

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  It should run with zero problems. You will receive a message saying that it is not compatible, but you can just click Ok and continue with the installation. I installed it on two PCs at home for multiplayer, and it runs great!
  
  --

  Dustin Harper
  E-mail address is removed from the privacy *.
  http://www.mstechpages.com  Microsoft News, support, FAQ, and much more!

  "karl hunsinger" wrote in message News: 44840668-5166-4c4c-9db8-30a714f768af...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dustin Harper * address email is removed from the privacy * http://www.mstechpages.com---aide Windows and Support Page

• In features of style the layer maximum photoshop to 250 pixels. But I need to make the biggest race that I need to make a large logo of a warehouse. Any idea?     Thank you very much for your help!

  In features of style the layer maximum photoshop to 250 pixels. But I need to make the biggest race that I need to make a large logo of a warehouse. Any idea?

  Thank you very much for your help!

  And why you even do it in PS? What you wrote means that you need something big which will be made using cutting of vinyl or other techniques of signage and it requires to work with vectors, which means you use Illustrator, not Photoshop.

  Mylenium

• Make the recovery with USB disks

  I have a HP Pavilion older m9300t Intel Core 2 Quad Q9300 2.50 GHz 4 GB 500 GB. HP told me that they no longer have the recovery discs available.  I bought a refurbished with no disk system.  The hard drive eventually crushed and I decided to keep the computer as it is beyond my needs.  I want to recover my software. I read that you can make the recovery disks with a USB key. It will work in safe mode? And we know if it's a system of 64 or 32-bit?

  If the disk hard th is crushed, then the recovery partition will be unreliable.

  Follow the instructions on the web HP to the address following document to find out how to order a set of recovery disks. Maybe it's a bit difficult because the desktop PC is three generations behind the current operating system.  Is there a certificate of Windows of authenticity with an activatinkey of license of twenty-five characters on the case somewhere?

  http://support.HP.com/us-en/document/bph07143

• You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed

  You need to set the drive letter to the USB Ports front before any device has been inserted - that won't change when the device is connected. I have Windows XP Professional with Visual Studio 6 installed. Thanks for your help

  diana73,

  First of all, make sure that you're connected Administrators account to do.

  How to change a drive letter to change an existing drive letter on a drive, on a partition, or a volume, follow these steps:

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start , click run and type compmgmt.msc .
  3. In the left pane, and then click disk management .
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths .
  5. Click change .
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK .
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite 2435 powers off the power when you try to install the recovery CD of OS

  Happy new year

  Satellite 2435 powers off accidentally when trying to install the operating system from disk with Windows XP Pro startup disk or recovery.

  When starting and working with Winternals AdminPak 5.0, Portable Edition Windows or Dos 6.22 it works stable.
  When booting with the disk recovery he died each time in a different position - when partition formatting, copying the files, etc..

  Hardware problems, isn't? And is it possible to determine and solve the problem at home (because we now hoildays, services does not work)?

  Thank you in advance.

  (Sorry I don't speak English very well)

  When I had my old computer I encountered similar problems in Windows XP and the Windows XP installation. There is a WinXP option to disable the auto-restarting after a problem, instead of restarting, a blue screen stating that the problem appeared. I lived during the installation of WinXP blue screens every time at various times as you and your power off, he appeared on the different WinXP CD (without SP, SP2 with nlite, etc.).

  Maybe your "power off" is hidden blue screen too, but I'm not sure. If this is the case, it may be a hardware problem, so you should test your RAM, your drive hard, etc., for example using memtest for your RAM and the built-in WinXP 'chkdsk '.

  It's probably hardware problems. Were you ever able to correctly use the disk without problem in the past, or is this the first time you try to use the recovery disk?

• I have a partitioned drive and you need to move the updates of the E: drive, how can I do? ___

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I a partitioned drive and you need to move the updates of the E: drive, how can I do?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You do not have.

  The updates will install on the drive where Windows resides.
  TaurArian [MVP] 2005-2010 - Update Services

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• You need to unplug the 10 pro printer when you print not for days or weeks?

  You need to unplug the 10 pro printer when you print not for days or weeks?

  ebiggs1

  Thanks for your reply.

• You need to reinstall the windows XP Backup program that has been deleted by ardja software.

  You need to reinstall the windows XP Backup program that has been deleted by ardja software.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/302894

  It will be useful.

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• you need to remove the license from computer to move to another PC.

  you need to remove the license from computer to move to another PC.

  It is all the information that I have and you can get on the product. I don't know when and who has been sold, or whose key is. Asked me to pass the software of an older laptop to a new laptop.

  Good luck with that.  Without a legitimate serial number, you're stuck.

  Download the Pro or Standard of X, XI or Acrobat DC versions

  Nancy O.

• Why you need to save the images in photomerge panorama?

  Hello.

  I don't understand why with the new version of the Photomerge panorama when I select "create panorama" the program asks me to save the images prior to their merger.

  In addition I don' t understand what foto I must record and in which format?  (all the? in JPG? in PSD?)

  Even after doing this (Save ALL images to merge as a JPG-copy) I can't go forward.

  Thank you to anyone to help me.

  Luigi

  luigig25855901 wrote:

  After my post, I read that you need to open the images, export them (with mutiple of edit function) to a separate folder, and then from the p.panorama with the 'new' images. It worked, but I guess why it can't be fixed by Adobe. It is an unnecessary extra work.

  Luigi

  See this other post.

  Panoramas - Error Message: the Documents must be registered before they can be merged

  The problem only arises with the images in a vertical position.

  It didn't happen with older versions of items, so I don't think that it can not be solved.

  You don't have any extra work if you work from the organizer and you export your files to the correct resolution.