600th BIOS disaster. Is there hope?

Similar Questions

• Is there hope for my 70 d eos I have left in the rain?

  Is there hope for my 70 d eos I have left in the rain?

  jrhoffman75 wrote:

  Salt water damage:

  http://www.FredMiranda.com/forum/topic/1440903

  The good news is that the rain water, isn't salt water and also does not contain a lot of minerals. Indented battery and ensuring the camera is completely dry (don't rush not part) there is a chance he will be ok.

• Dv4-1435dx laptop, Bios flash error (there isn't any rom in this directory file)

  I have a laptop DV4-1435DX with bios F.12. I downloaded the update of the bios ver F66A support page and tried to install just to get the message ' is not any rom in this directory file. I also downloaded the 3 old versions and got the same results, except that one of them was replaced a back box that says does not match the ID of vga. Someone at - he run this and managed to solve the problem? The laptop runs ok on bios F12 with the exception of tell me my new battery is bad, but it checks on an another laptop DV4, and the led on the power adapter plug only come on when the button is pressed, this is not the same as the others I tried, normally the light as soon as you plug in the adapter. Any help would be greatly appreciated.

  The problem with the bios update. I copied the pack of bios f61 on a USB key and installed fine, I won't try the f66, too there horror stories. Thanks again for your help.

• I have upgraded to windows 10, reformatted then and then realized my Tbird profile backup folder has no mail, no book of addresses, etc. is there hope?

  I have recently upgraded to windows 10 and then reformat the computer, by using the backup and restore of Windows 10, programs advance so-called instructions to copy the profile to a USB for Thunderbird folder. Obviously I did something wrong, because there is not much there in the profile... folder no mail, no address book, a bunch of cache.x files that are for most empty and I did not notice that after reformatting. Is there a way to recover my old profile? Otherwise, I have at least one backup of the 2010 profile... (... sniff...)

  You have a Zip program to check the archives? If you need a free, you can try 7 - zip: http://www.7-zip.org/

  If they are not Zip archives, you may hit a Windows 10 forum to get advice on their opening.

• 12 Firefox was a total disaster. There was an error of analysis 527 33 column online and I couldn't do ANYTHING. RELOADED and same error persists.

  Never, I'll upload a new version of Firefox until two or three weeks following its release.

  Please can you have an option to revert to a previous version on your Web site as the download version 12 was a nightmare for me. I lost programs, I lost my nephew (who is in it) and connectivity and I spent 5 hours trying to fix the problems. V12 has been very bug and definitely NOT ready for release.

  I learned an important lesson and it's not immediately download a new version of a software. Wait for the bugs to sort!

  Using an older version of Firefox is not recommended because there are several vulnerabilities that are well known and exploited in the older versions. Only the current version is secure.

  However, you can wait until Firefox 13 comes out on June 5, install this version, and if you are still having problems, try the new Firefox reset feature that corrects several problems in Firefox in a single click. Refresh Firefox – reset the parameters and modules

• Is there hope for my drive hard iMac? EtreCheck below :(

  Yep, the beach ball haunts my computer. Would be updated to El Captain help? "Does that mean?" link says my hard drive is in trouble. Y at - it a hope?

  Thanks in advance
  

  
  

  EtreCheck version: 2.6.6 (226)

  Report generated 01/12/16, 15:04

  Time 21:16

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  iMac (21.5 inch, mid 2011)

  [Click for plug technique]

  [Click here for the User Guide]

  iMac - model: iMac12, 1

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: (Does that mean?)

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac, 1920 x 1080

  Software: (Does that mean?)

  OS X Yosemite 10.10.5 (14F1509) - since the starting time: 9 days

  Disc information: (Does that mean?)

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 998,97 (Go 184,44 free) - 106 errors

  Drive failure!

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 999.35 GB Online

  OPTIARC DVD RW AD - 5690H ()...

  User launch officers: (Does that mean?)

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  [loading] com.avast.home.userinit.plist [click to support]

  [loading] com.avast.secureline.home.userinit.plist [click to support]

  [failure] com.citrixonline.GoToMeeting.G2MUpdate.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]

  [loading] com.shoebox.launched.plist [click to support]

  [loading] com.shoebox.launched.pliste [click to support]

  Apart from your hard drive, you have bad stuff installed: CleanMyMac. You must get rid of it - it cleans so that it deletes the components required by the system. You have also Avast installed - you must uninstall. The rest of the report is missing.

  Now, regarding your hard drive: you can try using disk utility to repair, but it may be on its way. You must ensure that you have a backup NOW that the drive can fail at any time. After that, try to fix it-if it is not repairable, then it must be replaced.

• Hi there, hope someone can help me with an Illustrator logo that I drew.

  Hi all, my logo looks great in Illustrator, but when I place it in Indesign it loses one of the elements...  I have a form with a gradient, there another element shaped inside, as well as two words. One word covers the edges so I used the scissors tool to cut the overlap. This is whenever I place this file, that the Word does not place with her! It drives me crazy. I have it together. If I copy / paste from Illustrator into Indesign, the slope becomes black. Please can someone help and tell me what I can hurt?

  You must select one of the letters in Illustrator with the direct Selection tool and then take a screenshot of the letter, the layers panel open and the appearance Panel.

  Also: it seems that you placed an EPS in InDesign. If Yes: don't. EPS is file format of the last century. It can and it will hurt you.

• Bios A10 not there?

  Not that I need because my MSI 970 works very well and not a single problem, but I just noticed that the A10 to the XPS8700 bios shows no more. A reason for this?

  http://ftp.Dell.com/FOLDER02722955M/1/XPS_8700_BIOS_A10.exe

• After updating the BIOS, there is no sound from my computer.

  I just updated my computer with a new BIOS and there is no sound.

  Very disappointed with HP. I tried a hard reset and it did not work.

  My product is hp pavilion g6

  Product number: QE06UA #ABA
  OS: Windows 7 Home Premium 64-bit

  Hey, Dan:

  I don't have your model of PC, so here's some generic instructions.

  Turn on the PC and at the beginning of the HP welcome screen, press the F10 key to access the BIOS.

  There should be a menu to save the default settings and the outputs, when you go to exit the BIOS.

  That's all there is to it.

  I can't find your model number to give you the link to the audio driver from the support page and pilot.

  If you have the IDT audio chip, here is the latest driver for it.

  Or let me know what model of audio device you have and I'll see what I can find if not the audio IDT.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102404-1&CC=US&DLC=en&LC=en&os=4063&Product=5182504&sw_lang=

  Paul

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631

• HP Pavilion BIOS update

  I bought this laptop in December with 10 Windows installed. A few weeks ago I started to receive a notification in Support Assistant update THE system BIOS.  No matter how many times I run the update of the notice persists and never recorded Action log this update took place.

  After having checked with this Forum, it seems that other users have had problems with the updates to the BIOS and HP Support implemented warned against updating the system BIOS, unless there is a compelling reason to do so.

  1. because I am not having any issue that could force such update, should I simply reject the notification?

  2. If such an update is not advisable, why Wizard displays its notification?

  3 dismissing the notification would make this sensitive laptop security vulnerabilities?

  4. the instructions on the site of HP update BIOS theSystem are considerably more complex than the procedure launched from support Assistant. Exactly what is it?  The update to Wizard help Softpac number SP76353, Version F.19Ap1, size 8,89 MB.

  Hi @LAB7,

  Thanks for posting HP forums!

  I read your post and wanted to help.

  I understand that you have questions about the update of the BIOS. I agree that if there is no problem with the current system running, it is not necessary to update the BIOS. However, HP support assistant will fill the notification as soon as there is a newer version of the BIOS. You can reject the message and it won't cause security problems.

  There is another way to update the BIOS, by downloading it from the HP support page. You can put the number of your product here on this link: http://support.hp.com/us-en/drivers. Choose the right operating system on the page, it will show the drivers to your model, including the BIOS update.

  Hope that these could help. Let me know if you need more assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Pavilion p6-2201el: the BIOS recovery

  My PC after the upgrade to Windows 10 unbootable. No MESSAGE, no noise, no led on the front panel. Power supply is ok. Think I should do a being of the jumper on the motherboard BIOS recovery. I may have the exact procedure? Thank you ad is lying.

  Hi there @MarcoFast
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking for help that your system does not start successfully after the upgrade to Windows 10. I'm happy to help you.

  I realize that you may have about the reset of the BIOS, but I think you should try to work first of all through the process on this page. HP - computer desktop PC won't start not (Windows 10.8)

  Then if you still have questions, I would recommend you restore your previous operating system, a feature that allows 10 Windows when you install an upgrade; You can restore 29 days.

  Restoration of Windows 10 in your previous version of Windows - www.thewindowsclub.com

  I wouldn't do anything with the BIOS until you are in your previous operating system, assuming that this is necessary at all.  Here is the rollback of the desktop computer BIOS method: PC desktop HP - BIOS recovery

  I hope this helps.

• How to change the settings of the BIOS on Satellite L30-134?

  I have a toshiba l30-134 and I can not for love nor money to update or to unlock my BIOS. Yes before you repeat the usual speal on laptops is limited. I know they are!
  BUT... the BIOS on my laptop is, at the end of the day an interchangeable accordingly with appropriate tools and integrated program.

  It is well known that large computer makers lock end-users to access these options to stop their valuation there own bought and paid for PC, so that they can not go out and buy a cheaper machine, and improve it. It is also a common misconception that laptops are not expandable. That's what they want you to hear. It is not true. OK, so you can't plug loads of PCI cards or graphics in it, which would defeat the object anyway.

  Extensible components in a laptop ARE IN FACT evolving for example, memory and HARD drive.
  There are several options that I would see in my BIOS, I know they are there, and I know that they have been hidden.

  Why, oh why can't get rights to access these options? After all, he has bought and paid for, and if I want to tinker with it why I shouldn't. She belongs to me now.

  I have a few tools that will change these settings in the BIOS, Phoenix BIOS editor and WinPhlash, but again, I have not found a downloadable BIOS for my machine. But believe me when I do I will be changing the options in the BIOS. And I hope I'll be able to put together one guide for others who also believe that they can change it machines anyway they see fit.

  Watch this space!

  You can have a BIOS custom-made on your laptop, but not through an official site like Toshiba.
  I do not understand what options you believe was hidden from the normal user like you and me.
  In addition, I doubt that you can improve the performance of your laptop by changing the Firmware into something else.

  Once a stable Firmware is made to a system, it is preserved and everyone (manufacturer and user) are happy
  with the result.

  Concerning

  chain

• Corrupt BIOS on Tecra 8000

  I have a Tecra 8000 flea market some time ago and Mepis Linux is installed. Everything worked fine until I gave it to my sister who spilled a cup of tea top.

  Allowed us to dry out, but now, although it seems to be 'living' I get the message "ready for the update of the BIOS. Please place BIOS update diskette in the drive snd press a key when you are ready to move forward. "when I turn on the monitor.

  I hope that this suggests I can restart the machine, if I install a new BIOS.
  However, there is no floppy drive on this computer in which you insert a floppy disk!

  I tried to download a BIOS upgrade and save it on a CD, but it is not recognized, probably because there is not BIOS.

  Does anyone have suggestions as to how I could try to get the machine working again?

  There is a floppy driver for Tecra 8000 with a special connector.
  You need a floppy drive!
  Check on ebay for it or try to contact your local Toshiba service. They may have this player.

• Equium L40: After bad Bios update cannot use the WLan

  Hi there hope someone can help.

  I've updated the Bios as tempo toshiba said, but I have not read the last piece. Who was that it is not for mine which is the model L40.

  I have now tried to put the right pair, but he says he can't. As I'm putting that has an earlier date.

  My main problem now is that my wireless stopped working, it says its there and so to work, I put the switch on, but he can't find any networks he used to find approximately 4 in my area

  Do I have to restore my entire system :(?

  I'm really confused about your message because the European Toshiba page provides drivers and BIOS for one Equium L40 series m.
  I found 2 different versions of the BIOS for Equium L40; a BIOS for XP and a BIOS for Vista.

  In my opinion it of almost not possible to update the BIOS with the wrong version

  However, it you have updated and used the wrong BIOS, then you must contact the ASP to help

  But first, I recommend a check of the WLan configuration