7 backup fails and gives an error Ox81000037 (only 1 error message)
I followed the remedy given in the answer to the problem ""7 backup fails and gives error Ox8007045D + Ox81000037 "without success." That is to say, I disabled the protection for all readers, created a new restore point and then reactivated the drive. I checked that the drive I save uses the NTFS file system, and then run back to the top again. I always get the message that the backup failed and the Ox81000037 error code.
Help with this problem would be greatly appreciated.
I had a similar problem also (Win 7 Pro) on the new installation. But be careful with the installation of utilities backup/restore 3rd party as some suggest below.
As others have said that your problem is probably due to the VSS (Volume Shadow Service) feature be corrupted. I had MSE too but turn it off made no difference.
In my case, it was because of software that included drivers for my motherboard. There is a backup/restore utility which took control of the "false" Windows Restore and VSS feature & backup of MS of the system.
Go to the system event log and sort through VSS. Then search for errors on the VSS or the backup. Is particularly important to look at the "Information" events that led to the error. They are more revealing than the error itself real. The error is misleading for me. In any case, look in the Inbox details information for the process that was involved. My bet is that you need a 3rd part/application that needs to be removed.
I have fought with this problem for weeks and stumbled on the errant software. I did not intentionally install it. So look for software that could have been bundled with other applications or drivers.
Good luck
John
Tags: Windows
Similar Questions
-
Original title: blackberry 9300 curve
BlackBerry curve 9300 old meeting calendar which has been removed again try to sync and gives an error message
Hello
(1) did you remove the meeting in the calendar on the computer as well?
(2) what is you get the exact error message?
I suggest you to contact the Support of Blackberry to get better assistance.
Here is the link: http://us.blackberry.com/support.html?lid=us:bb:support & Cal = us: bb:support
-
My OS is Windows XP service pack 3 version. I even tried to install FF4 but he never settle. As I mentioned my FF continues to try to update, but it gives the error message that I set out in the title. Now I don't have access to my FF browser and my life stopped because I have all my saved passwords on FF. I restarted my laptop but it stills try to update himself giving the same error message. I can not also improved my Adobe reader 7.0.7-10 I tried more than 10 times, but it is never up to date. I had this problem Adobe for a long time.
Run the program Firefox once as an administrator (right click: run as administrator).
If this does not help, then do a clean reinstall.Do a clean install (re)-:
- Download a new copy of Firefox and save the file to the desktop.
- http://www.Mozilla.com/Firefox/all.html
- Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
- Do not erase personal data if you uninstall the current version.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
Running Windows 7 on one partition and Windows 8 Preview of consumption on the other, Firefox does not open for either.
Firefox crashes when opening without error message. I reinstalled and deleted manually the profile information. If I create a new profile, it works up until I got close and try to restart I have to make a new profile.
I tried removing/reinstalling java as well (in case), which I had been to some of the java edition of my Windows 7 partition installation.As I run Firefox, if I look at the Task Manager, Firefox.exe appears for a moment, but disappears almost immediately.
No files appear in the directory "C:\Users\[Username]\AppData\Roaming\Mozilla\Firefox\Crash reports" with the exception of the file "InstallTime."- The information posted in the "Troubleshooting information" section below comes from the partition of Windows 8 Preview of consumer. There are errors with my display not updated correctly, driver - Firefox was working on Windows 8 Preview of consumption until recently, so I guess that it is not part of the question.
Why not instead to downgrade a Firefox exist for earlier versions, consider trying several installs.
Portable Firefox is designed as an easy to install using Firefox as a browser extra process.
- He's probably still available in versions http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released
Familiar with your facility manually several versions of Firefox will be easier, simply use separate unique profiles for each version. Use the built in the Profile Manager or the standalone version to help you. These tests do not require all other partitions and must do not include changes to the firefox installs and existing profiles.
-
Close this error message, it will open in any case. Never get time to start. I am running XP. I tried to uninstall Office 2003 and reinstalled. The same problem. Help, please.
Hi Fishbreath,
a. you did the changes to your computer recently?
b. Since when are you facing this problem?I suggest to perform the clean boot on your computer and check.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
To perform a clean boot on a computer, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
Hope this information is useful.Umesh P - Microsoft Support
-
Two weeks ago I have upgraded to Adobe Acrobat Pro since Acrobat Pro XI DC. Create a PDF from Clipboard in appearance from a status bar results, lessons for 25%, at which point Acrobat "freezes" "." " Similarly, when using the feature to create a file PDF in Microsoft Word 2016, a progress bar appears, gets to 25%, then the error message "Microsoft Word has stopped working", restart Word, and a message recommending that the Acrobat Add-in is disabled. I'm on Windows x 64 on a Lenovo X 1 carbon 10. Is there a "fix" to these questions?
The word problem seems more likely to have a bug introduced by Microsoft in their last update for Word 2016, a couple of weeks. Someone posted a way to get Word to revert to a version:
To revert to a version earlier office 2013 or 2016 Office in the form of installation of Office 365, you must use a command line and specify the build number, that you want to return.
- As Office 365 facilities are automatically updated in the background, you must disable the automatic updates first. This can be done in any application Office 365 via:
File-> Office account-> Update Options-> disable updates - Open a command prompt:
- Start-> type:
cmd
- Click on: command prompt
- Choose: Run as administrator
- Provide your credentials to the administrator or to confirm the user account control dialog box when you are prompted.
- Start-> type:
- Type the command below that applies to your version of Office or Windows
- Office 2016
cd %programfiles%\Common Files\Microsoft Shared\ClickToRun\
- 2013 office under Windows 32-bit
cd %programfiles%\Microsoft Office 15\ClientX86\
- 2013 desktop on 64-bit Windows
cd %programfiles%\Microsoft Office 15\ClientX64\
- Office 2016
- You can specify the number of bed to regain in the following way:
officec2rclient.exe /update user updatetoversion=
- Replace
with the build number that you want to return. There is a preview of version numbers, you can return to the Office 2013 and 2016 Office. - Example to return to the release of January 2016 office:
OfficeC2RClient.exe /update user updatetoversion=16.0.6366.2062
- Example to return to the release of January 2013 office:
OfficeC2RClient.exe /update user updatetoversion=15.0.4787.1002
- Replace
- As Office 365 facilities are automatically updated in the background, you must disable the automatic updates first. This can be done in any application Office 365 via:
-
I am running with "Backup and Restore" backups in Windows 7 Professional and constantly get this error in the logs:
Backup has encountered a problem during the practical C:\Users\Tim\Documents\Blender file backup. Error: (the system cannot find the specified file. (0 x 80070002))
"Practical Blender" is a folder I previously removed documents and backup should not be looking for it. I tried to remove the job from the scheduled backup with Windows Task Scheduler and create and execute a new backup job, but the problem goes away. It is only this specific file gives me this problem. I deleted the other folders of Documents before and since it was started without any problem of backup.Is it possible that I can stop backup to find this file that does not exist?
What happens when you recreate this folder?
-
This is the message I get when I search for images: your search could not be performed with the requested search options. This is regardless of what I'm looking for.
This problem may be caused by corrupted cookies.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
-
Skype crashes and gives an error when you try to call.
original title: Skype force closure
When I sign in to Skype and call someone force close program and gives an error message?
Please help, need to Skype!
Hello
1. What is the exact error message that you receive when you use Skype to call?
2 have you made any changes to the computer before the show?
Method 1: Start your computer in a clean boot, and then try to use the Skype program to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link below.
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Method 2: If the problem persists then, uninstall and reinstall the Skype program and check if that helps. See the following link for uninstall Skype in the programs and features.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Uninstall Skype try to download and install the latest version of Skype for Windows 7 operating system from the following link and check if that helps.
http://www.Skype.com/intl/en-us/get-Skype/on-your-computer/Windows/post-download/
If the problem persists then, I suggest you to ask your question on the forums of Skype.
-
Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code 50.
Hi Gregory,
Please refer to the threads below to resolve the error code 50:
Which is updated CC 50 error Code?
Setup error - code error 50 creative cloud.
You can also try to download the app from the link below:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
* Be sure to read the important Instructions before downloading *.
Kind regards
Sheena
-
Backup fails with Invalid RECID error
Hi all
Please help me understand the guard-section layout
below the text is
[http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
Caution:Backup Fails with Invalid RECID Error: Solution 2 This solution is more difficult than solution 1: To create the control file with SQL*Plus: 1. Connect to the target database with SQL*Plus. For example, enter: % sqlplus 'SYS/oracle@trgt AS SYSDBA' 2. Mount the database if it is not already mounted: SQL> ALTER DATABASE MOUNT; 3. Back up the control file to a trace file: SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE; 4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following: # The following commands will create a new control file and use it # to open the database. # Data used by the recovery manager will be lost. Additional logs may # be required for media recovery of offline data files. Use this # only if the current version of all online logs are available. STARTUP NOMOUNT CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS ARCHIVELOG -- STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED MAXLOGFILES 32 MAXLOGMEMBERS 2 MAXDATAFILES 32 MAXINSTANCES 1 MAXLOGHISTORY 226 LOGFILE GROUP 1 '/oracle/oradata/trgt/redo01.log' SIZE 25M, GROUP 2 '/oracle/oradata/trgt/redo02.log' SIZE 25M, GROUP 3 '/oracle/oradata/trgt/redo03.log' SIZE 500K -- STANDBY LOGFILE DATAFILE '/oracle/oradata/trgt/system01.dbf', '/oracle/oradata/trgt/undotbs01.dbf', '/oracle/oradata/trgt/cwmlite01.dbf', '/oracle/oradata/trgt/drsys01.dbf', '/oracle/oradata/trgt/example01.dbf', '/oracle/oradata/trgt/indx01.dbf', '/oracle/oradata/trgt/tools01.dbf', '/oracle/oradata/trgt/users01.dbf' CHARACTER SET WE8DEC ; # Take files offline to match current control file. ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE; ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE; # Configure RMAN configuration record 1 VARIABLE RECNO NUMBER; EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK DEBUG 255'); # Recovery is required if any of the datafiles are restored backups, # or if the last shutdown was not normal or immediate. RECOVER DATABASE # All logs need archiving and a log switch is needed. ALTER SYSTEM ARCHIVE LOG ALL; # Database can now be opened normally. ALTER DATABASE OPEN; # Commands to add tempfiles to temporary tablespaces. # Online tempfiles have complete space information. # Other tempfiles may require adjustment. ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE; # End of tempfile additions. 5. Shut down the database: SHUTDOWN IMMEDIATE 6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database: STARTUP NOMOUNT CREATE CONTROLFILE ...; EXECUTE ...; RECOVER DATABASE ALTER SYSTEM ARCHIVE LOG CURRENT; ALTER DATABASE OPEN ...;
If you do not open with the RESETLOGS option, then two copies of an archived redo log for a given log sequence number may exist--even though these two copies have completely different contents. For example, one log may have been created on the original host and the other on the new host. If you accidentally confuse the logs during a media recovery, then the database will be corrupted but Oracle and RMAN cannot detect the problem.
How to open the database without resetlogs?
This will not help you. You must open the database in resetlogs mode in order to avoid such a scenario. You can open the database in mode restelogs by type
SQL > alter database open restelogs;
Instead, he will lose the present trancation in logs online.Rgds.
-
I can't sign on my icloud account, saying: "check failed and an unknown error has occurred."
Hello buchionunwor,
Thank you for using communities of Apple Support.
I see that you are having problems connecting to your iCloud account. The following article provides basic troubleshooting for problems with your iCloud account.
iCloud: Troubleshooting account
Best regards.
-
Need to install KB947821 update but fails and displays the error 9370001 code
You will need to install KB947821 update but fails and displays the error code 9370001. Does anyone have a solution?
CrystalBall © SEZ...
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I have recently, I lost all of my info by e-mail and went to try to recover from a backup. discovery of my backup has stop working and displays this error message: "failure irremediable 0x8000fff. Doesn't sound good! What happened and how can I solve this problem?
Hello
Method 1:
You can follow the steps provided and check.Check the VSS service. Follow these steps:
a. Click Start and type services.msc in the search box.
b. Locate the VSS service and make sure that the startup type is automatic.
i. right click on the service
II. If the service is stopped, then start the service
III. Select Properties
IV. and in startup type, select automatic.
c. click Ok.
Method 2:
You can also perform a clean boot and check:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
Method 3:
I also suggest to run the disk clean tool and check if it helps.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
-
some of my updates fail and it says: error 80070005
some of my updates fail and it say error #8007005 how to fix this?
Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates)
Please check that you are logged into an account with administrative privileges.
So what updates fail?
What security software do you use?
Have you tried to install the updates in a clean boot state?
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
Maybe you are looking for
-
It apparently just started to be a problem today.
-
WLAN on my Satellite L450D disorders
(Wireless) Internet is down on my Toshiba, even if the connection is good and works on other computers. Other connections (my dongle) are also not working.Troubleshooting reveals "windows cannot find"% windir%\System32\rundll32.exe"System Restore doe
-
Can I put the sidebar DO NOT open in each window of your browser?
The sidebar is a huge waste of real estate on my 13 "screen, not to mention a foreign function that I didn't simply need to see. Is there a setting in prefs or somewhere else where I can disable this feature? Or Apple decides that he needs their own
-
There is a problem with this site's secure certificate prevents me from open sites
There is a problem with this Web site's secure certificate. appears when I try to open sites. How can I fix it?
-
I can't remove the port that my printer is listed on stop, file print
I can't remove the port that my printer is listed when I get the message "print to file" requiring an output file Name.The message when I try to uncheck it's that the requested resource is in use. How can I proceed?