800 Mini G2 EliteDesk: Dual 4K displays with EliteDesk 800 Mini G2?
I have an EliteDesk 800 Mini G2 with the i5 - 6500T CPU and integrated graphics card Intel 530. There are also two DisplayPort connectors. As the title says, I tried to find out if the device supports two monitors 4K 3840 x 2160 @ 60 MHz. The specs seem to suggest that it would work. I'm confirming without having 2 K 4 monitors on site. Anyone know or have experience with a configuration like that?
The i5 - 6500t supports up to 3 screens to 4096 x 2304 @60 Hz
http://Ark.Intel.com/products/88183/Intel-Core-i5-6500T-processor-6M-cache-up-to-3_10-GHz
Implementation of multiple 4K displays with your EliteDesk 800 Mini G2 will work. Your EliteDesk Mini supports up to three displays to the right of the box. I suggest using the displayport output ports.
http://www.Intel.com/content/www/us/en/support/graphics-drivers/000005580.html
Tags: HP Desktops
Similar Questions
-
Where can I learn the ability to use the external displays with my X 301?
I've never had a problem when connecting to any projector, but when I plug in an external display on the VGA port, I can't increase the resolution to take advantage of the larger screen. My goal is to use a large external screen or two external displays of average size for a work of GIS in my office; the laptop is powerful enough for GIS, but the small screen is a handicap.
(running Windows 7 and ArcGIS 10)
independent mode is just a windows setting, where the two LCD displays two independent images.
The image describes the various video connectors that meet you (your laptop don't have vga and displayport connector).
In order to help you more, you tell me the model type of the screens that you use.
-
rMbp mid-2014, external display with the quality of the retina
Hello!
I buy a Dell 24 "external display to connect to my rMBP with QHD (2 560 x 1 440) resolution.
I have connected the screen to my mbp with the mini display / port cable supplied with the display screen. It works well, but I don't have quality of retina at all (the images seems good but the text is terrible)
The text have a bad record as a retina screen, and it makes a big difference when I spend my retina display to the external display which is not comfortable at all.
I though that this kind of screen was OK to view the retina... but I was wrong. I try to connect with minidisplay / display and HDMI! HDMI made was worse than minidisplay. The res in the system report show was good 2 560 x 1 440. I even try the hack to force with the patch, but always bad RGB render text...
More important, I want to, it's having the same record as retina on the text and images. What external display can be good for this?
My budget is 450-€500
Thank you
The size in pixels of the screen is not mean much: a small display to 2560 x 1440 pixels seems much sharper than a widescreen 2560 x 1440 pixels.
Your retina Macbook has something like 220 dpi (DPI in English), the Dell screen only 117. If you want the same sharpness, you will need to choose a display with 220 dpi. But then, everything on the screen will look much smaller. Here is a tool that allows you to get the idea: http://dpi.lv/
-
Dual independent display of Windows 7
I'm having a problem with taking dual independent display. Application on the 2nd screen windows move to different positions or places if the program on the 1st screen change resolution on the 1st screen. Is it possible that I can do the monitors view side by side independently?
Windows 7 ProfessionalIntel DF77DF motherboardIntel i5 - 3570 K CPUAMD, Radeon HD77xx PCIe - 1 display adapterIntel graphics HD 4000 - 2 display adapterHello
I apologize for the late response.
I understand that the above steps force help. So, please follow the links below to solve the problem.Using multiple monitors as independent displays
http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd145179 (v = vs. 85) .aspxMultiple display monitors
http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd145071 (v = vs. 85) .aspx
I hope this helps.
Thank you -
Only the Inbox displayed, with no menu for other areas such as "sent".
Only INBOX menu, displayed with no menu for SENT, DRAFTS etc. on the left flank and with the FILE EDIT etc missing high.
Hope you can help.
All the best,
Stan
Features universal key to display the hidden menus bars is alt or F10. After that the display of the menu bar select View-Toolbars and rekindle the missing toolbars.
Then in the menu bar select View-presentation-folder pane to rekindle that.
-
Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works
Hello
Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.
-
Apple Cinema Display with old Mac
Hello! I was wondering, I have an apple Cinema Display with the famous ADC video plug. I also have a couple of old Mac without a monitor, for example a performa 6360 Powermac 6100 and Macintosh iicx and Iisi. Y at - it a video adapter to use the movie with these old Mac screen? is this possible?
Thanks in advance!
The main obstacle is that a screen ADC must get its power through an ADC port on the computer. The old Mac you list can only the power of their old school connectors.
I remember this adapter:
be needed to power a monitor ADC to an ADC not Mac, but I would feel much better if another old graybeard archived to check my aging memory. You still need an adapter to convert the DVI on the adapter port 15 pin Apple old Mac. Some 6100 s required a special just HDI15-to-DB15 adapter to use a normal Apple display that would have been contemporary the 6100:
-
Cannot update the display with v.156.16 on the Satellite A100-599 Vista nVidia Driver
I have Windows Vista Ultimate Edition in Satellite A 100-599. Update NVidia display with 156.16 version driver is not possible. A fact Vista Ultimate 32
bit.
Any solution to this problem?
Thank you.
Hello Kerim
Can you please tell me what happening exactly when you try to install NVIDIA Driver 7.15.11.56.16 version. ?
Do you have problems with the display only driver?
-
Overload CPU display with waveform graph
My sample code (yahoo.vi) presents the 2D DBL in size of 30, 000 * 2 table.
Whenever the 2D table was displayed with waveform graph, I found there were big delay (around seconds) by CPU overhead but the time was very short.
Once this has happened, the computer (8108 PXI double heart, 4G of memory, 32-bit win7) has been slow to exploit something.
Is it bug or problem comes from the computer? or do you have a solution?
labmaster
My version of LV is 2009.1 (service pack installed)
You need to transpose the table! (or right click on the chart... convert table)
You are graphing 30000 plots with two points each (hard!) instead of 2 plots with 30000 points each (easy!).
(Imagine you would display the legend of the plot with 30000 plots, it would be a mile high!)
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
Original title: group Windows Explorer by name
Using Vista Home Premium 64 x. In Windows Explorer how to group by name to display with the simple letters like A, B, C, D, etc. instead of A - H, P, Q - Z? In XP, it could be sorted by simple letter, which makes it easier in a folder with many files. Thanks in advance.
Hi kmcmi,
Welcome to Microsoft Answers Forums.
Well this feature is not available in Windows Vista.
It only works on Windows XP.
I've added a useful link
Behavior and change folder views
http://windowshelp.Microsoft.com/Windows/en-us/help/3a3bfe59-5268-4FB3-81c5-7972c28939cd1033.mspx
Hope this information is useful.
Let me know if it worked.
All the best!
Thanks and greetings
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?
InDesign has no control on how Apple Mail displays a PDF it creates.
My experience is that Mail displays a preview of a single PDF page, but not a multiple page PDF. In addition, for a single page PDF, the user may tip if the PDF shows a preview by right-clicking the icon/preview.
-
A form of the APEX, the elements of the numbers go right margin. If you change these elements to "view only", the margin moves to the left. How can I set numbers to display with a right margin?
You must use the attribute of the element of the element. Change the Horizontal/Vertical alignment to right.
-
Forms is displayed with the color when a form is called from a menu
Hi all
I've recently migrated all forms and menus of 6i to 10g As. Now, I have a menu with some menu items, and a special menu item called a form of it, and the called form has buttons which calls another form of it even.
The problem is, when I call the shape of the menu item, the form is displayed with a color. I mean the text Element and push button are colorful. And of the shape called if I press a button that calls back a form, or even the 2nd form called appears the color. (Same color appears in all forms).
But the Forms seem to be color when the form is called directly ( not through any form or Menu ) just passing form name in the URL.
Also checked the property Palette and doesn't seem that any color specified anywhere.
What could be the problem?
And what all (in the property Palette) should I need to check this?
Published by: Charlie on April 13, 2011 10:31and what color is? If it is gray, it sets with the gray of co.or?
-
Connection of Mac mini at an Apple display with ADC connection
I half 2011 Mac mini and an Apple display that uses the old ADC 30 pin connector (3 x 10). Is it possible to connect them with an adapter? If Yes, what type of adapter and where I find it?
You need to match ADC to DVI and DVI / Mini DisplayPort.
(140884)
Maybe you are looking for
-
OfficeJet 5740: How to use ePrint
I just bought an OfficeJet 5740. I just got an email from HP with my e-mail address of the printer. I have an iPhone 5 s. I have no idea as to what to do with the printer email address or what it does. Any help would be appreciated. Thanks in adv
-
Motorolla dear users,. I bought my Milestone just days ago and have already begun to receive notifications that fills my phone memory. After doing some research on the internet, I. ve found that most of the users have this problem because the apps do
-
I have two updates that fail to install, get the error code 643, how to solve this, thanks
-
How can I remove Windows Antivirus 2010 if I can't access the internet?
I have the Windows Antivirus virus on my computer and I looked at how to remove it, but all these need to go on the internet and its blockage of the internet. Someone at - it solutions?
-
Switch from Windows 7 to Windows 10
I have an old PC that I bought from a friend I want to spend 7 to 10. When I start the upgrade process, he asks me a product key, I did not. Is there a work around you know so I can move forward? Thank you.