A C4680 can be installed on Apple Airport?

Hello

I just bought a Photosmart C4680 and I am looking to set up on my apple airport so I can print wireless.  Is this possible?

I have tried and so far have had no joy

Any help is greatly appreciated

Details;

O / s: Vista 32 bit

See you soon

Matt

You could allow Hello through the firewall AVG, or just use the WIndows firewall, or as long as you are at home behind your hardware router firewall, disable the software firewall on your PC.

Tags: HP Printers

Similar Questions

  • Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

    Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

    Two possibilities:

    (1) your airport WiFi might have a network name that is not in line with best practices, wireless

    A good wireless network name is...

    ... In short no more than 20 characters

    Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

    Compact, without spaces in the name

    For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

    Same guidelines your password

    (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

  • I have a plug in the DVD burner to add my drive Adobe Acrobat on my Macbook air, however, it says that I can not install as Apple does not support Microsoft programs, any help?

    My disc will not install adobe on my air as they say apple do not support microdots?

    You can use Acrobat, if you get the Mac version (or a subscription, which is independent of the platform).

  • Can iTunes be listened to using non-Apple (Airport Express/Extreme example) devices?

    Hi guys, my first question to the forum and hope you can offer some advice.

    One of my friends would like to extend his network wi - fi wireless and listen to their iTunes library throughout the House. It has a large router broadband modem/hub and BT Infinity2. I was going to suggest linking an Airport Express and Airport Extreme solution to install broadband from BT, but in the case where it is costly to use non-Apple devices to stream music from iTunes?

    Any help greatly received.

    All my best

    Wuidar

    can I use non-Apple devices to stream music from iTunes?

    Much would depend on what device you want to listen to music to. Is - this AirPlay device is capable?

  • My app tube you went on apple tv, how can I install it again

    the YouTube app on apple tv disappeared. How can I install it again?

    What version of Apple TV? I have a feeling that the application has been removed from Apple TV 1 and 2 last may, that this version was more compatible with the YouTube website. As I understand it there is no intend to replace. See http://www.macrumors.com/2015/04/20/youtube-older-apple-tv-discontinued/

    TT2

  • I can't install the cradle mobile apple HELP!

    I spent hours trying to get iTunes working.  All I want is to be able to connect my iphone running iOS + 6 9.0.  Everything works fine except that iTunes will not work with my phone.  Each part of iTunes (Application Support (32 bit), Application Support (64-bit), Hello, software update) installed except Apple Mobile Device Support.  I'm out of ideas.

    Data sheet:

    Alienware laptop computer running windows 7

    iPhone 6s +.

    iOS 9.0

    enough disk space

    64-bit operating system

    I tried to uninstall all components of itunes in the right order and reinstall, but it installs without support for mobile devices from apple.  If I try to manually install the amendments with the msi file, I get the

    "Apple Mobile Device Support has not been installed on your computer.

    Setup errors occurred before Apple Mobile Device Support could be configured.

    Your system has not changed. To retry these operations at a later time, please run Setup again. »

    I tried to locate every possible linked apple folder and remove them completely and reinstall with the itunes6464setup file.  No matter what I do, the amendments will not be installed.  It's so frustrating.  I also used a program called Windows Installer Clean Up to remove all traces of itunes and everything.  I also tried to uninstall with uninstall a program and IOBit uninstaller.

    Hmm, you might see a free version of the error of this issue:

    The message "an error occurred during the installation of assembly 'Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitrcture is"amd64"'" may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason.»» Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

    TT2

  • Can I install windows on Apple G4 power book

    Can I install windows (any version) on Apple G4 Power Book.

    Hi Sam,

    According to the information I can gather, it is not possible unless it uses the Intel processor.

    I suggest you contact Apple for more on this one.

    Apple - Support - PowerBook

  • Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

    Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

    Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

  • How can I install photoshop CS5 update my parallel software Apple computer?

    I can't install photoshop CS5 extended (updated with the serial numbers of CS2 and CS4 and CS5) CS5 extended I buy with CD. Actuelly, I work with Windows 8.1 on my Apple computer with parallel. Can you help me?

    You can also upgrade to CS6 then ask a swap of platform, I mean I knew. The Plan of the CC photography isn't bad either...

  • I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my serial No.

    I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much

    Download through the page linked below and use the serial number, you need to activate it.

    CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Can I install old Mac on the new iMac CS6 using apple migration Assistant

    Can I install old Mac on the new iMac CS6 using apple migration Assistant?

    You may be lucky, but you should expect problems if you do this.

    You must properly install your adobe software using the installation of adobe files.

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Why can't I use my Airport Extreme routers to extend my Google fiber network?

    I had waited for a long time, and finally got Google fiber installed at my house this afternoon.  I had been so excited and had everything for my home network mapped out.

    I've never used router Wi - Fi an ISP, but I read that so many good things about the fiber of Google box Wi - Fi I had planned to make the core of my Wi - Fi network home.  The plan was to have the Google through my home box.

    I have two base stations Airport Extreme AC I used with my old set up with Time Warner.  My plan was to use to extend my Google Wi - Fi network with a floor and one on the ground floor. Unfortunately, I can not understand how to get there.

    I did a hard reset on two of my Airport Extreme routers and went to set them up as extensions, but I can't do it.  I have open Airport utility, select my device, choose 'Other Options', select 'Add to an existing network' and click Next...  Each time, my only option is to create a new network.

    Does anyone know a way around this?  I would really like to be able to have a base station wireless AC in every room of my house.  I also need the Airport Extreme routers set up somewhere in the chain so I can continue to do my wireless Time Machine backups.  Any tips?  I am currently very frustrated.

    Thanks in advance for any help!

    -Brian

    Unfortunately, Apple routers will not be able to extend wireless signal of a 3rd party router. Or, another way of saying the same thing, is that routers Apple will extend only wireless signal from another router from Apple.

    If you could install another Apple router near the Google router and connect the Apple router using an Ethernet cable to the router fiber, and configure the router from Apple provides wireless... then... other airports will be able to extend the signal of the "main" Apple router

    You can use the fiber for a second wireless network or comments... or... If you need another network, there is probably a way to disable the wireless router fiber.

    Another option... If possible... would be to run both of your Apple routers Ethernet cables to the router of fiber. Then, Apple routers can be configured to extend the network of fiber like that.  Note that Ethernet cables should be left in place permanently with this option.

  • Cannot print with HP6840 since I added the password to the Apple AirPort Extreme network

    I recently added to my Mac Airport Extreme network WPA password protection. While I can access the network from my computer, I can't print a HP6840, one of my two wireless printers, even if there is no problems prior to the addition of password.

    I can always print to my old HP LaserJet 6MP using an AppleTalk-Ethernet bridge and managed to reconfigure my second wireless printer to work with the new password.

    I already tried the following:

    Uninstalled/reinstalled the original CD and more recent software/drivers HP printer

    Tried to printer configuration using the Ethernet - half thanks looking for printer, received an error message "Communication error with a printer" and the installation process has failed.

    Checked: Safari bookmarks / Hello: printer does not appear

    Computer and the printer turned off and restarted the computer

    None of these attempts succeeded.

    Any suggestions on how to restore my wireless printing?

    Thank you.

    MichaelT

    Mac OS 10.5.7 iMac with Intel processor

    I spent 3 hours on the phone this morning with the HP Technical Support. While the call cost me $35, it's probably money well spent. After trying all kinds of approaches to installation, we finally concluded that the villain was probably the combination of personal WPA2 to authenticate password on my network and the inability of the HP6840 printer (now almost 5 years) to support WPA2. Tech said that WPA2 wasn't around 5 years.

    So I have two options: delete the password completely and let my unprotected network, use a WEP password (which can create an Apple AirPort and the printer can recognize) or try a WPA password. However, it seems that the airport offer only WPA-Personal and WPA Enterprise, while the printer does not seem to accept the WPA.

    Even if I don't really relish change passwords again, it seems that WEP is the way to go.

    Hope this helps those trying to install old printers on the new networks.

    MichaelT

  • I have to disable the WiFi ATT U-verse service to set up Apple Airport?

    I have ATT U-verse Ethernet and wi - fi.

    I want to connect my Apple Airport to the Ether ATT entering for output to printer HP disk hard NAS and iMac.

    Since I wouldn't need two separate WiFi networks, I ignore, disable or echo the U-verse system in the network of Apple system?

    It all depends on where the AirPort Extreme will be.  If there are a few rooms off the ATT router and you need broader wireless signal, then you can have the airport provide a wireless signal that uses the same wireless network name and password as the ATT network... and you will have a network of "big".

    If the AirPort Extreme is installed near the router ATT and that you plan to use the AirPort wireless, so it wouldn't make sense to have two routers using the same network name. In this case, you can ignore the ATT wireless or clear this check box to enter in the configuration settings for the ATT router.

    If you have often invited and do not want to give your AirPort wireless network password, you can use the router ATT Wireless as a network of "guest."

  • Can ' t install iTunes on a Windows PC running Windows 10 pro 64-bit

    I tried several times to install iTunes without success. I tried uninstalling and reinstalling without success.

    The main error seems to be the 2 error, but I get another error that is great to include the part passing through the installation process. I tried installation in administrator mode, but still none the case.

    Any body can help please?

    Thank you for your help.

    Dave

    Try the steps in this article If you can't install or update iTunes for Windows - Apple Support

Maybe you are looking for