A Captivate 8 file created on a PC opens on a Mac

Similar Questions

• SEQ file created via V2013 cannot open with V2014?

  Hello, I created a file .seq with V2013 edit sequence without protection, but this file cannot be opened with the editor spequence of V2014 in another computer and display a dialog below: :-17100 error code

  Is it on two different computers or on the same computer? If it is two different machines, it is possible that your region on your operating system settings are defined differently from the default language to use for non-unicode programs? If so, try setting the TestStand 2014 machine to match the settings of the machine of TestStand 2013. Also, make sure that the Option on the location tab has the same settings to "Recognize multibyte characters" on both machines.

  Hope this helps,

  -Doug

• Captivate 7 - I created a file but when I re - open, I can't see the text in the text boxes until I click on each text box.  Is this a known issue?

  Hi, I created a Captivate 7 file.  I have some text boxes on each slide.  However, when I close the file and re - open, search text boxes empty.  The text appears again when I click on the text box.  However it is visible in the film.

  When I preview the file, the text does not show in the text boxes.

  Anyone had any experience of this problem?

  Thank you very much

  Anne

  Generally fixed by clearing out the Cache of your project.  You did recently?

• Suspension 6 Captivate with a swf file created in Flash Pro

  Don't know why my code does not work, but I tried a few different things based on what's worked for other people. The code is placed on the frame where I need interaction to pause. None of them does not seem to work. I have a custom Flash interaction that the student must complete before continuing the course.

  Here are the things I've tried:

  MovieClip (root) .rdcmndPause = 1;

  ---------------------------------------------

  var mainmov:MovieClip = MovieClip (root);

  mainmov.rdcmndPause = 1;

  ---------------------------------------------

  var myRoot:MovieClip = MovieClip (root);

  var mainmov:MovieClip = MovieClip (myRoot.parent.root);

  mainmov.rdcmdPause = 1;

  -------------------------------------------

  FYI, I tried both rdcmndPause that cpCmndPause to each of the foregoing. Anyone have any ideas? Also, I'm ready to upgrade to Captivate 8. They make it easier in this version to do this kind of thing?

  Thank you

  Jeff

  frame 1 of my fla source code, I used this event and var to interact with captivate variables:

  var captivateVariables: *;

  addEventListener (Event.FRAME_CONSTRUCTED, isAdded);

  and then this function:

  function isAdded(e:Event) {}

  txt.appendText ("isAdded\n");

  removeEventListener (Event.FRAME_CONSTRUCTED, isAdded);

  try {}

  captivateVariables = object (parent.parent) .getMovieProps () .variablesHandle;

  txt.appendText ("captivateVariables:" + captivateVariables.cpCmndPause + "\n");

  }

  {} catch (error)

  //

  }

  }

  and then I inserted on a slide of captivate Framework 1.

  Note: txt is a dynamic text box, I put on the flash stage I could see what was going on, since there is no trace statement from a captivate running file.

• Captivate 7 files will work in Captivate 8?

  Hello

  Captivate 7 files will work in Captivate 8?

  I created a lot of captivating the 7 projects and I want to improve in order to capture the 8. I want to know if Captivate 7 files will work in Captivate 8.

  Thank you.

  You can use Captivate 8 to open the Captivate 7 CPTX files, but this means while they are upgraded to Cp8 format.

  The main thing you should be aware of the words of the upgrade to the new version of Cp8, is that you cannot automatically Cp7 projects upgraded to use the new HTML5 format Cp8 reagent.  To completely rebuild your project.  However, you can still use normal inadmissible HTMl5 and HTM/SWF output.  EXE is no longer an option with Cp8.

• Embedded captivate SWF to create video slideshow with captions?

  Hello

  I'm pretty new to Captivate and is currently working with 5.5 on a Mac.  I've maybe upgrading to 6.0 soon, so let me know if that will solve the little challenge I'll have with video subtitling.

  I'm working on a project that will have a variety of content, including a lot of video.  I need to provide the captioning encoded video and figured out how to do this by placing the video "on stage" on the slide and have the bar of the reader of the skin with the cc.  The problem is that I want the bar of the player on the video slide show, then Player skin showing on all slides bar isn't an option.

  I can also bring in the video as an object, and then it comes already wrapped in the default Halo player with other drive options.  But for the life of me I can't understand how to add captions (or a cc button) to that player. I missed something?

  I came with the solution is to make each video in a single slide in captivate, that publish a swf file, and then translate the and place them on appropriate slides.  This way they can have captions and their own bar of the player, but I have other informational slides, quizzes, etc., without the bar.  I did a test of that and the only issue I found was that, when published the main project, the captivate zip file should automatically include the flv file.  This seems pretty easy to solve if I just unzip, add the flv file in the folder and re-zipper.

  As I said, it seems to be a solution.  But this project is intended for a LMS where the tech folk have already warned me that they have never have the SCORM implementation in a piece of leave the shelf reliable software.  And since I'm new to this, I want to make sure I'm not in a way that will give me problems on the road.  For reference, I have to pass on the results of the quizing, but we need to monitor the realization.

  In any case, am I missing something and should not have to use a work around in the first place?  Or is there a better way to do it?  Can I use a capioning place to do captions and give back me a bunch of swf (palyer with the video and the subtitles already built in) but I don't know which would be different from what I am attemption.

  Thanks in advance for your suggestions.

  There is another variable that controls the CC (sorry to forget!). It is cpCmndCC and works in the same way. Updated 0 mask legends, assigning 1 shows them.

  To combine them, I would create two shares of standard tip (not sure why Shekhar went with conditional). An action that affects cpCmndCC and cpCmndShowPlaybar both with 1 for the slide show video and an action that affects cpCmndCC and cpCmndShowPlaybar both with 0 for other slides. Then just run the Action appropriate, advanced, entering each slide.

  Personally, I warn against use by leaving. As often pointed out Lilybiri, the execution of an action at the exit of a slide can be risky, since you have reach the last image so he could run. If the user can navigate away from the slide before arriving at the end of the game, or if there is a pause before the end which climbs to another slide, the action will not run and the bar reading/subtitles remain visible.

• Captivate 5 file does not publish correctly

  Hello.

  I have a file in Adobe® Captivate® 5, call him "Module 1" which generates only 2 files instead of the usual 3 files when I publish in Flash.

  In the destination folder, the HTML file is not there, a SWF file is not created (in its place a file labeled 'File' and has 0 KB).  Is the file Javascript correctly.

  While the publication process is happening, all messages indicate it is correctly published.  It presents a preview very well.

  I published another Captivate 5 file with the same settings to see if that would work and it seemed fine.  No problems.

  I don't know how to fix file that will not publish correctly.  I'm choosing publish in Flash, Flash 10, export to HTML.

  I tried editing for Flash 9.  Still did not work.  I tried editing e-mail.  The only file attached to the e-mail was a Javascript file.  Still, it should have 3 files.  Did not work.

  Need advice please!

  CB

  Hello and welcome to the forum,

  It is quite difficult to know what is the problem, the file may be corrupted (maybe a slide or object)? Although not occur so often on the CP5 as it was with the previous versions. Is your updated version: 5.0.2.630?

  Some actions that you could take, but not sure it will help:

  • clear the cache
  • Delete the Preferences file, it is labeled Captivate 5 and can be found in your profile:
  
  ... \users\\AppData\local\
• create a project empty with the same resolution, the slide of the blade (not all at once) copy and try to post when party have been copied

Lilybiri

• sound starts on preloaded Captivate swf files

  I created a custom - swf player preloads a series of external swf "slides" in a single holder clip, stores clips loaded into a table and starts playing the first. The problem is that the audio of some files created by Captivate swf begins to play once the slides are preloaded, and the audio continues throughout the main sequence. stopAllSounds() is called when navigating between the loaded clips - this seems to be the only thing that works to stop the sounds, but they will start again once I start to play the other clips.
  
  It has been very difficult to isolate and resolve - can anyone help?
  
  

  Resolved - I need to loop through all the external clips after they are charged and call rdcmndRewindAndStop = 1 on them (this affects only captive, of course).

  The alternative, generally recommended on these forums, I see, is to place a stop on image 1 of any swf you load; However, they Captivate generated, then an alternative solution was necessary.

  Thank you!

• "file > create new version" missing in the latest update to iTunes

  I used to use the Menu command file > create new version to convert the movies so that they will play on my 1st gen iPad. (The fact that he made them smaller was an added bonus).

  This function seems to be missing or moved in the last update. In its place is a Spartan function convert . If you hold down the option key, you can select «Convert to AAC...» ' which is useful in its own way, but what I'm looking for.

  Does anyone have an idea where the conversion of film went?

  Apple dropped this feature in the last update, because they think classic iPod is obsolete. But you can use the Handbrake or Apple Compressor to do the same job and then mark the files using MetaX or MetaZ, works for my 8th generation iPod classic.

• 5.5.3 pages does not open files created with pages 5.6.1

  Hello

  I have a problem, one of my computers I have Pages 5.6.1. I have many files created with the most recent version of the Pages 5.6.1.

  The problem is that I can not open files created with Pages 5.6.1 use another computer with Pages 5.6.1.

  These files are not compatible? I get an error or anything like that, they simply do not open (nothing happens).

  Thank you

  This is a known issue. Update both machines to v5.6.1 Pages (providing you have Yosemite 10.10.4 or later). Unfortunately, v5.6.1 Pages can also forget open documents of his own creation.

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.

• What format are the files created by the scanner deskjet 4625?

  I want to buy the Deskjet 4625 CZ284C. but I'm not in the specification of what is the format of the files created by the scanner.

  I need the files in. JPG format and the option so that it takes. PDF format...

  need a quick answer, thanks, Zvika

  Hello

  You can scan to PDF and text can be added to documents, JPG and TIF for images/photos. Please see the following book:

  http://h10032.www1.HP.com/CTG/manual/c03345663.PDF

  Kind regards.

• Printing file"creates the *.pm file I can't open

  I've never been able to reopen a .pm file created when I click on "Print to file" in the print screen and save to my desktop.

  When you click on it it asks you what program you want to use to open it, but none of the choices, they give you in the drop-down list works.

  This has never worked on any version of windows or PC so I wonder if the command 'print to file' Microsoft is worth nothing.

  If you have a printer called Microsoft xps document writer, then you can send your document to it and it will print to file, i.e. filename.xps

   

  then all you need is an xps Viewer to see the print job.

   

  Here's more info:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-to-the-Microsoft-XPS-document-writer

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  "annoyedjoe" wrote in message news: 64 a 72473-9 d 49-46ab-9932-80e56766c636...

  I've never been able to reopen a .pm file created when I click on "Print to file" in the print screen and save to my desktop.

  When you click on it it asks you what program you want to use to open it, but none of the choices, they give you in the drop-down list works.

  This has never worked on any version of windows or PC so I wonder if the command 'print to file' Microsoft is worth nothing.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Where are the files created in Microsoft Visual C++ 2005 Setup logs?

  Hello

  Where are the installation saves the files created in Microsoft Visual C++ 2005? I checked the temporary directory and couldn't find the logs for Microsoft Visual C++ 2008.

  Thank you!

  Hi EugeneWhitlock,

  The installation files of all installed programs stored in the C:\Program Files location.

  I would also recommend to post your question in the MSDN forum:

  http://social.msdn.Microsoft.com/forums/da-DK/vcgeneral/threads

  Hope the helps of information.

• Why the system error memory dump files create everytime in vista

  Why the system error memory dump files create everytime in vista

  Please help me find

  Hi ashwin_amb,

  System error memory dump files contain dump files created by Windows because of a stop error. They are created when an application crashes and creates an exception code. The dump file indicates which line or an area of memory the program crashed at and is used for troubleshooting.

  For more information, see the KB article:

  How read partial memory dump files that Windows creates for debugging

  http://support.Microsoft.com/kb/315263

  Hope the helps of information.