USB & wireless printing

Similar Questions

• HP laserjet pro m521dn mfp: HP jetdirect 2700w USB wireless print server connectivity

  I just bought a M521dn Pro Laserjet and a Jetdirect 2700w.  However, the M521dn has only a USB port that does not recognize the Jetdirect.  However, the Jetdirect 2700w is listed as an accessory for the M521.

  The Jetdirect 2700w works with the M521dn?

  Is there a hidden usb port, I am not find to connect to the wireless print server?

  Help, please

  Thanks in advance!

  Hello

  HP jetdirect 2700w USB wireless print server support M521 series including M521dn. Your printer has 2 USB ports, one on the front (use for direct printing without a computer) and the normal port is at the back (not flat port, I usually call it as 'round' port' and you need a normal/standard USB printer cable to connect to the Jetdirect 2700w (round end in the printer and the flat end to the Jetdirect 2700w).)

  

  Concerning

• How to connect a USB-wireless printer to a wireless network without PC

  Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

  The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

  Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

  

  Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

  Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

  

  When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

  Enter the network password if necessary and click Next.

  

  A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

  

  After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

  

  Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

  I hope this helps.

• DeskJet 2510, USB for wireless printing

  I try in vain to use my new printer with my laptop

  (My printer has been connected via usb to the desktop)

  I followed all the instructions - downloaded driver, home / all programs/HP/2510/printer setup & software

  but I never have the option

  "Convert a connected printer USB wireless Printer Setup & Software"

  as stated on the site of HP

  Help please?

  Hi CR3Mum,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on all-in-one printer, HP Deskjet 2510 and the wireless connection. Here is a link to the product specifications for you HP Deskjet 2510. This shows me that this printer is not wireless.

  Thank you.

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• can I use the HP Wireless printing Upgrade Kit to a usb splitter to connect two HP printers?

  

  HP Photosmart C5280 - ┐

  Separator │USB ├ - HP Wireless Printing Upgrade Kit - PC

  HP LaserJet P1505n - ┘

  Is it possible?

  Yes, it's possible!

• Since USB to printer wireless problem. Help!

  My computer is a windows xp from 2002.  Recently, I spent a WiFi modem with connection wi - fi and got everything hooked up okay, except for the HP printer will not print from the computer now.  I can only use the printer manually now.  It shows that it is connected wireless now, but I get an error when I try to print anything the computer off "work has not print due to an error in the printery system".  I ran the wizard wireless to the printer, but still nothing.  I'm not very good at that kind of stuff.  I need someone who knows what to do, cause I sure can't seem to solve this problem.

  You need to "install" your printer as a wireless printer.  The icon is now displayed in the printers and faxes is connected by USB installation.  After the wireless installation is finished, you can either leave the premiera or delete it.

  For your printer user's Guide should be on the CD supplied with the printer. It may have been copied to your computer when you did the initial installation.  If you don't, go here--> http://h10032.www1.hp.com/ctg/Manual/c01856408.pdf

  The User Guide of your Motorola cable modem (which includes a wireless router) is here--> http://tinyurl.com/bayh7wt

  I'm not sure from your description, but I think that you run the "Wireless Setup Wizard" using the controls on the front panel of the printer, as described on pages 62 and 63 of the printer User Guide.  Assuming that's what you were doing, you seem to have stopped before moving on to step 6... which is actually an entirely additional process which is described on page 66 of the use and copied below Guide.  When you perform this procedure, your computer must be connected to the cable modem, or with an Ethernet cable or its own wireless connection.

  To install the HP Photosmart of Windows software on a networked computer

  1. Quit all applications that are running on your computer.
  2. Insert the installation CD provided with the product in the CD-ROM drive on your
  computer and follow the instructions on the screen.
  NOTE: If the HP Photosmart camera is not connected to a network, run it wireless
  Setup Wizard in the network menu on the HP Photosmart camera. If during software
  installation, the software cannot find the product over the network or you were
  Unable to run the Wireless Setup Wizard, you will be prompted to
  temporarily to connect the unit to the computer via the USB setup cable
  install the HP Photosmart camera on your network. Do not connect the USB installation cable
  to the computer so that you are prompted.
  3. If an on the Firewall dialog box appears, follow the instructions. If you see a popup of firewall
  messages, you must always accept or allow the pop-up messages.
  4. on the connection Type screen, select an appropriate option, and then click Next.
  The search screen is displayed as Setup search the product on
  the network.
  5. in the printer screen detected, make sure the printer description is correct.
  If more than one printer is on the network, the printers found screen.
  Select the product that you want to connect.
  6. follow the prompts to install the software.
  When you have finished installing the software, the product is ready for use.
  7. to test your network connection, go to your computer and print a self-test report
  the product.

• Printer Dell 3300 - light USB wireless adapter flashes without connection to printer laser HP 1005

  Tried a few dozen times in the hours to install and sending test page printed is that exit USB flash or printer error light light lights.  Window XP pro.

  Gregg

  Gregg,

  Try to read...

  Implementation of the Dell 3300 wireless printer adapter

  Rick

• Printer maybe Setup connects through USB and wireless printing? or either one or the other?

  I would like to connect my printer to the since my MAC using a USB cable and also be able to use the wireless printing functionality without having to reconfigure my printer.  Is this possible?

  I have a Photosmart 7520

  Hello

  All my tests were using Windows, but I think we can do it for Windows why not Mac. It takes config of the printer as a wireless printer (IE to connect to a network) and install drivers, or applications on OTHER computers and mobile devices.

  Kind regards.

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Help, please. Not detected HP Desktop F4500 wireless printer same w/a usb cable

  My wireless printer has a mind of its own. When I got it, it printed... wireless. My router freaked out & did not work, so I unplugged my router & used my dsl cable to my laptop to connect. I tried to plug the usb cable from my printer to my laptop so I can use it & it didn't work. I brought my printer at the show & restarted my laptop... it worked w / the USB for a day. I got a new router and now my printer is not working yet. RAWR! Help, please. I don't know what to do. It is not work w / or w/o a cable. I've restarted both, but nothing. Thank you all ;-D

  Unplug the USB cable from the laptop, then remove the icons of printer to the printer from your laptop too. Now click on the Menu start > all programs > HP > HP Deskjet F4500 > add a device. Now follow the instructions to reconfigure the printer to connect to your new network. You must connect the USB cable between the laptop and printer ONLY when you are prompted to do so and not before it.

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

  I recently had a problem where printing of pdf documents is out as unreadable solid ink lines. I have it narrowed down to only occurs with specific policies and only a reader of pdf special and only on my hp printer. I suspect that this was due to software updates, but I don't know if it's windows 10 updates or updates of adobe or some other updates. Now I just avoid using the fonts of the problem.

  In any case, an attempt to solve this problem, I decided to uninstall my 5740e hp software and reinstall the software in the hope of resolving the problem. Unfortunately, it has not fixed the issue but left us with a problem even more serious.

  Having resinstalled the software I couldn't add my printer as a printer wirelessly from the HP Print Wizard. He added fine as a usb printer and a web printer but not wireless.

  I added the printer wireless via the windows & Panel devices configuration printer OK. It prints wirelesslessly and via printing web so physical connectivity is very good.

  I really want that he recognized by the HP Print Wizard so that I can scan from the office.

  When I go to add the printer as a wireless printer, it detects the device OK showing its ip and mac, then goes on the installation of the printer and comes back with the unsuccessful installation of the device, and shows the red x between the router and the printer.

  Any ideas? It was working fine until I reinstalled the printer software.

  Another way to scan office without using the HP print wizard?

  All assistnce solve will be appreciated.

  Hi @Phlipper

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• DeskJet 1112: wireless printing

  I bought HP DeskJet 1112, which is advertised as a wireless printer. I don't know how to do wireless. I installed it as it is written, but the software in the CD provided and that in the HP site is 1110 series.  Whwn I unplug the cable USB of the PC does not see the printer. Maybe I am not doing correctly.  Is it really wireless?

  Thank you

  The specification for 1112 Deskjet says that it is * not * capable wireless, see here.

  HP ePrint connectivity capacity

  • NO.

  Mobile printing capability

  • NO.

  WiFi functionality

  • NO.

  Connectivity, standard

  • 1 USB 2.0 PORT

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.