A fabric mismatch detected C mezzanine card

Similar Questions

• SBRIO DIO still available with 9693 mezzanine card?

  Hello!

  I intend to use a SBRIO (9626) and a map of mezzanine 9693 for plugging a 9853E module CAN.

  However, I would also need interfacing #20 DIO, 4AI and 4AO. The signals will be be wired on J502 and J503 connectors.

  Using 9693 mezzanine card, always will I be able to get/check status of DIOs/AIOs using the FPGA?

  Hi zyl7,

  The NOR sbRIO-9626 has only 4 asymmetrical on the J503 connector DIO lines as the sbRIO-9626 isn't a J502 connector. Using the 9693 OR prevents access to the CMR for anything other than the two C series connectors.

  The J503 connector has 16 HAVE and AO 4 so that will work best for your needs that you can access IDC connectors and RMC connector at the same time in LabVIEW.

  The isue with the sbRIO-9626 and the 9693 OR in your application, is that you will only access the DIO 4. If you need 20 DIO, you probably a DIO module in the second location of the 9693 OR add at least 16 DIO for your application. You can then use the 4 DIO embarked on the connector J503 IDC and the DIO on the C Series module to meet the needs of your application.

  You could also add support on your daughter card circuits to multiplex your DIO 20 up to 4 lines DIO the sbRIO-9626 puts at your disposal. That depends entirely on the requirements of DIO, however.

• ProBook 4720 s does not detect the SD card inserted

  I get no response when a SD card snaps, but 8 GB Transcend card is recognized very well of my little netbook from Toshiba.

  This is the first time I tried a card in this HP, although I got it a few months. Running Win 7 Pro 32-bit.  BIOS HP 68AZZ worm F.0F 18/02/2011.

  Well, I contacted HP support and got a helpful response within a day. Siva gave me urls for two drivers that I apparently needed (not very new drivers and I don't know why they were not there in this new machine, but any way..) and they installed, unlike the one I found just for me and giving a message "forbidden". However, once installed, both raised the box "this program cannot be installed correctly" (that I've seen before and never known what to do about it except devoted to work and hope for the best).

  With the drivers installed, the system * fact * detect the SD card so that it has shown in Device Manager and gave sound signals when it has been installed and removed. But he does not have assigned a drive letter and did not show in Windows Explorer, while it was still incommunicado or to serve as a ReadyBoost file storage.

  Thinking that it seemed that HP problems were over and it is now a Windows problem, I spent a few hours to make the seemingly useless things in Windows, all having to do with recovery of AutoRun, which is not.

  Now the SHIFT key while inserting the SD card could start AutoRun. Also, I gave the command 'net start shellhwdetection' and told me that the service was already running. And AutoFix.exe from Microsoft verified that the shell hardware detection service was on and the autostart value. But to step next, as the wizard repair didn't see that other readers, not the SD card, so I couldn't specify only * that * drive AutoPlay wasn't working on, and which ends the program.

  Support software MS said that if ReadyBoost enabled and there (and it was) and still does not work there because some services he needed had been extinguished. So I Dove to the various lists and tried to turn on anything that seemed relevant and which has not already lit.  Nothing seemed to still accept my changes. Very frustrating. But then I went back to where I had left access control panel in Explorer, and I saw that the SD card has sometime been recognized and awarded drive E. Shazam!

  Therefore, all followed the script and I could bring up the window of the tab (in the properties of the drive E) option for ReadyBoost and say, go ahead. He did, and it seems to work very well. It closes fast when I close the lid, with several major programs running, as well as 4 windows in FF with about 12-24 tablets of each, and it took only 60 seconds to wake up this morning.

  So the problem is solved with something good help at HP, but not gracefully or usefully for others, I'm afraid, because I can't say yet exactly what I did.

• I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  Original title: undetected sd eject not

  I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

  From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• X 220 does not detect the wwan card

  My X 220 does not detect the wwan card ("WWAN MSC PRTSWWAN RDY FUL" in the parts list). No section of modem in Device Manager, without any question related to the wwan card. Please someone help me, how to make my OS (Win 7 Pro x 64) can detect the wwan card?

  1.17 BIOS can detect, it worked normally.

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

• Windows 7 doesn't detect SDHC memory card

  Hello

  Just got a new computer from HP Elitebook 6930p with SD card reader integrated with Ricoh R/RL/5C476 (II) card bus controller. I used my Verbatim 4 GB successfully SDHC memory cards in my old machine XP (HP nc 4-mile) something with a SDHC from Microsoft Update.

  The problem is that Windows 7 does not detect my SDHC card when it is inserted. I suspected something similar that I had to do under XP, but I am unable to find new drivers and similar sw patches.

  I tried to uninstall the card reader chip of the Manager of Windows devices as well as all USB controllers (as indicated in an article in this forum), and then restart (so update battery USB), but without success.

  I also got USBDeview sw to see what is happening. It seems that this device (USB 2.0 Flash Disk USB Device) is not connected, drive letter seems fine (G:, no conflicts), device is activated (and it does not help if I deactivate and then reactivate).

  What should I do to have Windows 7 support SDHC cards? It's ridiculous...

  I had the same problem with a SanDisk ExtremeIII 4 GB SDHC. After you install the RICOH Media 2.10.00.04 driver Version, it has been corrected.

  Type: Pilot - storage
  Version: 2.10.00.04 (October 19, 2009)
  System: Microsoft Windows 7, Microsoft Windows Vista, Microsoft Windows XP
  File name: sp45112.exe (4.7 MB)
  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45112.exe

  I found it at:
  http://forums11.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?admit=109447626+1261923676044+28353475&ThreadId=1383223

• App did not detect the SD card on 4.6.1 Simulator and above

  Hi all

  I test my app on 4.6.1 Simulator 8900. My app has a check as follows:

  Determines if an SD card is installed
  {} public static Boolean hasSDCard()

  EFS of the enumeration = FileSystemRegistry.listRoots ();
  While (efs.hasMoreElements ()) {}
  String root = (String) efs.nextElement ();
  If (root.equalsIgnoreCase("sdcard/")) {}
  Returns true;
  }
  }
  Returns false;
  }

  I created a memoery card named as SD - sdcard.dmp to the location card

  C:\Eclipse\plugins\net.rim.ejde.componentpack4.6.1_4.6.1.49\components\simulator

  But my application is not able to detect the SD card.

  Don't know where im wrong. ? I need to create SDcard in any place?

  The code works fine with 4.5 Simulator...

  Please guide.

  ~ Priyanka

  I use slightly different code to detect the SD card but I guess yours is OK too

      public static boolean hasMediaCard()
      {
          Enumeration e = FileSystemRegistry.listRoots();
          while (e.hasMoreElements())
          {
              String root = (String) e.nextElement();
              if (root.startsWith("SDCard"))
                  return true;
          }
          return false;
      }
  

  Regarding the SD card - try to create a directory in the Simulator file, the name of the "SD card" dir. Start Simulator, simulation menu, change SD Card..., select the previously created directory, you should receive a message at that point MediaCard is inserted.

  And please, for future questions use the Java development forum, you will get more answers there

• Skype can not detect my sound card

  If I talk to my friends with a headset on Skype while I play games with them. So, when I go to play Starcraft 2. When the loading screen appears, the audio going to the speakers. Then I disconnect and reconnect my helmet. He goes into the helmet for a second until its return to the speakers. I try again and dies all the sounds. In the caller group, after clicking on call quality info, Skype says "cannot detect your sound card." The volume control on the toolbar says "The Service Audio does not work." On the start menu, I type in its research program, and when I click it, it invites me with "Audio Service not running... You want to enable the Windows Audio Service? "After you click Yes, the sound is catering to the speakers. I reconnect the headset, and it goes to the headset for a second until its return to the speakers. I try again, and all the sounds dies. However, this problem is solved after the closure of Starcraft 2. If someone could solve this puzzle for me, it would be much appreciated.

  It would be best if you contacted Skype support team regarding this issue.

  They are experts in the field of your request and would be in a better position to answer your concerns. You can contact them through this link:
  

  
  

  You can also join the community of users here:

  
  

  How can I contact Customer support https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service?intcmp=SN-Mods
  

• Help with choice of mezzanine card

  I'm having a hard time trying to understand what mezzanine card to use our servers to Blade (half the size).  We currently organize vSphere 4 on servers in a rack with 3 four port NICs installed for a total of 12 interfaces available for ESX.  We do this for redundancy and increased bandwidth.  If I use the mezzanine 10G card looks like it has only 2 10 NICs on the ESX Server.  Even if the bandwidth is large, it is far 12 env, we have for redundancy.  The virtual NETWORK card looks good because he can feature up to 128 'physical' on the ESX Server interfaces.  I need interfaces for my LAN, my traffic from iSCSI SAN traffic and my ports console.  Who would be my best option?

  Thanks for any help you can provide.

  Ken

  Ken,

  With the solution of 10 GB, you assign two 10 GB NIC to a unique vSwitch.  You can then use port groups / VLAN is to separate your iSCSI traffic to VLAN isolated it is.  Before the 10 GB solution best practice was to isolate the iSCSI traffic on its own physical network for all the bandwidth.  With 10 GB iSCSI can exist on the same physical map as your production traffic, but allows to isolate the traffic of the port groups / VLAN.  I use iSCSI storage in this configuration and I had no problem with iSCSI traffic.  With SBS I actually get much better iSCSI performance.

  Thank you

  Jeff

• Hi, I use photoshop CS6 on my laptop with both GPU and when I ho in Preferences-> performance it detects my integrated card. How he move on to my second?

  Hi, I use photoshop CS6 on my laptop with both GPU and when I ho in Preferences-> performance it detects my integrated card. How he move on to my second?

  Very well. I had to put my best GPU as a default value. Now it's working. Thank me for having responded.

• Windows 2008 R2 guest detects no network card

  Hello

  It's my first appointment with the hypervisor,

  my host is on an IBM x 3400 M2 Server 1 quad-core Xeon with 8 GB RAM

  I did a normal installation of vmware esxi 3.5 (the more recent), I put a static IP address and everything seems fine with the ESXi.

  Then, I created a new virtual machine with windows 2008 R2 server 64-bit edition.

  the installation went fine, but when I started and looked through the console, the windows server does not seem to detect the network card, when I checked in the Device Manager, as there was a problem with the network card.

  one last thing I noticed is the mouse movement is slow on the console of this machine, it gives us a hint that vmware tools have not been installed correctly? I checked with the vsphere client and he says that the vmware tools are up to date.

  can someone help me fix this or point me in the right direction?

  Thank you

  Change the settings for the virtual machine, remove you the current network map, add a new and select E1000 as the adapter type.

• ESX 4 not detect the storage card (Fibre Channel)

  ESX 4

  In HP balde (BladeSystem c7000) install new Bay (No. 3), but vmware ESX undetected installed storage adapter (Fiber Channel HP 4 GB Module VC - CF)

  Bay #1 and #2 see this adapter and works very well.

  In the Bay #1 and #2 installed blade Proliant BL460c G1

  In the installed #3 Bay blade Proliant BL460c G6

  We had the same problem with our c7000.  We got a new system with 8 new BL460c knives.  2 blade 8 FC mezzanine card were not ESX 3.5.  We had to reinstall the mezzanine cards to have ESX seen.

  Question would be do you see the HP Onboard Administrator mezzanine card so that the blade?

  Nick

• WANT to Phoenix 810-210nj: my computer does not detect my TV card

  I recently tried to install a TV (Hauppauge 1200) card in my office, I tried in two different locations, it was not detected by the computer.

  Is it possible the slots do not work, or is there another problem.

  The card works in my old hp Windows vista desktop.

  Any help would be appreciated.

  Hello @abeavi,

  I understand that you are having problems, install your Tuner TV WinTV - HVR - 1200 MC PCI - Express on your desktop PC HP ENVY Phoenix 810-210nj running 8.1 for Windows 64 - bit. According to WinTV Media Center Kit Quick Installation Guide for Windows Vista Home Premium and Vista Ultimate, this card is made specifically for Windows Vista, and I doubt that Windows 8.1 will know that it is there.

  If you need additional support on this map I recommend you to contact Hauppauge.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!