Help with choice of mezzanine card

Similar Questions

• Newbie need help with the old graphics card Dell Dimension 2400

  Hi all

  Happy to discover this community and I hope I can get some answers here. Is there ANY video there card that would allow me to see the images that was shot in 1080 p on my old Dell Dimension 2400? Your help is very much appreciated here.

  Thank you.

  Nicolas

  Hi NICOLAS,.

  Motherboard Dell Dimension 2400 does not come with AGP slot or slot PCIex16. You will have to look out for PCI video cards, but most of the cards are low profile cards. You won't get a FHD 1080 p resolution.

• BlackBerry Smartphones need help with the new sim card

  I don't know why I have such a hard time finding how to do this. It's really making me feel like a * beep * here, so any help will be appreciated

  I'm on Sprint here in the United States and I'm on a trip to Romania in a few weeks and I wanted to have my phone all set up in advance. I bought a prepaid SIM Vodafone Romania, and told me that it is active and active international roaming. I tried it in 2 unlocked bolding my 9930 current and my old 9650. All I get is SOS and emergency calling only, both on AT & T or T-Mobile. I can't yet figure out how to get the phone number attached to the card. What's on the map with that he came are BPUK PIN and PUK. And I can't record with MyVodafone on their website without the phone number. I don't really know how to proceed. I was hoping to use SMS in roaming here until I leave.

  Thanks in advance...

  I was able to get the activated through e-mails with vodafone SIM. Just post here my solution in case anyone has the same problem.

• Need help with choice variables remain in the new session

  I have a set of approx. Flash to the top with several variables. Y at - it a simple action script that will allow the user to maintain their choice after the closure of the .swf and revive it?
  Thanks in advance for your help.

  How do check you if these components have been checked or ticked. in fact, I probably don't want to know that.

  you really recommended to use a listener to detect when your components have changed and then you can use the modified method to define your variables and update your sharedobject.

• Help with choice of printer

  I want to buy a Dell printer, would like an HP printer... one that works with Vista... I print a lot of family photos and I want the best out there, regardless of the cost... I would very much help to someone who could advise me on this... and I wish I had some good software with the printer so I could change or better my photos... Thanks to all those who have the time.

  topkatnc,

  If you print a lot of documents, so I suggest to get a laser printer. If this is used for a lot of printing, then an inkjet priter would work.

  Try going to Dell printer Learning Center and it can help you decide.

  Regarding the photo editing software, some people have used Adobe Photoshop for photos. Don't know what other photo editing software is available. You can do a little research on that. I'm sure that Kodak and other companies have some type of software to do this.

  Rick

• Help with the new graphics card on old pc

  I have a dell dimension 3000 'ya I know sad' I would like to add a graphics card and a new soft power since the wife won't let me buy a new PC GRRRR

  I have a GeForce 6200 PCI 256 MB dcr2 it will work in this pc

  I also bought a power electric double w 480 SATAs is large enough to run the new card and the pc?

  Thank you

  You can add the 6200 PCI if you wish.  It does not require an upgrade of the power supply however.  It will work fine on your PSU 250 watts.  I have the 6200 circulating in a Dell with a 250W unit just to get the higher resolutions than the integrated graphic card has been able to provide in support of a monitor.

• Help with bleeding & Trims by card ad

  I'm still at the stage of using InDesign new user. I created a lot of ads before, but models are always already set for me. I need to change the bleed and trim for a new ad, using the specifications magazines. This is what they gave me, and I'm just a little confused on how to implement. I don't know if I start with the page 8.5 x 11 standard.

  Full Page: 7,125 "10,125 x"

  Purge: 8.375 "x 11,125"

  Garnish: 8.125 "x 10,875"

  Any help would be appreciated. Thank you!

  It's a weird spec, but I interpret it as meaning that the size of the page the value 8.125 x 10.875 and ajouter.125 bleed on all four sides. Set the top and bottom margins a.375 and le.5 left and right in and use these guides as the "security zone."  Another interpretation could be that the 7,125 x 10.125 size is what you would use for an addition that is not intended to bleed. You should call them and ask for clarification.

• Need help with the new graphics card

  So my trusty GTX 555 is finally dying after 4 years and 10 000 + hours so I looked in an upgrade and heard the GTX 960 would be a good upgrade for an Alienware x 51 R1. So I got a PNY GeForce GTX 960 Amazon and installed but when I turn on my system it passes to the BIOS screen and is there for about a minute and a half and it beeps every 30 seconds after the screen came. After the minute and a half or two then goes to a black screen and says the brand and model of graphics card in the upper left corner for about 5 seconds, then he sits on a black screen. I did something wrong?

  If necessary system specs:
  330W POWER SUPPLY
  Intel Core i7 2600
  8 GB RAM
  Windows 7

  Have you updated the BIOS?

• With the help of an old sim card in the iPhone?

  I finally convinced my MOM to get an iPhone.

  Here, is the fun part. It is 1200 miles away so I can't be there to help him with this. She lives in an abdelkader * town so not Apple store or engineering support. I do this anywhere in the phone. She bought a reconditioned 5 or 6 for storage AT & T probably will not be that useful.

  It is on AT & T. I'm on Verizon. His current phone is so old that she cannot yet use AT & T cloud backup. It's something Huawei. It has a sim card. My phone does not have a sim card, so I'm flying blind on this one.

  My questions are these. It is theoretically possible for her to use the old phone sim card in an iPhone? I need to identify the card for me, I know. It seems that if it's an AT & T card, it should work.

  Is this what is causing problems for her? She wants to use the card so that it will not lose its photos and will not have to enter all its numbers again. Once the info is in the iPhone, I'll put it up with iCloud so that she should not rely on the map.

  If she can not use the old sim card, what is the best way to get the data of the card and on the phone? It has a Dell laptop. I have not persuaded to get a Macbook yet. I read that I can get a converter any for the card to be used with a USB port. Would it not easier to import the data on his laptop computer, and then in iCloud? Then once she has the iPhone, hover over the address? I'm assuming the pictures import as jpg files. Does anyone know how to import the addresses? I Team Viewer if I can take her cell phone if I need to.

  My other thought is to try to connect his phone to his laptop computer. I'm not sure she can find a cable with USB on one side and everything that will connect on the phone on the other. I'm not sure that it will work at all, but I think it's worth it.

  Ideas, tips or tricks to help me help my mother would be greatly appreciated.

  Where exactly she buys this iPhone "reconditioned"? Apple does not sell reconditioned iPhones and if it has been refurbished by a 3rd party, he will be untouchable as far as Apple is concerned.

  That said, if it is AT & T, she can get an AT & T Nano from AT & T SIM. They charge him for it. Her old SIM does not fit into a new iPhone. Heck, he probably does not take in an old iPhone unless you want to track an iPhone to original iPhone 3G or 3GS, which are obsolete.

  Get photos off the old phone is based entirely on what type of phone is and what kind of data transfer utility (and special cables) are available. If fact, she buys a new iPhone, someone at the AT & T store can help with this and contact transfer.

• SBRIO DIO still available with 9693 mezzanine card?

  Hello!

  I intend to use a SBRIO (9626) and a map of mezzanine 9693 for plugging a 9853E module CAN.

  However, I would also need interfacing #20 DIO, 4AI and 4AO. The signals will be be wired on J502 and J503 connectors.

  Using 9693 mezzanine card, always will I be able to get/check status of DIOs/AIOs using the FPGA?

  Hi zyl7,

  The NOR sbRIO-9626 has only 4 asymmetrical on the J503 connector DIO lines as the sbRIO-9626 isn't a J502 connector. Using the 9693 OR prevents access to the CMR for anything other than the two C series connectors.

  The J503 connector has 16 HAVE and AO 4 so that will work best for your needs that you can access IDC connectors and RMC connector at the same time in LabVIEW.

  The isue with the sbRIO-9626 and the 9693 OR in your application, is that you will only access the DIO 4. If you need 20 DIO, you probably a DIO module in the second location of the 9693 OR add at least 16 DIO for your application. You can then use the 4 DIO embarked on the connector J503 IDC and the DIO on the C Series module to meet the needs of your application.

  You could also add support on your daughter card circuits to multiplex your DIO 20 up to 4 lines DIO the sbRIO-9626 puts at your disposal. That depends entirely on the requirements of DIO, however.

• the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card

  Hello

  It seems that you want to restore the files removed from the memory card.

  I will definitely help you with this.

  I would say you can search the Internet for data recovery software by using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• need help with directx 9.0 c compatible graphics card

  I bought the game sims 2 double Deluxe after I installed it on my computer, I went to play and it me stunned that I couldn't play it I needed to directx 9 compatible .0c graphics card I have spend all yesterday trying to download this program I had some difficulties to good so now I'm asking for help with this

  Hello

  What problems do you have

  error messages?

  Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK

• Help blackBerry Smartphones! Bold 9700 is frozen on start up with the new sim card

  I tried looking for similar topics but could not find more relevant. everyone seems to have no problem with swapping of cards sim on their fat. If there is a thread already open, I'm sorry. I am really frustrated and really need my blackberry to be operational.

  I have a Bold 9700, updated to the latest OS, everything works fine. I recently had some problems with my old sim card so I went to my service provider to change to another (same number, same line, same contract, just a new sim card).

  As it is expected that I was told that when my old sim is disabled, simply insert my new and I use my phone as normal.

  However, when I did this, the phone was stuck at the loading screen (the bar is all white) for eternity (maybe 5 minutes or more) before moving on to the home screen. There is no charge "security check" bar, the phone is completely frozen, no buttons work, the touch pad does not work, it shows 3G top right without the sign of blackberry, there is no service provider name and from time to time the little loading logo clock is displayed.

  I pulled the battery a couple of times and the problem persists. I called the service provider to reactivate the new sim card, they did 3 times, same problem. I inserted the SIM in other non-blackberry phones that I have and it works on all phones. When I put my old sim card in the 9700 disabled, the phone start end in 2-3 minutes, 'check' safety bar according to normal, everything moves, just no connection to the service. When I turn on the phone without sim card it starts fine with a message to say out loud the card sim.

  I even went down to the assistance service technique blackberry from my service provider and they were no help. all they could say was 'we must wipe your phone and reload the software' that I'm trying to avoid, and I can do it myself anyway.

  My phone is unlocked, comes unlocked here in Singapore, I even checked using the method 'MEPD', all disabled.

  This was very frustrating, especially when I need my blackberry for work. What is the problem with my phone? How can the simple replacement of a sim card if difficult on a blackberry when there is problem free for ANY other phone I've ever used? I am now fear when I travel abroad for business and requires a foreign sim card.

  had the same problem and eventually happeing is that I had to reload my os permeable, and then insert the sim card and upgrade again.

  consusming time, but worth it

• Hi, I have dell xps with getforce 525M graphics card but my system video memory 0 MB and I am unable to play the game please help me solve the problem

  I have a dell xps 15 laptop with 1 GB graphics card but every time I try to play any game it shows that not enough video memory.

  my system configuration
  6 GB of ram nvidia getforce 525M last pilot, directX11
  Please help me to solve

  Its a laptop, and so the graphics drivers from this manufacturer of laptop, such indicated on the pages of the Nvidia driver update

• Wanted to buy three licenses of creative cloud for three different users with a single credit card. [was: HELP!]

  Hi, I wanted to buy three licenses of creative cloud for three different users with a single credit card. I am connected to my computer three times and the buyer licenses three. Now, I found that all licenses are associated with MY ACCOUNT! Is this normal?

  Orders are not yet completely resolved, and once this is done, you can directly contact billing support team.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  https://helpx.Adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

  Concerning

  Rajsahree