a handle to the system leak

Similar Questions

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Handle of the object TS_ExprCtrl_Create

  Hello

  I'm using LabWindows/CVI 9.0.1 and TestStand 4.1.1.

  When I debug my DLL CVI with resource tracking tool, I see that the TS_ExprCtrl_Create function creates 3 handles.

  When the Panel is discarded, 2 handles are automatically rejected.

  But there are still 1 handful who's never been discarded.

  There is a leak memory or did I miss something? Use a function to release the last handle?

  Bruno

  This is a memory leak in TS_ExprCtrl_Create. What happens is that ts_exprctrl_create calls TS_ExprCtrl_CreateActiveXControl, which calls TSUI_ExpressionEditGetBorders to get a handle of object at the interface of borders. But CA_DiscardObjHandle is not called on the handle of the borders object.

  I created a (ID 177213) bug report for this problem.

• IM using XP and it keeps running a shutdown of the system initiated by authority NT\SYSTEM w/status code 1073741482 & system process ' C:WINDOWS\system32\services.exe. How can I stop the closure?

  I get the following message: closing system, the system stops. Please save all work in progress and log off. All wukk unsaved changes are lost. This shutdown was initiated by authority NT\SYSTEM. The system process ' C: Windows\system 32\services.exe ended unexpectedly with status 1073741482 code. The system will now stop diwn and restart.

  I tried the boot, and all the days that something did not work if today I'm the switch back to the normal startup. I tried to run a scan, but it does not have the "clean boot" State... it would also not automatic updates... so here Let's go!

  I had the same problem, tried the clean boot, like Wells, and it has not fixed the problem.  Please try this:
  There are several steps to follow.
  The first is a suggestion from one of the blogs with a slight variation.

  First step:
  Enter safe mode.  (Put in the computer market, press F8 several times until the window offering the Safe Mode option appears.  Use your top and arrows to select Safe mode, and then click it.)

  Since the Office Safe Mode:
  1. right click on 'My Computer' and select 'Properties': my computer-> properties. This opens the "System Properties" dialog box

  2. Select the "Advanced" tab

  3. under "Startup and recovery", click on the button "settings".

  4. at the bottom, in the section "System failure", see what boxes are checked. Windows XP checks them all by default.

  5. click on "Automactically restart." This is probably your cause if you get automactic closures. As an alternative to optimise this method, you can, at your own discretion, also do the following:

  i. uncheck "write an event to the system log.
  II. check 'Send an administrative alert' (which should do more to view the sudden error rather than stop).
  III. uncheck "Automactically restart."
  IV. in the combo box of the section 'Write debugging information', choose '(none) '. Note that this will disable the rest under "information write Debuggin".

  6. your finished, then click 'Ok' to close the dialog of void and then 'Ok' again in the "System Properties" dialog box

  That should do it. Some upgrade suggestions are the best propally but I think these security only handle issues related to other areas if they worth downloads of 2 to 5 hours of 56 k modem for added security. However, I find that some updates are not even for my type of installation (due to unused configuration detection?) or I do not use the services.

  For more information on Tweaking, I suggest to look at "http://www.tweakxp.com" If you are a user of Windows XP.

  Good luck.

  Step 2:
  Also in safe mode.

  Some of these steps have been found on the microsoft Web site.  However, the following text is a little different and should translate into success.  It did for me.
  1) enter the Configuration of the utility system.  You can do this by done safe mode right click on Start, by choosing Search, then typing in msconfig and searching the c: drive.  Once the search is complete, click on one of the icons of msconfig.  This will bring up The System Configuration utility.
  (2) click on the tab general select Selective startup.
  (3) click to uncheck the Process SYSTEM. INI file.
  (4) click to uncheck the process to WIN. INI file.
  (5) click to disable Load Startup items.  Make sure that The Load System Services and use Original of INITIALIZATION. INI are checked.
  6) click on the Services tab.
  (7) click to select the hide all Microsoft Services check box.
  8) click disable all, and then click OK.
  (9) computer.

  Step 3: log in to Windows.

  (1) when you receive the following message is displayed, click Select, check box don't show this message or launch the system to Windows Startup Configuration utility , and then click ok.

  If this solves the problem, go to step 4.  If it is not the case, then you will need support from a professional.

  Step 4: find the culprit.

  1) enter in the System Configuration utility (SCU for future reference.)
  2) click on the Startup tab.  (NOTE: If you find "audm" within the list of starting points, it is most likely the culprit.) It was for me. If it is, go to If not, go to 3).
  (3) the top of the list in the start menu, check AN item, then restart the computer. Make a note of each element that starts without failure.
  Repeat this step until you get the window to "Shut down NT Authority... ».  This will reveal that the start point is the origin of the problem.  Once found, go to 4).
  (4) get in safe mode / SCU / Startup / untick the culprit.
  (5) restart Windows.  If this solves the problem, you are almost finished.  If this isn't the case, you will need the services of a professional.

  Step 5: remove the culprit and the reactivation of the process.
  1) go to Start / Search / and look for the item that caused the problem.  (When I did a search for audm - 2 released files.)
  (2) delete all files with the name of the offender and empty your trash.
  3) enter the Configuration of the system - (start/run/msconfig).
  (4) on the general tab, re-enable the Process SYSTEM.ini, WIN.ini processand Load Startup items.
  (5) restart the computer.   The problem should be solved.
   
  Basic suggestions:
  (1) ALWAYS keep a firewall- and choose the option "Open at Startup.  (That's how I think that was my problem - by not having is not the Firewall opens at the beginning).
  (2) perform a virus Scan is every DAY.
  (3) keep all windows programs and drivers updated - every DAY.
  (4) keep all antivirus programs and firewalls updated - every DAY.

  Good luck

  Non-XP-Prof.

• What happens to the system folders, when the volume is dismounted?

  Hi all
  I'm having trbl with Windows Vista Home Premium 32-bit on a laptop computer, which had its main drive partitioned into 3 different partitions: C for the OS, the D for my data and E for backup images.
  Some of the 'system' (blue color), records such as: Documents, photos, downloads, etc have been moved from 'C' to 'd' too!

  All 3 Partitions are NTFS volumes.   Partition "D" gives me wrong in what he tells me that he has problem with the master file table (MFT) and I shud run CHKDSK against it!  TRBL is then

  I try to run it, it says:

  CHKDSK D: /F cannot run because it is used by another process.  CHKDSK may run if this volume is dismounted first.  All handles to this volume would then be invalid.

  You want to force a disassembly on this volume: Yes - No?

  I took NOT because once again, when the disk has been partitioned, some of the 'system' (blue color), records such as: Documents, photos, downloads, etc have been moved from 'C' to

  "D" and I fear that if I remove this volume it will remove or delete (if I reformat the partition), these files and I will not be able to use them more!
  Also I don't really understand what it means to be "all the handles to this volume invalid?

  I copied all my data on the partition "D" (for a portable HDD) and can run the chkdsk against her pgm or just reformat.  Can copy my data to him?
  If I format, it will remove all the (blue) file system on it?   So how do they return to the "D" score for me to copy my data in?

  Can you please help me in this case?

  Thanks a bunch!

  Sincerely, Cin

  Hello

  Information about "readers mounted:

  Mount or dismount a drive
  http://Windows.Microsoft.com/en-us/Windows-Vista/mount-or-dismount-a-drive

  How to mount or dismount a drive or a Partition in a folder in Vista
  http://www.Vistax64.com/tutorials/196423-Mount-Dismount-drive-partition-folder.html

  Check the answer in the other thread on how to run checkdisk (chkdsk) and other diagnoses.

  http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/df91fe3f-2Cd2-425c-85f6-75c0facd6804/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• FTP command does not when the current folder is not on the system drive

  I have the following problem when I activate FTP from the command prompt when the current folder is not on the system drive.

  I have a similar problem when you use a client FTP (ftprush)... It is installed on the D:\ and activation with the startup in D:\ folder reports 10038 (invalid socket handle)... It works fine when the startup folder is c: drive

  (MON C:\ est un petit SSD où j'ai mis les programmes opérationnels et les applications les plus utilisées)... my D: drive is a program for non-intensif progs disk)

  I have check the environment variables but can't find anything wrong with them, and I never touched at these

  Current folder is on my c drive windows :\---> works OK and I can open an FTP site

  C:\Windows\System32>FTP

  FTP > quit

  
  

  I change the folder to the very second disc---> broken, the report "ftp:socket" and the existsd.

  
  

  C:\Windows\System32>d:

  D:\>FTP

  
  

  FTP: socket

  D:\ >

  
  

  
  

  
  

  I managed to solve my problem by making a

  command "netsh winsock reset."

  This solves all my problems... including ftprush, filezila, starting the ASP.NET Server in Visual Studio (which also refused to)

  implementation)

• Windows 8.1 refuses to encrypt the system drive

  Reference Dell place 8 Pro Tablet running Windows 8.1 (not Pro). After much frustration with this unit, I decided to dry completely and do a fresh install of Windows. And indeed, all of my previous problems just disappeared. - But there is now a new: BitLocker refuses to (self-) encrypt the system drive, as it is supposed to do. Windows claims that the device encryption is temporarily suspended but will resume after the next startup. However, no matter how many times I reboot the device, encryption/protection remains in the suspended state. The venue Pro 8 has a secure TPM, or more precisely a fTPM (TPM firmware). I am somewhat familiar with the TPMs management and then I went through procedures to prepare the TPM (which was what the suggested corresponding event logs), but it did not help. As the version of the OS is ordinary Windows (and not Windows Pro), the BitLocker feature is very limited, but sufficient to reveal 'Key protectors' are missing. If I have Windows 8.1 handling of automatic encryption, white protective key test should have been filled as soon as Windows has managed to record a recovery on my outlook account key. That, however, seems will never happen. Maybe because Windows has seen the device before that soft install. But even remove the device from my account, and then add that this return has not changed things.

  To answer my own question: KB2949621-v2

• How to configure the system restore does not delete the specific file such as the .gbp extension?

  Hi all!

  I use software as my ERP system (it handles very important data) and what software is running on FireBird SQL server a there database firebird with extension '.gdb '.

  Some of my partners use Windows 7, 8 or 8.1 and all we/they have a same problem.

  When Windows recognize a system error and to restore of the system (or reboot) and to apply changes this process until the last restore point Windows guarantee also remove data from my database .gdb and in this scenario, I lose all the data entered into these days here (upone the last restore point).

  Thios is strange because it deletes the data from the production database ('.gdb') a step of the backup database (".bkp").

  My question is:

  is there any way I can prevent the system restore to do not touch specific such as .gdb extensions when the restoration of the system (or reboot) is happening?

  i.e.Something as exceptions in the firewall?

  Thank you in advance!

  Best regards!

  Alen

  The only way to prevent the restoration of the system do not touch data is to put the data into an "intact" location, such as your Documents folder.

• Lineage tracing an SQL error: ORA-22813: value of the operand exceeds the limits of the system

  Hi all

  I started playing with OEMM and I get the following error when I try to 'Trace Data Impact' in an Oracle table. Here's what I do:

  • I created a template and collected a few schemas/tables:

  

  

  • Now when I try to "Trace Data Impact' on the table AP_DEF_STG, I get the following:

  

  

  

  I already tried to create a "Configuration" for her, I tried to text instead of graphics, but the error is the same. If I go to a view of Oracle and do a "track Data Lineage", I get the same error again.

  
  

  That someone was already been in this situation? This is the full error trace:

  
  

  ({"error": true, "errorMessage": "SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system"})

  ', 'errorType': 'Line error', 'errorCodes': "[LNGTRC_E0016]".

  ","stackTrace":"Error Codes - [LNGTRC_E0016].

  Request - VizModelLineage

  Settings - showInternalObject [false] showNoType [true] showControlLinks [false] startingIds [17 #4723 #0] isBizUI [false] ObjectID [17 #1 #0] showSummaryView [true] collapseLevel [features] resetCache [fake] profile [] showMappingsAsNodes [true] skipCache [false] tracingDirection [3] tracingType [DataLineage] [ReportTree2202015-104855025] originalStartingObject cacheId [17 #4723 #0] viewType actionType [loadlineage] of viewId [ReportTree2202015-104855025] [ModelLineage]

  MITI.web.common.exceptions.LineageUIException: SQL for tracing line error: ORA-22813: value of the operand exceeds the limits of the system

  at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:284)

  at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)

  at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)

  at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)

  at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:421)

  at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1070)

  to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:611)

  to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:316)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

  to org.apache.tomcat.util.threads.TaskThread$ WrappingRunnable.run (TaskThread.java:61)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: MITI.server.services.lineage.LineageException: (LNGTRC_E0016) SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system

  at MITI.server.services.lineage.database.LineageDataSource.handle (LineageDataSource.java:41)

  at MITI.util.database.CommonDataSource.handleSQLException (CommonDataSource.java:124)

  at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:83)

  at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)

  at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)

  at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)

  at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)

  at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)

  at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)

  ... 21 more

  Caused by: java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system

  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)

  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)

  at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)

  at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

  at MITI.util.database.Query.executeStatement (Query.java:45)

  at MITI.util.database.Statement.execute (Statement.java:66)

  to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)

  to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)

  at MITI.util.database.Transaction.execute (Transaction.java:92)

  at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)

  ... more than 27

  Caused by:

  MITI.server.services.lineage.LineageException: (LNGTRC_E0016) SQL error during the tracing of lineage: ORA-22813: value of the operand exceeds the limits of the system

  at MITI.server.services.lineage.database.LineageDataSource.handle (LineageDataSource.java:41)

  at MITI.util.database.CommonDataSource.handleSQLException (CommonDataSource.java:124)

  at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:83)

  at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)

  at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)

  at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)

  at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)

  at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)

  at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)

  at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)

  at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)

  at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)

  at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:421)

  at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1070)

  to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:611)

  to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:316)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

  to org.apache.tomcat.util.threads.TaskThread$ WrappingRunnable.run (TaskThread.java:61)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system

  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)

  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)

  at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)

  at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

  at MITI.util.database.Query.executeStatement (Query.java:45)

  at MITI.util.database.Statement.execute (Statement.java:66)

  to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)

  to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)

  at MITI.util.database.Transaction.execute (Transaction.java:92)

  at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)

  ... more than 27

  Caused by:

  java.sql.SQLException: ORA-22813: value of the operand exceeds the limits of the system

  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)

  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)

  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)

  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)

  at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1188)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)

  at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

  at MITI.util.database.Query.executeStatement (Query.java:45)

  at MITI.util.database.Statement.execute (Statement.java:66)

  to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:50)

  to MITI.util.database.CommonDataSource$ 1.run(CommonDataSource.java:47)

  at MITI.util.database.Transaction.execute (Transaction.java:92)

  at MITI.util.database.CommonDataSource.executeTransaction (CommonDataSource.java:80)

  at MITI.util.database.CommonDataSource.executeStatement (CommonDataSource.java:54)

  at MITI.server.services.lineage.impl.LineageImpl.traceLineage (LineageImpl.java:554)

  at MITI.server.services.lineage.common.LineageTracer.traceLineage (LineageTracer.java:1078)

  at MITI.server.services.lineage.common.LineageTracer.traceDataLineage (LineageTracer.java:313)

  at MITI.server.services.lineage.common.LineageTracer.traceTechnicalData (LineageTracer.java:176)

  at MITI.web.common.service.facades.LineageFacadeImpl.getLineageGraph (LineageFacadeImpl.java:245)

  at MITI.flash.tabs.VizModelLineage.getLineageTree (VizModelLineage.java:429)

  at MITI.flash.tabs.VizModelLineage.buildLineageGraph (VizModelLineage.java:356)

  at MITI.flash.tabs.VizModelLineage.performAction (VizModelLineage.java:148)

  at MITI.server.servlets.FlashServlet.doPost (FlashServlet.java:156)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:646)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

  Oracle has published OEMM 12.2.1 and this error is gone! So if you are facing this problem in an older version, just go to the newest one.

• failure of the system, looking for answers

  Need help for the guys. Had a major failure of the system last week, and I'm a bit confused as to what happened and why I was unable to get free. I lost a bit of my confidence in Vsphere, and I'd like to renew that.

  A bit on the environment, esxi 5.0 U1, with servers HP Gen 8 3 node cluster running. HP P4500 SAN iscsi for vmfs data storage. ESXi is installed on HP's CF cards in servers. This cluster has been upward and running for about 6 months, not a single hiccup before that.

  Wednesday we have migrated 2 of our vm (SQL and progress) to this cluster 5.0 database, the virtual machine went on different hosts in the cluster. The virtual machine was running on a cluster 2 older nodes with esxi 4.1 U2. Machines migrated fine, fine tools updates, reboot, everything seemed fine.

  About 2 hours after that the migration, we started to receive calls that our Progress database is down, users could not connect. Then we started getting more calls, other machines were inaccessible. Glancing from vcenter I could see all the virtual machines in question were on the same host, and I was unable to open the console in vsphere for VMs on that host. The host showed he was connected, showed all the vm connected, but I could not open the console or the desktop remotely to one of the VMs on that host. I started studying, and of course this host fell all the SAN Iscsi network connections. The railways have shown dead. Ports of nic card viewed active, the switch ports showed activity, but the connections were down. I could always ping the address of management for the host however, and ports for vmotion were in place.

  At this point, I started to try and vmotion VMs on that host data base progress, he would not migrate, just sat at 8% prepare to migrate. I tried other virtual machines with the same result. I started to wonder why HA had not kicked, and why I couldn't move anything. At this stage the host started disconnecting from the cluster. I could always ping on the host, but vsphere showed as disconnected. I couldn't move my VM, and I couldn't go to the host via vcenter, via the vsphere client pointed directly to the host, or by using the DCUI.

  So I called VMware support, got an engineer on the line with me, and it became clear we were going to have to power cycle that host and crash all virtual machine running on it. It wasn't a very pleasant for me answer because this database of progress is our main production system, and I was afraid of corruption. We had no choice, so we did. When the host came back upward, fortunately the virtual machine came very well. VMware engineer digging in the newspapers and said that this was with a particular NIC card driver with known issues. He showed me the KB on this issue, and it seemed to be a known issue. We have updated these drivers on all hosts, and that's all.

  My problem with this is that, how is the cluster ran fine for 6 months without problem, and how come the redundant path to the SAN did not keep the connection active when with the path with the bad nic card driver failed? I have 2 different, with 2 NICs different paths for the Iscsi SAN. The other card had no known driver issue. Why both paths failed not just in cause of a driver on one of the cards problem? More worrying is also how is it that I could not immigrate anything, and why no HA kick in?

  Sorry for the novel here, but without all the details is not part of a story. My biggest concern, that's why I couldn't move anything? In the event of a host failure, what you're supposed to do in order to migrate the machines if they don't migrate via vsphere client? We were down for about 2.5 hours, and a lot of questions were thrown on me the senior management as to why my "system available, redundant high" took hours to retrieve...

  Guys here any ideas, thoughts on how I would have handled it differently, reasons why I should be confident everything is fine now?

  Thanks for your time

  Kevin

  trink408 wrote:

  Thanks Matt.

  I guess some of the problem is not completely understand how the HA or Vmotion. I was under the impression once that the virtual machine was not reachable HA wouldn't kick and move the virtual machine? The virtual machine was not to ping requests or accessible by the Office remotely. I couldn't get their power off or do anything through vcenter either.

  If they had no link usable storage, this seems possible.  HA simply does not address the failures of storage.  Not at all.  It IS possible to activate at the level of the VM HA, but it isn't on by default - must be activated on a per-VM basis.  You should read the book by Duncan Epping on this - it's the bible of the AH.

  So in case something happens with the connection of storage, you have really no way to vmotion anything right here, and your only option is to kill the host / VM running on it, and then migrate or leave HA move them?

  Fix.

  I didn't know that I wouldn't be able to vmotion virtual machine if the host has lost its connection to storage. The other hosts in the cluster saw storage.

  The source host is controlling these VMDK, as far as the other guests are concerned (they see a lock on the file) and when they ask the host if its still alive, he answers (because it has not powered the network lost or down, which are the failure mode THAT HA is designed to handle). So they take charge.

  The reason why it took so long was because I didn't kill the host with my concerns for the database. I was hoping that the VMware engineer may have a way to gracefully close things down. So he spent some time looking around and trying to determine what was going on. Ultimately we just power cycle the host, so I could have done much earlier, and if we are facing this again in the future, I would.

  As long as you follow the seller advised for more decent databases (keeping the transaction logs, etc.), don't have good backups, theres no real risk of data corruption.  VMware does not significantly change the i/o path, in order to have the same exposure than on a physical host.

  I still do not understand why the two paths were marked as dead and the host completely lost connection to the SAN, as well as to show finally disconnected in vcenter.

  Well the host went offline because it got stuck in an all-paths-down scenario, which is common for 5.0.  5.1 solves this problem a little.  I don't know why all roads fell, but I suspect that you have a misconfig somewhere... normally you expect at least 4 paths in a system set up correctly on the left.  Check with HP to ensure that you follow best practices.

  Maybe all the IP stack has been corrupted or something?

  Possible, of course, but unlikely.  Never heard before.

  I appreciate the help and the preview, I thought that the problem was a lack of understanding on my part and fully accept it.

  HA and vMotion are complex.  At least now you can go back to mgmt and tell them why he fell more (because it was a failure outside the scope of the software scenario) and may ask for money to build a proper SQL cluster.  Definitely recommend the book of Duncan Epping: http://www.amazon.com/VMware-vSphere-Clustering-Technical-Deepdive/dp/1463658133/ref=la_B002YJMRCY_1_2?ie=UTF8&qid=1363622697&sr=1-2

• Question: How do how Adobe Premiere Pro 1.5 to load the system described below?

  24/01/10

  I have Adobe video Collection 2.6. (Adobe Premiere Pro 1.5).
  The entire collection will load on my system except Adobe Premier Pro.
  My system is:

  Dell Precision 670 workstation

  Intel Xeon processor 3,2 GHz
  3.19 GHz, 2.00 GB of RAM

  MS Windows XP

  Professional x 64 Edition

  Version 2003

  Service pack 2, v.4566

  When I try to load Adobe Premiere Pro I am presented with the following statement:
  
  DirectX cannot be run on this version of windows. This version of windows is 3.X or a version of windows NT that does not support this version of Direct X. Please do not attempt to install Direct x except in these operating systems. CTX is designed to work with Windows 95 or later and Windows NT 4.0 and later only. This error message can also occur if the material is not compatible with this version of Direct X.

  I loaded the entire collection video V2.6, including Adobe Premier Pro, my portable 32 bit and it loads perfectly. The laptop, however, is not powerful enough for handling serious editing. If it wasn't for the above statement of DirectX I would think that the problem is that Adobe Premiere Pro must simply not load on a 64-bit computer. In addition, in the near future, I want to upgrade to the latest Adobe CS4 Master Collection but must first work with Adobe Premiere Pro 1.5
  
  

  I'm using now on my 64 bit Dell: collection Adobe CS3 - Dreamweaver, Fireworks, Illustrator, Photoshop, InDesign, Contribute, Acrobat 9 Pro, bridge, and hearing.

  I noticed that Adobe is now designing only for 64 bit. Question: How can I get Adobe Premiere Pro 1.5 to load the system described below? Any help would be appreciated.

  Thank you.

  NotAPro

  Increase memory 16 GB on XP 64 with 1.5 will not help at all. Increase memory on Win7-64 will be useful, but not with 1.5. You must upgrade to CS4 for the benefit of that.

• How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support a.

  How can I buy tokens to play poker zynga with an ITunes gift card that I download on my ITunes store account. the system on my IPhone gave me the following message "your purchase cannot be completed, to contact Itunes support support on this Web site, www.apple.com/support/itunes/ww/.

  Click here and ask for help from the staff of the iTunes Store.

  (145085)

• I can add fractions more keyboard &gt; text in the system preferences.

  I want to add more fractions to the keyboard > text in the system preferences.

  When I type in 1/2 he returned half.

  When I type 7/32 I get 7/32.

  Y at - it an easy way to get 7/32 to look like this: > ½?

  Thank you.

  Y at - it an easy way to get 7/32 to look like this: > ½?

  example: ⁷⁄₃₂

  control space opens the viewer characters >digits - all the

  
  

  

  fractions to keyboard > text in the system preferences.

  

• Apple devices like iPads don't leave caches in the system? Yes or no.  If yes how system caches can be deleted?

  Apple devices like iPads don't leave caches in the system? Yes or no.  If yes how system caches can be deleted?

  Yes.

  IOS or system caches are called "Documents & Data" or D & D for short and 'others '. They can be seen by plugging your iOS device on iTunes - on the Summary tab down there will be bar display accurately. They cannot be deleted. The only way to reset is to do a system restore. A restore will reduce the size of D & D and others, but they will start to grow again. However, applications have caches that can be deleted. Safari for example > you can delete all Cookies and data. For other applications, it depends on the application.

  The system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  These items also help explain the caches:

  http://osxdaily.com/2013/07/24/remove-other-data-storage-iPhone-iPad/

  http://www.IMore.com/how-find-and-remove-other-files-iPhone-and-iPad

  https://support.Apple.com/en-pH/HT201656

  https://discussions.Apple.com/docs/doc-5142