A hard disk, several key product

Similar Questions

• Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

  I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

  So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

  If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

  Ahh, this is the crux of the problem... the bootmgr is missing.

  To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.

• imminent hard disk failure detected; product name: F2C07PA #ACJ; operating system: windows 8.1

  Dear Sir.

  I need urgent help! my laptop says that it has detected an imminent failure, although it has not yet been 6 months since I bought it. I ran the diagnostic of the system for

  system and apparent components requested by the system. the SMART test but the test drive 1, failed.

  Failure ID is: RU76X3-6RG733-MFPWXF-61UB03.

  Product no.: F2C07PA #ACJ

  I got my data saved, in case things go worse and I am trying to defragment the hard drive. but he's going to buy me some time.

  can I please know, if there is any way I can get things to normal without spending money (more indifferent). and if 'no' then how much it would cost me to get a new hard drive...

  thanking you in anticipation.

  Contact HP.

  As long as your laptop is under warranty you will be provided with a free of charge replacement hard drive. Have an active warranty is a good thing.

  You will need the recovery media that you have already created to find your laptop to the State, it was delivered at once you install the HDD replacement.

• Question on the hard disk on Satellite M40X

  I'm working on a clients M40x and the hard drive broke down and I would like to replace it and I have some options and I was wondering if they will work.

  Currently, there is a MK6025GAS in which is fried. Below are the options I have.

  1 MK6034GAX
  2 MK8032GAX

  Can I use a Maxtor? If Yes, what models?

  HUGE thanks :)

  Hi dude

  You can use the hard disks of each production. It s any HDD manufacturing is. The HARD drive is important! So you need a drive that supports the enhanced IDE (ATA-6) interface!

  The SATA drives are not compatible.

  The MK6034GAX 60 GB HDD and MK8032GAX 80 GB HARD drive looks to support the ATA-100 interface (ATA-6). So, in my opinion, the hard drives must be compatible and should run

  Greetings

• Dv6 hard disk 3F0 problem

  I have a HP DV6-6001TX with the 6770 m GC. I tried to boot my laptop for a while now, but every time he says hard disk not detected and undetected boot device. I tried to secure the connection from the HARD disk several times without success. What should I do now?

  Hello

  It is perhaps that your hard drive has failed and needs to be replaced.

  As a new trial and to help eliminate a problem with the Sata controller, try the following.

  Follow the procedure below to create a bootable Ubuntu CD and follow the steps in part 3 of 'Try' to see if the operating system is running.  The option 'Try' runs the operating system from the CD without having to install on your HARD drive.  If it works Ok (it will be slow running on a CD), this would tend to confirm that the problem is only with the HARD drive.

  http://www.Ubuntu.com/desktop/get-Ubuntu/download

  If your laptop is still under warranty, you can contact HP and arrange for the replaced HARD disk - you can check your warranty status.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• How can I purchase back level versions of Windows to restore hard disks not bootable corrupt in several Versions of Windows

  I have several SONY computers that hide the source code for VAIO and Windows code in the hidden partition.  I can't buy Sony versions of food because they are more up-to-date except one on Vista. I bought the original code for a 2007 Vista SONY and I'm in my third day of restoration of this system. These SONY computers were cutting-edge at the time I bought them and contain historical data such as taxation, Quicken financial and video making tools and souvenirs. I bought five hard drives that correspond to these various computers and MS Windows 7 Ultimate and professional XP I could check the operating systems MS now called counterfei and locked the keys. The DVD have all markings defined by authentic SM, (never open COA label, proof of license, inner mirror band hologram, perimeter edges wavy DVD hologram, dynamic, fix security logo, etc...).  This is two copies of Windows 7 Ultimate, XP Professional complete Edition.  I need trouble Media Center 2005 on intel dual 3.6 Ghz with 2 GB of mem, XP Professional upgrade of home double 2.0 Ghz 1 GB mem and Vista 32 bit.  MS denied that these are authentic and has blocked their execution.  Their solution is to buy genuine from Ms.  Since Windows in backward compatibility where and what to buy to fix these broken MS insecurity not corrupt vulnerable buggy tested untrusted Windows operating systems?

  I have maybe two HD that have the same system and the product key, but we are not bootable on Windows 7 Ultimate machine.  Any suggestions for a tool that I can fix develop not bootable would be appreciated.  I tried several such as Paretologic and Spotmau with no luck.  This is getting really expensive general MS deficits.

  Hi Boomer6005,

  ·         What is the error you receive?

  ·         How have you activated Windows?

  You can see:

  Windows 7: Activation Windows 7: frequently asked questions

  Windows Vista: Windows Activation: frequently asked questions

  Windows XP: How to activate Windows XP

  Also, try to connect hard disks as a slave to a working machine drive to recover data.

  What about the versions of Windows Media Center, those who were OEM (Original Equipment Manufacturer) specific and if the OEM cannot provide a replacement, you will not be able to find one.

• Best way to connect several hard disks

  HI - since getting my new Mac Pro, I worked with two hard drives of 12 to promised Pegasus 2 Raid-5.  They have been great.  But my video player started to get crazy and so I bought two backup drives WD - 8 to, one to save the key on each PP2 files.  Unfortunately, it was too late to save the video player, as one of the bays failed.  Because it's Raid-5 and with the amazing and patient Vincent promise eSupport, I replaced the failed drive Bay and am now waiting while he rebuilds (if all goes well, without any loss of data).  Then it will get saved.

  Until it became clear that a bad drive Bay was probably underlying computer freezing, loss of images in video playback, etc., I was wondering if there was some sort of best practices for fixing of external drives.  With Thunderbolt, you can chain; But what to what?  Is there a limit any?  Can I plug two disks promise, then the one closest to you on the computer?  Must the WDs be connected in the same way, each to each, and the other to the computer?  Should there be just a Garland of four disks?   ????   In the old days, you had to look at how much energy was used during the USB and Firewire connection, but the true even for love at first sight?

  Surely you'd be recognizing any indication on how best to connect several hard disks.

  Thank you!

  There are 3 unique bus in the Mac Pro black cylinder. Better reactivity is with your readers spread between three buses, keeping in mind that video display takes nearly half a ThunderBolt Bus itself.

  You can use USB-3 for your backup drives - just keep in mind, it is only a sufficient bandwidth behind the USB to operate a chain of reading and writing of full tilt. If you simultaneously use devices more than that, you can start to see some cuts of your maximum transfer rate.

• Reinstall windows on the larger hard drive with the product key, but not drive. PC was custom and retailer out of business.

  It is my mother's computer.  She is 90 and is unwilling to learn a new OS.  I want to reinstall XP on a hard disk that has 300 GB and is already installed in the E drive.  His original hard drive is 40 GB and 35 are in use.  I have the original Windows product key but not the windows CD.  the retailer who has built and sold this pc is out of business.  What is the best way to achieve this?

  You can borrow a retail XP CD from a friend of yours and activate it using your product key.

  Just make sure that if your key is for home then get XP Home etc.

• Reinstall XP Pro upgrade after formatting the hard drive, the invalid product key

  I'm going through a gateway with xp adding purched proessional xp home. The hard drive has been formatted before the upgrade.  When I get the xp professional product key I get an error message indicating the product key is not valid.  The product key, as I enter corresponds to the product key in the business directory to the i386/unatended.txt xp CD.

  Thank you

  Steve

  * original title - family xp to xp pro upgrade *.

  Hi SteveConley,

  1. have you fully formatted the hard drive?

  2. what type of Windows XP Professional CD? It of an upgrade or clean installation CD?

  As you have formatted the hard disk, you can perform a clean install will impose you an operating system available on the computer to perform an installation upgrade.

  You cannot use the upgrade product key to perform a clean installation.

• Replace hard drive, no readable product key; How to reinstall Windows 7?

  I bought a Dell laptop with Windows 7: Home Premium pre-installed a year and half ago.  The hard drive just completely crushed, and I just got a replacement hard drive for it.  The computer did not include a recovery disk, and the product key on the bottom sticker has worn to the point of being unreadable.  How can I reinstall Windows 7 for the new hard drive?

  You need to contact DELL technical support about obtaining a replacement product key because they are responsible for the license that is preloaded on your computer.

• can change hard drive I use data transfer or use the old key product key

  IM changing my drive hard sata to ide old ones and basically gets one more big one I was wondering if I can just coppy transfer data from my old hard drive to new, or just use the old produckt key really didn't wana must buy a new product key can anyone help or give me some info on this I would greatly appriceate it

  No, you cannot, if you want Windows 7 on a new drive with your programs and settings, then it is better you create a system image and restore it on the new drive. See the following for instructions:

  How to pass Windows 7 on a larger hard drive
  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• I own 2 TC4200 both with keys product without disks!

  I own 2 TC4200 both with keys product without disks!

  In fact, I have a full set of drives somewhere in my house, but I don't know where.

  Now what should I do?

  Jim

  Hello:

  If you live in the United States, you must call this number you have a notebook of class business.

  1-800-334-5144

  If HP has more discs for your model, you can always get a game from this provider on the link below.

  http://www.computersurgeons.com/p-18001-recovery-kit-380428-B25-for-hpcompaq-model-number-TC4200-tab...

• My sisters thinkpad XP pro is unstable and it has lost its drive. I can reinstall using my xp pro disk and its product key?

  My sisters thinkpad XP pro is unstable and it has lost its drive.  I can reinstall using my xp pro disk and its product key?

  I fixed it!

  I couldn't work at all Internet Explore.  I finally installed Superantispyware from a USB pendrive and it ran in safe mode without network.  So I ran Malwarebytes and ccleaner.  After a reboot, everything works great again.  I could install Microsoft Security Essentials and get current updates.  After a smart defrag it turns really well now.

  I was able to make a recovery cd set too.  It will be just as good as if I he burned them on a new computer?  I mean can the data used to make these CDs get corrupted over time?  This laptop is 6 years old.

  Thank you for your willingness to help.

  MJ

• When I connect windows, the hard disk works for several minutes

  Hello

  A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

  What windows software using the hard disk with log in?

  Thanks in advance

  motasemsadelghi

  What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

  Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

  http://support.Microsoft.com/kb/310560

  The foregoing is for XP, but also applies to Vista.

• When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

  When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

  Hello

  How do you know that never, it ends when there is no GUI on Vista for Defrag?

  in vista, the defragmentation process works silently in the background

  Unfortunately in vista it does not provide a GUI to show progress as it did in xp

  to do this, you'll need 3rd party defrag programs

  read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

  http://www.SnapFiles.com/get/adiskdefrag.html

  Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

  http://www.SnapFiles.com/get/UltraDefrag.html

  UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

  http://www.SnapFiles.com/get/puranfree.html

  Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

  http://www.SnapFiles.com/get/iobitsmartdefrag.html

  Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.