A plant back to zero help with the battery?

Similar Questions

• Please help with the problems of Vista SP2

  So I spent all day on the forums here and I'm head over heels.  I had problems with Windows update and some other problems on my Dell Studio XPS.  It is a tower with double HDs in RAID mirror running Vista 64-bit with SP2.

  I got it for 3 years and I thought that I clean and correct certain defects to go back to the original Dell factory condition.  That did not fix the update install problem I did cleaning.  Now it's worse.

  I'm trying to install SP2 and get a catastrophic failure 0x8000ffff error-UNEXPECTED

  The onlychange is that several months ago, one of my WD 640 GB drives factory failed and I replaced it with a Seagate Barracuda 1 TB since I couldn't find a 640 GB drive.

  I tried to stop and restart all services BITS, etc. no luck.

  I tried to run among the MS FixIt for the problem of update, but it fails because it says that it cannot initialize the powershell.

  Help, please... I'm hopelessly lost and can not spend more money on this thing.

  Thank you!

  If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and independent (i.e., not a BigBoxStore or a Geek Squad) computer repair shop & ask them to do the job.

• Need help with the API Explorer

  Hi all

  I am creating a workflow to automate certain tasks of P2V and I want to disconnect the NETWORK adapter prior to anyting on virtual machines. When everything is done, I want reconnect you this NIC I play with vCO for a few months now and I need to get help with the part of the script. I always managed to find a code but this time I did not find anything!

  So I need to script this part! I think I found a way to change the connection settings of the VMXNET3 NETWORK adapter with this part of the code:

  System.getModule("com.vmware.library.vc.vm.spec.config.device").getVirtualVmxnet3(backing,connectable,controllerKey,deviceInfo,key,unitNumber,addressType,macAddress,wakeOnLanEnabled)
  var connectset = new VcVirtualDeviceConnectInfo();
  connectset.connected = false;
  connectset.startConnected = false;
  

  Now, I need to find the way to set these parameters to a VM VMXNET3 adapter?

  How to off the virtual machine to these settings?

  Thanks for your help!

  If you are connected to a distributed switch, they canned for this com.vmware.library.vc.networking.connectVmNicNumberToVirtualDistributedPortgroup action.  If this isn't a vds connect you to, then you need to change then it will have to be slightly modified to use normal NIC instead of vds support.  You will also need to add these lines to the device configuration section:

  devicespec. Device.connectable = new VcVirtualDeviceConnectInfo();

  devicespec. Device.connectable.Connected = true;

  devicespec.device.connectable.startConnected = true;

  I copied this action and added these 3 lines to achieve what it looks like you are trying to do.  We don't really use standard switches in our environment.

  Paul

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Help with the part number - paw index screen X230ti

  Can anyone help with the reference number and or the availability of the small 'legs' that sit in the slots on each side of the keyboard on a X230ti? They locate into the slots with the screen and prevent movement when the lid is closed.

  I have the same and among the small beasts broke and the screen tends to rotate when closed.

  Have searched for a parts list but cannot find the "paw" in any list that I found. Thank you

  Here is a picture of the X230t keyboard (and palmrest) framework. You can see the small 'legs' to belong to him.

  I hope someone from Lenovo will tell you how to order this part. EDIT: part number 04W6808.

  

• Help with the purchase of a microSDHC

  I recently filled my Fuze, upgraded to the latest firmware and I'm ready to increase its capacity. I thought to buy a 8 GB Sandisk from amazon, but I'm not if I need a SD adapter so I can connect it to my computer. If I keep it plugged the "rocket" I will be able to access the card through the device, or it will appear as a separate storage device? Any help with the purchase of a microSDHC will be greatly appreciated.

  The 8 GB SanDisk microcard works perfectly, and you can plug just the "rocket" and most likely to leave it there. When you connect to your computer the microcard will appear as a separate... drive for example, on mine, the "rocket" is the J: drive and the card is drive K:

  Anything on the card will be perfectly integrated into the memory of the "rocket" when using it.

• Helps with the rv180w and the Shrew soft vpn

  Hi, I'm trying to establish a vpn connection by using soft shrew for the cisco rv180w router.

  I watch and read everything I could find, but the connection drops during the opening of the tunnel.

  There were a few tuttorial here in the forum, but the links are down.

  I want Edifier is to establish communication and to be able to access my domain on the network.

  Any help with the settings would be greatly apeciated. I am new to vpn.

  Thanks in advance.

  Federico,

  Try to access the following link. It has good instructions for a similar model. The main difference is that the SA500 has double-WAN and the RV180W does not work.

  https://supportforums.Cisco.com/docs/doc-9378#comment-7216

  Here's another tutorial for the RVS4000 that can help:

  https://supportforums.Cisco.com/docs/doc-18443

  Check out the last post in the following thread, which received instructions for the RV220W (should be exactly the same as RV180W)

  https://supportforums.Cisco.com/message/4165652#4165652

  -Marty