a program run by sendint to a memerystick and on the Xbox

Similar Questions

• Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. He

  Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. Help

  It seems that something has been added in the folder on the drive. I would recommend http://labs.adobe.com/downloads/acrobatcleaner.htmluninstalling the program, running, removing any left over parts of the record player (this could be the problem), reboot and reinstall. If all goes well, that solved the problem. Future questions about the player, you should consider asking in the forum of reader, is not.

• I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it?

  Wireless

  I was clear something in Add/Remove Programs, that my laptop go on restart, and after the disappearance of this button wiraless. I can't find it in the Control Panel, on the toolbar... How do I return it? Sorry for the bad English.

  Hi Zeljka Djordjevic,

  ·         What program did you delete?

  I suggest to perform a restore of the system and check if the problem persists.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• I have a Mac and LR 6.5.1 installet. Tonight I downloaded the trial version for the LR CC photographer. But whenever I try to start the program it start LR 6.5.1 and not the CC version

  I have a Mac with LR 6.5.1 installet.

  Tonight I downloaded the trial version for the LR CC photographer. But whenever I try to start the program it start LR 6.5.1 and not the CC version.

  I was told that I could have the two program installed on my computer

  JEG h fået lagt problemet. Det er ikke possible in LR CC test nar jeg har en LR 6.5.1 installeret. :-)

• Firefox is running very slowly. I reinstalled and removed the addons, but nothing helped. I don't have a malicious software.

  Actually, Firefox stopped working. When I type something, it takes about 5 seconds for each character. I uninstalled and reinstalled the browser. I disabled all addons. Nothing seems to work. It started about three days ago. I do not understand what caused it. He just started does not. I did a scan for malware, but there is nothing on the computer.

  Hi lprice1023, please take a look at Firefox is slow after upgrading to Firefox 38

• Cannot stop a USB device due to some unknown program running.

  If I can't stop a device USB due to some unknown program running (like a virus), how can I find the program, so that I can stop it with the Task Manager?

  Hello

  The message (this device is currently in use. Close any programs or windows that might be using the device, and then try again) is usually the result of an application, file, open the document, audio or video, or any other application is being used (ranging from the USB key) when you try to remove it by clicking Remove the device safely in the notification area.

  The error can also be caused if your anti-virus is actively followed / analyze the USB drive. Normally, where the withdrawal of a USB flash drive, Windows must stop all operations of reading / writing on the disk so that it can be removed safely. If this is not the case, the flash player may be damaged or lost or corrupted data. However, if Windows determines that a file is in use, it can then provide a message that indicates the volume cannot be stopped now.

  So, before to eject or unplug a mass storage device, make sure that none of these activities are performed on the mass storage device before ejecting.

  A cut-off device

  Most USB devices can be removed and unplugged. When the fact of unplugging storage devices, such as USB flash drives, make sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in the tray on the side right of the bar tasks, you can use it as an indication that devices have finished all operations in progress and are ready to be removed. Click the icon and you will see a list of devices. Click the device you want to remove. Windows will display a notification to tell you that it is safe to remove the device.

  I also suggest you make a system full scan just to be sure.

   http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Windows Defender stopped running on 6/17. Now I get the error 0x800705b4.

  I rebooted, attempted to restart and got the above error message.  I also received a message of error 0x800106ba.  I tried to down load Windows Defender for Vista, but it will download it will not be installed.  The message is 'you don't need to install this software, because Windows Defender is included in Windows Vista.  You can access Windows Defender from the Security section of the Windows Control Panel. "Of course, when I try to run Windows Defender, I get an error message of"0x800106ba.  A problem caused this program service stop.  To start the service, restart your computer. Well I have and I still can't Windows Defender to start.  All of my Microsoft updates are in place.  Help!

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• How can I configure things if a program runs automatically at startup?

  I have a video surveillance program, I would have run automatically using my UID, not root login, when starting my Mini (its running OS X 10.11).  What is the best way to do it?

  Configure a user account for doing this, set this auto connect user account & also to set the application to open a connection point. System Preferences > users and groups is where you manage all that Setup.

  If you need a 'device' you should probably look at running Linux or something that is not as heavy user in OS X: this is very dependent on user names to run applications. You will need to configure the lock screen to restrict access to these user data to anyone with physical access, be aware that this configuration is not ideal for security. Someone could just restart and access the data before the screen saver locks the screen, you could start via a login script, but it is perhaps too easy to defeat too.

• I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same message

  Question
  I get an error message Firefox is already running. I rebooted and redownloaded the program and continue to receive the same message

  See:

  • https://support.Mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
  • http://KB.mozillazine.org/Profile_in_use

• First crash of HP program running with arguments in the RPN

  (The first HP 20150427 firmware version)

  The following basic program will result in the application crash and HP first reboot when running in RPN mode. When executing, it calls for the parameters and then crashes when you press OK to continue execution of the program.

  If I switch to the entry of MANUAL it works very well, however I used to be a fan of RPN so by default, I'm in RPN mode.

  If I put two arguments on the stack and calls the program with CRASH (2) popping the arguments, it works very well.

  EXPORT CRASH (T, P)

  BEGIN

  PRINT (T);

  PRINT (P);

  END;

  Investigation on a bit further, the following program always works, regardless of the input mode:

  EXPORT WORKS()

  BEGIN

  T LOCAL, P;

  INPUT (T);

  INPUT (P);

  PRINT (T);

  PRINT (P);

  END;

  The problem is therefore a very bad error handling in running HP PPL, in the case of a stack overflow. In my view, that it is a BUG in the firmware; rather than crashing and restarting the first HP, it goes down gracefully with a "stack overflow" error

  How can I create an official bug for this problem report?

  This issue seems to be fixed in version 2015 6 17 (8151). I can't reproduce the error.

• I can't uninstall Firefox. I tried my Add/Remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it won't work. Firefox is the only program that I am not able to uninstall u

  I am unable to uninstall Firefox. I have tried my add/remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it will not run. Firefox is the only program I am not able to uninstall using the normal methods
  

  This has happened

  Just once or twice

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR = {357DAD02-321A-4E1D-8305-C8CE3D8CA934}; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 2.8; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  I ' v tried running C:\Program Files\Mozilla Firefox\uninstall\helper.exe.
  It does not work.

• Use a channel when you declare two and it changes when the program runs.

  Hello

  For the use of a map of 4461:

  With the use of the library DAQmx:

  When I use 'Create Channel.vi' I can to use 'Ai0:1' to use the 2 input channels. Then I use the Nchannel Read and split the signal with for example a "Board index".

  But is it possible to change the channel numbers 'on the fly' so when the program is running?

  The same question with the outputs

  When I use the channel to create for outings and I use Ao0:1 to use 2 output channels, can but I change to a single channel when the program is running. Nchan write.vi is used, and this requires 2 channels. The use of a channel will give you an error.

  Is there a nice way to handel this?

  Greetings.

  You can change the output to a level of 0 volts instead of what you read. It should be just a case statement and the writing remains the same.

• Error 200279 and slow program running

  I read a lot of posts about this error but still cannot fix mine. During the execution of the program realizing measures of error 200279 turns suddenly upward. In addition, the program is very slow; I'm trying to read data from a QD and a PSD (two different position detectors) and when I move a detector (QD or PSD, it doesn't bother me) the program response is too slow. I tried to correct the error by setting the value for timeout - 1, but the error is still there. What can I do?

  Thanks in advance,

  Mercurial

  P.D.: Error 200279: tried to read samples that are no longer available. The requested sample was already available, but has since been replaced. Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem.

  You need to understand why your VI is so slow.  It go fast then slow down over time?

  I see a lot of things that could cause slowdowns.

  1. a lot of Express VI.  VI Express is designed to facilitate the installation and quickly start code.  They are not known for efficiency.  FIX: Use the regular functions of LabVIEW such as DAQmx and file write.

  2. you write to a file within the loop.  File writing is usually slower than other functions.  Maybe your hard drive slows you down.  FIX: Use producer/consumer and transfer the file to write to another loop indepdendent.

  3. you build graphics XY in the loop.  Inside that express the VI, it is continually adding more data in the tables stored in the shift registers.  These berries grow, windows must track more contiguous memory to store the data.  Eventually, it would run out of memory.  What size are these graphs?  FIX: Sometimes delete these graphics.  (EDIT: I see that you have the "erase data on every setting turned on for that call.)  This may not be a problem.)

  4. you write to the nodes property of each iteration of the loop.  Changing the properties of controls can be quite slow at times.  FIX: Write to a property node where the properties really change.  True to the visibility properties Plot writing is really bad, because you do each iteration, that it never changes.  You may as well just outside the loop.

  Your code to see how long each iteration of the loop is actually taken from reference.  Turn the pieces to see if you can speed it up.

• I like to keep a true-false program run

  Hello!

  I'm new to labview, and I began to practice. I would like to create a small program that generates a random number from 0 to 100, and the user can enter a number of his choice, then the program says if it is equal or not. I'm almost done with it, my problem is that I run the program, it generates a number, indicates if the number in numerical order is equal to the random number, and it stops. So if I change the number in the control, nothing happens, but if choose to run the program continuously, it generates numbers of every moment.
  So my question is, how do I keep the program running, without changing the random number, so that the user has time to enter its own number?
  Thanks in advance!

  I joined my program.

  You need to place the code in a while loop. Add a stop button so that the user can tell the program when to stop.  Also put a wait function (ms) in the loop with 100 to 200 ms delay if the loop does not turn millions of times per second while you wait for the user to enter a number.

  When you get more advanced with LabVIEW, you want to learn how to use the structure of the event for programs like this.

  Lynn

• KB2442962 wedge of programs running in user mode

  When KB2442962 is installed, unprivileged user accounts are unable to run certain programs. I suspect that it only affects 32-bit software. Once a program is at fault trying to be executed, the Start button can be clicked but I'm unable to click on the icons or type in the search box. The program will continue to hang until I disconnect, date at which I get an error saying I have too many 16-bit programs running. This problem does not exist when you run the same programs from an account with privileges.

  I am running Windows 7 Home Premium.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft