A query in the stored procedure

Similar Questions

• I need to return the result of a query on a stored procedure

  I need to return the result of a query to a stored procedure, I mean when I run a stored procedure it returns a result set in a select statement.
  Best regards...

  Hello.

  Do you really want a stored procedure for this?
  Why not just a script that contains the query?

  Assuming that you don't really want a stored procedure, you'll have to decide what to do with the results.
  An option is a slider.

  For example, you can write a procedure of this type to hold the query:

  CREATE OR REPLACE PROCEDURE USP_TEST
  (     out_cursor     OUT     SYS_REFCURSOR
  )
  IS
  BEGIN
       OPEN  out_cursor
       FOR     SELECT     *
            FROM     scott.emp;
  END  USP_TEST;
  /
  SHOW ERRORS
  

  You can move the cursor to another procedure for handling.

  You could test this in SQL * more by creating a variable blond:

  VARIABLE     usp_test_cursor     REFCURSOR;
  
  EXEC  usp_test (:usp_test_cursor);
  
  PRINT     :usp_test_cursor
  

• Block based on the stored procedure cannot modify Default_where clause

  Hi all

  I tried to create a block based on the stored procedure that it works very well with the result set for the refcursor. But if I need to add filters on the block using where clause in the palette of goods or

  using the property block set in where clause, it does not error but does not review filters .

  tried everything to you please let me know. This is a restriction whereby we can set filters on the block when we create the block based on the stored procedure.

  Thank you

  Check in Form Builder Help:

  Creating a block of data from a procedure that uses a ref cursor

  ... You can't pass a WHERE or ORDER BY clause clause in a stored procedure.

  But you can send your WHERE condition using the query Source Arguments.

  If the procedure is on the side of the database (not in the forms module), ensure that the procedure is not vulnerable to injection of SQL code.

  Kind regards

  Zlatko

• Materialized view, based on the stored procedure

  Hi all

  is it possible to create a materialized view on the results returned by a stored procedure?

  If this is not the case, do you think that any other way except for filling a table with data from the stored procedure and then founded the MV on it?

  Thanks in advance.

  MichaelTsilikidis wrote:

  Sorry I don't speak properly. In fact the procedure does not return a value, it fills one of its parameters (of the ref cursor type) of data. That's what I wanted.

  No it's not.

  REF CURSOR don't store data, so it's not possible.

  A Ref cursor is just a pointer to a query... and you can't "select from" a ref cursor, you can retrieve only one open.

  PL/SQL 101: Understand the Ref Cursor

  As correctly stated above, you can't question from a procedure to a function, and a materialized view is based on a query, you cannot use a procedure in a materialized view.

  You could use a function pipeline instead of a procedure, or have the pipeline function obtain the results of the procedure and pipelines, and then the materialized view could be based on the results of this function in the pipeline.

  example of function pipeline:

  SQL > CREATE or REPLACE TYPE AS OBJECT num_descript (num number, descript varchar2 (30))
  2.

  Type of creation.

  SQL >
  SQL > CREATE or REPLACE TYPE tbl_num_descript AS TABLE OF THE num_descript
  2.

  Type of creation.

  SQL >
  SQL >
  SQL > CREATE or REPLACE PACKAGE AS-reftest
  2 FUNCTION pipedata (number p_choice) tbl_num_descript RETURN PIPELINED;
  3 END;
  4.

  Package created.

  SQL >
  SQL > CREATE or REPLACE PACKAGE BODY AS-reftest
  2 FUNCTION pipedata (number p_choice) tbl_num_descript RETURN PIPELINED IS
  3 v_obj num_descript: = num_descript (NULL, NULL);
  4 v_rc sys_refcursor;
  5 BEGIN
  6. IF p_choice = 1 THEN
  7 v_rc OPEN to SELECT empno as num, ename like descript FROM emp;
  8 ELSIF p_choice = 2 THEN
  9 OPEN v_rc to SELECT deptno as num, dname as descript OF THE Department;
  10 END IF;
  11 LOOP
  12 FETCH v_rc INTO v_obj.num, v_obj.descript;
  EXIT 13 WHEN v_rc % NOTFOUND;
  14 PIPE ROW (v_obj);
  15 END LOOP;
  16 v_rc NARROW;
  RETURN 17;
  18 END;
  END 19;
  20.

  Package body created.

  SQL > select * from table (reftest.pipedata (1));

  DESCRIPT NUM
  ---------- ------------------------------
  7369 SMITH
  7499 ALLEN
  7521 WARD
  7566 JONES
  7654 MARTIN
  7698 BLAKE
  7782 CLARK
  7788 SCOTT
  KING 7839
  7844 TURNER
  7876 ADAMS
  JAMES 7900
  7902 FORD
  7934 MILLER

  14 selected lines.

  SQL > select * from table (reftest.pipedata (2));

  DESCRIPT NUM
  ---------- ------------------------------
  10 ACCOUNTING
  SEARCH 20
  30 SALES
  40 OPERATIONS

• user_table should be used in the stored procedure.

  Hello
  
  I want to find my permanent table user_tables and then drop and recreate it,
  
  I can use this user_tables in my stored procedure for above purpose or is there any notice that must be used.
  
  SP is admin sp, used to run in offline mode.
  
  yorus truly
  
  Published by: 944768 on 10 February 2013 23:44
  
  Published by: 944768 on 10 February 2013 23:44

  944768 wrote:
  but I wanted to know that can I use user_table in above proc stored to conclude and then drop and create it when Everitt runs?

  Oracle manages two "flavors" of the stored procedure - copyright and rights of the Summoner. Rights of the DEFINER (default) is always performed under stored security area of the owner of the procedure no matter who calls it. So, if you ask USER_TABLES (or any display USER_, besides) within DEFINER rights stored procedure, you will get a list of tables owned by the owner of the stored procedure, not stored calling procedure. Rights (AUTHID CURRENT_USER) stored Invoker procedure is always carried out under the domain of the calller security. Therefore, if you are querying USER_TABLES (or any display USER_, besides) within the Summoner rights stored procedure you will get a list of tables belonging to the appellant a stored procedure. Hope it answers your question.

  SY.

• Need help, run the stored procedure in ASP.

  I have a web page in which I would use a query like http://ereply.us/q/l.asp?id=383966476 string

  It directs the user to a page that contains the following code:

  <!-queue = "database_connection.asp #include" - > "
  < %
  If not isempty (request.querystring ("id")) then
  SQL = "exec dbo.fp_qr_code @sequence (request.querystring ("id")) =" "
  
  If rs.state = 1 then rs.close
  RS. Open sql, conn, 3, 2
  
  If rs.recordcount <>0 then
  session("Name") = rs ("name")
  session("JobID") = rs ("jobid")
  session("SEQ") = rs ("seq")
  
  If rs ("id") <>"" then the answer. " Redirect ("index.asp")
  end if
  end if
  % >

  It queries a SQL database to return the value of 'name '. In turn, according to the code of the user should be directed to 'Index.asp' that contains:

  Welcome < % response.write (session("name")) % >

  And the page you should see the page with"Welcome".  Instead, I get a server 500 error.  The stored procedure runs as a stand-alone query in SQL Management Studio.

  Any ideas would be greatly appreciated.

  I solved this.  This is the query that worked:

  < %="">< br="">SQL = "" exec fp_qr_code ' "& request.querystring ("id") &" ' " < br=""> set rs = Conn.Execute (sql) < br=""> if rs.eof then response.write ("no registration") < br=""> while not rs.eof" ""
  response.write (("name") rs)

  response.write (("imgname") rs)

  response.write (rs ('url'))

  RS.MoveNext
  Wend < br=""> %>

• Using the stored procedure

  We use the procedure attached to within an ASP application obfuscation of the password database. I am able to use the same procedure in CF without modification? Right now, I have tried with cfstoredproc but'm "Procedure 'dt_External_Encrypt' expects parameter '@Encrypted', which was not supplied."
  
  
  
  

  You do not use the ODBC driver.

  Most likely, there is a typing error in the code or the stored procedure is not also displayed (or a copy).

  Change procedure = "dt_External_Encrypt" to procedure = "dbo.dt_External_Encrypt" "

  Open Query Analyzer, 'Edit' code stored procedure and make sure that it is really such displayed.

  Finally, try changing returnCode 'no '.

  If all else fails, join the code exact CF code and code from Query Analyzer.

• How to call the stored procedure from javascript? (Google suggest, AJAX)

  Hi I want to set up a text field so that it behaves like [Google Suggest | http://www.google.com/webhp?complete=1 & hl = en].
  
  I read this post .
  
  Now, I installed everything according to this document. But it simply doesn't. And I don't know why.
  
  I think that problems can fall into the following three categories:
  1. the text field and the page invoking the appropriate javascript?
  2 - is the JavaScript call the stored procedure?
  3. the stored procedure correctly returns the result formatted?
  
  I'm assertive for 1 and 3, but I'm not sure 2. Because I don't know how if a stored procedure has been called? Is there a PL/SQL statement that I can query in SQL * more?
  
  Also, I would like to know how to debug AJAX in the APEX. It involves a lot of things.
  
  Finally, I used APEX 3.2 and Oracle XE. I can't find file dads.conf or marvel.conf. Is ' / apex / "the virtual directory for APEX?
  
  Thank you very much!

  Buffalo,

  I managed to make it work on XE with APEX 3.2!
  It took more time than expected because my XE installation was still on an earlier version of the Apex and I had put it first...

  But that's what I did:
  -in the ac.js file, I changed the path ' / apex / "and I added the ac.js file to my candidacy as a static file. So as you did.
  -J' copied my request to the XE and copied my procedure on the schema that is related to my request
  -J' gave to run anonymous rights my procedure

  Now at first, it did not work...
  Then I suddenly remembered something: If you want to run a procedure through the pl/sql gateway in the XE, XE please how it is.
  Do you this by changing the APEX_030200.wwv_flow_epg_include_mod_local function!

  This is the code for the function changed for my example:

  CREATE OR REPLACE function APEX_030200.wwv_flow_epg_include_mod_local(
      procedure_name in varchar2)
  return boolean
  is
  begin
      --return false; -- remove this statement when you modify this function
      --
      -- Administrator note: the procedure_name input parameter may be in the format:
      --
      --    procedure
      --    schema.procedure
      --    package.procedure
      --    schema.package.procedure
      --
      -- If the expected input parameter is a procedure name only, the IN list code shown below
      -- can be modified to itemize the expected procedure names. Otherwise you must parse the
      -- procedure_name parameter and replace the simple code below with code that will evaluate
      -- all of the cases listed above.
      --
      if upper(procedure_name) in (
            'MATTHIASH.INCSEARCH') then
          return TRUE;
      else
          return FALSE;
      end if;
  end wwv_flow_epg_include_mod_local;
  /
  

  After that, the AJAX function worked as expected...

  HTH
  Matthias Hoys

  Published by: mhoys on August 13, 2009 15:24

• Key of the stored procedure

  Hello
  
  I have a function in the db that returns a numeric value after passing an Id (digital). How do I create a join in physical layer as funtion will return a digital and given that it is a function, it can return only a single column.
  
  is it possible that I can keep the id (parameter) in the phycisal layer which I'm passing to the function, so that I can join neccasy in the physical layer with fact/Sun to the stored procedure.
  
  is the possible creation of mutiple stored procedure in physics if my function to only return a single column.
  
  Concerning
  Issue

  If I understand your question, you have a function that returns a numerical value based on an ID, we'll call it Customer ID as a sample. What you need to do is to create a view like this:

  CREATE THE VIEW IN CIRCULATION
  SELECT CUSTOMER_ID, get_outstanding (CUSTOMER_ID) FROM CLIENT

  You can then query this view like this:

  SELECT * EXCEPTIONAL WHERE CUSTOMER_ID = 999

  You could also use this point of view in your physical layer and attach it by customer ID. If you already have a table of facts, you could put a top view to add the extra column with your function. It of all good and should work fine with a warning. PL/SQL execution on SQL functions is not effective. Oracle has switch context between SQL and PL/SQL for each line and change in context is an expensive operation. In a proper system of DWH you préremplira your fact table with the results of get_outstanding for all customers so that there is no delay in the calculation it when OBIEE queries data.

• How can I transfer content from an XML file in a MS SQL database of the stored procedure using LabWindows/CVI SQL Toolkit?

  Hello

  I have a problem to transfer content to an XML file in a MS SQL database through a stored procedure data/fixed. I am able to transfer the content of the file using method...

  HSTMT = DBPrepareSQL (hdbc, EXEC usp_InsertReport " ... ");

  resCode = DBExecutePreparedSQL (hstmt);

  resCode = DBClosePreparedSQL (hstmt);

  ... but in this case, I am not able to read the return value of the stored procedure.

  I tried to follow the example of the stored procedure in the help documentation (DBPrepareSQL), but I miss a xml data type?

  No idea how to solve my problem?

  Cake of KR

  DianaS salvation,

  Thanks for your comments. During this time I found another way which fullfill my needs:

  resCode = DBSetAttributeDefault (hdbc, ATTR_DB_COMMAND_TYPE, DB_COMMAND_TEXT);

  sprintf (sz_SqlStatement, "DECLARE @TESTID INT EXEC @TESTID = usp_InsertReport ' SELECT 'RetVal' %s = @TESTID", sz_Buffer ");
  HSTMT = DBActivateSQL (hdbc, sz_SqlStatement);

  While ((resCode = DBFetchNext (hstmt)) == DB_SUCCESS)

  {

  / * Enter values in the record. */

  resCode = DBGetColInt (hstmt, 1, & s32_TestId);
  }

  resCode = DBDeactivateSQL (hstmt);

  sz_Buffer is the content of the XML file.

  Cake of KR

• "search query: = services the remote procedure call failed and did not run".

  My computer crashed two days ago and I'm finally home, but whenever I try to open a window of any folder I keep refusing. In particular the main computer folder. One of the error messages I got is the following:

  search query: = services the remote procedure call failed and did not run

  Followed by this one:

  The remote procedure call failed and did not execute.

  I opened the Task Manager and tried to access the services from there, but whenever I do, the Task Manager window freezes.

  How can I fix it, my computer is so slow running and does hardly anything and guard with all freezing orders that I try.

  Hello

  This error generally, if the system is infected with Virus and malware or system files are corrupt.

  Please, try the methods below and check if the problem persists.

  SFC scanner.

  You can read the following Microsoft article to repair corrupted using SFC tool files. Use the System File Checker tool to repair missing or corrupted system files

  Reference: http://support.Microsoft.com/kb/929833/en-us

  If the problem persists, try a run Microsoft Safety Scanner.

  http://definitionupdates.Microsoft.com/download/definitionupdates/safetyscanner/amd64/msert.exe

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Do try the suggestions above and let us know the results.

• Call the stored procedure, and bind parameters by name

  Hello

  I use the Oracle ODBC 12 c driver to pass values from one Interface to our database Oracle 11.2. The Interface software collects data from modbus protocoll and calls a stored procedure. Right now my syntax to call the stored procedure looks like this:

  CALL procedure-name ('STRING', 'Timestamp as String', numValue1);

  It works very well. Now, I have to add a default setting to my procedure. To stay flexible to make other changes, I want to call the procedure and bind the parameters by name. Release 10.2.0.1.0 ISC ODBC Notes:

  Added support for the named parameter, binding the parameters by name. ODBC Oracle driver now allows the application to specify the parameters of a stored procedure by name, in the procedure call. Named parameters are to be used in calls to stored procedures and should not be used in other SQL statements.

  So, it shouldn't be a problem to use named notation, but how do I do this in ODBC? I tried like this, but oracle returns an ora-00936 error of missing expression:

  call procedure-name (paramName1 = > 'STRING',= paramName2 > 'Timestamp as String',paramName3 = > numValue1).

  
  

  Thank you for your help.

  Finally, I was able to find the error. The syntax of the statement was very good. The problem was caused by another declaration that I edited before and the error has not attracted Attention immediately.

  Thanks for reading and looking for an answer.

• How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Hello

  How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Thank you

  Jay.

  Hi if your task is running an informatica mapping you can set your DAC task to run the full mapping for incremental and full loads, so tab task just point to the mapping.

  Hope that helps.

  Thank you

• Execution of the stored procedure Oracle EF6 error.

  Hello

  Need help with the oracle error

  {"ORA-06550: line 1, column 8:"}

  PLS-00306: wrong number or types of arguments in the call to "sp_name".

  ORA-06550: line 1, column 8:

  {"PL/SQL: statement ignored '}

  This error occurs when the code runs the line in Vb.net application in Model Designer

  MyBase.ExecuteFunction ("sp_name" para1, para2, para3, dOBpara4, para5)

  I create the SSDL and CSDL, MSL files for oracle to MS SQL connection by the method mentioned in the link JasonShort - professional profile - CodeProject it worked perfectly fine without the stored procedures. I managed to insert, update, and delete records. Then, I created stored procedures for Insert, Update, Delete. It worked fine with MS SQL. I copied and updated oracle files respectively. I gives me the error mentioned above.

  I executed stored procedures in Oracle SQL Developer, and it works without error. But when it is executed via the model there is light of the error. Can anyone let me know the solution for this error. I'm using VS2010, EF6, Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  Thank you

  Prachin Soparkar

  Hello

  Sorry for the inconvenience. After I posted this question I took a break and saw that the error was nothing, but I had given FNAME as parameter name in MS SQL. In oracle when I created the sp I created the parameter with p_FNAME. Where the schema defined in the language SSDL and CSDL, MSL had to be changed to MS, but since I want to that it would be same in different databases, I choose to have changed it in oracle stored procedure. The error msg is confusing, it should be something not found parameter or incompatibility etc.

  Thank you

  Prachin Soparkar

• Fall in the stored procedure option

  Hi Expert,

  I created the option in one of my stored procedure for testing purposes and now I am trying to drop the option and let the stored procedure, anyone know how I can do? Thank you!

  If what you want is to eliminate the Option that you have created in your Proc, you only need to:

  Expand the sign + to the left of you proc;

  Select the option that you want to remove;

  Press DELETE, or right-click and delete:

  

  I hope this can help you!