Similar Questions

• PowerConnect 2824: Can't access web management using VLAN TAG 1?

  Let's say I have port 20, which is a member with LABEL of VLAN 1, 10 and 20.

  If I try to access web management to help interface VLAN 1 TAG, it is not accessible.  However, if I remove the tag VLAN (and the default PVID value of 1), then it works fine.

  Is this a known limit?

  In addition, change the management VLAN on my 2824?  (what I read, it is not possible)

  You're right about the two statements.  The Web GUI is accessible only through the untagged VLAN 1 and it is not possible to change the management VLAN on the 2800 Series switches.  On the other upper level switches, you can use the ip address command vlan xx to move the management VLAN in the VLAN specified in the statement.

  I hope this helps.

• Win 7 64 bit: cannot access Web sites randomly

  I had this problem for a long time, with several computers and various installations of windows.

  After my computer has been for a few days, I'll suddenly find me unable to access all the web pages. Programs like MIRC, Skype and steam work perfectly, like online games. I just get a generic "unable to connect to the server" error when you try to access Web sites and I cannot ping all websites such as google.com (it instantly timeouts).

  Do ipconfig/release, / flushdns and / renew fixes it for a few minutes before I lose the ability to access the Web sites again.

  Disabling/renewal of the NIC does nothing and troubleshooting of windows doesn't find anything wrong.

  The only semi-permanent solution I found is to restart my computer, but the problem will occur again in a few days.

  Servers using openDNS makes no difference. Nor is switching between ethernet cable and wireless. This problem is not dependent on the browser. Reboot the router it corrects only for a few minutes until I became unable to use websites to access again.

  Does anyone know what the cause of the problem and how to fix it permanently?

  Hello.

  I suggest you to configure the TCP/IP settings and check if it works:

  http://support.Microsoft.com/kb/2779064/en-us

  If the problem persists, I suggest you consult the website of the manufacturer of the laptop computer to download and install the latest network driver and check the results.

  Please let us know if the problem still persists.

• Access Web Service via POST - missing parameter

  I'm trying to access web services using the Http Post method, but I'm System.InvalidOperationExeption: missing parameter: ID

  error.

  I can access the Web service using HTTP GET, which shows that there is nothing wrong with the Web Service itself successfully.

  Here is the code I am trying

  String retVal = "";      try       {
  
            String data = "id='25'"; // parameter of the method           URLEncodedPostData encodedData = new URLEncodedPostData(null,false);          encodedData.append("content", data);
  
            byte[] postData = encodedData.getBytes();
  
            HttpConnection connection = (HttpConnection)Connector.open("http://localhost/Service1.asmx/TestService1");            connection.setRequestMethod("POST");          connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded");           connection.setRequestProperty("Content-Length", Integer.toString(postData.length));
  
            OutputStream requestOutput = connection.openOutputStream();           requestOutput.write(postData);            requestOutput.close();
  
            int responseCode = connection.getResponseCode();
  
            String contentType = connection.getHeaderField("Connect-type");           ByteArrayOutputStream baos = new ByteArrayOutputStream();                     InputStream responseData = connection.openInputStream();          byte[] buffer = new byte[1000];           int bytesRead = responseData.read(buffer);                     while(bytesRead >0)            {             baos.write(buffer,0,bytesRead);               bytesRead = responseData.read(buffer);            }         baos.close();         connection.close();           return baos.toString();
  
        }     catch (IOException e)         {         return "ERROR: " + e.getMessage();        }
  

  The line in the "BOLD" throws an exception. HTTP response code I get from server is 500

  Any help would be much appreciated.

  Nitin

  Now, I found the solution.

  The problem was the URLEncodedPostData. If I use just string.getbyte (), it works.

• BlackBerry Smartphones cannot access web pages

  After accessing web pages without problem, I couldn't suddenly to. When I go to the browser, after you type in a web page, I get the consignment: "this is a problem when trying to render the page.

  I searched on the site Web of Blackberry for a solution without joy.

  If anyone has had a similar problem or could advise me what is going on, I would appreciate it.

  Thank you very much

  Gordon

  You are welcome

  Please solve the thread. Put brand of 'Solution' to the post with the solution.

  Thank you.

• Attempts to access web site frequently and get the error 80004500.

  Attempts to access web site frequently and get the 80004500 error?

  Change the title: error 80004500

  Firefox, IE 9 and chrome always errors 80004500

• What role to access web analytics?

  Hi all
  
  I create a new user in HSS and want to learn web analytics by this user. But, I don't know what role I can attribute to access web analytics?
  
  Thanks to you all.
  
  Steven
  
  28/11/2011

  Hi Steven,

  I think that report designer is the role you want to assign to this user.

  Here is a list of all roles: http://docs.oracle.com/cd/E12825_01/epm.111/epm_security/apas04.html

  See you soon,.
  Mehmet

• Access Web WVC54GCA

  I have a WVC54GCA and I try to get web access.   I went through the instructions of setting up TZO, and everything seems OK except one.  I tried to change the camera IP address 192.168.1.200 (according to the installation instructions), but every time I try something else that 192.168.0.115 I can not look at the camera, even on the network.

  Any contributions to this issue would be greatly appreciated.

  Looks like you have 2 different networks, one wired and one wireless router?   Not sure, try to simplify your network, a router and that all connect.  Once everything is on a dish of 192.168.1.X network you can then follow the TZO tutorial to set up the cam.

• Access files outside the web root?

  Hello, everyone.

  Hypothetical scenario.

  I wanted to have a file that would set globally accessible variables to contain passwords, and I want to put this file outside the web root, so that users can not access.

  Logical pathnames of course won't work.  And the cfinclude tag doesn't use physical paths.

  I've never done this before.  What are my options?

  Thank you

  ^_^

  Almost all your CFML files should not be in a directory web-driven!  That those people really are looking for should be accessible web.

  Files must not be accessible to be web - ed or be instantiated as objects, or used as a custom tag.

  FOR EXAMPLE:

  C:\webapps\myapp<= this="" dir="" is="" the="" root="" as="" far="" as="" coldfusion="" is="">

  C:\webapps\myapp\wwwroot<= that="" dir="" is="" the="" webroot="" as="" far="" as="" the="" web="" server="">

  C:\webapps\myapp\includes<= files="" you="">

  C:\webapps\myapp\api<=>

  The only things that should be dir wwwroot files people really browse (index.cfm, etc.) and components such as images, JS and CSS files that must be served to the browser.

  Most of your CFM files must be in a subdirectory of C:\webapps\myapp.

  So index.cfm must be traveled, and it must use the data in secretSecureStuff.cfm which is in understand this respectively.  Then index.cfm is just:

  include "/ myapp/includes/secretSecureStuff.cfm";

  If the file to include is not in the structure of subdirectory myapp for some reason, you can create a mapping in CFAdmin or Application.cfc to point to it, for example:

  /External. => C:\stuff\somewhere\else

  And you référenceriez C:\stuff\somewhere\else\outside.cfm via:

  include "/ external / outside.cfm";

  --

  Adam

• Access Web site external AnyConnect

  Guys, I'm trying to allow AnyConnect VPN client to access external Web sites through the ASA (no split tunneling). In other words, I want users connected via VPN to gain access to the internal network, but also to be able to access external Web sites by having that first tunnel traffic to the ASA and then to the internet. I tried the suggestions mentioned in this thread, but not luck. Specifically, I tried adding this statement of nat:

  NAT (outside) 1 192.168.30.0 255.255.255.0

  as well as this one:

  NAT (outside) 1 192.168.30.0 255.255.255.0 outside

  By I had no statement "nat (outside). Unable to access outside sites in these three cases. I have no trouble to access within the network when connected. I issued the sysopt connection VPN-enabled control to ignore the interface of access for vpn users lists. Config is attached (washed). Any help would be greatly appreciated.

  Change this line: nat (outside) 1 192.168.30.0 255.255.255.0 outside

  To: nat (outside) 1 192.168.30.0 255.255.255.0

  Global 1 interface (outside) will associate the NAT to the external interface.

  Also make sure you have the traffic that is allowed between the hosts connected to the same interface with this command:

  permit same-security-traffic intra-interface

• Latest version of Firefox (version 32) cannot access web sites. Using Windows 8.1 compatibility issues?

  Firefox will automatically update to the latest version which is now the 32 version. I get the following error message: "Firefox can't find the server at us.data.toolbar.yahoo.com"preceded by "Sever not found" what is happening on any site web I'm trying to access. Reload version 31 Firefox works fine, but then it will be updated again.

  Windows 8.1 is my operating system.

  The latest version is 31.0 Firefox as the only way you would be updated to the current Beta build, which is Firefox 32.0b2 (b2 = Beta 2 as you can say six to 12 beta) build is if you were on the beta channel because of you install a beta version and that he continued to use it since. If you have installed the Firefox 31.0 is upgrade to 32.0b2 then the 31.0 you have installed is a Beta version (make sure the name of the file has not had to say 31.0b# because there were nine of betas) and not the Firefox 31.0 release say mozilla.org or https://www.mozilla.org/en-US/firefox/all/

  The typical reason for a new version (Windows) being not not able to connect after a new major version of Firefox update or install is usually due to a software firewall does not block the new .exe but it can stll have the previous version allowed.

  • https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can
  • https://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

• Why can't access Web sites when I copy &amp; paste or type the address in the address window - no answer - but I CAN visit Web sites non - Firefox only?

  I can access websites through bookmarks, most visited, history or if I click on links in Google, etc. If I click on a link directly, it will open. If I copy & paste or type a link into the address window, click Enter or on the arrow "go to" in the address window - no response. I tried several Web sites. This seems to have happened since the 29th of Firefox upgrade. This only happens with Firefox.

  You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

  This might or might not be relevant to your question, but it seems that user.js is currently active in Firefox. The user.js file is present than if you or another software has created this file and normally it wouldn't be here.

  You can delete a possible user.js file and numbered prefs-# .js files and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox. You can get the profile below:

  • Help > troubleshooting information > profile directory > see folder

  or

  • Go to Subject: support , and then click view the folder next to the profile directory.

• Firefox 20.0.1 with Shockwave 11.7.700.169 crashes when you access web pages with video content

  I have a problem with Firefox 20.0.1 on Windows 7 with Shockwave flash 11.7.700.169. When I have access to a web site / web page with content that requires Shockwave (usually video) I can view the video, however, when I get out of Firefox, it will crash with "Firefox has encountered a problem - check for a solution...". ». I also have a website 'MyHeritage' that when I go to a family tree, I repeatedly receive a message "video driver has stopped working - NVIDIA driver... has successfully recovered. If I disable Shockwave, Firefox will not crash in both cases, unfortunately, I can't watch any video content.
  I did go through the website of Adobe and put to day what I thought was my version of Shockwave, unfortunately that Manager for netscape V12.2 installed, I have disabled this plugin.
  BTW - run Firefox in SafeMode (disabled add-on) arrested my NVIDIA driver crashing and also arrested Firefox crashing by exiting the application.

  Please check if all your plugins are up-to-date by using the Mozilla Plugin Check site.

  Once you are there, the site will check if all your plugins have the latest versions.
  If you see in the list of plugins that have a yellow button to update or a red button update now , please put to update these immediately.

  To do this, click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps in the installation process.

• I'm unable to access Web sites on my iPad

  Last night I updated my iPad with iOS 9.  Since then, I was unable to access the Web sites via Safari.  It gets stuck on the Google page. I turned the iPad and died in new...

  I have the same problem EDT. I thought I did something and I can't understand.

• Increasing problems to access web pages in Safari or Chrome

  Hello. I have a Mac Mini 2.5 GHz, 4 GB RAM, 500 GB HD; running Mac OS x 10.11.2; Safari 9.0.2; Sophos AntiVirus Home Edition 9.4.1; Chrome 49.0.2593.0 dev (64-bit).

  Several months ago, I started to have problems of access to some web sites, namely OpinionWorld and your voice. I would get an email from them with a link, like http://dkr1.ssisurveys.com/projects/start?psid=s_LXqAJmxx3JVOk_yTSTvgBEHjCAUQLr>, and when I went to access I got error:

  400 bad request

  Your browser has sent an invalid request.

  so that I could access these sites from my mother did investigations using his computer and Windows 10 machine. I had the same problems in Safari or if I pasted the links in Chrome. After some time I also started having problems with other websites such as Amnesty International. I would like to click on a link such as al http://www.amnesty.org.au/action/action/41035/?utm_source=FBPAGE&utm_medium=soci & utm_content = 20151220043000 & utm_campai... > and he'd make the same error 400 Bad request. I took it to the Genius Bar for an appointment and after a long period it check and tries to connect to some of these sites from another Mac and my mom on my Mac Mini account, that the Apple employee said it was a problem with sites and not with my computer, but problems encounter on the other computer and even on my mother's account were different. On the other machine, it seemed that someone else had bought the areas OpinionWorld and your voice and I forgot what happened account of my mom, but it wasn't a 400 error. Also, it didn't explain why I was able to access it on a Windows 10 using Chrome for Windows machine. Also, it was just the links OpinionWorld and your voice, not links to Amnesty International etc.

  Sometimes, I would have similar problems with other sites. Sometimes I could open in Chrome but not Safari, or if I clicked on the link it won't work but if I pasted the link and press return it would work. More recently, I was not able to access the site with Safari iTunes feedback feedback/itunesapp.html >, he just said:

  Bad request

  Your browser has requested that this server could not understand.

  Reference #7.ebb7d117.1450593610.0

  I receive for several sites these last time. Also although when I accessed this site through Chrome, it worked, when I had finished my comments he tried to go to http://www.apple.com/feedback/itunesapp_thankyou.html> where he got another 400 error but when I went there now it worked.

  Also when I tried to access the first link in this post just recently I received:

  403 Forbidden

  Request prohibited by law.

  in Safari. Previously I would have uninstalled and re-installed Safari and Chrome, but apparently it is like an option with Safari.

  Can anyone suggest what should I do then? Thank you for your consideration.

  Can anyone suggest what should I do then?

  He doesn't know what is the problem but "Sophos" is capable of anything beneficial and his presence will only complicate troubleshooting. Remove it. Back up your Mac before making changes to its file system.

  Use the Remove Sophos Anti-virus program. It will be installed in the Applications folder on your Mac, unless you have moved or deleted. In this case, follow the instructions in uninstalling here: https://www.sophos.com/support/knowledgebase/122710.aspx. Ensure that its eradication is complete and irrevocable from your system. Do not reinstall, or something like that. Only then will you be able to solve the problems you are having.