Acer asl3600 will not start only get option is F12 and no data on the recovery drive.

Similar Questions

• C satellite will not start - only toshiba logo appears

  My laptop is only 1 week and will not start.
  All I get is the toshiba logo and the screen becomes a pale bluish color.

  Any ideas?

  What is your laptop model?

  You are able to access the BIOS?
  Turn on the unit button and press F2 to enter the BIOS.
  The BIOS screen is visible?

  Another idea: the laptop turns on, press the F12 key.
  Usually, you should see a start menu. Here choose the last option called HARD drive recovery.
  This option allows you to recover the computer laptop back to factory settings.

• My ACER laptop will not start Vista

  My acer laptop does not start correctly. It loads after windows bar loads and then it stops quickly. the pointer will appear on the screen and when it is left idle, screensaver maker runs. the same thing happens when I try to start in safe mode. What should I do? any help much appreciated.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to reinstall Vista on an Acer:

  "With the help of the outside Windows Recovery Management"

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• Satellite A105-S4164 - will not start only white screen

  Hi all
  I have a laptop Toshiba Satellite A105-S4164 that will not start.

  I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
  All I see is a white screen.

  My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.

  Thank you for your comments.

  Seyed

  You can see an image on an external monitor?

  Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• I installed the software recommended by Microsoft and my printer is not working as it says lxdncoms.exe and lxdrwbgw.exe of the printer driver have been blocked. What should I do?

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:

  The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  What exactly is the software that you have installed?

  Ken Blake, Microsoft MVP

  The software is called RegWork.  I had to pay for it.  It is not yet enabled.  It seems to be just a type of utility to clean my system scan.  Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
  Should I continue to carry out this activation or should I unstall it.

  What makes you think that Microsoft Security Essentials recommended
  It? That cannot be good.

  You must uninstall it. Registry cleaning programs are all snake
  oil. The registry cleaning is not necessary and dangerous. Leave the
  Only registry and do not use any registry cleaner. Despite what a lot
  people think, and try to which suppliers of software record cleaning
  convince you to have used really doesn't hurt registry entries
  you.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.
  Ken Blake, Microsoft MVP

• Windows 7 will not start, only to get bluescreen

  Hello I have a problem

  I have Windows 7 64 bit

  For a game that I had to change my processor to a limit so that the game have graphic problems, I changed and restarted my computer after I had to options if I chose the option to start windows normally it loads for a while as always the blue screen of death apears and my computer restarts if I chose leaves windows problems. He is trying to fix them but without success and my computer restarts again.

  I think the problem is that my computer now has not enough memory RAM at startup because he needs 2 GB. I thought I could start it in safe mode, but I don't know how to do it. BIOS doesn't help much.

  Anyone know a soloution?

  Hello

  > I thought I could start it in safe mode, but I don't know how to do
  You can start Windows in safe mode if you press the F8 key before Windows starts. Then, you see the Windows Advanced Boot menu and select Safe mode.

  By the way: what laptop you have and that you use the version preinstalled Windows from Toshiba?

• Start Windows xp will not start up - "error detected in antivirius" and told me to uninstall but I cant because I can not enter and I have no boot disk

  I start the pc, I need to start windows automatically, I don't what, whether it keeps restart and goes back to the windows splash screen, I have no boot disk for... that it runs xp it says there is a corruption in the antivirius and I half to remove in order to run the xp program but how do you do if I can not enter the pc...

  Hello

  ·          When the issue started?

  ·          Were there any changes made to your computer before this problem?

  Step 1: Start the computer in safe mode and check if you are able to uninstall.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Note: All programs do not give the option Uninstall in safe mode.

• Windows Update will not update. Get codes 641, 80070641 and 8004FF01. Fix on Microsoft won't fix it. He said that the Windows Installer is not installed correctly. How can I solve this problem?

  Since May 8, 2012, I have not been able to get updates of thje automatically updated.  It worked fine before the 8th.  I open Windows update and click the update and I have 3 different errors.  The error codes are 641, 80070641 and 804FF01.  I downloaded several times the Microsoft Fix It and it fixed 1 thing ad so I ran it again and he said "No problems need Attention."  But he is not always up to date.  I have 18 important updates and they all failed.  Difficulty he installation of Microsoft Center, I had "an unexpected error has occurred.  Setup cannot continue.  Close, and then try again.  Error: installation of window Service could not be accessed.  This can happen if Windows install is not properly installed.  Contact your support staff. »

  What can I do to fix this problem and make the update of Windows to operate?

  Gwen,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-will-not-work-getting-errors-641/dfd4c17e-72c6-47F5-b3fa-6ab64803bbc0>

  UTC/GMT is 23:02 Sunday, July 22, 2012

• Windows XP will not start only the fans turn on.

  On one morning and crashed. Light around the power button flashes as standby. Only way to closing was to unplug the power to the unit. It is AMD 6400 w/XP Pro x 86. Have straightened him with restoring & installed windows updates. Then began a loop. Uninstalled updates & BONES seemed to work OK. Next day morning tried to start & one thing turns on fans. Time for new computer?

  Hello Gary_57,

  If the only thing coming in right now is fans - no BIOS or other splash screens, then it would be time to contact the manufacturer.

  The monitor detects a signal?

  Do we have here no beeps when you turn it on?

  What happens if we the power button for 10 seconds and then try to start it again?

  Best regards

  Matthew_Ha

• Satellite Pro L300 will not start - cannot get into the BIOS

  Dear,

  I got a satellite Pro L300, width a HARD drive partitioned, with Win XP installed C and D with Windows 7 installed, the problem is the following:

  Days when I turned on my laptop, the OS splash screen appears, stop boot on Toshiba logo process.
  In addition, I can't enter the BIOS with the F2 key or the Boot Manager by using the F12 key.

  Help, please.

  > stop boot on Toshiba logo process
  This means that the laptop can not pass the POST (power on self test) properly and it would mean that a hardware problem has been detected on the motherboard.

  Remove one of the modules RAM (check both) and try to turn on using a single module of RAM.
  It is possible that one of the RAM modules is defective

  It would also be possible that the motherboard is malfunctioning, as you can see, it is hard to say what role could be wrong, but what looks like a serious hardware failure

• Creative cloud will not start. Get errocode 1

  Creative cloud try to upgrade. After 2%, I get the error code 1. Failed to contact server.

  Hi Svein,.

  Please check the help below document:

  Error: "unable to install". Creative cloud office

  Kind regards

  Sheena

• Windows Vista 64-bit with readers that will not start after disabling all startup applications and registry changes

  My Vista 64-bit system ran like a dream - until I tried to install Roxio Creator 2010.  When the installation failed and hung up, I stopped the installation with the Task Manager and rebooted the pc.  Following the instructions of blog users of Roxio, I did the following:

  1. selected disable all startup using MSCONFIG and restarted the pc applications.

  2 download and run the Microsoft Windows Installer CleanUp.

  3 remove the partially installed Roxio files in the directory c:\Program Files x 86, then made an export of registry before editing the registry.

  4. under the leadership of the registry - deleted file folder HKEY_CURRENT_USER Software Roxio and has attempted to delete the Wow6432Node folder from the HKEY_LOCAL_MACHINE folder but encountered an error - didn't note it, unfortunately, but basically he said that he could not remove it when it has been changed, after waiting a while I tried to delete the folder Wow6432Node whe even once with the same answer, so I closed Regedit and restarted the pc.

  The pc goes through the process of startup and hangs when it tries to start Windows Vista.

  5. I can't do a repair with the Vista disk - files are not present.

  Hello Ajay K.

  Thank you very much for your detailed answer.

  I got no error message.  I backed up the registry, but was not able to start the pc, so was not able to restore the registry.

  I couldn't restore last good configuration known - the option was not yet present.

  When I tried to restore the operating system, he asked drivers before it would proceed.

  I have a floppy 1.44 with the raid drivers and after reloading of these drivers, I was able to reload Vista Ultimate.  Fortunately, all my data was recorded in a windows.old directory, and I'm back in business without losses.  Just had to reload all my software.  Do that...

  I think that my problem was caused by disabling all startup applications in msconfig - which resulted in my hard not recognized disk array.  This seems likely.

  You are awesome to provide an exceptional response.

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• Illustrator for Mac trial CC will not start

  I downloaded and installed the trial version of the CC for Mac Illustrator. When I try to launch it. the icon flashes for a few seconds, then disappears. The application will not start.

  Install fonts Verdana and Tahoma from Microsoft.

  Mylenium

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.