Acer Aspire 5560 Dolby Advanced Audio driver issues after updating to Windows 10

Similar Questions

• HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

  After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

  In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

  Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

  Any ideas? HDMI port connected to the Intel High Definition Audio device?

  The device for the device ID Intel HD Audio are:

  INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
  INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

  Thank you

  Ed ski

  Hello:

  Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

  I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

  Download and install this free utility for files.  The file 2nd on the list is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

  This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

  After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

  Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

  When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should be able to get audio and video from the HDMI connection.

• (Lenovo G505) Dolby Advanced Audio driver and Windows 10

  I just install Windows 10 to my laptop (G505) and continue to receive an error message about the Dolby Advanced Audio driver. There are several other similar subjects, but I can't see an entry that helps me with my model. Y at - there any action I can take to make a repair?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  
  

• Dolby advanced audio driver

  Pavilion dv6-6115tx

  Windows 7, 32-bit,

  need a link dolby advanced audio driver download... Please...

  Hello

  This software is included in the IDT Audio package on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55094.exe

  Kind regards

  DP - K

• Dolby Advanced Audio Driver does not

  Hello, I have recently updated all my drivers on my computer that could be updated. (I have Windows 8), but now every time I turn on my computer it says

  The current version of the Dolby audio driver is 7.2.8000.17 and the software application expects that the version of the driver 7.2.7000.7. Please install a valid application of driver and software combination.

  Since this has happened, I can't watch videos in Windows Media Player and I can not play some full screen. Also when I go on Youtube, I have to wait 10 seconds before I can watch a video. My computer is an Acer Aspire 5560-8431. If you guys can help, that would be great, considering that this new driver is a pain.

  So should I remove Dolby Advanced Audio?

  You are using an operating system apparently does not support your computer manufacturer.  Your choices (as I see them) are:

  • Understand the exact brand & model of audio device you have in the machine and go directly to support manufacturer - you might get lucky and they support this component of your entire system.
  • Back to a supported operating system (it came with Windows 7 apparently) and who should run because the system was designed around him.
  • Do you think all that is right and makes things work the way you want.

  "Deletes" the "Dolby Advanced Audio" the right choice?  I don't think so - it will probably break something else.  But it might be for you - he might just silence the message and who can be your main concern.
   
  When you improved (I guess that's what you were doing) this system to Windows 8, did you use the Acer provided and suggests how?
  http://www.Acer.ca/AC/en/CA/content/Windows8-upgrade
  -->
  http://www.Acer.ca/AC/en/CA/content/upgrade-Assistant-tool
  or
  http://www.Acer.ca/AC/en/CA/content/manually-upgrade
   
  Either your system * equipped * Windows 8?  Once again-, we could have a failure in communications here.  When I visit the page drivers for the Acer Aspire 5560 15 "laptop - you can have something together."  What I see shows that the system is little close only supported by Acer with Windows 7 64 bit.

• Dolby advanced audio driver for hp pavilion 2244sa g6

  Hello I need a driver for speakers Altec Lansing with Dolby Advanced Audio, win7 64-bit. Hp pavilion 2244sa g6 model. . Can you help me with a link or something. TNX a lot

  Hello

  Try the IDT HD Audio driver from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56460.exe

  Kind regards

  DP - K

• Dolby advanced audio driver for pavalion g6 2230tx

  my laptop sounds very that the usual.the speaker volume is reduced.i learned about setting dolby on Control Panel is missing.so pl tell me what to do

  I m using hp pavalion g6 2230tx

  Windows 7 64 - bit

  I need driver of dolby...

  Hello

  Open windows control panel, open Device Manager and expand sound, video and game controllers.  Right click on the IDT device and select Properties.  Select the driver tab and click on "restore disc".

  When finished, restart the laptop.

  You now audio?

  Kind regards

  DP - K

• J9L60PA: No Audio beats available after update of WINDOWS 10

  No handler found when audio beats or app I've upgraded to Windows 10... rather have download realtek hd audio that offers bad sound... my laptop comes with beats audio speakers... where should I get my beats back audio Panel... Please help

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP laptop and your Beats Audio does not work properly after upgrading to Windows 10. Here is a link to help solve the speakers and sound does not work correctly.

  The link by using the Windows troubleshooting tool is the best for this situation.

  You can also try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default Format menu drop-down of the highest quality 192000 Hz.
  7. click on apply. Reboot the laptop.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  If that's not enough to uninstall the Realtek HD Audio and other that are listed in Device Manager, click the arrow next to its video and controller to expand this category games
  Click on it Audio IDT high definition (HD), and then select Update driver software.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver.
  Once the installation is complete, restart your laptop.

  I hope this helps.

  Thank you.

• HP envy 15 notebook PC: Beats audio not available after update of windows 10

  Hi, I would like to know the characteristic audio Beats that isn't on my laptop anymore, after I've updated for Windows 10 he disappeared and now the audio on the laptop is not the same of course. The quality is worse.

  How can I get it back?

  Thank you

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• HP Pavilion dv7-6163: audio Beats went after update to windows 10

  I've updated to Windows 10 and the Beats Audio that I had on my computer has completely disappeared. Now my speakers audio seems very low and has absolutely no low range. As an audiophile, this sounds like total garbage and I want Beats Audio back!

  When I got hp forums said to check the section software and drivers website. When I found my specific computer model, the page said "this portlet unavailable." I don't know what to do or where to find the drivers for my computer model. If I'm screwed? Is there anyone out there with the same computer model than me who has Beats Audio for Windows 10 driver? I feel like I'm grabbing at straws here.

  Hello:

  See if installing this driver solves the problem.  Restart the PC after the installation of the driver.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Problems with Acer Aspire VN7 - 591G. Not enough memory to update to windows 10

  Hi, I have trouble upgrading to Windows 10. End of 2015 Aspire VN7 591G.

  My C drive seems to be complete, but I only have Windows 8.1 saved in this folder. Try to upgrade to Windows 10 hours (connection terrible broadband) before finally quitting and the message "not enough space on the destination drive. I am totally confused and frustrated - C drive has only 8.33 GB free of 44.7 GB. I have just installed Windows 8.1, I deleted all the bloatware and other programs/applications irrational yet it seems fair to decrease on a daily basis. I already had to do a clean install, as drive C became complete.

  All the solutions in terms of 'dummy' simple? Thank you

  First of all, do not forget to create recovery media, then you can always go back to stock windows OS installation.

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/26286/~/create-a-Acer-factory-default-backup-in...

  Since you have a slow connection, I suggest that allows you to create a bootable media using download from microsoft also, so you don't need to download windows 10 update each time.

  read here:

  http://community.Acer.com/T5/knowledge-base/Windows-10-installation-recovery-media-creation-and-use/...

  a 8 GB USB flash drive is necessary

  I suggest you do a cleaning of the HARD drive too, probably, you have files of windows upgrade spare failed 10:

  Windows logo key
  type
  Disk Cleanup
  Click Disk Cleanup
  Click on clean up system files
  Let scanner
  then check the files you want to delete, it is safe to do so
  in the end, press ok and let it wipe the HARD drive for you

  After disk cleanup, check to see if the 10 windows temporary folders are still there:

  http://www.thewindowsclub.com/delete-Windows-BT-WS-folders-Windows-10

• C:\ drive locked after update of Windows 8

  Earlier this morning I went to turn on my computer (Custom built Asus with Windows 8. Pro 64 - bit), I was greeted with the BSOD saying "a problem occurred" without any technical information. After a while he started finally to the "Boot Menu" he wouldn't let me refresh or reset the PC saying that the 'hard drive has been locked', most of the other startup options will not work. So I took out the hard drive and attached to my laptop (I have a SATA USB cable). He said I need to format the hard drive before accessing the drive, also "disk management", says the Partition type was 'RAW '. I didn't lose my data, so after a little more research, I put in a disc of Windows 7 and selected "Repair PC" and let it solve the problem. He said something like "repair hard disk. I let it run for a few hours, when it was done I took the drive and restarted my computer. It started normally with the windows logo 8 but when that ends, he goes to a black screen. I went to the "Boot Menu" but now he allowed me to update my computer. So, I updated my computer. This is where my current problem started. Once the update the computer restarted, he gave me a choice of two operating systems to open two of them saying "disk 1 of Windows 8. I chose the other and he went to the login to my profile screen. I logged in and it started the first time boot screen. After he 'Got things ready' it opens the start menu, that had "Desktop" "Windows Store" "Internet Explorer" and "Skype" (Skype was no logo just the name and a small cross in the corner). I went to the office (where I got what looked like safe mode), which has a black background with the model number of widows 8 in the corner and the only shortcuts to my steam game that were on my other hard drive (which was already disconnected) and a shortcut called 'Deleted Applications' Internet from there , I went to my computer and tried to access the C:\ drive when I try to open it says something like "can't access C:\. "I took the car back out and plugged into my laptop where I get the same message. That's where my expertise ends. A great help.

  Thanks for the help-

  Sky Hawk Bressette

  Hello

  Try these methods and check if that helps:

  Method 1:

  Try to enable the built-in Administrator account and check if it helps.

  Enable and disable the built-in Administrator account

  http://TechNet.Microsoft.com/en-us/library/hh825104.aspx

  Method 2: Check if you can take possession of the drive in safe mode. Try the following steps:

  1) start from the Windows 8 DVD
  2) click Next
  (3) select repair your computer

  (4) select troubleshooting
  (5) select Advanced Options
  (6) select command prompt

  (7) type - Bcdedit/set {bootmgr} displaybootmenu Yes (note the spaces)
  (8) type - out

  (9) restart

  (10) to the start screen, select F8
  (11) to select Safe mode with networking

  This can then be turned off when you are finished.

  (1) run by the lower left corner (Admin) command prompt right-click when Start appears.

  (2) type - Bcdedit/set {bootmgr} displaybootmenu not (note the spaces)
  (3) type - out

  Method 3: If the problem persists, follow these steps:

  1. start your drive of Windows 8

  2. do not click on 'Install now', click on repair your computer

  3. click on Advanced Options

  4. click on more Options

  5. click on diagnose my PC

  6 wait for the restart of your computer

  Check if your computer has now unlocked a HDD. I hope this helps.

• Spectrum of HP x 360: new spectrum x 360-"no audio devices available" after update of windows 10

  Brand new, was working fine, all wonderful - up to what windows update yesterday, and now the mute button is always enabled in laptop mode or tablet, unless the HDMI is plugged in, and then the sound goes out via HDMI. Because there was a big update W10 from one day to the next, it's suspicious.

  Try to change the taskbar icon reports: peripheral output Audio n is installed.

  The button muting of the keyboard is light, and the sound of the taskbar icon is crossed out (= Mute).

  Panel / control device manager / audio-> "No. Audio Device is installed":

  Panel / control device manager / sound, video and game controllers:

  ISST Conexant Audio

  Intel(r) Audio display

  I see a lot of similar complaints year last for HP laptops ("Mute Button stuck"); some seem to be hardware related, so I can't know if the Windows update broke it, or if it's just a coincidence.

  I had the same problem, and it is related to the update of the anniversary.

  See this thread...

  http://h30434.www3.HP.com/T5/notebook-audio/no-audio-after-Windows-Update/m-p/5724496/highlight/false#M77129

• Dolby advanced audio drivre

  I need dolby advanced audio driver for HP Pavilion g6-2321ee Window 7 64 bit

  Hi Mido112k,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6 - 2321ee Notebook and who need the Audio drivers. Here is a link to Idriver Audio DT high definition (HD).

  Unfortunately, Dolby has not been installed on this computer.

  I hope this helps.

  Thank you.

• I need assistance with my Dolby Advanced Audio

  After that I upgraded my Windows 7 to Windows 8.

  I try to open my Dolby Advanced Audio and something pushes me

  «Cannot find the file .startup!.»

  Can someone help me with this problem?

  Or can someone provide a download link so I can reinstall or repair?

  Hello, Foxseiz.

  I see that you have a problem with the Dolby Advanced Audio.

  I doubt that the upgrade to windows 8 is causing this issue.

  I suggest you go to your C drive > SWsetup > drivers / Audio > click Application (not Matt bit) right-click on setup.exe - > select troubleshoot compatibility

  "Let it run through the process and then a box will appear > select troubleshoot program > then another box appears, you can select the option that says" the program worked in earlier versions of windows but does not install or run now "> then click > select windows 7 > text program."

  Then the installation program appears simply click Yes. After that it is should begin the installation of the original program.

  Let me know if other problems come out during this process.

  If you have any other questions let me know.

  THX