Acer aspire 5733 and drivers windows 8.1

Similar Questions

• have vista on acer aspire 5920 and my windows will not start, I can't and starts to panic

  I hope you can help when I try to correct this go proplem problem event name: startuprepairV2 as well as a list of names, but when I go to start windows normally coming to a blue screen with a code saying

  Technical information: * STOP: 0 x 00000024 (0x86DF3C80, 0XC000102, 0 x 00190444, 0 x 0000000)

  Hello

  Remember to make changes to the computer before the show?

  Stop: 0 x 00000024 usually occurs for the following reasons

  1. the structure of the partition or file system is damaged.

  2. a driver compatibility problem exists.

  You can run CHKDSK from Windows Recovery program and check if it helps.

  Warning: We recommend that you perform a full backup before implementing these steps.

  To run the CHKDSK (Chkdsk.exe) program, follow these steps:

  (a) use the Windows Vista DVD to start the computer from Windows Recovery (WinRE). For more information on how to start the Windows recovery, refer to the Microsoft Web site at the following address:

  http://windowshelp.Microsoft.com/Windows/en-us/help/f768809f-ED90-415f-a83f-89b42108b3551033.mspx (http://windowshelp.microsoft.com/Windows/en-us/Help/f768809f-ed90-415f-a83f-89b42108b3551033.mspx)

  (b) in WinRE, open a command prompt. To do this, follow these steps:

  ·         On the Install Windows screen, select the language to install, time and currency formatand keyboard or input method options and then click Next.

  ·         Click repair your computer.

  ·         Click the Vista installation you want to repair, and then click Next.
  Note Click load drivers only if you need to load a driver to access a hard drive.

  ·         Click command prompt.

  (c) at the command prompt, type the following command and press ENTER:

  CHKDSK: / r

  Note In this command, is the hard disk where you want to install Windows Vista.

  (d) If Chkdsk.exe does not and does not repair errors on the hard disk where you install Windows, run Chkdsk.exe on other NTFS hard drives on the computer. To check the partitions that are configured on the computer, follow these steps:

  • .  At the command prompt, type the following command and press ENTER:

  DiskPart

  • At the DISKPART prompt, type the following command and press ENTER:

  Flight list

  Note the hard disk information that is returned.

  • At the DISKPART prompt, type the following command and press ENTER:

  output

  • At the command prompt, type the following command and press ENTER:

  output

  I hope this helps.

• Acer Aspire 5000 XP to Windows 7, cannot detect the audio drivers

  original title: Acer Aspire 5000 XP to Windows 7

  I recently updated my Acer Aspire in XP to Windows 7 5000. The process went well, but now he says it detects all audio devices. I checked the control panel and go to the sound section and it says that no devices are installed. Also, I am having some problems with graphics (a few black lines appear every now and then). I'd appreciate your help with this. Thank you!

  There are no Windows 7 drivers for your model, something that you should have checked before the upgrade.

  There are Vista drivers on the Acer site which may operate, but don't hold your breath...

  http://support.Acer-euro.com/drivers/notebook/as_5000.html

  If they are not, return your machine back to XP, if you want to keep all the features...

• I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64.

  PROBLEM WITH MY LAPTOP CONFIG AND SYSTEM.

  I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64. It has been preloaded. I am VERY confused!

  When you view this file.

  If you check through the Task Manager > processes (tab) some will note * 32 because they are native 32-bit applications running on a 64-bit operating system.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• downgrade acer aspire 571 - v3 for windows 7

  Hello

  I am trying to downgrade an acer aspire v3 - 571 of windows 7 to windows 8? Anyone know how I can change the boot order to boot from a dvd or usb hd rather than the hard drive?

  See you soon

  Nice day

  1. you press "F2" when you switch on the device.

  2. make sure that you change the secure mode of UEFI in legacy.

  3 disable secure boot.

  4. go to start, press "F6" to take the optical drive to option 1.

  Kind regards

  FReeZA

• Network Connections folder is empty - Acer Aspire 7750 G running Windows 7 Home Premium

  Here's my problem:

  My "Network connections" folder is empty, even though I am connected to the internet.

  Until I started to have problems, my network icon, in right-hand corner slot of the screan, resembled certain lines (which showed how the connection was). Now, it's just a computer screan with some kind of cable. I don't have a red X or a yellow triangle on it.
  Things, I've done so far, but has not worked for me:
  1. I used the command (as admin) "sfc/scannow".
  2. I removed some sort of file in the "regedit".
  3. I tried to use a restore point, but there was no...
  I own an Acer Aspire 7750 G running Windows 7 Home Premium
  I don't know what to do. I really need help!

  Well, I solved the problem myself, but thanks for the help anyway.

  Fortunately, Acer has created what is called "Acer eRecovery. I recommend it to anyone who has this problem, or any other. Basically, this option resets your entire system. Make sure that you back up your important files if, everything you forgot to back up will be gone!
  I'm glad my problem is solved, it was really bothering me for a while.

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.

• I have an acer aspire 3690 and I am trying to restore windows xp to its factory settings how to do that

  I have an acer aspire 3690 I am trying to restore to factory settings and is only let me go back to a certain date all I want on that, that's what org. came on the computer and the internet I do not have any disk

  Page 28 of the manual of your system describes how use the built in Acer eRecovery Management software to restore your system to factory settings.

  Doing so will scan all your personal data and when you did, I think you need to configure your Internet connection again since the factory settings are unlikely to know everything about your current installation of Internet.

  If you experience a problem with your system, I think I would fix rather whatever is the problem, but here's what Acer has to say about it:

  The manual is here:

  http://support.Acer.com/us/en/product/default.aspx?modelId=5

  This article reads as follows:

  Recovery and restore features allow to restore or restore the system
  a factory default image, leave a user created image or previously
  created backups of CD and DVD. You can also reinstall applications and drivers for your Acer system.

  1. press on + or select Acer eRecovery Management of the
  From Empowering Technology toolbar to start Acer eRecovery Management.

  2. position yourself in the restoration and recovery page by selecting the button restore.

  3. Select the point of backup you want to restore from. You can also
  choose to restore the system from a factory, to retrieve a default image
  already created CD/DVD or reinstall applications and drivers.

  4. follow the on-screen instructions to complete the process.

• Acer Aspire TimelineX 3820 t - Windows Update - Synaptics Touch Pad conflict

  Hello

  I just bought an Acer Aspire TimelineX, 3820 T. It's like a Synaptics Touchpad, which works fine until I do a Windows Update. Once I do the update of Windows, the touch pad doesn't work. Even if it works, there is no control over the touchpad. It is an old laptop of the week and I won't send it to Service Center for repair. Also, I'm afraid to get Exchange of the same model, since it is a software problem with Windows update and could be the same thing with another of the same model. I disabled the Windows Update and there is no problem since then. But with the new laptop, I cannot deal with Windows update and will be updated soon.

  Help, please!

  Welcome & thank you for your comments but I said nothing about disabling the automatic update from Windows Update.

  See...

  Understand the automatic Windows Update
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  [Maybe you want to disable the automatic installation of the driver & other option updates or maybe just change the way which THE supply & install updates by my previous answer?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adapter Acer Aspire M1640 Vista drivers 6 to 4 errors

  Hello

  I'm new to the Forum of Acer.

  My friend has an Acer Aspire M1640 running Vista Home Edition. In the Manager of devices under network adapters, there are four errors "all starting with Microsoft 6to4 adapt." The NVIDIA card works very well and can get internet. I followed the instructions elsewhere on the internet and uninstalled the Microsoft 6to4 (error code 31) card and then re-installed the component inheritance. The alert has disappeared. So I tried to remove other 6to4 errors that were... #15, #18 and card 6to4 #5 6to4 adapter 6to4 card. When I rebooted the computer, all four were present once again with errors. I tried to update the drivers for all, but I was told that they were already up to date. I tried the system restore because she had removed a bunch of stuff before calling me but the system restore points do not go far enough to fix what she was doing. The computer is very slow start and freezes from time to time. Any suggestions?

  Hello!

  I uninstalled the network cards and I ran the utility of the seller and found nothing on the manufacturer of the wireless adapter. Then... I just reinstalled the NVIDIA LAN adapter that you provided and restarted the computer and found that the adapter 6to4 errors disappeared. My friend does not use wirless internet anyway.

  The computer always starts very slowly.

  I ran a scan disk to check the material difficulties and he fixed one error. But it always starts very slowly. Whether in safe mode or not.

  Something I noticed while working on his computer is there are three different 'control' programs on his computer. Realtek, ATI and NVIDIA. They are likely a problem or conflict?

  I'm not very tech savvy, but I try LOL

  Thank you for your patience and your help

• Acer aspire 3100, all drivers download help me

  I have an acer net help find drivers to download aspire 3100 viste I put win 7 on it and do not have all the drivers help me

  Hello

  http://support.Acer.com/us/en/product/default.aspx

• HP Pavilion 15 r203 tx: 10 pixelerated and drivers windows

  I'm so desperate.i have a lot of work that needs to be done in my laptop... Now, I can't do it all. I can't find any link for the drivers on windows 10. Can someone give me it please. VGA, sound, wifi, emi, city, all the drivers one by one the link... I want all of them link by link. Note that I am not a geek or a pro
  Please help me quickly you can
  Model hp Pavilion 15 r203 tx
  10 Windows pro 64 bit

  Hello

  I'm upgrading to Windows 10 for my portable 5th now. For the first 4 phones, 2 are round 5 and 10 Windows can automatically update all the drivers, the correct drivers. You can check updates at the beginning of the upgrade of Windows 10? Please run Windows Update 10 now, this will help.

  Kind regards.

• I could not find my model of laptop. I need help to download the utilities and drivers windows 7

  My laptop

  Name of product: notebook PC HP Pavilion g6

  Product number: B1N54EA #ABV

  Can someone please tell me my notebooks model number or a link to the page to download the drivers for my laptop?

  Hello

  The model of your laptop is (you can see B1N54EA is the number of the product):

  http://support.HP.com/us-en/document/c03263476

  and drivers page:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5251336

  Kind regards.

• used ACER Aspire 5100 which has windows vista Home premium with service pack 2. It has technology MOBILE AMD Turion 64 x 2 usb ports doesn't work don't, webcam and CD/DVD drive now does not.

  I bought the laptop to a pawn shop and waiting for a few minor problems, but not this one.

  It began with the webcam doesn't work does not correctly, but works. After Device Manager running that it has detected a Xerox Pro scanner, not built in webcam which i see in front of me. I tried everything with no success, but this isn't the only problem there is... more

  After I realized that the cam is not working, all 3 USB ports leaving recognize anything and all the devices connected by a mouse flexible wireless microphone on a memory stick 4 GB, could not be recognized. All were then tested in two other PC with these things being recognized and installed on the PC.

  I have updated after him saying driver not installed, only to be told driver is already up-to-date, but will still not be recognized.

  Now the CD/DVD does not work and is not even detected in scan. says the drivers are not present or that is disconnected. I did nothing else than to go in circles are doing the same thing over and over again.

  Is there a worm or bug or something wrong freeking I know and how do I solve this problem?

  I like most of the features of vista, but if it's the doo doo a bit I have to put up with... I want XP less back pain...

  Once again can not locate or install programs or drivers to operate the integrated webcam

  All USB ports defective 3 and CD/DVD is no longer functional or even detected in laptop... HELP ME PLEASE

  Hi Laurent,.

  1. did uninstall you the USB ports on the Device Manager and reinstalled as mentioned in the previous post?

  Please see the following thread link:

  my USB say this device not yet recognized the worsks device in the other laptop why?

  Uninstall all USB device manager entries and check.

  a. Click Start and typedevmgmt.msc and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  2. have you tried to uninstall the webcam?

  If this is not the case, try to uninstall the webcam in Device Manager and install the latest version of the drivers from the following Acer site.

  Acer Driver Downloads

  On the problem of DVD player, you can try the steps in the following article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.