ACER V3 - 571G - ACER Support site - NVIDIA GT 730 M drivers DO NOT WORK!
Dear ACER,
As a proud owner of a V3 ACER - 571G, I am very disappointed with the support page for this model.
I reformatted the laptop with my own copy of Windows 8 and now the NVIDIA GT 730 M drivers in your support page can be installed. The continuous NVIDIA Installer give the message:
X NVIDIA Setup cannot continue
This graphics driver could not find compatible graphics hardware.
I tried to download the two drivers for NVIDIA display of your upgrade of Windows 8 and Windows 8 sections and they not WORK!
Can you please update and replace the display NVIDIA ASAP?
Sincerely,
Joe
Dear ACER,
I found the solution to my conundrum. The drivers pages of upgrade of Windows 8, Windows 8 and are confirmed will not work with Windows 8.
I found the drivers for Windows 7 64 - bit NVIDIA WORK!, namely: VGA VGA, NVIDIA, DRIVER, 8.17.12.9632, Mo 330,0 dated 25/01/2013.
Who would have thought to try the Windows 7 driver for a driver to Windows 8?
Thanks ACER allowing me to search for a driver in the most obscure places.
Sincerely,
Joe
Tags: Acer
Similar Questions
-
Pushed back with Nvidia GeForce 9600GT 512 MB does not work?
Hey... I have a problem with regrowth in Adobe Photoshop CS5 Extended...
The 'Regrowth' in 3D in Photoshop tab is greyed out...
It's my system features:
Windows Vista Edition Home Premium Service Pack 2
2 GB RAM DDR2 at 667 MHZ
Intel Core 2 Duo 2.4 GHZ OC to 3.0 GHZ
NVIDIA GeForce 9600GT 512 MB OCed - latest driver updates
Card mother MSI P6NGM
______
This video card is supported in Photoshop CS5, but this tool does not work!
Ways to solve this problem?
Looks like we'll have to resort to cheating Photoshop using OpenGL drawing. Download these reg files *, open them in Notepad, change of 11.0 to 12.0 (because they have for CS4) and then run both with YOU on their behalf.
http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4056
-
I updated my Vista home Premium to Windows 7 Ultimate but my Nvidia GeoForce 9600 m GT does not work
Hello
I updated my Vista home Premium x 64 Windows 7 Ultimate x 64, but my Nvidia GeoForce 9600 m GT does not work. It says Version Missmatched.
I have HP HDX X 18 - 1180US laptop.
Is there a link for update or fix this problem?
Thank you
Chance
Hello
Please use driver for Windows 7 of this:
Kind regards
-
Aspire 5745PG - driver NVIDIA on the acer support site does not install
I recently did a new install of Windows 7 x 64 on my 5745PG. I installed most of the drivers from the website of acer, except the NVIDIA display driver support:
NVIDIA Driver VGA 8.17.12.6619 This driver won't install - instead, he complains that no compatible hardware was found. Indeed, examines the installation files indicates that the material what the ID of my NVIDIA GeForce GT 330 M (PCI\VEN_10DE & DEV_0A29 & SUBSYS_04651025) appears anywhere in the nvac.inf, so there is no way it will install. (I've already installed the Intel HD graphics drivers, which I'm sure is a sine qua non).
There is another driver labeled NVIDIA, but for some reason when I install it the only thing it installs is "NVIDIA High Definition Audio", nothing to do with the graphics card.
NVIDIA
VGA driver VGA (M) 8.16.11.8986 Is it possible to properly install the NVIDIA driver and software on a new installation of Windows 7?
Nice day
Go into the bios and change your dedicated graphic mode / discreet, save the settings and then install the driver. I further advise that you download the latest driver from Nvidia site itself, 314.07 version: http://www.nvidia.com/object/notebook-win8-win7-winvista-64bit-314.07-whql-driver.html
Kind regards
FReeZA
-
Got my site up and running but lightbox is not working properly
Hello world
I got my website running, but my lightbox does not work properly. The descriptions of each painting is missing and the arrows and slide show function is missing. I don't know what I did wrong.
The link to the website is below.
http://www.sainteustacefineart.com/gallery%202.html
The Gallery is supposed to and operate as the Gallery at the website below.
I also made this site, so I'm at a loss as to what went wrong.
Thank you!
Ellen
Well, I got it working. I forgot to 'put' the JS folder (which contains the components of Yopougon). Some thing I overlooked because he was on the bottom of the files window and I do not see.
-
Hello
Im a bit new to Dreamweaver and my site is done, and my flight path images work when Im their opening my computer
but when I drop the
File index.html and 2 images flown over on my ftp. It does not work.
I go to the image map > rollover image and place the two images PNG and the link to the place where its going.
Could someone upload a screenshot how it looks when you click rollover image? My DW is maybe damaged...
Ive read on JavaScript... Do I need this? and is it difficult?
Here is the link:
Images will be displayed, but not the images flown over with a link;
carlanpontious.com
Thank you guys! Any help would be great!
Check that you have downloaded 01.png - mylogo24 and mylogo12 - 01.png to your server.
Your arrow will appear because as its uploaded on your server:
http://www.carlanpontious.com/icons/back-01.PNG
While the other two images don't because they are NOT in the place where the link that tells them they are
-
How can I get Adobe to provide rendering support traced 3dRay
for the GPU so that I don't have to go buy a GTX 670, 680 or 690 card, along with a new power supply, which it will need to run?
There is a 'hack' that is displayed all over the internet which explains how to add your GPU to the list of the EI of the cards 'approved '. Note that this is a feature not SUPPORTED in CS6, so proceed at your own risk.
-
I see only my background on the TV screen even if my monitor works fine. Do I need to install the new drivers to operate a second monitor?
If you want to use your TV only
If you have windows 8
Press
the Windows logo key + p
and choose
second screen only
If you have Windows 7
Press
the Windows logo key + p
and choose
projector only
If you want to have the same screen (duplicate), simply choose duplicate from the same options above.
-
The tool on, for me, works much faster than 4 hrs. I just ran yesterday on a Windows 7 factory restore and it finished in under an hour. It's your call.
-
I have an Acer Aspire One ZG5 AOA160 built in recovery will not work.
Apparently, he has a virus and touched the registry in the WRONG way. Since there is no CD-ROM/dvd-rom drive, is there a way to get recovery information for use with a USB?
Thanks for the comments on start Windows to the outside. It worked perfectly and took about 30 minutes to recover.
-
The 9-in-1 card reader no longer works. The Green led lights when I insert an SD card. I tried to restart. Cannot find the driver for the card in the Device Manager. Does anyone know how to fix this?
Thanks for all your help. I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard. Then I restarted the computer and it re-installed device drivers (message Windows came). For the first time, card reader devices actually appeared in Device Manager. Then I turned off the computer, reconnect the cable black and rebooted. Now everything works fine.
-
NVIDIA 7.15.11.138 does not work on my Satellite A200-1BP
Hello
official download site, I saw that there is a new graphics driver (Nvidia 7.15.11.138). I downloaded
it and try to install it on my machine, but it does not install. The error message that is my graphics card
not suitable for this installation program. What is the problem? Details of my machine as follows
Model name: satellite A200-1BP
Model No.: PSAECE-01U00XTEThanks for any help
Hello
Somewhere on this forum I found an ad that the driver is updated and can now be used correctly. Can you please check it again?
Please give some feedback.
-
Can anyone help?
Now, this is getting very frustrating.
I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
What is going on?
I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
Please help before I go out what remains of my hair.
What about FrankHello
You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.
Check with this site
http://www.confickerworkinggroup.org/infection_test/cfeyechart.htmlAlert on the Win32/conficker virus
http://support.Microsoft.com/kb/962007Protect yourself from Conficker
http://www.Microsoft.com/security/worms/Conficker.aspxHow to remove the worm Downadup Conficker (Uninstall Instructions)
http://www.bleepingcomputer.com/virus-removal/remove-Downadup-ConfickerHow to manually remove the Conficker worm
http://www.411-spyware.com/Conficker-worm-removal#how-to-removeBDTool to remove
http://www.bdtools.NET/-----------------------------------------------
Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
malware involved and if necessary use UnHackMe.Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows Update - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMalwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
http://www.Malwarebytes.org/Here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Run Malwarebytes when you can.
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
Close IE
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlDon't forget to do:
Logon as administrator
Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN
Enter each of these one at a time and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
------------------------------------------------------Here are a few rootkits if it were a question:
SpyDLL Remover - free
http://securityxploded.com/spydllremover.phpAdvanced Windows Service Manager
http://securityxploded.com/winservicemanager.phpRun the Rootkit Revealer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspxUnHackme - trial
http://www.Greatis.com/UnHackMe/This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
available as version above is 5.5
http://safecomputing.umn.edu/guides/scan_unhackme.htmlIceSword - free
http://www.AntiRootkit.com/software/IceSword.htm
Instructions and pictorial
http://securityxploded.com/IceSword.php
Tutorial for use of IceSword
http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3DRevo Uninstaller - free
http://www.revouninstaller.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Adobe Muse Site in preview mode before but does not work when published
Hello
I have an Adobe Muse site that works perfectly when it is in preview with any browser mode, but does not at all appear when it is published on BusinessCatalyst.
Someone has to meet this problem before?
Here is my test link: http://wss001.businesscatalyst.com/
Hey guys,.
Adobe support helped me to find the problem. Content tags we put on the block of text doesn't jive with catalyst for business. Remove the content tags contributed to publish the site.
-
HP Support Assistant - uninstalled and reinstalled - now it does not work!
My HP Support Assistant stuck on Create Restore Point. Well, I followed your instructions for which has been published in many other threads and uninstall HP Support Assistant and re-installed, and now it won't do anything. It opens upward and the button FOLLOWING is not highlighted if I click it nothing happens... it's totally useless now. What can I do to make it work again? Help! (see image below - all I can do is minimize, maximize, or close the screen. FORWARD button does nothing!)
My computer is only 1 year old and I run Windows 8-64 bit. Never had a problem with it before, but tried the air upward and it got stuck about to restore, so I followed your instructions, rebooted after UN-installing and uninstall, now, it won't do anything. I also tried to restore HP Support Assistant of the Recovery Manager and it's always the same: do nothing. How can I get my updates now?
I have a HP Pavilion p6 2310. I have installed Windows 8.1, it is fair to Windows 8. Thank you.
Never mind... I fixed it myself. I did a system restore before I uninstalled and reinstalled HP Support Assistant yesterday and now it works again!
Maybe you are looking for
-
Re: Processor Uprgrading a T8100 on Satellite P300
Hello I wanted to ask whether it is possible to upgrade the processor on my p300 laptop (PSPC5A-00U00E), he is currently using a t8100 processor.If so would it be possible to find what I would look for (t8400?) so I get a lot of compatible processors
-
Re: NB305 - increase in screen resolution from 1024 x 600 to 1024 x 768?
Is it possible to increase the screen resolution to 1024 x 768 (NB305 - 106 Windows 7 starter OS)? I'm hoping to travel with this excellent netbook and make the baseline review and edit video Panasonic AVCHD camcorder while away. Unfortunately the Pa
-
This is probably a stupid question, but I bought a WD cycloids and am set up time machine for that. As we have a family mac with multiple accounts, only can I configure the back on 1 account in sys prefs to cover documents etc on the mac as a whole?
-
Re: Satellite C660/1J2 and new BIOS
HelloI wonder if anyone can help, count it has bios win-1, 90 published February 2012, looked today and they have issued a new bios 1.70 dated 06/01/2012. What gives there is no recording of version 1.90 and I guess 1.70 is much earlier? and if we do
-
My creation of windows dvd worked well in the past, but recently it does not burn anything. When I set up a project and get set to burn, then just gets stuck on the screen "DVD Creation, please wait... "and she says"preparing 0,0%. " He never moves