Activate windows 7 on a refrubished unit.

Similar Questions

• I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.

  Series of Microsoft Windows XP Home Edition 2002 SP3

  I lost power when a transformer blew on my street. I'm short Windows XP Home Edition Series 2002 Microsoft. I DO NOT have the original version that has been installed on my computer when I bought the PC.
  However, I have a CD of reinstallation of Microsoft; but does not have my product key to activate Windows.
  Here is the information I have:

  PLEASE TELL ME WHAT TO DO!
  Thank you
  Tony
  E-mail address is removed from the privacy *.

  I can provide as much information it takes to get active Windows.

  Windows version: Microsoft Windows XP Home Edition Series 2002 Service Pack 2 installed
  System has been upgraded to Service Pack 3

  Name of the system:	D845EPI_
  Processor name:	Intel (r) Celeron (r) CPU 2 .80GHz
  The name of the BIOS:	BIOS Date: 26/09/03 15:01:32 worm: 08.00.08
  Adapter name:	NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  Installed memory:	2.00 GB
  Default printer:	Dell AIO Printer A92

  Internet browser: Mozilla FireFox 9.0.1 (x 86 en - us)
  2012 software-AVG current anti-virus & AVG PC Tune Up 2011
  I have Microsoft XP Home Edition with only SP3 Bootable CD
  I have a backup disk with my current data
  ________________________________________________________
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of system DELL-7089676EEE
  The system - INTEL_ manufacturer
  System model D845EPI_
  System Type X 86-based PC
  Processor x 86 family 15 model 2 Stepping 9 GenuineIntel ~ 2799 Mhz
  BIOS Version/Date Intel Corp., VA84510A.86A.0023.P08.0309261501, 26/09/2003
  SMBIOS Version 2.3
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  DELL-7089676EEE\DELL user name
  Time zone Eastern Standard Time
  Total physical memory 048,00 MB 2
  1.43 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 3.85 GB
  Paging file C:\pagefile.sys
  ______________________________________________________________
  Name NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  PCI\VEN_10DE & DEV_0110 & SUBSYS_00000000 & REV_B2\4 PNP device ID & 9BAF86 & 0 & 0008
  Adapter Type GeForce2 MX/MX 400, NVIDIA compatible
  Adapter Description NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)
  Adapter RAM 64.00 MB (67,108,864 bytes)
  Installed Drivers nv4_disp.dll
  6.14.10.5673 driver version
  File INF nv4_disp.inf (section lvl4)
  Color plans 1
  4294967296 colors Table entries
  Resolution 1024 x 768 x 60 hertz
  32 bits/Pixel
  0xFD000000-0xFDFFFFFF memory address
  0xE8000000-0xEFFFFFFF memory address
  IRQ channel, IRQ 16
  Port of e/s-0x000003B0-0x000003BB
  Port of e/s-0x000003C0-0x000003DF
  Address 0xA0000-0xBFFFF

  
  Pilot c:\windows\system32\drivers\nv4_mini.sys (6.14.10.5673, 1.81 MB (1 897 408 bytes), 30/11/2011-11:11)

  Please change your key of product before it is stolen! -also delete your personal information

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Impossible to "Activate Windows" - link broken or damaged, only to see a blue window with 2 Gifs in the upper corners.

  Hello

  I recently reinstalled XP Home after accident after the installation of SP3. I tried the clean install, no problems until the end of the 30-day activation period; to be honest didn't know that I needed too, but that's another story.

  After management reset the counter of 30 days, finally reconnected to XP, went through the SP3 update process ok, reboot ok, then tried Windows Update - re not headed to activation options... no problem, I have all the original disks, here's the problem though.

  I have to go through , then choose "Activate Windows" then...

  pop-up windows opens, blue background with title bar gray where it says activate Windows, but there is no option menu on screen? all I get are two. In each upper corner gif images (tells usually unloaded image on a web page)... and that's it, nadda, nothing else rises.

  I tried all the solutions on the Win Help pages (kb314935) and some other techy here guys (topics: Windows XP Home Activation window fails to run a repair... and the Article ID: 312295)

  I tried all of the following commands in the order...

  Regsvr32.exe regwizc.dll
  Regsvr32.exe licdll.dll
  C:\Windows\system32\oobe\msoobe.exe /A

  I ran across the "fix" WPAEvents, which does not work either...

  I rang the activation help desk United Kingdom who advised it wasn't their problem because I wasn't getting the option to activate by phone, so they gave me the number of the UK tech support... and of course they do not work beyond 18:00 or weekend (grrr) so I rang the support American number and after 10 minutes of blocking and accumulating of my phone bill they say "we support only from the USA and Canada, team support to try to the United Kingdom"... aaaaahhhhhhh

  So what someone has any ideas that don't involve repair XP as I did this one to death.

  See you soon,.

  Alum

  I had this same problem. Tried to repair windows xp with a slipstream sp3 and still no success. I found solutions by creating a new fake profile that created a new record for this user, and the correct activation window came and was successfully able to activate it.

• Cannot activate Windows 8 (error: 0xC004C003)

  I have the product key Windows 8 Pro
  and when I try to activate a key
  There show a 0xC004C003 error
  like this "error: 0xC004C003 the activation server determined the specified product key is blocked"
  Please help me...
  I had to use this key perfectly until I re - install Windows and cannot activate a key.

  How to activate Windows 8 by phone
   
  Press the Windows key + X and then click Run, and then type: slui.exe 4

  Then press the ENTER"" key.
   
  Select your "country" in the list.
   
  Choose the option "activate phone".
   
  Stay on the phone * do not select/press any option * and wait for a person to help you.
   
  Clearly state your problem to the support person.

  ======================================================

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Windows activation (United States only): (888) 571-2048

  J W Stuart: http://www.pagestart.com

• F9Z57PA #UUF: cannot activate windows

  Hello!

  I use an HP envy 15-j139TX model. My recovery disk and accidentally all things formetted. Now, I can't activate my windows. How can I activate windows? Please help me!

  BR,

  -Sasanka.

  If you can access your desktop. If so, click on the flag and the type of change your Windows product key

• Satellite C850 - missing product key to activate Windows 8.1

  Hi I have a Toshiba Satellite C850-1 kN and am upgrading to 8.1 windows I got to the screen asking for my product key to activate windows 8.1. I looked every ware on the laptop, the battery cavity on the brick power Ant (all the places the screen says to look) and can't find it I skiped this screen but I now get constant reminders to activate windows.

  Thanks in advance
  Omari Antony

  A few weeks ago I ve improved my U940 with Win8.1 and I did not ask for the activation of the product.
  Have you upgraded Win8 64-bit original version you got with your laptop?

• Envy dv7: cannot activate Windows 10

  A customer brought me a computer laptop dv7 want who came originally with Windows 8.0. He said that he had updated to 8.1 of Windows, then Windows 10. He wanted to transfer the machine to a parent, so doing a factory restore to 8.0. He brought to get me back to Windows 10. To save time, I did a clean install of Windows 10 and he pointed out activated. Now, a few days later he said that it is NOT enabled. After talking with Microsoft, I was told that I had to get the license key Windows 8.0 original of the motherboard anchored an entry like the license key to activate Windows 10. I have no idea how to get that key and reading that I've done, HP is not likely to be helpful on this. I even tried Windows 8.0 and 8.1 OEM key I have in stock, but they work no.  I'm open to suggestions and/or assistance on this.

  OK, finally found a utility called RWEverything that will allow to recover the built-in license key. Windows 10 still wouldn't turn on, so had to communicate with Microsoft. With this key, they have been able to check and activate Windows 10 for my client.

• -12H - Portege Z930 can't activate Windows 7

  Laptop comes with Windows 7 Pro 64 bit.
  Reason for the client software problems I decided to install Win 7 Pro 32 bit version.

  Everything is ok, but I can't use this Win 7 key to activate Windows.

  Activation procedure initially said that the Windows 7 Professional product key you typed is invalid for activation and after--the following information was found for this error: 0xc004e003. The Licensing Service reported that license evaluation failed.

  I tried this process several times (I did a typo in, etc.).
  But the message is the same. Windows 7 and the key are official.

  I tried to change the laptop time (in some cases time is in the future, the activation is impossible).
  So where can be problem? Can I change the BIOS settings?

  Hello

  Please wait a moment
  You have installed your own right of Microsoft Windows 7 system?
  In this case, you have purchased a license from Microsoft and that you got a new serial key.

  This key must be valid to activate Windows 7.

  Here you will find the simple steps how to activate Windows 7 via internet or phone:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

• I can't activate Windows Vista with product key OEM Toshiba - key is bad

  I can't activate Windows Vista with OEM Toshiba product key (the key is wrong). What should I do? Steaker from the bottom of the laptop key

  This key belongs to the preinstalled Vista. It's an OEM key and generally it doesn t work with other Vista OS.

• Satellite C50-A513 wishes to activate Windows

  Hello

  Whenever I log in, it asks to activate windows. also my windows (8.1 pro) is not currently enabled.

  kindly help how do I activate my windows now.

  According to Toshiba, Satellite C50-A513 product was pre-installed with Windows 8.1 unilingual 64bits.
  http://www.toshibamea.com/CSPDF/Sate...A513-52821.PDF

  Usually, the system already contains the product key and during the first internet connection, the system activates automatically.

  See this FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB2A03ET0000R01.htm

  Where the system cannot be activated, perform HARD drive recovery and try again once activate the operating system connect the laptop to the internet.

• Activate Windows 7-> WIndows-> Windows 10 8.1?

  I have a X 220 five years, which was running WIndows 7 Pro. I used a USB recovery to reset the machine, intending to have a clean win7 installation so that I could upgrade to Win10. I tried the restore on board, but it did not work. So I used a USB recovery I had created a year ago. For reasons I don't understand, it installed Windows 8.1 (I think I was using the right USB, but in any case, I can't go back now). 8.1 Windows wouldn't let me activate; the product key from MSFT on a sticker is for Win 7 and is generated by an OEM that does not recognize the site Web of MSFT. But I got messages from upgrade to Windows 10, which was what I wanted. The upgrade went very well, but now I have this permanent message to activate Windows, and of course it does not accept my product key Windows 7. So: What should I do now? Thank you.

  You may need to buy windows 7 Lenovo recovery media, put win 7, but they were mine, I'll try to call Microsoft to try first to activate by phone.
  http://Windows.Microsoft.com/en-us/Windows-10/activation-errors-Windows-10

• HP Probook s 4540: cannot activate Windows after Format

  I have a HP probook 4530 s. I just reformat the hard drive and tried to reinstall Windows 7 Pro, which is what has been installed before the format. Using the product key that I got using Magic Jellybean, it will not activate Windows. I had Microsoft tech support chat and I tried several ways to activate Windows and informed me that the activation has been blocked by HP.

  -J' have no recovery CD or key USB my relocation was carried out via an iso DVD engraved Microsoft I had for some time ago precisely for this laptop.

  -The product key was found using Magic Jelly Bean

  -J' confirmed my product proior and drivers format using dxdiag

  -There is a stciker of Windows 8 on the bottom of the laptop, but it has never had Windows 8 is installed on it because it was delivered to me there are 3 + years

  -There is no Windows 7 sticker anywhere on the box or in the battery compartment.

  At this point, the new operating system is installed, I have a clean Windows 7 Pro, but I can not activate using my current product key. What I have here form? Any help is greatly appreciated I want to just that set everything back again.

  Thanks for all the answers and assistance. I ended up reformatting the summer of car completely new and a new facility did the trick. Not sure why it worked, but it did. I don't know that I've screwed something to the top of the first time I did the installation.

• W540 updates of windows must activate windows 10 8?

  I just upgraded my windows 8 for 10 on W540 windows.

  I have not found windows 10 update on windows icon 8. so I download windows 10 Microsoft and make a bootable USB.

  and using this usb boot W540 and install windows on my W540 10, before installing windows 10 I format my partition.

  but when I run windows 10, it's sad that I need to activate windows 10

  I confuse it

  someone help me?

  Thank you

  Jeremy

  You must restore windows 8, then insert the USB from windows. Run the Setup program from the root directory of the USB

• Envy 15 t q300: activate Windows after add SSD

  -Recently, I bought an mSATA SSD and add to my book. Now I want to reinstall Windows 10 in this SSD, my Windows 10 is now on the HARD drive. Windows will automatically activate once I installed windows SSD or what I can do to activate it? My settings shows that 10 Windows activation is enabled with a digital entitlement, what is?

  -J' have a the HP USB recovery order, can I use it to install Windows 8.1 (my laptop came with Win 8.1) to my SSD?

  -One last thing, in disk management, there 2 partitions hidden before Windows (C, healthy (recovery Partition) and healthy (EFI System Partition), which ones, and if I reinstall windows SSD my windows will work fine without these 2 partitions?) I deleted the recovery partition in my HARD using HP Recovery management disk but the healthy (recovery Partition) has not disappeared.

  Excuse me for my English, I hope understand you.

  Cloudjumper265 wrote:
  

  -Recently, I bought an mSATA SSD and add to my book. Now I want to reinstall Windows 10 in this SSD, my Windows 10 is now on the HARD drive. Windows will automatically activate once I installed windows SSD or what I can do to activate it? My settings shows that 10 Windows activation is enabled with a digital entitlement, what is?

  Older versions of Windows offer a product key to activate Windows (as it is written on a sticker COST or built-in BIOS/UEFI).

  Windows 10 offers another option, called right digital.

  Probably, you had older versions of Windows and free upgrade to win 10. In order to keep your old version keys active Windows, Microsoft enabled Windows 10 using the new method. Win 10 has been activated using Windows 7 or 8 button, then this key would have been valid for the 2 versions of Windows (which is impossible).

  More information about this new option:

  > http://windows.microsoft.com/en-us/windows-10/activation-in-windows-10

  > http://www.winbeta.org/news/digital-entitlement-a-new-method-of-activation-in-windows-10

  Maybe you can get temporary, the computer HARD disk and reinstall Windows on the SSD drive. Then you can insert the HDD tray in and when everything is ready, you can format the HARD drive and use it as an extra.

  If your computer came with Windows 8.1 or 7 preinstalled and later upgraded to Windows 10, you can use the recovery media to install the previous edition of Windows, and then upgrade to Windows 10

  Alternatively, you can try to clone your disk SSD using a software like Clonezilla:

  http://Clonezilla.org/

  > http://lifehacker.com/5837543/how-to-migrate-to-a-solid-state-drive-without-reinstalling-windows

• CAN´t activate windows server 2012 (0x80072F8F)

  I seem to be unable to activate my Windows Server 2012 Essentials. All I get is the following message is displayed:

  Activate Windows couldn t

  Go to the control panel for some other ways to activate

  Error code: 0x80072F8F

  Error description: a security error occurred

  It is a presisting problem and I can´t figure out another way to activate in the Control Panel, what to do?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home