Active button not recorded data.

Similar Questions

• not recording data form to enter data after the kickoff

  Hello

  Entered data on the data to save is not after hitting the submit button in smartview.

  A regulation is attached to the same data to and executing on save, after recovery, it is not display enter data.

  It is urgent, please help.

  Concerning

  Thanks for your replies.

  The error apparently fixed itself, just gave some time for server and retried, everything works now.

  Concerning

• Do not record data values

  Hello
  
  When I enter data in a data form and save it, the message "the data has been saved" is displayed, but the values disappear from the form of data and are not stored in Essbase.
  
  What could be the reason?
  
  I'm planning 9.3.1.
  
  Thank you

  Hello

  This was repeated several times recently.

  Good reading of these

  Problem of saving data on the form

  Data not saving forms

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

  HI - try the following steps:

  On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

  -Double-click the Home button, and then drag upward on each of the app previews to close.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

  If this does not resolve the problem, try next disconnect and rematching of your watch:

  -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

  -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

  -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• I do not understand this statement "It is a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument."

  It's a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument.

  Which no longer applies in Logic Pro X 10.2.3. In old versions of logic, selecting a range with a software instrument automatically would make this instrument in "Live" mode, which means that the instrument has begun to transform any MIDI in sound with a minimum of delay. This direct mode becomes an instrument need CPU power (on a single processor) and peut overload the audio engine. It is a waste of CPU if there is no direct game. Then select an audio track would ensure that No instrument is in direct mode. Now (LPX 10.2.2 or more) in direct mode can be turned on or off on a track, chosen or not - it is the R button on the track header.

• Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent

  My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.

  When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.

  Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?

  Hi guys

  Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
  The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.

  So I see only two possibilities:
  Either you will charge the battery for real-time clock, or you ask the technician for replacement.

  Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
  If it will not help solve the problem if you contact the ASP for the RTC battery replacement.

• buttons to record shows only not in character animation

  Don't know what I did, but the buttons to record and playback are not appearing in the scene.  Does anyone know how to get back them?  Thank you

  Try the double click on the title of the stage in the project Panel

• Bit data does not record

  only two field data does not record. I placed a script, it works fine, but when it is open after saving a file, the fields are empty. Why this happen?

  event of calculation:

  var a = Itemnumber.rawValue;

  rowb var = xfa.resolveNodes ("form1.page2.Subform1.Table1.Row2 [*]");

  rowc var = xfa.resolveNodes ("form1.page2.Subform2.Table1.Row2 [*]");

  var WDT = xfa.resolveNodes ("form1.page2.Subform3.Table1.Row2 [*]");

  for (var i = 0; i < rowb.length; i ++)

  {

  var b = rowb.item (i). Calculation.rawValue;

  var bb = rowb.item (i). Total_dispensing. RawValue;

  if(a==b)

  var x = bb;

  }

  for (var i = 0; i < rowc.length; i ++)

  {

  var c = rowc.item (i). Initial.rawValue;

  var cc = rowc.item (i). Site2.RawValue;

  if(a==c)

  var y = cc;

  }

  for (var i = 0; i < rowd.length; i ++)

  {

  var d = rowd.item (i). ActualPatients.rawValue;

  var dd = rowd.item (i). Actual_patient. RawValue;

  if(a==d)

  var z = dd;

  }

  this.rawValue = x + y + z;

  If (this.) RawValue == 0)

  this.rawValue ="";

  In addition, I use acrobat X pro. another field of data in the same form to be saved.

  I extended my sample to manage the numbers Actual_patient as well, it looks like now.

  If (!.) Itemnumber.isNull)

  {

  this.rawValue = 0;

  rowb var = xfa.resolveNode ("form1.page1.subform2.Table2.Row2. (()_Calculation.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  If (rowb! == null)

  {

  this.rawValue += rowb. Total_dispensing. RawValue;

  }

  rowc var = xfa.resolveNode ("form1.page1.subform3.Table3.Row2. (()_ActualPatients.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  If (rowc! == null)

  {

  this.rawValue += rowc. Actual_patient. RawValue;

  }

  }

  And if the number can be duplicated, then it would look like.

  this.rawValue = 0;

  If (!.) Itemnumber.isNull)

  {

  rowb var = xfa.resolveNodes ("form1.page1.subform2.Table2.Row2. (()_Calculation.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  for (var i = 0; i)

  {

  this.rawValue += rowb.item (i). Total_dispensing. RawValue;

  }

  rowb var = xfa.resolveNodes ("form1.page1.subform3.Table3.Row2. (()_ActualPatients.rawValue_==_«_«_+_Itemnumber.rawValue+_»_») ");

  for (var i = 0; i)

  {

  this.rawValue += rowb.item (i). Actual_patient. RawValue;

  }

  }

  I updated my sample https://acrobat.com/#d=uQmAFWaVoHydJQ1Xtf0QhQ

  I still don't know how the values of number, calculation and ActualPatient are created in my example, you have to key in, once indexed in the match of calculation the expected results, you posted.

  Concerning

  Bruce

• Apple Watch activity is not in the cloud?

  So, I've been using a Apple Watch for a while and my number one problem is that 'Activity', I put together for the last year is not sync with the iCloud, so when I upgraded my iPhone 6 to iOS10 all my activity watch is gone. I tested this point last week and it seems that "Activity" app does not synchronize your data in the cloud, so if you lose your phone or your watch you will have to start all over again and latest data are lost. This seems to be a huge concern when I spend all this time my overall follow-up and progress. Everyone see what happens if you put to level or restart/reset your watch or your phone?

  Hello

  Health and historical activity data is stored on your iPhone. It is not recorded separately in iCloud.

  To guard against data loss, be sure to make regular backups of your iPhone.

  If the backup via iTunes, make sure to select the option to encrypt iPhone backup (unencrypted backup excludes the sensitive data, including health and activity). iCloud backups are encrypted as standard.

  More information:

  The backup of your iPhone, iPad and iPod touch - Apple Support

• iPhone'S will not record voice memos

  Hello! My new iPhone IS will not record voice memos. I can open the app very well, but when I press the record button it shakes just for a moment and then stops.

  The software is up-to-date (iOS 9.3.1), storage seems adequate (6.0 GB used, 5.6 GB available), MIC works fine in other applications (voice control, camera), so I'm not sure what the issue could be.

  Thank you!

  Try a forced reboot - after open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If this does not work

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Training activity does not save on Apple Watch

  Hello

  After a few months of working fine, all of a sudden when I finished a workout 'Other' activity me not is given the option to save the workout.  It is just to get back to workout options screen when you press 'end '.

  Also, I noticed that during the training that he does not show activity when I put my wrist, even if this field is selected on the iphone with "CV last activity", so I'll have to press the wheel to return to the main screen to be able to select "training" even once.  Not sure if this is related to the problem.

  All software seem to be up to date and I tried the classic "turn off and on again.

  The rest of the watch seems to work without problem, it's just what is a little annoying because this monitoring activity has been one of the main reasons to have the watch.

  Any help + tips gratefully received.

  With many thanks and best wishes

  Nicola

  Hi Nicola

  Try the following steps:

  • Close open applications on your iPhone:
    • Double-tap the Home button, and then drag upward on each Preview app to close.
  • Restart your iPhone and shows. The two put together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
    • To turn it on: press and hold the side button until you see the Apple logo.

• TCP data flow is interrupted by recording data (text entry)

  Hello, I am currently working on a senior design project where my team is currently developing a control system for a small wind turbine. We are adding sensors and wireless systems to the turbine. The sensor data will be collected and sent over a TCP connection. The Labview will serve as the listener and display the values on the web.

  I have problems with the registration however data.

  I would like for where you put in the time, you the datalogger to be active, then press a button and the data logger records the incoming values on the TCP connection and create a CSV text file.

  Whenever the loop of data logging is running, stops the flow of data from the sensor so all my recorded values are the same for the duration.

  Any input would be appreciated.

  Thank you!

  
  

• How to record data using a while loop?

  Hello

  I created a .vi I try to use to record several channels of data. I have implemented the user must be able to record data until the "STOP" button is pressed, then the data is saved in a spreadsheet file.

  Question No. 1: How to allow the user to store an indefinite amount of data?

  If you run the .vi as is, you will see that you are only able to collect 100 points, and registration takes place during Ms. I want to collect about 5 minutes worth of data and have a sampling frequency of 1 kHz.                 Any suggestions?

  Question 2: How can I change the worksheet file extension? Let's say I want than to save it as a .csv file?

  Thanks in advance for any pointers or suggestions!

  I have not looked at your code, but only based on your description I would implement a producer/consumer to save your data.  You must acquire your data in a loop (the producer) and send to your loop of logging (the consumer) using a queue.  Yes, you must save the data, then that is acquired.  In this way, you do not have to worry about storage who knows how much data in RAM.  It's just the disk as soon as he can.

  You can save the file with whatever the desired extension.  If you want it to be a CSV file, then do the extension a .csv.

• vo.setAttribute () does not display data on page OAF after DB update

  Hello

  We try to set search field values using vo.setAttribute (). It does not work as expected when there is NO update in the DB table, but it does not display the value on the screen of the OAF when we update the table DB (call parametrisee AM method in controller-> inside the AM by calling the update procedure)

  Query for VO:

  Select t_number, t_type, c_name, t_status, org, of xx_custom_tbl

  where org =: 1

  and c_name =: 2

  and t_status = 'EMPTY '.

  attribute1 is null

  Now we have a button, to the click, it will fill with data in the field list of choices for all ranks. We have made this requirement. But we don't want duplicates in all ranks. To do this, we update the column table as "USED" attribute1 Now, for the second row, when the original Version runs, will be will not display selected data in the first row (as call to the procedure to update the column Attribute1 is done for all ranks)

  We get the code snippet below:

  In the controller:

  If (pageContext.getParameter ("submitButtonClick")! = null) {}

  Vo = OAViewObject

  (OAViewObject) am.findViewObject ("LOVVO1"); Lov inside a Table of manual search VO

  Vo1 OAViewObject =

  (OAViewObject) am.findViewObject ("TableVO1");  Table VO

  While (vo1.hasNext ()) {}

  String org = pageContext.getParameter("Org2").toString ();

  int totalRecord1 = vo1.getRowCount ();

  Row1 row = vo1.first ();

  for (int i = 0; i < totalRecord1; i ++) {}

  String C_Nm =

  (String) row1.getAttribute ("CName");

  Org = string

  (String) row1.getAttribute ("Org");

  VO. Reset();

  vo.setWhereClause (null);

  vo.setWhereClauseParams (null);

  vo.setWhereClauseParam (0, Org);

  vo.setWhereClauseParam (1, C_Nm);

  vo.executeQuery ();

  While (vo.hasNext ())

  {

  Line = vo.first ();

  String T_Type = null;

  String T_Value =

  row.getAttribute("TNumber").toString ();

  Row1.SetAttribute ("Trail_Number", T_Value);

  pageContext.writeDiagnostics (this,

  «aaaI am here.3...» T_Value ' + '.

  T_Value, 1);

  If (row.getAttribute ("TType")! = null) {}

  T_Type =

  row.getAttribute("Trail_NumberType").toString ();

  Row1.SetAttribute ("Trail_NumberType", T_Type);

  }

  }

  Serializable RestrictData [] is {org, C_Nm, T_Value};.

  am.invokeMethod ("RestrictDataLOV",

  RestrictData);

  pageContext.writeDiagnostics (this,

  "After the update of the table ' +.

  Row1. GetAttribute ("Trail_Number"),

  (1);

  break;

  }

  Row1 = vo1.next ();

  }

  break;

  }

  throw new OAException ('updated Table values!',

  OAException.CONFIRMATION);

  }

  Analysis:

  About adding various debugging messages, we have experienced is not populate data in the screen when we update the Attribute1 to "USED". Otherwise, the vo.setAttribute () is working correctly and display the data in the form OFA (search-> row table).

  Can someone please help?

  Kind regards

  Zahid

  Hello

  The code above works fine, it just sets the table at the end of the record values. Since we have similar values, we could not recognize that we actually visualize the latest reports instead of the first 10 records; where vo.setAttribute () worked as expected.

  Also, the first 10 records are now shown by adding the following code to above:

  row = vo.first;
  vo.setCurrentRow(row1);
  

  Kind regards

  Zahid

• The family safety activity log shows no data for Facebook

  Original title: Family Safety + Chrome + Facebook

  The latest version of Live Essentials is installed on Windows 7

  Parental controls will not register the Chrome Facebook activity.
  I see in the activity that children use, for example, 0.5 hours of chrome, but there is no granular information.
  My daughter spent 2 hours on Facebook and the Family Safety activity log shows no data to Facebook.
  The computer is a new installation of Windows 7
  Live essentials have been installed yesterday.
  All web links for accounts for children have been created yesterday
  Does anyone have a suggestion on how to see real activity?
  Also, before someone suggests using another browser, is not an option, IE is uninstalled.
  Chrome is the only browser used because of all the android devices, we have.
  Thank you

  Client Windows Live Family Safety currently not reported HTTPS traffic unless the web of the child, filtering mode is set to "notify on the adult.  Facebook who worked in HTTP mode has recently moved that the HTTPS site and that's the reason to not see, Facebook or any other site that is HTTPS in the progress report on Windows 7 machines.

  It is resolved in Windows 8 and activity reports should show HTTPS traffic.

  Current work around that for Windows 7 client

  -Set the mode of web filtering to ' warn on adult "- child will receive a warning message if they go to all the adult sites and the parents will be informed in the annual report if the child decides to go to the site.

  Sorry for the inconvenience.

  Thank you

  Shankar