ActiveSync via Bluetooth: no available ActiveSync profile

Similar Questions

• ActiveSync connects via Bluetooth

  I have just reactivated my cell phone after 2 years of no use because of an accident. I have always used ActiveSync to synchronize my Outlook on this pc to my phone. The phone is a Motorola MPX-220. The pc is a Windows XP Tablet. I recently downloaded and installed ActiveSync to back up on this pc after a reimage Windows XP Tablet.

  The phone connects and very good ActiveSync with the USB cable but I can't connect via Bluetooth. I tried and tried. On the phone, you can open ActiveSync and then press Menu at the bottom right and press 3 to select Connect Via Bluetooth. But nothing ever happens.

  ActiveSync on the phone says connection for a while and then not connected. Below that it says synchronize with Windows PC and then below it says errors: 15/11/2010-21:15. The errors Word is blue, so if I hit the Center enter button, a message opens up saying unable to connect. Check your remote access settings or proxy are correct, and then try again.

  I don't know what it means to me or what I should do. My home pc I'm trying to sync with is a tablet which has turned on Bluetooth. There is no proxy or by modem setting I have ever been. It's Time Warner cable with a simple Linksys router to share internet and printer via wire to 2 PC and wireless for iPod to my daughter.

  Could there be a problem with firewall that is new is due to the fact that I use now the antivirus Security Essentials, which has also a firewall, I think?

  Hello

  ·        What kind of Bluetooth do you use on your computer?

  ·        Your computer include Bluetooth or use something like a Bluetooth dongle?

  ·        What battery Bluetooth do you use on your computer?

  ·        Have you checked to see if you can update the Bluetooth software that uses your computer?

  I suggest you run the fix that is present in the article mentioned below.

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

  I suggest you to contact ActiveSync forums to get help. Click on the link below.

  http://social.answers.Microsoft.com/forums/en-us/windowsmobileactivesync/threads

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No ActiveSync via Bluetooth with Treo 750v

  Hello

  I got a new Palm Treo 750v and paired with my desk at work (Vista SP1). ActiveSync via Bluetooth works great and sync my Treo with our Exchange Server.

  The next day, I tried to pair it with my PC at home (XP SP3), but I couldn't make a connection via Bluetooth. Bluetooth ActiveSync to work now not longer works. I tried the steps in the Article ID:41368 and a lot more once again, matching to reinstall WMDC, soft reset the Treo but can't get the sync via bluetooth work...

  When pairing the bluetooth connection, I see my PC company on the smatrphone with ActiveSync service activated. About bluetooth connection settings in WMDC PC society is allowed. PC is connected to the corporate network.

  I have no more ideas...

  Thank you

  Fred

  Try to remove all of your pairing and see if that helps. Not a bad idea to reboot the device by stopping and pulling the batttery. Windows Mobile tends to have memory leaks and can act as all right, but in reality it is limping.

• Error: "unable to start the service Object Push Profile (OBEX OPP)" when trying to transfer files from the Android phone via bluetooth

  Original title: Android mobile phone via bluetooth, I get an error on my phone.

  When I try to send a file by my Android phone to my laptop via bluetooth, I get an error on my phone saying "cannot start service Object Push Profile (OBEX OPP)". Reason: The return value is "false", but I can send files from my laptop to my phone OK.

  Hi steve3624,

  We recommend to check if there is no parameter which must be activated on your phone, then try to transfer the file to your laptop.

  We also advise to check if there are any service name Object Push Profile and start it. To do this, try the following steps:
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, locate Object Push Profile service and double-click it.
  c. change the startup type to automatic and click on the Start button to start the service.
  d. click ok to apply the changes.

  For further assistance, please get in touch with the assistance of the Android team.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio G20-118 and Active Sync via bluetooth

  I can´t do activesync to work when connecting my Pocket PC (with Windows Mobile 2003 second edition) via bluetooth. Can someone help or post a link to a help page?
  Thanks in advance,
  Miguel Amaro

  Hello

  As far as I know that the Pocket PC must be in the cradle.
  1 "tap" on start and choose the ActiveSync program
  2 then 'tap' on 'Tools' and select 'Options' from the ActiveSync program
  3. check under "enable synchronization when cradled using ' to see if the setting is on Bluetooth

  Important: Please remove the Pocket PC from the cradle, and then put it back in the cradle.
  It allows to activate the new setting

  Good bye

• Cannot pick up devices via Bluetooth

  MY iPad does not pick up the devices via Bluetooth

  What kind of devices? There is a limited set of Bluetooth profiles available for the iPad, it's a speaker or a headset, you try to connect with?

  In addition, if the device in question was paired with another piece of equipment you have, as a smartphone, it will automatically connect and your iPad will not see it.

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• Can we pair it two iPad via bluetooth using the remote keyboard/third

  I intend to buy two of 'Presidential teleprompter' overall using two iPads.  It is possible to combine two iPad use keyboard / remote via bluetooth?

  There is not enough information on ""ikan ELITE-REMOTE Bluetooth iPad teleprompter remote control ", if the app could connect and simultaneously control two iPad ."

  He would be grateful if someone could suggest a solution.

  Thanks in advance.

  I think that the profiles of the https://en.wikipedia.org/wiki/List_of_Bluetooth_profiles#Human_Interface_Device _ Profile_.28HID.29 HID

  take only be connected to one device at a time

  for you to get what you want a program must be running on both devices, likely using the https://en.wikipedia.org/wiki/List_of_Bluetooth_profiles#Personal_Area_Networkin g_Profile_.28PAN.29

  Profile and then there is if it would be in violation of the rules of the sandbox in app store security but with 3rd party keyboard being taken in charge, it might just

• Satellite A200 - cannot connect my mobile phone via Bluetooth

  I have the satellite A200 that came with Vista - I have upgraded to Windows 7. I tried for a few days to connect my new Nokia mobile to my laptop using bluetooth, but may not operate at all.

  The phone is OK as I have to connect it to my previous mobile via bluetooth. A few months ago, I had to do a restore system using the Toshiba drive - is it possible that this could have affected the availability of bluetooth?

  Any advice would be welcome - especially if someone can explain what it is I should do in a non-technical way. Thank you in advance.

  Question is: have you installed all the discs properly?
  You can activate the BT module using the FN + F8 key combination.

  I can't say for sure, but I assume that your BT in A200 camera is not correctly enabled.

• I can't the music playing in my car when I have iPod touch connected via Bluetooth. I get message says: CONNECT to THE WI FI TO PLAY music. Why not play via Bluetooth only?

  Hello..

  I'm playing my iPod touch in my car through Bluetooth. The audio system in my car recognizes the iPod via Bluetooth. but, I can't seem to play the music. I get a message on the iPod that reads to CONNECT to WI - FI TO PLAY MUSIC. There is of course no WIFI signal in my car, just Bluetooth. Why can't the iPod to play through my audio system via the Bluetooth connection? Why he keep insisting that I need to connect to the wi FI? How to play via a Bluetooth connection? The Bluetooth is in the car & on the iPod. It is synchronized to the top.

  Thank you in advance for help.

  Hi, Mishkapatches.

  Please visit Apple support communities.

  It sounds like you may be a subscriber of Apple music and media has not been made available to listen to offline.  I suggest you take a look at the article below.  This will guide you through the process of downloading music music Apple directly on the device so that you can listen to music when not connected to the internet.

  Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac or PC

  See you soon

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• Unable to send or receive files via bluetooth.

  Hey guys, I have a Microsoft bluetooth - the transceiver v3.0 Bluetooth dongle. This dongle came with my entire keyboard and mouse (Wireless Laser Mouse 8000 and Wireless Entertainment Keyboard 7000). In any case, before, when I was with Vista, I could send and receive files via bluetooth dongle.

  After the upgrade to Windows 7 Home Premium 64-bit, I can't do it, but I'm still able to pair my mouse and keyboard for it. When I try to send a file, this message pops up: "Windows could not transfer files. The file could not be sent because the connection could not be established. Make sure the Bluetooth radio is plugged. To try again, click the back arrow. »

  I uninstalled and reinstalled the software IntelliPoint/IntelliTypePro, which would be to reinstall the driver from the transceiver, but the problem persists. In Device Manager, bluetooth radios does not appear.

  Can anyone help me please with this problem?

  I posted it.

  Go to your system and look under Vista drivers and then look under Windows 7 drivers.
  There are Vista drivers and those who would have come on your system. There is no windows
  7 currently available drivers.

  Acer - Driver - go to your system
  http://us.acer.com/acer/service.do?LanguageISOCtxParam=en&miu10einu24.current.attN2B2F2EEF=3750&sp=page15e&ctx2.c2att1=25&miu10ekcond13.attN2B2F2EEF=3750&CountryISOCtxParam=US&ctx1g.c2att92=447&ctx1.att21k=1&CRC=2141378519

  You can also try an add-on BlueTooth complete that adds full system support if you can find one.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• No "send to bluetooth device" available after Windows 7 upgrade

  Bluetooth file transfer option is not available, or for adding devices blutooth

  i ' v just upgraded to windows7 windows vista Basic. I had been using bluetooth file transfer of files without problem with vista, but now the problem is that I can't find a way to transfer files via bluetooth. When I click on a file and scroll down to the option "send to", "bluetooth device" option is missing. or find a way to add bluetooth devices to my cmputer... Infact, I can't find any option associated with bluetooth! My cmputer has a built-in bluetooth adapter. Wat do I do? Help!

  I had the same problem, however, I got the solution on a forum. First in windows, search for a btsendto_explorer.exe research program and create its shortcut on the desktop. Now open the following C:\Users\...xyz...\AppData\Roaming\Microsoft\Windows\SendTo folder and drag the shortcut into it. Rename the shortcut in bluetooth. Enjoy... its done.

• BlackBerry Smartphones blackBerry 9380 no option "send via bluetooth".

  am I missing something? It drives me crazy. I can very well receive files, just cat find a simple way to send files via bluetooth. Even when I goto the send option I get only send by e-mail, etc.

  I'm on 7.0 Bundle 2220 (v7.0.0.513, platform 9.32.0.51)

  To do a firmware update or install something? I think its stupid how he does not come with this option as standard, I have also checked my sisters bb torch, which doesn't have the option

  Hello and welcome to the community!

  See this KB:

  • KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones

  If your device is non - BB, then substitute in the KB, the instructions appropriate for your device. Unless you're on BB OS 6 or 7, do not skip the step of "Receive using BlueTooth" on the receiver BB... nothing will transfer if you do. I can tell you that on my BB, if I navigate to a file (for example, image, etc, using Homescreen > media > > explores), and then when I press on the key, I have available ' Send', with 'BlueTooth' as one of the submenu selections... so I'm not sure why yours does not. Maybe if you detail the steps that you try, we might be able to spot something.

  Good luck and let us know!

• How to connect my Windows 7 PC to Internet via Bluetooth on my Windows Mobile 6.1 phone?

  I have problems connecting to the Internet on my laptop under that Windows 7, Bluetooth, plugged in on my mobile phone running Windows Mobile 6.1.

  The phone is a Samsung Omnia GT-B7610 and can access the Internet via 3G.

  I can pair the phone with Windows 7 via Bluetooth without problem, but I cannot yet access the Internet on the PC.  The process I use is:

  -Pairing phone and your PC by selecting devices and printers > add a device, etc., etc.  The device is successfully added.
  -Network and Sharing Center > set up a new connection or network > connect to Internet > set up a new connection anyway > Dial-up.  It is supposed to be a Bluetooth option on this screen, but I did not.

  When I do this:
  Devices and printers > right click on the paired Bluetooth device > properties > Services tab, I see that Active Sync Bluetooth Service as the only service available.  Is this correct?

  In addition, I can't get Windows Mobile Device Center to connect/sync to the phone via Bluetooth.

  Any help is very appreciated!

  Hi Kiti, thanks for the reply.  I had just a little work there is, however I came across a program that makes it much easier: WMWifiRouter.  I highly recommend it!