Add 0 in front of a number from 1 to 9

Similar Questions

• The data exported from Yardi, I need a column to change to have one - in front of the number

  I exported my Yardi GL to Excel.  In my debit column, I need to have a + before the number and one - to put in front of my number in the credit column.  I got tired of the number format, but it does not work.  I even chose the entire worksheet and copy then paste values to see if that would help and it has not done.  Any suggestions?

  An alternative is to define not as a date, but define it as a text.

  Here is a workaround to get the YYYYMM format you prefer:

  1. Ensure that your source to convert or A1 is defined as a text. Simply right-click on the cell, click Format cell..., select text in the category, and then click OK.
  2. The destination cell must use this form:
  • = CONCATENATE ("20", RIGHT(A1,2), LEFT(A1,2))

  This way you can convert to 201501. However, please note that the formula which suggested us will convert only year 2000 and beyond. Therefore, if the source cell contains 01/99 (assuming that the January 1999), it will be converted incorrectly to 209901 instead.

  Alternatively, you can use the form below instead:

  • = IF (VALUE (RIGHT(A1,2))< 50,="" concatenate("20", ="" right(a1,2),="" left(a1,2)),="" concatenate("19", ="" right(a1,2),="">

  The formula above converts 50-99 as of the early 1900s and 00-49 as of the early 2000s.

  Let us know if you need more assistance.

  Kind regards

  Kem Lun

• On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in sequence automatically, but number 10

  This is my first time using this forum. I hope that my question made its appearance and that this space is to respond to the answers possible, but just in case, here's my question again:

  On a PC using Windows and Adobe Reader, I sent 10 PDF files in a zip file and each label of the PDF file with a number from 1 to 10, so that they appear in the order I want. Numbered 1 to 9 records fell in the sequence automatically, but the number 10 appears under the number 1 instead of below the number 9. I googled the problem, do not see addressed. I called Microsoft, and they said it's a matter of Adobe. If anyone can help I would be grateful.

  Thank you.

  Not an Adobe issue at all. If you want your files to a single digit (1-9) to appear before the 10, you must add a zero at the beginning.

  01

  02

  03

  04

  05

  06

  07

  08

  09

  10

• It's free to call my Skype number from a mobile phone

  It's free to call my Skype number from a mobile phone

  No, it is not free. You will be charged by your mobile phone operator.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• How to read a number from a web page

  Hello everyone
  I need to read a number from a Web page. This number is the price of electricity online that is updated every 5 minutes. I need to use this award as a parameter in my controller

  any suggestion will be appreciated in advance

  Reza

  Just read the Web page as a text file and analyzed as mentioned here

• I tried to install CS3 with a serial number from my old computer to my new windows 7.  I tried installing and uninstalling. I've been on the cat

  I've been tryig to install CS3 with a serial number from my old computer to my new computer windows 7.  I have installed and reinstalled and rebooted the computer, takes off firewall and everything I know to do.  I was chatting to Adobe several times during the day and nobody seems to be able to help me refocus on my computer. This is the message I get when I put in place: you can only install a single Adobe product at a time.  Please fill out the other installation before installing Adobe CS 3.  I had a computer specialist to analyze it and try to help me, even the screen sharing and could not understand it.  He told me to call Adobe and as you know there is no one to help you live that can be very frustrating when you've spent the day and exhausted all options.  I know it worked on my computer and the fact yet but I use is more than one.  Can you or someone from Adobe please fix this.

  Moving correct Forum.

• I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

  I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

  Hi davidm1224,

  I regret that we do not any version upgrade to Acrobat DC of Acrobat 9.

  You can buy the full version of Acrobat DC.

  For more details, please visit: Plans and prices | Adobe Acrobat DC

  Let us know if you encounter any problem.

  Concerning

  Meenakshi Negi

• I lost the serial number from adobe photoshop elements

  I bought adobe first and photoshop elements together in a single package. The problem now is that I ve lost the package and I don't have serial number from Adobe first elements. Is it possible to get the Photoshop?

  If you buy or registered with adobe, check your account - Adobe ID.

• Hello, I lost my serial number from Lightroom, because I remove it from my PC. How can I take a new serial number?

  I forgot my serial number from Lightroom

  I write my Code from the DVD from Adobe Support.

  The answer is, there is also a serial number.

  Please help me!

  Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html

• find a number from a range of numbers...

  I have a table and the data as below... each id has sequencially number (from and to)
  Now I want to enter a number as a parameter as * 73 *... So how do I find the ID...

  ID           FROM             TO
  1              90                 100
  2              80                   89
  3              70                   79
  4              60                   69

  Published by: Selim_Rahman on October 24, 2011 06:38

  Hello

  Here's one way:

  SELECT     *
  FROM     table_x
  WHERE     73     BETWEEN from_num     -- FROM is not a good column name
            AND     to_num          -- TO is not a good column name
  ;
  

  If you had a table with a number any of target_nums (for example, 73), you can use BETWEEN as shown above in a join condition.

  Published by: Frank Kulash, October 24, 2011 09:40

• Zeros in front of a number will disappear?

  Good afternoon

  When I try and use the "format category" tab and change to a certain number, it will not display the 0 in front of the number

  i.e. 0054.

  I had to go back to the "none" category.

  As system by default does not work, I guess I have to the script.

  Is there a script for inter values are entered?

  I currently because none that allows letters in.

  You can use this code as the custom validation script:

  Event.RC = / ^ \d*$/.test(event.value);

• Add 0 in front in the binary number

  Hello

  I'm learing labview and I wanted to do something like that...

  I want to read in a text file.

  convert decimal numbers into binary numbers

  and then add zeros if the length of the binary file is less than the number X.

  and then eventually summarize all numbers binary and crawled into pieces 1 1 table.

  the reason to do this to me because I'm generating a singal.

  I started this topic, but I'm stuck in the comments, can someone help out me.

  Thank you in advance...

  The Format based on the string will do this for you.  Right click and change the options to fill with zeros.

  

  

• How to stop zero from the front of the number adobe reader software

  I'm filling out a form that asks for 6 issues. The first digit must be a '0', but when I move to the next field, it drops the '0 '.

  Is there something in the settings to avoid this problem? Thank you.

  If the scope has been defined as having a number format, and then it will hide all the zeros at the beginning of the value entered. However, these zeros are still there, behind the scenes and will be present at the output to export the form data.

  You can report a problem to the creators of the form, but there is nothing you can do about it.

• remove 1 fax number from outlook to use the Windows fax and scan

  I recently bought a new computer with Windows 7 operating system.  I try to use Windows Fax and Scan to send a fax using my Outlook address book fax numbers.  When I enter the phone number in Outlook it shows as (281) 555-1212.  However, it converts the number of + 1 for each entry, regardless of how I implemented the rules of numbering or not.  Then when I try to fax, I don't need + 1 to dial numbers, only the area code and the number.  I can't do the 1 = go away.  If I dial the number directly in the Fax Wizard, and then it composes correctly, but when pulling starting from Outlook address book that's messed up.

  Basically, I don't have the + 1 to dial local numbers.  Only the 10 digits.  When I get a fax in Outlook number, it automatically formats it with the front 1.  I found an article online that said that if I put a comma before the number to 10 digits, it forces the computer to dial only the numbers that I entered.  It works fine when I do that, then my problem is solved.  Thanks for responding.

• How to add prefixes to namespace to XMLType created from object?

  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  CORE 11.2.0.3.0 Production
  TNS for Linux: Version 11.2.0.3.0 - Production
  NLSRTL Version 11.2.0.3.0 - Production
  

  I work with SOAP request the creation of a pattern of derived Types.

  Consider the following annotated schema registration (I wanted Oracle to create types for me, but with my own names):

  exec dbms_xmlschema.deleteSchema(schemaURL => 'Parameters4.xsd');
  
  declare
  v_xsd xmltype := xmltype('<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" 
             xmlns:oraxdb="http://xmlns.oracle.com/xdb"
             xmlns = "http://www.cognera.com"
             targetNamespace = "http://www.cognera.com">
    <xs:element name="Parameters" oraxdb:SQLName="Parameters" oraxdb:SQLType="Parameters">
      <xs:complexType oraxdb:SQLType="Parameters">
        <xs:sequence>
          <xs:element name="Param1" type="xs:string" oraxdb:SQLName="Param1" oraxdb:SQLType="VARCHAR2" />
          <xs:element name="NestedItems" oraxdb:SQLName="NestedItems" oraxdb:SQLType="NestedItemsType">
            <xs:complexType oraxdb:SQLType="NestedItemsType">
              <xs:sequence>
                <xs:element name="NestedItem" type="NestedItemType" oraxdb:SQLName="NestedItem" oraxdb:SQLType="NestedItemType"/>
              </xs:sequence>
            </xs:complexType>
          </xs:element>
        </xs:sequence>
      </xs:complexType>
    </xs:element>
    <xs:complexType name="NestedItemType" oraxdb:SQLType="NestedItemType">
      <xs:sequence>
        <xs:element name="nParam1" type="xs:string" oraxdb:SQLName="nParam1" oraxdb:SQLType="VARCHAR2"/>
        <xs:element name="nParam2" type="xs:string" oraxdb:SQLName="nParam2" oraxdb:SQLType="VARCHAR2"/>
        <xs:element name="nParam3" type="xs:string" oraxdb:SQLName="nParam3" oraxdb:SQLType="VARCHAR2"/>
      </xs:sequence>
    </xs:complexType>
  </xs:schema>
  ');
  begin
    dbms_xmlschema.registerSchema(schemaURL => 'Parameters4.xsd', --this name is local to each ERS schema.                                 
                                        schemaDoc => v_xsd,
                                        local => TRUE,
                                        genTypes => TRUE, --only want the types
                                        genbean => FALSE,
                                        genTables => TRUE, --not sure if I need this
                                        force => TRUE,
                                        owner => user);
  end;
  /
  

  The types created were:

  CREATE OR REPLACE TYPE "NestedItemType" AS OBJECT ("SYS_XDBPD$" "XDB"."XDB$RAW_LIST_T","nParam1" VARCHAR2(4000 CHAR),"nParam2" VARCHAR2(4000 CHAR),"nParam3" VARCHAR2(4000 CHAR))NOT FINAL INSTANTIABLE
  /
  CREATE OR REPLACE TYPE "NestedItemsType" AS OBJECT ("SYS_XDBPD$" "XDB"."XDB$RAW_LIST_T","NestedItem" "NestedItemType")FINAL INSTANTIABLE
  /
  CREATE OR REPLACE TYPE "Parameters" AS OBJECT ("SYS_XDBPD$" "XDB"."XDB$RAW_LIST_T","Param1" VARCHAR2(4000 CHAR),"NestedItems" "NestedItemsType")FINAL INSTANTIABLE
  /
  

  I found that to build these types using constructors (to avoid the PLS-00306: wrong number or types of arguments in the call to 'NestedItemType'), that I needed to change these types (drop the xdb magic):

  CREATE OR REPLACE TYPE "NestedItemType" AS OBJECT ("nParam1" VARCHAR2(4000 CHAR),"nParam2" VARCHAR2(4000 CHAR),"nParam3" VARCHAR2(4000 CHAR))FINAL INSTANTIABLE
  /
  CREATE OR REPLACE TYPE "NestedItemsType" AS OBJECT ("NestedItem" "NestedItemType")FINAL INSTANTIABLE
  /
  CREATE OR REPLACE TYPE "Parameters" AS OBJECT ("Param1" VARCHAR2(4000 CHAR),"NestedItems" "NestedItemsType")FINAL INSTANTIABLE
  /
  

  I read on the forums of a hack to get a space of names added to the output:

  CREATE OR REPLACE TYPE "Parameters" AS OBJECT ("@xmlns" VARCHAR2(4000), -- namespace attribute HACK
                                                         "Param1" VARCHAR2(4000 CHAR),"NestedItems" "NestedItemsType")FINAL INSTANTIABLE
  /
  

  Putting it all together, I have:

  DECLARE
    v_Parameters    "Parameters";
    v_xml           xmltype;
    v_print_output  clob;      
  begin
    v_Parameters :=  "Parameters"('www.cognera.com',
                                  'hello',
                                "NestedItemsType"("NestedItemType"('one',
                                                               'two',
                                                               'three'
                                                              )
                                               )
                               );
      
    v_xml := xmltype(xmlData => v_Parameters);
  
    select xmlserialize(document
                        xmlquery('declare namespace soap = "http://www.w3.org/2003/05/soap-envelope";                                                              
                                  declare namespace cognera = "http://www.cognera.com";
                                  <soap:Envelope>
                                     <soap:Header/>
                                     <soap:Body>
                                       {/}
                                     </soap:Body>
                                   </soap:Envelope>
                                 ' passing v_xml returning content) as clob
                        indent size=2
                       ) into v_print_output from dual;
    dbms_output.put_line(v_print_output);
  end;
  

  This generates:

  <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
    <soap:Header/>
    <soap:Body>
      <Parameters xmlns="www.cognera.com">
        <Param1>hello</Param1>
        <NestedItems>
          <NestedItem>
            <nParam1>one</nParam1>
            <nParam2>two</nParam2>
            <nParam3>three</nParam3>
          </NestedItem>
        </NestedItems>
      </Parameters>
    </soap:Body>
  </soap:Envelope>
  

  What I really want is:

  <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:c="www.cognera.com">
    <soap:Header/>
    <soap:Body>
      <c:Parameters>
        <c:Param1>hello</c:Param1>
        <c:NestedItems>
          <c:NestedItem>
            <c:nParam1>one</c:nParam1>
            <c:nParam2>two</c:nParam2>
            <c:nParam3>three</c:nParam3>
          </c:NestedItem>
        </c:NestedItems>
      </c:Parameters>
    </soap:Body>
  </soap:Envelope>
  

  How can I do this without having to add to the namespace using the custom XQuery function?

  Both outputs are semantically equivalent.

  Why do you need one?