Add a new parameter to bounce the database?

Similar Questions

• Bounce the database from backup

  Hello
  
  I use oracle10g with database pending. Here is the version of database.
  
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64bi
  PL/SQL version 10.2.0.3.0 - Production
  CORE Production 10.2.0.3.0
  AMT for Linux: release 10.2.0.3.0 - Production
  NLSRTL Version 10.2.0.3.0 - Production
  
  Now, I want to increase the number of processes in the primary database. Primary needs downtime. But in this case, do I bounce the day before?
  
  Let me ask my questions here.
  
  1 should I I bounce the day before to this scenario?
  
  2 here are the commands and the sequence of steps to stop and start the database. Please correct me if I'm wrong...
  
  2 (a) stop of the standby database first. (run this command at the secondary level)
  
  Connect / as sysdba
  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
  SQL > shutdown immediate
  
  
  2 (b) primary stop (run this command in the primary)
  
  SQL > ALTER SYSTEM SET PROCESSES = 999 SOPE = spfile;
  SQL > SHUTDOWN IMMEDIATE
  
  2 c) primary startup
  
  SQL > STARTUP
  
  beginning 2d) the secondary database
  
  Connect / as sysdba
  startup nomount
  ALTER DATABASE MOUNT STANDBY DATABASE;
  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.
  
  
  (3) after starting the database, how can I make sure, primary is on sale the archivelog in high school?
  
  
  
  Any help is appreciated...

  The backup database can be upward as you restart the primary database - which is not a problem.

  Just compare V$ MANAGED_STANDBY standby with V$ log primary: sequence # process MRP with APPLYING_LOG status must be equal or close to the sequence # who is CURRENT in V$ LOG of primary.

  You must also set the parameter to the eve with scope database = spfile. So after a failover or a passage, the setting is the same on your new primary database.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• Add or table column to remove the database I have to rework for VO and EO?

  Hello
  
  I have a table called Employee
  I created the ViewObject (VO) and EntityObject (EO) in Jdeveloper.
  If I add or remove any column of the Employee table.
  do I need to recreate the VO and EO again. or it does not reflect the changes to the table automatically?
  
  Help, please...

  yshintre,

  You right-click of your OA and select "Synchronize with database" to have the new attribute added to your OA. You can then edit the original Version and add the new attribute by the shuttle in the list.

  John

• agent12c add target (unable to connect to the database: i/o error)

  Hello
  
  When I try to manually add the target in 12 c oem, I get below error:
  
  
  

  Failed to connect to the database: IO Error: The Network Adapter could not establish the connection The Connect Descriptor was (description=(address=(host=db.localdomain)(protocol=tcp)(port=1521))(connect_data=(service_name=orcl)(instance_name=orcl)(UR=A)))

  I can confirm that database and the listener is up and agent upload is successful.
  Appreciate any suggestion.

  Please try connecting as below to the database machine.

  / bin > dbsnmp sqlplplus /@ ' (description = (address = (host = db.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = orcl) (instance_name = orcl)(UR=A))).

• How to add a new virtual machine to the ESX host using the existing files?

  I need to implement a function clone without the use of cloneVM_task. I copied (a special copy) a set existing VM Directory Active Directory to a new directory and renamed copied all files prefix name of the new direcotry.  What task VM (reconfigVM_task, createVM_task or registerVM_task) command can I use to add that the new copied VM on the ESX host? I need to manually update the .vmx for new UUID file and other parameters?

  Thanks for any help.

  I think that as long as you have updated all the names to reflect the new clone you must be fine and on the first step, you will be prompted with a question.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• How can we add a new root menu in the menu of adobe illustrator?

  Hi all

  The illustrator of adobe CS3 with suite menus root file, edit, Object, Type, select, filter, effect, display, window, help. I want to add a new menu root just after aid. Is it possible by the SDK?

  
  Thanks in advance

  Farida kaid

  Top-level menus can't be added with the SDK.

• Producing a XY chart in a While loop that adds a new point XY to the curve from each while the loop iteration

  I would like to plot data by using the XY graph as a Visual display. I have a While loop that creates a new point X and Y during each iteration. I need the XY graph to be in the While loop, because once the order to stop has been pressed the sis loop finished and the final graph to be displayed. The problem is that after each iteration, the XY graph display clears and watch point, compared to add the new point to the previous by a line connecting the two points. It works perfectly if I move the XY graph out of the While loop, but it only shows the XY graph at the end of the While loop. I would like to visually see the XY graph updated during the execution of the While loop. Any help would be much appreciated.

  Thank you

  You can add a data both point to a chart to a chart, you must pass the entire data group.  I would use a couple of shift registers in your loop.

• SQL query on how to add a new column to display the result

  Select emp_code, < new column = 0 >
  from employee_table where < < condition > >
  
  syntax to add the new column?
  
  Published by: user9027633 on March 4, 2010 02:53

  user9027633 wrote:
  Select emp_code,
  from employee_table where >

  syntax to add the new column?

  Published by: user9027633 on March 4, 2010 02:53

  Want you like this

  selec emp_code, 0 new_column
    from employee_table
  

• How can we add a new menu item in the file Menu?

  Hello

  I want to create the menu item on the file Menu, I want to create a new menu item, just after the item "save under...". ». Is this possible with SDK?

  Thanks in advance

  Farida kaid

  You can file a new menuitem in any "menu group" defined by the Illustrator. If you look at AIMenuGroups.h, you will find the names of various groups of menuitems. There are two that might be what you want: kSaveForMenuGroup & kSaveMenuGroup. I can't remember how much control you have within a group, but it would at least allow you to get close enough.

• Can I add a new graphics card for the Yoga 12 Thinkpad?

  I recently bought the yoga of thinkpad 2nd gen and I was wondering if I could update the graphics card in it. I have a Nvidia card in my last laptop Lenovo I could possibly switch.

  Good day and welcome to the community.

  There is no way to update the graphics in your machine, because it's a circuit integrated in the chipset CPU package. In addition, the graphics from nVidia in your other laptop Lenovo, while a discrete GPU, are also welded to the system board. Therefore, it is non-removable.

  Hope this helps to clarify.

  Kind regards.

• Add a new database to the listener

  Hi all
  on 10 g
  How to use netca, can add a new database to my interlocutor?
  
  Thank you.

  Do you really need to add the database to the listener?

  Why not just use dynamic record by setting the parameter 'local_listener' in the database?

• Add multiple article in the database by a simple click

  Hi friends,
  
  I have a problem: -.
  
  I have a bill with several point for example. Grapes (25) with amount here and now I want to add these question with quantity in my database, Badam (145), banana (49), Apple (12)
  When I finally click on submit button.
  
  Actully I was used as a table but I am facing a problem when using tabular, tabular, I enter first item for example. Apple and there quantity for example. * 12 * in the textfield and then click Add line enter Buttom went to the database. but I want that entry should not go the database. But only the new line should add when I click on the button Add a line.
  
  I want all these point 4 should enter into the database when I click on Submit Final.
  
  
  
  Maury

  Maybe it was more than 10 hours; ), answer is here How can insert quary in database by using the collection.

• AMT: cannot allocate memory - is there limit to the databases on a single box num

  Hello
  
  Specification of the server:
  Windows 2008 R2 x 64 with all updates applied
  
  Oracle 11.2.0.1 Standard Edition with Patch 16 applied (which corresponds to all the live database version)
  
  10 GB OF RAM
  
  I have a standby server that has all my databases to watch over him
  
  Recently, I added about 8 new databases on hold to take to 102 and since then I get an intermittent error of TNS. AMT-12531: TNS: cannot allocate memory
  
  I have scripts that loop in all databases one at a time, they start the standby database, apply the new recovery logs archived and close the database
  
  It worked perfectly for years but I started having problems after you have added a few other databases, it probably defective 1-3 times so it is inconsistent.
  
  With all databases only idling server use 6 GB out of the 10 GB RAM available so there is a lot of memory free
  
  If I withdraw half a dozen databases in the scripts, it starts working again.
  
  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages
  
  Server has been restarted several times and sometimes travel a couple of times before failing and sometimes will fail in the first inning thanks to
  
  Failures are normally towards the end of the script, IE. has applied the newspapers to 95 databases and fails when the 96th!
  
  I reorded the data bases in the script and it still fails at the end, not on a specific database
  
  I also added restarts listeners for scripts that made no difference
  
  I've now changed my scripts, then real windows service does not work for databases and the script makes a net start before applying the newspapers and a net stop eventually. She's now going through without a problem but I would go to the bottom of the issue and keep windows running services in the starting and stopping of their adds time for labour to apply the logs across all databases
  
  Thank you
  Robert

  Have you tried a note

  AMT-12531 on Windows 64-bit [ID 1384337.1]

  I created 2 new listeners and divide the databases for the half to run on a single listener and the other half on the other, there are still intermittent outages

  I don't think that you need several headphones if a listener is enough to support all of your databases running on a server.

• Edit in the database field

  Is there a way to change (update) a field in a database?

  So I have a 2D array in the database and I know that the index of the line and column of the field I want to change.

  Another way is reading the 2D table, alter table 2D deleting 2D-table of the database and insert the new 2D array in the database.

  But I fear that this will make the slow program.

  I hope so it is more quick/easy way?

  Thank you

  You will use the SQL UPDATE command.

  http://www.w3schools.com/SQL/SQL_UPDATE.asp

• You don't have MS or P how you will bounce the Pb of the file?

  Friends,

  How will bounce the database when SP or PFile deleted from the server? How to handle such a scenario?

  Thanks in advance for your advice.

  Kind regards.

  Robin

  If you have not yet the pfile file by default so you must re-create the pfile file. There will be entries recorded in the alert.log during each boot is pfile parameters, take help from that and start the database with this file.