Add Wizard hardware detects new hardware when I don't have any new material

Similar Questions

• I'm trying to add bookmarks in my PDF file but I don't have any options to do this and do not have the bookmark side of left hand tool.

  I looked towards the top of various discussion sites and it looks like to If the file is not a PDF document marked when it is open, the file must be recreated and the settings must be changed.

  I can't understand how to recreate a document to bookmark.

  Can someone help me please?

  Adobe Reader cannot create bookmarks; you will need Acrobat for that.

• I get error messages on my dial-up connection when I don't have a dial-up access!

  Original title: "Windows Mail problem"

  When you use Windows Mail, I got error messages on my dial-up connection when I don't have a dial-up access! Is no more, I can send or receive mail using windows mail. I have a connection high speed and have never had this problem before? Can you help me?

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection. It shows for the connection?

  You should leave this setting not selected, in this case Windows Mail will use any connection IE uses.

   

  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.

   

  If you still have the same problem later, the account may be damaged. Remove account, restart Windows Mail, and then recreate the account.

   

  Gary van, Microsoft MVP (Mail)

  "RhondaRLee" wrote in the new message: * e-mail address is removed from the privacy... *

  When you use Windows Mail, I got error messages on my dial-up connection when I don't have a dial-up access! Is no more, I can send or receive mail using windows mail. I have a connection high speed and have never had this problem before? Can you help me?

  Gary van, MVP (Mail)

• How I picked my email address when I don't have an alternative email to reset it and the mobile operator that I use is not there at all. Thank you

  How I picked my email address when I don't have an alternative email address to reset and also the mobile operator I'm using is not listed it at all.

  Hotmail gives me a few options, but non of them is useful to me...

  The problem is probably my junk e-mail generated from my e-mail address or something else, I don't know about you!

  Thank you

  Hi Beqiri2012,

  Just to clarify, please repost your question on the Hotmail Forums below to help with your Hotmail account number:

  http://windowslivehelp.com/forums.aspx?ForumID=d3fda415-1e53-4007-8e0c-2a77180ffb1d

  Thank you!

• I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.

• I have Adobe Photoshop Elements 9 for Mac and I changed my iMac and I don't have any CD player on my new Mac! How can I install PS elements 9 without a CD player? Can I download it?  I prefer not having to buy a new one! Thank you for your help

  I have Adobe Photoshop Elements 9 for Mac and I changed my iMac and I don't have any CD player on my new Mac! How can I install PS elements 9 without a CD player? Can I download it?  I prefer not having to buy a new one! Thank you for your help

  Hi Nathalie,.

  You can download no doubt

  The download link is available here: https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

  Let us know if this helps!

  Kind regards

  Aurélie hamadi

• How install my copy of lightroom on my laptop when I don't have a CD player?

  How install my copy of lightroom on my laptop when I don't have a CD player? Is there a place to download "digital"?

  Download Photoshop Lightroom refer

  Hope this will help you.

  Kind regards

  Hervé Khare

• After you have reinstalled my old CS6 Design Standard on a new Mac Pro I can't use the updates in help. I only receive offers on update creative Cloud applications. I don't have any application of CC. How to find updates for my applications CS6?

  After you have reinstalled my old CS6 Design Standard on a new Mac Pro I can't use the updates in help. I only receive offers on update creative Cloud applications. I don't have any application of CC. How to find updates for my applications CS6?

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Relocation of the PS assistance when you don't have an old serial number of the previous product

  Can anyone help to reinstall PS when you don't have an old serial number of the previous product? Shocked I was on NO HELP from adobe support phone for 3 hours without a pick up on my call...

  If it is an earlier version, you should probably be activated phone support and possibly support both cat.  It's probably the beginning of the end of the week where the phone help, which would explain your expectations... they might be back come Sunday night U.S. time... even with the help of the chat.

  If the older version has been registered, it may be available through your adobe online account.

  Try the chat support when they are available - or the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Password reset disk wizard wants to use Drive F - I don't have an F drive

  Desktop HP Pavilion p6610f Windows 7 Home Premium 64 - bit installed Just the new hard drive and all the new updates and new programs etc.  I created the repair disk system and a full backup and wante to create a password reset disk. When I click on 'Create a password reset disk' in the control panal and I begin to follow the wizard, it asks me to put a key memory in drive F.  I don't have USB keys or disks if that's what is meant.  I was going to use a DVD - RW disc, but of course, I am unable to do so.  Why does say to create a 'DISC' in one place, and then when I go there, it says that I have to use a 'KEY' 'DRIVE F "?  If I buy a USB flash drive, which is identical to a key memory? And... I have several USB ports, none of them can be used with the USB to store data or memory?  I looked in the 'Help' section and he said just to click on "create a 'Disk' password reset. Thank you in advance for any help you can provide.

  Thank you for your time, but I already did the cover, back, vision of diagnostics and repair of disks.  I just asked why, when it is suggested that I create a 'PASSWORD' reset disk, when I start to do exactly that, the wizard tells me that I have to use a USB, 'NO' a 'DISC' and use the 'F' reader which I did not, (I don't think), I mean I know there are additional slots for disks , but I don't think I have other than those that I used to do the other ' Just discs in case where.  Just curious.  I have resigned myself to not do a. I wrote my password on a piece of paper and taped it on the underside of the top of a desk, where nobody would ever think to look.

  Taylor

• Why my 6s Iphone says that I used 44,59 GB of data and documents when I don't have? Recently updated to iOS 9.2.1 and having problems.

  I bought the new 6 s iPhone with 64 GB of storage in December. A few days ago I updated to iOS 9.2.1 and I got a notification the next day saying that my storage was almost full. I was shocked because I have not yet used half of the 64 GB and before I upgraded to the latest updated everything worked well. Also, on a side note, game Center does not work and when I try to open the app it's just a blank screen and when I go into settings, click on the play icon, it does not even open.

  Back to the problem of storage, I don't not even use a lot of my storage upward. Look at the photo for reference. This photo was taken after I updated.

  So I am very confused right now with my phone and I have only had it a month ago and it's already the case. It does not make sense to me to have only 4.84 GB free. I used 6,76 Go on applications, and I have 20 apps and I understand that, but whence this other 44 gb?

  Why do we say I used 44,59 GB of data and documents when I don't? Could be a problem due to the update to iOS 9.2.1?

  BradCalifornia15 wrote:

  So I am very confused right now with my phone and I have only had it a month ago and it's already the case. It does not make sense to me to have only 4.84 GB free. I used 6,76 Go on applications, and I have 20 apps and I understand that, but whence this other 44 gb?

  Why do we say I used 44,59 GB of data and documents when I don't? Could be a problem due to the update to iOS 9.2.1?

  Connect your phone to iTunes on your computer and see what the ability the bottom bar shows for storage. You can have one large amount of 'other' data which may indicate a corrupted sync or corrupted update. If you have backed up with iTunes before you update, try to restore the backup.

  Take a look at the Board to the alarm user.

  What is 'Other' and what I can do about it?

• McAfee error code when I don't have Mcafee?

  I tried to download and install ZoneAlarm.  I get a msg that TMP has stopped working.  "GLB4D55. TMP '.  then windows looking for a solution and tells me that I must go to McAfee and discover why ceased.  I don't have McAfee.
  Anyone know why this is happening?

  GLB4D55. TMP

  This file returns nothing in a Google search.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Download and run the McAfee removal above, tool in case there is remannts of the trial of Mcafee on your computer when you bought it.

  Also scan for Malware:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform full scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I reinstall windows vista when I don't have the CD?

  I have a problem with my windows vista and I need a new facility, the problem is that I don't have the CD because it was installed when I bought the laptop.
  My windows is Vista Business, SP2, 32-bit, 2007!

  Thank you!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install Windows 7, when I don't have an installation disc?

  My lap top was installed with windows 7 when buying, but I did have all the disks with it, but now 2 years later I had to have the hard drive replaced but I don't have the disc of windows 7, but I still have my code to use how to get windows 7 new?

  You have been given some discs but you have invited to MAKE the RECOVERY PARTITION recovery disks...

  You will need the code key on the COA sticker that is on the basis of your machine, or perhaps in the battery compartment.

  Also, make a note of the version of Windows 7...

  Download the version that matches your COA sticker...

  Windows 7 Ultimate SP1 - U ISO

  English x 86: X 17 - 59463.iso

  English x 64: X 17 - 59465.iso

  Windows 7 Professional SP1 - U ISO

  English x 86: X 17 - 59183.iso

  English x 64: X 17 - 59186.iso

  Windows 7 Home Premium SP1 - U ISO

  English x 86: X 17 - 58996.iso

  English x 64: X 17 - 58997.iso

  Note that these are the generic ISO and will not include the of the manufacturer specific drivers for your machine.

  You will need to go to the computer manufacturer support website and install readers device starting with the chipset driver and working from there.

  Do NOT accept the drivers from Windows Update...

• Provides continuously updated Office when I don't have Office

  OS: Windows 7 Home Premium 64-bit

  My computer came preloaded with a trial version of Microsoft Office Home and Student 2007. I uninstalled since then. Even if she is no longer installed on my computer, Windows Update continues to harass me with Office updates I don't want or don't have. I have all the updates installed, even a handful of previous updates of Office when I had the software installed. Since I have no Office, I have no use for updates more to it. So I would like to know how to stop this nagging incessant Office Update.

  I would appreciate an actual useful answer, and not just a copy - paste no relevant auto answer. Thank you.

  Viewer Word 2007, Excel 2007 Viewer, PowerPoint Viewer 2007 and/or Office Compatibility Pack is installed? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft