Adding a preloader for an existing sequence

Similar Questions

• How to add preloader for an existing swf?

  How can I add a preloader for a swf already done?

  also, I have the preloader opened upward in the separate html file.

  don't want to buy all the programs to do so.

  I tried it by changing just the names of file filename preloader to load the swf file.

  but it push all the content on the right side of the screen.

  Yes to determine the dimensions of the same thing as your movie. You have the FLA of film you? you use any fscommands in there?

• Best to load the preloader of external file or place it directly in the existing sequence?

  It is best to load the preloader of external file or place it directly in an already existing sequence?

  No, there is no significant performance problems.  the loop which is used in the preloader must be completed (or be fired) when the loading is complete.

• Something weird... And existing sequence slide on the timeline, clips inside are added instead.

  When I drag an existing sequence in the timeline the clips are moved, but not the single movie file.

  Why does this happen?

  How to drag the element of sequence only?

  In the upper left corner of the timeline, toggle this button:

  

  MtD

• Questions about adding a NAS to the existing environment

  Hello

  We have an existing deployment of VI with an EMC SAN and three ESX host.  We would like to add additional storage to NAS and storage ISO tests.  To do this, we were going to set up a RHEL 5 server, as others on the forum have done and use NFS to provide a data store for ESX.  However, I have some questions that I found only partial answers on the forum.

  (1) is there a performance by adding NAS on the network of IP storage for the existing deployment of VI?  Our EMC SAN uses iSCSI to provide a storage boxes currently.  Mix iSCSI and NFS on the IP storage networking a bad idea to turn performance and stability?  Anyone done this?  Looks like a logical thing to do that many small deployments may not afford to buy company for test/development equipment and storage ISO.

  (2) what are the security implications of placing an NFS server on Red Hat-based IP storage network?  How to do this safely?  All posts of forum and documentation of security seem to focus on the need to separate the traffic of IP storage (which is clear text) to run virtual machines or physical servers.  In order to add the NAS on the network of storage, we allow access to the Red Hat server for IP storage network.

  (3) is there a way to limit the traffic on the network interface facing the storage over IP to NFS network only?  We would be two interfaces on the server Red Hat to fight against it, as our network of IP storage is not returned to the other networks in some way.  It is an isolated network by design, for security reasons.  Thus, we would need an interface connected to the stroage and one IP network that is connected to one of our management systems.

  Thank you.  I appreciate your help.

  James

  Hello

  I can understand a problem of pure load.  What I meant is there at - it a greater load on the servers simply having to use two different storage (NFS and iSCSI) protocols?  Or is it better to use iSCSI on the storage of test/development device so that we only configuring and using a storage Protocol?

  There is some overhead in the vmkernel, but it is also to be expected.

  I think that it is at the heart of the case.  I don't use a full OS is the way to go for me.  I'm really a Windows administrator and my knowledge of Red Hat is somewhat lacking.  On this basis, it may be preferable to use a storage OS like Openfiler or NexentaStor.  Do you have an opinion on which one is more stable or efficient?

  Openfiler is Linux or FreeBSD. I still have to examine in detail, but in both cases, they are both complete BONES. Openfiler is much easier to use, however, and will be iSCSI or NFS. If it were me, and I didn't know anything about Linux, I'd use Openfiler.

  VMs allows access to the storage indirectly however ESX.

  Great, so he can participate in your existing IP storage network.  Configure web access (management) to Openfiler being on the same network as for existing SAN management application. Then have your data on the IP storage network.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• Cannot find the document class - is there an underlying Preloader for AS3 CS5?

  Hello world

  I am running in an instance where I am trying to load a file "main.swf" using the Loader class and the content of the «evt.currentTarget.content' to «[object Main__Preloader__]» points Then that evidence of the content of the loader, I would expect that the trace would show similar to "[focus]", given that the document for the main.swf class is 'hand '.

  In Safari, I get the file to load and play properly (admitingly by a work around) However, on Firefox for mac all that appears is a kind of "preloader" (what I can assure you that I have not created) that looks like this:

  This is the animated sequence

  1. o
  2. OO
  3. OOO
  4. oooo

  I will mention that I use CS5 on a mac and this file works fine when it released CS4 to FP9 versions. I will also mention that the main.swf contains goods imported from a RSL.

  Any ideas?

  Thanks in advance,

  Mike

  is not serious.  with the help of a tlftextfield with runtime shared library requires a preloader (for your library of tlf) set your publication.

  If you don't want to deal with possible download of the tlf swz, add it to your swf (which will increase the file size of the swf file of your tlf by about 230kb) in the publication settings: file/publication settings/flash/actionscript settings/DURATION of the parameters of the library shared.

• Mail creates a new contact for already existing contact card

  I recently find cards duplicate in my contact list that were apparently automatically created sort of correspondence. If I e-mail to Joe Blow, whose address is [email protected] in my Contacts, the e-mail address will be displayed without the name attached to it. The courier will say "to: [email protected]"instead of "Joe Blow.". " I'm in my contacts and see the two cards, one with the name and address and whatever other information that I have to contact and a second map which is completely empty except for the e-mail address.

  I had two recent changes. I upgraded from Yosemite El Capitan and my employer like us all on a Microsoft Exchange Server. As far as I know, the problem above isn't to Exchange. I see them duplicate that in my Mac app Contacts contacts, not in the list of Contacts online for the Exchange.

  If anyone knows what is happening and how I can stop the Contacts for the creation of new maps for already existing contacts, I'll be very grateful to hear from you.

  Rob

  Please open Contacts preferences window and select the general tab, uncheck the box marked

  See the establishment of contacts in the mail

  See if there is an improvement.

• I'm unable to watch videos on a certain type of site. They all now say, 'file not found '. They worked until I added a router for my Kindle Fire.

  I used to be able to watch videos on a certain type of site now all say file not found windows vista. I recently added a router for a kindle fire

  original title: streaming videos

  Hello

  ·          Do you mean that you use Internet Explorer 6 in Windows Vista?

  Windows Vista Internet Explorer 7 default features.

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

• When you add a new site, Keychain prompt for all existing sites

  With 2015 CC update, when I add a new Dreamweaver site, as soon as I hit him "done" once all the ftp information is entered, I get a prompt Keychain for each existing site, I saved in Dreamweaver: "Adobe Dreamweaver CC 2015 wants to use your confidential data stored in 'Sitename-SiteServer 1' in your keychain. You want to allow access to this point? »

  I was well with crossed the first steps, assuming it wouldn't ask me once again, but he does. Every time.

  By clicking on 'Always allow' vs. 'Allow' does not seem to do much, but I don't want to test it a lot because I have to go through 80 + sites every time to see if it changes anything.

  Any experience with this? Is it a thing of access door key or a thing of Dreamweaver?

  The note of the problems at the FTP credentials won't be remembered is NOT my problem. All credentials are stored; I can switch between all sites without problem, or any guest. This happens only when I add a new site.

  Any help would be greatly appreciated!

  Dreamweaver CC 2015

  Screen Retina MacBook Pro mid 2012
  Yosemite 10.10.3

  This will help to get rid of it helps Dreamweaver | Set up a test server

• our company had Adobe CS 3, we ship adobe creative cloud member of more than 2 years now. How can I get credit for the existing customer.

  our company had Adobe CS 3, we ship adobe creative cloud member of more than 2 years now. But we must all credit for the existing customer.

  There is no current discount for loyal customers.  You must have missed the opportunity to get a discount at the end of May.  Before that if you were an owner of Creative Suite, you can get the first year at a reduced rate.

• I want to download the HTML code for an existing site, and then revise in Muse. Is this possible?

  I want to download the HTML code for an existing site, and then revise in Muse. Is this possible?

  An existing site HTML files can be reused in Muse as Muse only works with files having the extension as .muse.

  However, you use apps like Dreamweaver to edit your existing HTML files.

• How to change the PCTFREE parameter for an existing table

  How to change the PCTFREE parameter for an existing table?
  
  Guys can you help me please

  Hello

  Of course it is possible.
  In this case you would export the table from the database (using old style exp)
  Start the import with the index_file option to generate the table/index instructions
  Modify the file created and updated the PCTFREE and remove any that need to be performed (default, if I remember correctly, he comments on the statements of the Index)
  Run the file for the table and the index created
  After that start the import with the option "ignore = yes".

  Make sure that you export only this particular table using "tables =
  Also in importing the "ignore = yes" will also be important data that still exists.

  In my view, however, this is not what you want to do. It's more complex, sensitive failure and the table should be deleted, so users are affected unnecessarily long.

  Success!
  FJFranken

• AS3 preloader for a SWF with document class

  Hello

  I created 1, 5 MB swf file and I need of preloader for it. I don't have the code for any scenario in there. All written in OBJECT-oriented programming, based on the document class. I caught a preloader to my previous projects, but this one does not. The output is: ' TypeError: Error #1009: cannot access a property or method of a null to myDocumentClass() object reference '

  Basically, I want to load swf in my swf preloader or all that will work. I tried to add loaderInfo to my document class but complete event not triggered when everything is loaded, and nothing that before. Just a white screen.

  How to load my large swf with document class in preloader.swf?

  Strange that you don't get line numbers in error when running in debug mode. Try to enable debugging in settings of publication-> SWF-> Advanced-> permit debugging.

  Another strange thing is that error that says ' DocumentlClass()' but your document class is called 'CarouselClass '.

• Media, recovery waiting for thread 1 sequence (in transit)

  I have rebuilt our standby database using rman double since it lacked many newspapers of archiving.
  
  After the double, the eve is now almost in sync with the primary. The Marbles that ship through, but are not implemented in a timely. How long should wait to a journal of the Archives of the primary to be applied to the waiting?
  
  I need to know this so that a good script can be configured to check the primary and standby. For the moment, that they are never exactly synchronized - sequence always one behind the primary number.
  
  Why is Eve does not have in a timely fashion?
  
  From the journal of alerts:
  
  Media, recovery waiting for thread 1 sequence 11278 (in transit)
  
  The journal seems to be "in transit" for a long time
  
  PRIMARY:
  SQL > select max (sequence #) the journal of v current_seq $;
  
  CURRENT_SEQ
  -----------
  11278
  
  
  SB:
  SQL > select MAX (SEQUENCE #), APPLIED from V$ ARCHIVED_LOG in case of APPLICATION = 'YES' GROUP APPLIED;
  
  MAX(SEQUENCE#) APP
  -------------- ---
  YES 11277
  
  
  JOURNAL ALERTS:
  RFS [2]: Archived Log: ' / backup/prod/log_1_11277_704816194.dbf'
  Primary database is in MAXIMUM PERFORMANCE mode
  Mon Nov 1 15:22:01 2010
  Recovery Media Log /backup/prod/log_1_11272_704816194.dbf
  Mon 1 Nov 15:26:49 2010
  Recovery Media Log /backup/prod/log_1_11273_704816194.dbf
  Mon Nov 1 15:29:54 2010
  Recovery Media Log /backup/prod/log_1_11274_704816194.dbf
  Mon Nov 1 15:34:18 2010
  Recovery Media Log /backup/prod/log_1_11275_704816194.dbf
  Mon Nov 1 15:36:42 2010
  Recovery Media Log /backup/prod/log_1_11276_704816194.dbf
  Mon Nov 1 15:39:43 2010
  Recovery Media Log /backup/prod/log_1_11277_704816194.dbf
  Mon Nov 1 15:42:34 2010
  Media, recovery waiting for thread 1 sequence 11278 (in transit)
  
  I should add that I understand that for the primary and standby to be interrupted by a newspaper is not a concern (they ask). It's just that I wanted a check that compare the two script and at the time where they are never equal - when I understand them to be, and that newspapers should apply almost immediately.
  
  Published by: Dan on November 1, 2010 16:36

  How long should wait to a journal of the Archives of the primary to be applied to the waiting?

  also depends on the speed of the network.
  Make sure that the archives are shipped instead of sleep.

  PRIMARY:
  SQL > select max (sequence #) the journal of v current_seq $;
  CURRENT_SEQ

  11278 (it's not connect archivelog)... :)

  SB:
  SQL > select MAX (SEQUENCE #), APPLIED from V$ ARCHIVED_LOG in case of APPLICATION = 'YES' GROUP APPLIED;
  MAX(SEQUENCE#) APP

  YES 11277

  Hi check MRP starts or not?
  database principal that you must not check the current sequence, generated check last sequence... not common sequence.

  current sequence is redo log, which has not yet been archived

  I think that everything is perfect here... no problems.

  Hope you understand, I would like to know if it is not explicit, thank you.

• Preloader for loadMovie in AS2?

  Let's start first of all, please do not recommend changing to AS3 for this. It is much too late for that and not my project to be dictated.

  I'm so load some external swf with the command loadMovie, according to the normal procedure with a button:

  on (release) {
  
      loadMovie("swfs/example-1.swf", _root.container);
  
  }

  But what I need, is to hold a preloader in there somehow. As sovereign wealth funds are about 1 MB each.

  I already use the following as a preloader for the main file, so an adaptation of it would be welcome, so I can coordinate the graphics:

  var amountLoaded:Number = _root.getBytesLoaded() / _root.getBytesTotal();
  
  preloaderText.text = Math.round(amountLoaded * 100) + "%";

  ---

  if (_root.getBytesLoaded() == _root.getBytesTotal())
  
  { gotoAndPlay(3); }
  
  else
  
  { gotoAndPlay(1); }

  Then there is a way to get my preloader in this first batch of code?

  you use a movieclip button, not a real button.  use:

  on (release) {}

  _parent.preloadI = setInterval(_parent.preloadF,100,_root.container)
  loadMovie ("Fund sovereigns/example - 1.swf", _root.container);
  }

  function preloadF(container:MovieClip)
  {
  var amountLoaded:Number = container.getBytesLoaded () / container.getBytesTotal ();
  preloaderText.text = Math.round(amountL*100) + '% ';
  If (container.getBytesLoaded () is container.getBytesTotal () & container.getBytesTotal () > 0)
  {
  clearInterval (preloadI);
  }
  }