Adding a vlan to a group of vmnic on a Virtual Switch
Hey guys,.
I got in trouble, adding a vlan to vmnics0-3. I tried to add a Virtual Machine with the correct ID port group of Vlan. I also tried adding a VMkernal Port with the Ip address I want in this vlan. But still, the VM on the host can communicate with anything and is not picking up a valid IP address. Any ideas?
Hi, uplinks that are connected on the switch, set up at the trunk are the VLAN on ports?
Tags: VMware
Similar Questions
-
Users added to the local Administrators group accounts
Hello
In our area (win server 2008 / r2) the logged on user object on some clients (windows 7) is added to the local administrator group.I can't find the reason for this.We have configured restricted groups in the strategy group and after gpupdate/force, the user is removed from the group yet (but administrator rights keep until the next logon).Affected, it's always only the user who is logged on the client.Of course, I checked the logon scripts, nothing that could trigger such behavior.Does anyone have an idea how this could happen?Thanks in advance,IngoHello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Hope the above information is helpful.
-
Power CLI script to add multiple VLANs with port group name in an ESX cluster
Hi all
Can someone help me get a script adds several VLANs with port group name in an ESX cluster?
Kind regards
Suresh
OK, so you just need to do an Import-Csv inside the loop and change the variables accordingly.
What is the provision of this CSV file?
-
How can I assign some VLAN in Virtual switch?
I have ESX 4.0 installed on two IBM Blade hosts that are in a HA cluster to enable vMotion. I have a virtual switch created on each host. Virtual machine connect to the same switch. I added a new virtual machine to on one VLAN separated. I have a few "How to"... questions:
1. How can I put the new virtual machine in an assignment of VLAN different from other virtual machines? (I think it's through groups of ports but I always read)
2. can I put several VLANS on the whole virtual switch? (If Yes, what is the snytax? "43; 40 "or"43, 40' or "43-40")
3. What is the best practice for this kind of Setup?
Thank you
Stuart
Hello and welcome to the forums.
1. How can I put the new virtual machine in an assignment of VLAN different from other virtual machines? (I think it's through groups of ports but I always read)
Port groups - you're right. Create a port group, and then assign the virtual machine this connection.
2. can I put several VLANS on the whole virtual switch? (If Yes, what is the snytax? "43; 40 "or"43, 40' or "43-40")
Yes, you want to create a new port group for each VIRTUAL LAN required in the vSwitch.
3. What is the best practice for this kind of Setup?
There is a lot of information around this in the Guide de Configuration ESX.
Good luck!
-
Hello
I'm get inter vlan routing to work on a 300-24 ports switch DF. I have a network of business existing on 192.168.111.0 and want to create a vlan on 192.168.1.1 which can talk to 192.168.111.0. I activated the layer 3 routing on the switch through the console and also provided ip routing commands. I have the following VIRTUAL networks:
Vlan1 - default 192.168.111.0
VLAN2 - 192.168.1.0
I turned on DNS and provided my two servers DNS 192.168.111.82 & 192.168.111.212.
I updated the VLAN1 interface 192.168.111.217 and VLAN2 interface 192.168.1.1.
The FE1 - FE15 ports are access ports and assigned to VLAN1 (unidentified)
FE16 - FE24 ports are access ports and assigned to VLAN2 (unidentified)
I put a default route for the switch to 0.0.0.0 0.0.0.0 192.168.111.254 (router Draytek 2600). I have connected a computer (A) at the port of VLAN1 FE3 and a computer (B) to VLAN2 FE16 port. I put its IP address and computer default gateway has to 192.168.111.217 to 192.168.111.94. I updated computer B default gateway 192.168.1.1 and 192.168.1.2 IP.
Computer A has access to the Mdaemon Server files via the network grows but no internet (cannot ping google) and can ping computer B and RDP on computer B.
Computer B can ping computer A and RDP on A computer but do not have access to the company network i.e. MDaemon, file server etc. It can also access the internet.
The console I can ping www.google.co.uk and all the ip addresses in the network of the company i.e. 192.168.111.82 (DNS server). I do not understand what I am doing wrong and have been banging my head for staretd a few days a new job and desperately need to work so any help would be greatly appreciated
If I have computer scanner a wireshark wirh internet starts working wheird!
Show the configuration below:
switch7c0a71 #show run
database of VLAN
VLAN 2
output
Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___
Add a voice vlan Yes-table 00036 b Cisco_phone___
Add a voice vlan Yes-table 00096e Avaya___
Add a voice vlan Yes-table 000fe2 H3C_Aolynk___
Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone
Add a voice vlan Yes-table 00d01e Pingtel_phone___
VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075
Add a voice vlan Yes-table 00e0bb 3Com_phone___
interface vlan 2
IP 192.168.1.1 255.255.255.0
output
interface vlan 1
IP 192.168.111.217 255.255.255.0
output
IP route 0.0.0.0 0.0.0.0 192.168.111.254
interface vlan 1
no ip address dhcp
output
Hello interface range vlan 1
hostname switch7c0a71
No complexity of passwords allow
No server snmp Server
interface fastethernet1
switchport mode access
output
interface fastethernet2
switchport mode access
output
interface fastethernet3
switchport mode access
output
interface fastethernet4
switchport mode access
output
interface fastethernet5
switchport mode access
output
fastethernet6 interface
switchport mode access
output
interface fastethernet7
switchport mode access
output
interface fastethernet8
switchport mode access
output
interface fastethernet9
switchport mode access
output
interface fastethernet10
switchport mode access
output
interface fastethernet11
switchport mode access
output
interface fastethernet12
switchport mode access
output
interface fastethernet13
switchport mode access
output
interface fastethernet14
switchport mode access
output
interface fastethernet15
switchport mode access
output
interface fastethernet16
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet17
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet18
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet19
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet20
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet21
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet22
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet23
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface fastethernet24
switchport mode general
VLAN allowed switchport General add 2 unidentified
output
interface vlan 2
name of development
output
Hi Richard,
43 - permit Protocol: any / all
42 - Protocol deny EVERYTHING 192.168.2.0 0.0.0.255-> to 192.168.111.0 0.0.0.255
41 - Protocol to deny ALL 192.168.111.0 0.0.0.255-> to 192.168.2.0 0.0.0.255
40 allow the RDP Protocol TO ALL
etc.
To block everything, including MSSQL, with the exception of the RDP and other ports that you defined above. The other defined are simply not the RDP Protocol and service work?
Richard, do note useful messages and identify the right answers.
Best,
David
-
Hello
I am trying to write a Perl script that can modify the security policy of a group of distributed in a distributed virtual switch ports. I can access the values of security policy by using the following:
$port_group_view-> config - > defaultPortConfig-> securityPolicy - > allowPromiscuous-> value
$port_group_view-> config - > defaultPortConfig-> securityPolicy - > forgedTransmits-> value
$port_group_view-> config - > defaultPortConfig-> securityPolicy - > macChanges-> value
I try to use the method ReconfigureDVPortgroup_Task() of the managed object DistributedVirtualPortGroup. While creating a new instance of DVPortgroupConfigSpec, within the data spec config defaultPortConfig property object there is property of security policy and I couldn't find any other property pointing me to that I can update the security policy. I discovered that it is accessible via defaultPortConfig, stretching from VMwareDVSPortSetting where securityPolicy is a property of VMwareDVSPortSetting.
What is the way to update? I am bit confused about terminology Extends and extended by and how it relates to the other.
Concerning
Akmal
It is in DVPortgroupConfigSpec, but you will need to use the extended VMwareDVSPortSetting object.
My $dvpg_spec = new DVPortgroupConfigSpec();
$dvpg_spec-> {defaultPortConfig} = new VMwareDVSPortSetting();
$dvpg_spec-> {defaultPortConfig} {securityPolicy} = new DVSSecurityPolicy();
$dvpg_spec-> {defaultPortConfig} {securityPolicy} {allowPromiscuous} = new BoolPolicy (value-online 1, inherited-0 online);
$dvpg_spec-> {defaultPortConfig} {securityPolicy} {forgedTransmits} = new BoolPolicy (value-online 1, inherited-0 online);
$dvpg_spec-> {defaultPortConfig} {securityPolicy} {macChanges} = new BoolPolicy (value-online 1, inherited-0 online);
You could probably simplify this by getting the config spec VGA and change it before using it in the ReconfigureDVPorgroup_Task() method.
-
command line change VLAN ID in virtual switch
The trunk on our central office switch port has been changed. So now, I can't reach my esx server in virtual center.
I would like to change the VLAN ID of the service on the virtual switch to 500 console.
Anyone know which command I should use.
THX
Rik (Belgium)
go to the server and type: esxcfg-vswitch vSwitch0 Pei "Service Console" - v 500
Duncan
Blogs: http://www.yellow-bricks.com
If you find this information useful, please give points to "correct" or "useful".
-
Adding table to an existing group
I am trying to remote installation wizard allows you to add a PS6210x to an existing PS6000 with a PS6210xs group. I have successfully added tables the same group with RSW in the past, but I get an error this time on a bad group password. I logged in with this password manager, so I know that it is correct.
The new table has firmware 8.1 and tables in the existing group always run 7.1.x. Is it possible that in fact is the problem and I just need to update the old firmware to table first?
Thank you.
1. you use the user 'grpadmin' to connect to the GroupMgr, but this password may be another. Especially over a long period a customer may change the password for grpadmin but forget to change the GroupPW.
Within GrpMgmr klick on group-> Member-> Set Password to set a new GroupPW. You don't need to know the old man!
2. Yes, at the end of the day all members must be at the same level of FW, but this should not be your problem right now.
We upgade existing members first of all for the course prior to FW, adding new members. We are also new members in a 'maintenance' pool to be sure that no data migration starts automatically.
Kind regards
Joerg -
Hi all
I'm getting more confused by the minute. I have a pair of M8024-k blade switches in a M1000e enclosure, outside, I have a pair of N3048 switches.
I think I have the job of stacking on the M8024-k, but I found a configuration guide for Simple mode that says take port 17-20 outside the Group of ports on the pair aggregation and leave the stack ports and internally in the PA Group. When I do that they remain outside the group, if I do it in the CLI or the GUI.
Does anyone have a configuration guide that shows how I can pair trunk the 2 together and allow 4 VLAN that I keep coming without access to blade servers inside? What I get out of simple mode on the M8024-k to achieve?
Any help gratefully received.
The best source of information is going to be the user guides.
I would wear the 8024-k off simple mode.
Console
# not simple mode On two batteries, you will need to aggregate 4 ports together. Here is an example to place a port in an aggregation group.
Console (config) # interface gigabitethernet 0/1/5
Console (Config-if-1/0/5) # channel-group mode 1 (active / Auto)
Once the ports are in a channel-group 1, we can then configure the channel group to perform for several VLANs.
Console (config) # interface port-channel 1
trunk mode console (config-if-po1) #switchport
#switchport console (config-if-po1) trunk allowed vlan add 2-150
This is done, you should have connectivity.
Keep us informed.
-
Adding Port, Tags and IP groups varies - impact on the VMS?
We need migration of virtual machines to a different environment due to necessary maintenance SAN. A colleague in another Department has offered to temporarily move VMs to its environment. Looking at its systems, we need to add a new group of port, add our range of IP addresses to the NICs and tag his current group of port, because it is without label. I think that this should not affect its virtual machines that are running in production, but am not 100% sure, so I ask confirmation. We appreciate his willingness to help and don't want to do anything that would affect its systems. Thanks in advance for your replies.
Ann8 wrote:
If you are sure that we can create the necessary tagged group without problem and do not have to worry about its original port of marking group
This will depend on a bit of the physical switch, but you can almost certain make the port physical switch carry VLANs marked (called a "trunk" on Cisco devices) and use one untagged VLAN per port, which will be his old trade, known as the vlan "native" of Cisco.
-
Adding members to an existing group
I would like to know if I add a member to an existing table if I lose all the data on this new Member?
Found this doc online and I can see that we need to define a new RAID policy so, bad news? I will lose data on my second Member?
Thanks for your help!
- psonlinehelp.equallogic.com/.../adding_members_to_an_existing_group.htm
Hello
Well the new Member has no data yet, but it will not affect the existing Member.
When you add a new Member, it gets attached to the default pool. However, without a RAIDset it does provide no data to the Group again.
First decide if you want to add this member to the existing or to put it in its own pool.
Assuming that the existing version is in the default pool and you want to add it to the default pool.
You must activate all Ethernet iSCSI ports, and then select the RAID type for this member. There is a box to make the space available immediately. I prefer not to check that... This allows the RAIDset fully complete the building before making the space available. If no data will migrate the existing member until then.
If you want it in its own pool. Create the pool, select the new Member and under Member settings, you can select the pool and it will move it there. Then repeat the above. Configure the network interfaces, and then select the RAID policy.
When you add a new Member, you will need the password to 'membership '. Which may or may be not the same as the GRPADMIN password. When the Group has been set up, he asked first for the password.
Kind regards
Don
-
Error when adding new subnet for CSM group
Hello
I'm trying to add a new subnet to an existing group in the CSM v4.0.1 b7823 company. When you add a new subnet to the Group (the other elements of the group is a different subnet), CSM emits several errors for each SAA touched:
Description:
BB (GROUPNAME), referenced by the 'Http network' on maps (DEVICENAME) device to multiple network IP addresses!
Cause:
Made http refers to a network object that corresponds to more than one IP address on the device
Action:
Please config the policy with the network object that resolves to a single IP address.
There is an error for ICMP as well. The group is already a /24subnet content, I don't think it's a clear mistake. Has anyone encounter this?
Thank you very much.
Justin
Hi Justin,
what you observe is normal given the way in which we have set up the remote access policy. As you probably know, in cli, you can specify only one rule of access by line for ssh, http, telnet etc...
For example, if you want to allow ssh access to ASA lines host 1.1.1.1 and 2.2.2.2 you put two
SSH 2.2.2.2 255.255.255.255 outside
SSH 1.1.1.1 255.255.255.255 outside
The CSM, we model this two lines as two different object, so the building of network type block object that refers to the object of type ssh access can have only one entry. This behavior is the same for ICMP as well.
Access list is different because we model to the CSM in a different way, plus you can use the object-group put on different networks. It is not possible to access to the device.
I hope that gave you an overview a little more on the reason
Also it would be nice to score this answer if this is the case
Stefano
-
Added option inlines for each group
Hello
< A1 >
< B1 >
ABC < C1 > < / C1 >
def < C2 > < / C2 >
< C3 > 123 < / C3 >
< / B1 >
< B1 >
ABC < C1 > < / C1 >
def < C2 > < / C2 >
< C3 > 456 < / C3 >
< / B1 >
< / A1 >
From the example I show o/p as above: 123 456 and here I have to add a condition to check also the empty spaces. So I tried two solutions below.
= PlanA:
<? for-each@inlines:C3? > <? ? >
<? xdoxslt:IfElse ((position () = last (), ",",")? >
<? end foreach? >
(1) with above approach I'm not able to check the empty spaces! output can be shown as: 123 456
OR
= Plan B:
<? for-each-group: B1; / C3 >
<? C3? >
<? If @:(C3='') rank? > <? xdoxslt:IfElse ((position () = last (), ",",")? >
<? end if? >
<? end for each group -? >
With above approach am able to check the empty spaces, but the output is coming up as below.
123
,
456
(2) then how can I show this in a single line. ?
Thank you
Rajesh
Can be?
.???>
-
Adding a competitor to a group of request with FNDLOAD
Hi gurus...
I add a new competitor to a group of application that already exists.
Definition of this competitor has been downloaded successfully to the environment of production using FNDLOAD
Now, I want to add this competitor to the request using FNDLOAD group
Option 1 - transfer to production environment this unique addition to the Group of demand.
Option 2: definition of Group of any download with the new simultaneous addition request
What should I do?
In the case of Option 1... How my FNDLOAD should look like, both for download and download?
Thanks in advance
OscarIf you change objects that are sown, future corrections back your changes.
You will need to download the simultaneous program definitions and the application group, and then load them into the target instance - which means that the levels of EBS patch on source and target texts are identical.
The other option is to download the definition of competitor program only, the same Uploader in the target, and then manually add the concurrent program in the application group
HTH
Srini -
Looking for advice.
Currently, I have our Vmware 4.0 servers configured with 4 NICs. vSwitch0 (2 network cards) and vSwitch 1 (2 network cards). Switch 0 to several groups of ports for each vlan I have (on 8 VLAN) switch 1 a the VmKernel for NFS. It works very well, I have a new server on order and I thought that I have would consider this configuration to make sure that I am maximimzing my performance.
I get a little confused, it seems that I could create multiple vSwitch with the same NIC 2 and have a group of ports under each of them for the Vlan vs 1 vSwitch and several groups of ports. If this is incorrect, please correct me.
Benefits or drawbacks to this?
If you had 4 network cards and several VLANs using NFS for storage, which would be the best config for performance and failover?
What happens if I had 6 network interface cards (new server comes up with 6)?
Thank you
Take a look on:
Best practices for the design of cards and vSwitches NIC
Note: a NETWORK adapter can be connect only to a vSwitch, not for many.
André
Maybe you are looking for
-
HP recovery discs - Vista - can be installed on a smaller drive?
HP M9340D Windows Vista bits. Original HD was 750G. Can I use a low cost from 500G to reinstall using system restore disks? System Restore had no problem overwhelming on a WD 1 TB disk partitions (I don't know the resulting size because it wasn't in
-
For loop creates 1 d data table
Hello, I am building the circuit below, and I'm running into a lot of problems with the loop, creating a table 1 d of data from certain types of data such as the ERROR OUT and the VISA NAME of RESOURCE. I understand why it does this, but I only need
-
How do you keep a message from Inbox disappear on your laptop after you read that on the desk?
Original title: messages received How do you keep a message miscare disappear at the top of a tower, after you read the desktop
-
Original title: Reinstall windows xp on the computer and cannot find my produst key suggestions I am reinstalling a version update of xp on my computer and can't find the product keys doe someone at - it suggestions?
-
OfficeJet 6700 flashes under the scanner cover
The light continues to blink when the lid is down on the scanner. Is this normal? The sales representative at the store said it should not. It seemed that it was not in the store, so I exchanged for a new one, but when I traded my printer, it did the