adding data to a table

Hi need help... I need to add the missing data to the table

YY-year

MM-month

DD-Date

mm-minutes

SS-seconds

Mmss0 of 1YYMMDD of data

20.8. 1090828 05050
1.2 1090829 10150
7.2 1090901 08400

the above table is the data where I need to insert data for data til 090831

as below

Mmss0 of 1YYMMDD of data

20.8. 1090828 05050
1.2 1090829 10150

0 1090830 0

0 1090831 0

7.2 1090901 08400

How to do this? and I need to check for each month is there data missing inbetween? Help, please

Yes.  You need to browse your table.  The index of the current index and index + 1.  Translate the text dates, and use the date functions to determine if a date is missing.  If this isn't the case, increase the index of 1, and repeat.  If a date is missing, insert a row and setting the date of the last date + 1.  Repeat raising your index which should make the line that you just added.

Tags: NI Software

Similar Questions

  • Adding data to the existing Table

    Hello..

    IAM, try to import the oracle dump file. but the tables in dump files already exist in my database. How can I add data to existing tables... pls suggest me.

    Thank you.

    You don't say what you use the tool...

    If you use the traditional import utility (imp) then you can tell him to ignore the fact that there is already a table: IGNORE = Y.

    And I can't import datapump has similar features.

  • How to add data to the table changed in sql developer at Apex and vice versa

    Hello

    I had tables of database with sql developer. But now, I have modified the database (new tables added + changed the data in the tables). However, in the Apex, I the old database. Is it possible to get the new Apex database with the data of the table changed so this database in both places (sql and apex developer) is exactly the same... Also the other way around.

    Thank you

    The database schema that contains the tables, is it associated with the workspace even you are searching through the APEX product t development?  Why I'm asking is, if they are the same schema, the tables that you MODIFIED should be appear in the sql for APEX workshop part.  Now reports and forms will NOT see the changes (unless you have actually added or updated definitions for column).

    Can you explain what exactly you were doing the SQL Developer to the tables in your schema?

    Thank you

    Tony Miller
    Los Alamos, NM

  • How to copy data to a table row fixed to 1 of the 2 summary tables

    You are looking for a solution copy specific data from a table of Inspection (which has a fixed/pre-determined number of lines) to 1 of the 2 summary table (has or B).

    Think of it as a form of Inspection:

    Each row in the table of Inspection with have a [Topic] inspected item field and and a drop-down menu to indicate the point whether or not inspected. If the user selects "Yes" for past, nothing happens. However, if the user selects "No" for not, an alert will be pop up asking if the topic should be added to the summary table A or B (perhaps through xfa.host.response).

    Once the desired table is specified, the data of the subject field (from the current line of control) get dynamically add (new line) for the summary table shown. Note: the first field of each line of the or of analytical tables will have a topic area where will fill the data copied from the section (from the Inspection table).

    That the inspection form is completed, the same process will occur as described above... for all the answers 'No', new lines should be added dynamically to the analytical table appropriate to the need (one for each "no" answer and auto-generated topic text).

    Make sense?

    Is this possible, or too complicated to achieve?

    Thanks in advance!

    Have a look here.

    Kyle

  • Inserting data from one table to another table

    Hello

    I have the following SQL where I am updating a table by adding new data from another table, but without success.

    INSERT INTO
    () TOP_PROSPECTS
    COMMON_ID
    DATE_ADDED
    REVIEW_RANK
    EVAL_DATE
    PM_ASSIGN
    WHY_NOTES)
    SELECT
    t.COMMON_ID
    t.DATE_ADDED
    t.REVIEW_RANK
    t.EVAL_DATE
    t.PM_ASSIGN
    t.WHY_NOTES
    Of
    TEMP_IVAN_MARY t
    WHERE
    COMMON_ID <>t.COMMON_ID

    Any suggestions?

    Thank you.

    Published by: user13822709 on August 14, 2012 09:14

    Published by: user13822709 on August 14, 2012 09:15

    Is that what you're trying to do with the insert. I think there may be a sign {noformat}<{noformat}{noformat}>{noformat} missing in the where clause. This site eat those, so you need to use the equivalent! = post here.

    If I'm wrong about the missing trader, then it looks like you want to insert rows in temp_ivan_mary that are not already in top_prospects. If Yes, then you need something like:

    insert into top_prospects
   (common_id, date_added, review_rank, eval_date, pm_assign,
    why_notes)
select t.common_id, t.date_added, t.review_rank, t.eval_date,
       t.pm_assign, t.why_notes
from temp_ivan_mary t
where t.common_id not in (select common_id from top_prospects
                          where common_id is not null)

    Function index and data available volumnes etc. then a mergr can be more effective. Something like:

    merge into top_prospects p
   using (select common_id, date_added, review_rank, eval_date,
                 pm_assign, why_notes
          from temp_ivan_mary) t
   on (p.common_id = t.common_id)
   when not matched then
      insert (common_id, date_added, review_rank, eval_date, pm_assign,
              why_notes)
      values (t.common_id, t.date_added, t.review_rank, t.eval_date,
              t.pm_assign, t.why_notes)
from temp_ivan_mary t

    John

  • How to write a simple select query to get the data of the table as an XML.

    How to write a simple select query to get the data of the table as an XML. In the query, I'm just adding items below which i need be there in the XML document
    select '<test_tag>'||EMP_NAME||'</test_tag>','<date>'||sysdate||'</date>' 
from temp_table where id_num BETWEEN 1 AND 10;
    I have need to add the root tag as well in the beginning and the end of < root > < / root > this xml file. Please advice if this is possible with the select query
    without using XMLGEN, XMLQUERY or any other packages built and function?

    I need to URL escapes with the UTF-8 code points that we have already achieved using the utl_http package. Please help how to do that without using the utl_http package.

    What is wrong with him?

    At present, the only way I can think of to avoid a call to UTL_HTTP. SET_BODY_CHARSET is to write your own little wrapper.
    In this way, you can specify the Boolean parameter or omit it if you choose to use named parameters:

    SQL> create or replace function my_url_escape (url in varchar2)
  2  return varchar2
  3  deterministic
  4  is
  5  begin
  6   return utl_url.escape(url, false, 'AL32UTF8');
  7  end;
  8  /

Function created

SQL> select my_url_escape('http://some.uri.com/param?lang=fr&text=contrôle') from dual;

MY_URL_ESCAPE('HTTP://SOME.URI
--------------------------------------------------------------------------------
http://some.uri.com/param?lang=fr&text=contr%C3%B4le

  • The fastest way to import data for large tables

    Hi friends,

    I recently joined a billing product put up a team for TELECOM giant. Under the procedure of installation/initial tests, we have huge data (size of almost 1.5 billion records / ~ 200 GB of data) in some tables. Currently I use impdp to import. It takes a long time (almost > 9 hours to load these data).

    I tried the ways below to import the data (all of these tables is partitioned):
    1. normal impdp (single thread that is, parallel = 1): it takes a long time (> 24 hours).
    2. normal impdp but partition-wise. It was completed in relatively less amout of time compared to the 1st method.
    3 fall drop the index, framed adding another scheme in the same forum that includes data, and then recreate the index (whole process takes about 9 hours)

    My questions at all:
    1. is there any other way/trick in the book that I can try to put the data in less time
    2. what I pointed out that even if I give parallel = 8 or more, sometimes parallel workers are laid and sometimes not. Can someone tell me why?
    3. How can I come to know (before running the impdp) that my parallel article will spawn parallel workers or not. As to how I will come to find out, I searched this topic but without success.


    I don't know what strategy to follow, because it is an involved and repetitive task for me. Because of the task above, I am not able to focus on other DBA tasks because of what comes to me.

    See you soon,.
    Malika

    assuming that you have a table with 3 clues, then create a script for each index (reblace index_name_n with your index name) and start them at the same time, after the importation of the table is complete

    DUMPFILE= or NETWORK_LINK=
DIRECTORY=DATA_PUMP_DIR
LOGFILE=
CONTENT=ALL
PARALLEL=1
JOB_NAME=IMP_
INCLUDE=TABLE_EXPORT/TABLE/INDEX:"IN('')"
TABLES=.
    Change the following settings when importing:
    increase pga_aggregate_target
    increase db_writer_processes
    db_block_checking = false
    db_block_checksum = false
    the value undo and temporary ts autoextend
    Set noarchivelogmode
    create logs of restoration of 4 GB
    HTH
  •  
		     
    Inventory of the data of all Tables in a database
     
			 Hello
    We do the analysis of the existing data base (Oracle 10 g) and I want to prepare an inventory of the data of all tables in a database that is
    

    1. total number of records in a table
    2. total number of records that have null values in a column
    3. total number of standalone tables IE have no connection with other tables
    etc...
    

    Please let me know if there are tools or query that can do these tasks.
    

    Thank you and best regards,
    Lokesh			 
    select owner "Owner",
table_name "Table_Name",
column_name "Column_Name",
initcap(data_type) ||
decode(data_type,
'CHAR', '('|| char_length ||')',
'VARCHAR', '('|| char_length ||')',
'VARCHAR2', '('|| char_length ||')',
'NCHAR', '('|| char_length ||')',
'NVARCHAR', '('|| char_length ||')',
'NVARCHAR2', '('|| char_length ||')',
'NUMBER', '('||
nvl(data_precision,data_length)||
decode(data_scale,null,null,
','||data_scale)||')',
null) "Type",
nullable "Nullable",
decode(to_char(num_distinct),
0,'No',
'YES') "Have Data",
owner sdev_link_owner,
table_name sdev_link_name,
'TABLE' sdev_link_type
from sys.dba_tab_columns
where (:OWNER is null or instr(owner,upper(:OWNER)) > 0)
and (:TABLE_NAME is null or
instr(upper(table_name),upper(:TABLE_NAME)) > 0)
and (:COLUMN_NAME is null or
instr(upper(column_name),upper(:COLUMN_NAME)) > 0)
and substr(table_name,1,4) != 'BIN$'
and substr(table_name,1,3) != 'DR$'
order by owner, table_name, column_id

    

    I added a new column with an alias "get data". This new column will display "NO" is the entire column is zero and 'YES' if there is even a value not null in the column. But caution is that statistics table must be updated to get the correct results.
    

    Thus, it may be useful to gather current statistics before executing the query.
    

    Exec dbms_stats.gather_schema_stats or even dbms_stats.gather_database_stats.
    		   
  •  
		     
    Migration of data from a table to another table
     
			 have a table1 that includes the existing data in the format.
    

    ~@!%~X1~@!%~Y1 in three different coulmns
    

    creates a new empty table and the need to migrate the data above, which is present in 3 different columns in a column in the new table, as shown in the example below.
    

    table 1 existing data (| separator of columns for formatting)
    ------------------------------------------------------------------------------------------------------------------------------------
    ID name1 | Name2. Name3
    123 ~@!%~X1~@!%~Y1 | ~@!%~X2~@!%~Y2 | ~@!%~X3~@!%~Y3
    234 ~@!%~X4~@!%~Y4 | ~@!%~X5~@!%~Y5 | ~@!%~X6~@!%~Y6
    456 ~@!%~X7~@!%~Y7 | ~@!%~X8~@!%~Y8 |     ~@!%~X9~@!%~Y9
    

    

    Table 2, which will initially be empty and after migration, it should look as follows.
    

    ID name1
    ----------------------------------------------------------------------------------------------------------------------------
    123 ~@!%~X1~@!%~Y1 & & ~@!%~X2~@!%~Y2 & & ~@!%~X2~@!%~Y2
    234 ~@!%~X4~@!%~Y4 & & ~@!%~X5~@!%~Y5 & & ~@!%~X6~@!%~Y6
    456 ~@!%~X7~@!%~Y7 & & ~@!%~X7~@!%~Y7 & & ~@!%~X7~@!%~Y7
    

    as shown in the example above
    

    Name1 column has ~@!%~X1~@!%~Y1
    Column name2 has ~@!%~X2~@!%~Y2
    Name3 column has ~@!%~X3~@!%~Y3
    

    Once the data is migrating from table 1 for id - 123 looks like below, before joining data from 3 tables, I need apopend & & for each for the token I read of the tabl1 of name1 to end ii should be added "& &" also when I read the name2 I add "& &" at the end of the string before the concatination.
    

    Here's the sample that deals with data for id - 123 with & & (only & & other symbols are part of the data)
    

    ~@!%~X1~@!%~Y1 & & ~@!%~X2~@!%~Y2 & & ~@!%~X2~@!%~Y2
    

    need help in writing a note of migate
    

    Published by: [email protected] on April 2, 2010 15:42			 
    Hello
    

    You are looking for something like this
    

    CREATE TABLE table_new
AS
   (SELECT id, name1 || '&&' || name2 || '&&' || name3 name1
    FROM table1);

    

    or if you have the table ready
    

    INSERT INTO table_new
   (SELECT id, name1 || '&&' || name2 || '&&' || name3 name1
    FROM table1);

    

    Thank you
    

    Alen
    		   
  •  
		     
    data from 3 tables with later dates
     
			 Hello
    Need help with the PL/SQL code, I need to write a code that will get the data from 3 tables with the most recent date.
    

    For an individual ACT_CODE the output of the SQL query should display the data including the last dates back to 3 tables, if there is no
    Date of the table, it should show the remaining data (think that the left join will do here)
    

    
Names of tables:
    Institution_UPDT aiu
    AC ASQ_CONTACT
    GR_AUTHORIZE gr

    All 3 tables have ACT_Code in common
    

    
Column names
    

    
INSTITUTION_UPDT IAU - IAU. ACT_CODE, AIU.project_id as proj, IAU. UPDT_TYPE_ID, IAU. User_id, IAU. UPDT_DATE
    

    
ASQ_CONTACT ac - ac. ACT_CODE as contact_code, ac.project_id, ac.first_name, ac.middle_initial, ac.last_
    Name, AC.title, AC. Status, AC.status_date
    

    
GR_AUTHORIZE gr - GR ACT_CODE as grad_code, gr.name, gr.title AS grad_title, gr.submit_date
    

    

    
Are the names of the columns date
    AC.status_date,
    IAU. UPDT_DATE and
    Gr.submit_date
    

    Thanks to you all
    appreciate your help
    

    Jesh			 
    Hi, Ngoumba,
    

    If a given ACT_Code couldn't miss from any of the tables, then you will use better full outer joins, not a join left outer.
    

    Perhaps it would be more effective to make a UNION of the three tables, then rotate the results in three datecolumns.
    

    You can use the GROUP BY aggregation to get the last date for each ACT_Code in each table.
    If you need other columns in the row which is the last date, you can use the ROW_NUMBER analytic function, like this:
    

    SELECT  ACT_Code
,     updt_date
,     ROW_NUMBER () OVER ( PARTITION BY  ACT_Code
                          ORDER BY          updt_date     DESC
                  ) AS r_num
FROM    institution_updt

    

    The lines with r_num = 1 are the most recent
    

    This is a technique of ot the UNION-PIVOT example:
    

    WITH     union_data     AS
(
     SELECT    ACT_Code
     ,       MAX (updt_date)     AS last_date
     ,       1                  AS table_id
     FROM       institution_updt
     GROUP BY  ACT_Code
UNION ALL
     SELECT    ACT_Code
     ,       MAX (status_date)     AS last_date
     ,       2                  AS table_id
     FROM       ASQ_Contact
     GROUP BY  ACT_Code
UNION ALL
     SELECT    ACT_Code
     ,       MAX (submit_date)     AS last_date
     ,       3                  AS table_id
     FROM       GR_Authorize
     GROUP BY  ACT_Code
)
SELECT       ACT_Code
,       MAX (CASE WHEN table_id = 1 THEN last_date END)     AS aiu_updt_date
,       MAX (CASE WHEN table_id = 2 THEN last_date END)     AS ac_status_date
,       MAX (CASE WHEN table_id = 3 THEN last_date END)     AS gr_submit_date
FROM       union_data
GROUP BY  ACT_Code
ORDER BY  ACT_Code
;

    

    Published by: Frank Kulash, on September 16, 2009 15:02
    Added UNION-pivot example
    		   
  •  
		     
    Read xls file and display the data in the table.
     
			 
    Hello
    

    Try to read the data from an xls or csv file and fill the same data in the table. If I need to use the table to store the data from the file and display, hoping that someone could help.
    

    Thank you
    

    Hari
    			 
    Hi hari,.
    

    One thing that is very important when you use the Excel activeX interface (in case you need it) is good termination of worksheet/workbook/lettering handles.
    

    You need these handles to specify what cell in which file you are trying to access.
    

    If you are unable to throw each handle you have, then you will be left with ghost Excel process in your task manager, devours your system's memory.
    

    Thus, when debugging of your application, open the Task Manager and the watch as Excel treats created/destroyed and make sure that you end up with zero Excel process running when your application is closed.
    

    Also consider the case of fault for your program. Check that your exit routes did not omit any termination of handle.
    		   
  •  
		     
    back up my data on a table
     
			 
    Hello
    

    This morning, I lost all my week end test data. You know a procedure secure my data in the event of an accident of electricity?
    

    Attached my VI. I export my datas from the table when necessary...
    

    Thanks a lot for your support
    

    Rémi
    			 
    remi69330 wrote:
    

    This morning, I lost all my week end test data. You know a procedure secure my data in the event of an accident of electricity?
    

    

    Save a file on your hard drive.  You should do this anyway.  I recommend that you take a look at the producer/consumer and use the second loop to write the data to a file.
    		   
  •  
		     
    concatenate the data in 2 tables in a third table as well as in CONCATENATE strings
     
			 
    Hello. as the title says, I wish to only concatenate the data in 2 tables in a similar third table that concatenate strings don't. All tables should be 1 d. For example, suppose that there is 1 table with the following: 1. 2; 3; 4 and table 2 with:; b; c; d. I would like a table 3 either 1 a, 2 b, 3 c, 4 d. Now this could be done easily with above mentioned concatenate strings, then table construction. but table 1 and 2 have something like 150 items. Rather painful. Any ideas?
    			 
    Hold arrays of two strings in a loop for example, concatentate the strings inside the loop and run the result réécrirait array3.
    

    Autoindexing manages table manipulations.
    

    MIke...
    		   
  •  
		     
    Leak memory in a simple loop to save data in the table?
     
			 
    Hello world
    

    I'm trying to set up a simple code to read a certain amount of data in a table at a fixed sampling rate and put these data in a local variable.  I'll put this on one OR cRIO-9073 using the scanning engine and the data comes from one NOR 9208 with a speed of approximately 250 Hz scanning, even if it is not really important at the moment.
    

    I made this little test VI which I suspect contains a memory leak, but I'm not able to identify it.  The reason for my suspicion is that when I run the vi on a VMWare virtual machine (LabVIEW 2010 on Windows XP) it claims soon that it is short-term memory.  Of course, the problem is perhaps elsewhere, but I hope that someone more experienced with LabVIEW programming will be able to find all the bugs very easily because it is really a piece very simpel to code. :-)
    

    I have included a copy of the VI with a screenshot to illustrate.
    

    Regards, Martin
    

    PS my code looks a bit awkward, so if anyone has a better solution, I'd be very happy to learn about it!
    			 
    Hello Martin,
    

    I would try a different approach to your problem. Currently you reshape your table each iteration of the loop. This means that the allocator memory of LV must find a new piece of contiguous memory each iteration of the loop. You're probably fragment your memory and so short of contiguous blocks of memory, leading to the release of messages from memory.
    

    For these types of tasks, I recommend having an array of fixed size that you initialize outside the loop and then use the Replace table subset in the loop for updating the values. This avoids the problem of allocating memory you use in.
    

    Alternatively, since I assume that you use the local variable to pass data to another loop, you can use a FIFO RT to manage data. A RT FIFO resembles a queue of LV, but it is designed so that you can keep determinism in your application. Set up an acquisition loop that exports data from the 9208 every 4ms in a RT FIFO. Then set up your processing loop to run at a slower pace - say every 200ms. The processing loop reads all the elements of the FIFO until it is empty every 200ms or a number of samples. The RT FIFO is fixed size, if you need to make it large enough to contain at least 200/4 = 50 samples. For more security, you should do several times bigger, maybe 200 samples. You can try different sizes of the FIFO and also to the different periods of your processing loop to your application's specifications.
    

    Using this method you do not have to create a counter to track items, since the reading of FIFO function can tell you how many items is in the FIFO and also when it is empty.
    

    I recommend you the example of Communication of FIFO of RT which comes with LabVIEW to get an idea of how to use these functions.
    

    Gerardo
    		   
  •  
		     
    How can insert different types of data in the table?
     
			 
    Hello
    How can I insert different types of data in the table, (e.g., numeric and string) in the same index of a table.
    

    example:
    index0 car 10 green
    

    car red 11 index1
    Index2 car Blue 12
    

    where green car red and blue car as string and 10, 11 and 12 in the numeric form.
    then I extracted 10, 11 and 12 a digital table
    

    and, the green car, red car, blue car in a string array
    

    Help!
    			 
    Use 'Analysis of the chain' as in the picture as an attachment.  This will extract the number and color that you can add tables later.
    		   
    •  
          
    Maybe you are looking for
     
          
       
           
    •  
		     
      Firefox stores the IP address with bookmark?
       
			 
      When I open a Web site and save a bookmark of it, is recorded in a bookmarked favorite site IP address?When I create a bookmark without having to open a Web site, IP address is recorded when I open the bookmark?
       
		   
      •  
           
    •  
		     
      strange white border
       
			 
      My iPhone 6 has now a strange border white rounded edge with a small tab at the bottom. How can I get rid of him? Attached are some pictures. In horizontal view, it is very distracting.
       
		   
      •  
           
    •  
		     
      Lexmark S405 won't print web pages in Firefox while accepting others
       
			 
      However, I have no problem printing of emails. Lexmark tells me that this should be resolved in Firefox.
       
		   
      •  
           
    •  
		     
      BT adapter integrated into my S1?
       
			 
      Hello.. I read, can you tell me if a bluetooth adapter is integrated into my S1, if I tell you that the product-nr... So here it is: pt831e-67ct 7-gr Greetings from TIA Stefan
       
		   
      •  
           
    •  
		     
      Satellite M60: black screen; I can barery distinguish icons
       
			 
      HelloI have the laptop: Satellite M60.I wrote a document in Word. I left the room for a few minutes and when I got home that the computer was ready to launch the screensaver. I moved the mouse so that it start the screensaver that I wanted to continu
       
		   
      •