Adding interface routed in the State of dynamic routing
I have a 3560 which hangs a 6509. The next SVI s direct on the 3560:
192.168.181.1(VLAN 192.168.180.1 (VLAN 180), 181), 192.168.182.1 (VLAN 182), 192.168.183.1 (VLAN 183), 192.168.184.1 (VLAN 183).
I want to create the router eigrp statement that says:
Router eigrp 777
network 192.168.180.0 0.0.0.225
network 192.168.181.0 0.0.0.225
network 192.168.182.0 0.0.0.225
network 192.168.183.0 0.0.0.225
network 192.168.184.0 0.0.0.225
Now for the routed on the 3506 interface that is 192.168.0.17 can I create a statement of routing for the and it's as simple as network 192.168.0.17 0.0.0.3? What of the other side do I add network 192.168.0.17 0.0.0.3 in the instruction of network on the 6509?
Jon isn't that statement back? If it shouldn't be 192.168.0.16 0.0.0.3?
My mistake, you are right, it should be as you say.
Sorry about that :-)
Jon
Tags: Cisco Network
Similar Questions
-
Object state Multi pixelated when adding button to change the State of EPS.
Hello
I have a multi state object consists of a couple of eps files. They make very well on the iPad and you can zoom in on them and they stay sharp.
The problem I have is when I add a button that when clicked/tapped changes the DSO to the next State, it causes the eps be raster/bitmap when you zoom in above.
Is he here to add a button while retaining the DSO as vector objects remain strong when zoomed in?
Thanks in advance.
The DSO has vector?
Regardless, EPS is a horrible archaic format that can cause problems in just
any workflow. Open them in Illustrator and re-save AS. Link back to the
Files HAVE.
-
Adding custom flags to the TestStand UI user interface
Hello! I'm sure this has been asked before, but I can't really find what I am looking for. I have a TestStand sequence that contains a stable loop cycle parts several times. I would like to show a pass fail count on each side on the user interface according to the current state of sequences (real-time). the parties can run 1000 times or more, and the UI should show the count for each + a LED to show if the component is always active.
What is the best way to do something like that? The mail user interface? If so how do I set up the messages and have a counter for each share value? Each of the parties would have its own unique message?
Thanks for any help you can give me. If you could provide a quick example.
Bill
Don't know what version of LabVIEW and TestStand, you have, but I threw together a little demo of what you want. Just run the TopLevel.vi, then open the sequence in the zip file.
Here in LV 2014 and 2014 TS.
Kind regards
-
I have a VI to open a UDP connection, data recovery, and then close the connection:
Set the State to 1 opens a UDP connection.
Definition of State 2 retrieves a UDP packet. Most of the boxes above is for the manipulation of data.
Placed at 3 farm the UDP connection.
Now, calling this vi as a sub - VI works fine:
But calling the vi dynamically only:
The second call inside the while loop will raise an error. Apparently, bibliographic are not valid from one call to the other when you call a vi loaded dynamically. What I need to know is, is there a convenient way to get around this?
Hello
The call dynamically a VI within a while loop can be pretty bad in terms of performance and I'm not sure it's a good idea.
But if you really want to do this, using the function "Call by reference node" would be more appropriate in your case (you can find some examples easily).
Best,
J.
-
I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
Zero error of iteration - the treatment of dynamic sql statements in dbms_xmlgen
Hello
I have a procedure that creates a dynamic sql v_sql
cursor v_curr is
Select *.
of btctl_msg_log;
BEGIN
Select count (*) in the v_cnt of btctl_msg_log;
IF v_cnt > 0 THEN
C1 in v_curr
LOOP
v_sql: = "' | ' SELECT * from '. C1.msg_rcrd_src_tbl_nm | |' where rowid = ' | " ' ||'' ' || C1.msg_rcrd_src_tbl_id | " ' ||'' ' ||'' ' ;
Select DBMS_XMLGEN.getXMLtype (v_sql) in the double v_xml;
gives me an error
ORA-19202: an error has occurred in the processing of XML
ORA-24333: zero number of iterations
ORA-06512: at "SYS." DBMS_XMLGEN", line 288
ORA-06512: at line 1
I don't know why is this error happening.
Any help much appreciated.881575 wrote:
HelloI have a procedure that creates a dynamic sql v_sql
cursor v_curr is
Select *.
of btctl_msg_log;BEGIN
Select count (*) in the v_cnt of btctl_msg_log;IF v_cnt > 0 THEN
C1 in v_curr
LOOP
v_sql: = "' | ' SELECT * from '. C1.msg_rcrd_src_tbl_nm | |' where rowid = ' | " ' ||'' ' || C1.msg_rcrd_src_tbl_id | " ' ||'' ' ||'' ' ;
Select DBMS_XMLGEN.getXMLtype (v_sql) in the double v_xml;gives me an error
ORA-19202: an error has occurred in the processing of XML
ORA-24333: zero number of iterations
ORA-06512: at "SYS." DBMS_XMLGEN", line 288
ORA-06512: at line 1I don't know why is this error happening.
Any help much appreciated.Standard when boards (ab) use of EXECUTE IMMEDIATE is to compose the SQL statement in a single VARCHAR2 variable
Then print the variable before passing to EXECUTE IMMEDIATE.
COPY the statement & PASTE in sqlplus to validate its correctness. -
Loading the XML file with the missing elements dynamically by ODI
Hi guys,.
I have the XML with two nodes Employee and address below. On a daily basis, sometimes the address element might not come from the source xml file, but my interface has columns mapped to the elements of the address, and that is why it may fail because of the source element is not found in the file or data could not get charged because the State 'and' in the sql query that is generated between the employee and address elements. Is there a way where I can load the data dynamically where I can search in the file only for items (used) present and dynamically loading data only for these items?
XML file:
<? XML version = "1.0" encoding = "UTF-8"? >
< EMP >
< Empsch >
< employee >
< EmployeeID 12345 > < / EmployeeID >
< original > t < / initials >
John < name > < / LastName >
DOE < FirstName > < / name >
< / employee >
< address >
< > 12345 as WorkPhone < / as WorkPhone >
< WorkAddress > test 234 < / WorkAddress >
< / address >
< / Empsch >
< / EMP >
Thank you
Fabien Tambisetty
I managed to solve it by using left outer joins, and in referring to the structure of the table of the XSD
-
Problems when adding static routes to esxi 5.5 c
Hello
I read this KB on adding static routes:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2001426
But I'm unable to add static routes to my esxi 5.5. host. am I missing something here?
~ # esxcfg - road - l
VMkernel itineraries:
Interface of network gateway subnet mask
10.238.187.0 255.255.255.0 subnet local vmk0
10.238.188.0 255.255.255.0 subnet local vmk1
by default 0.0.0.0 10.238.187.1 vmk0
~ # esxcli network ip route add - 10.238.188.1 - network 10.238.188.0/24 gateway ipv4
In double track 10.238.188.0/24 found in the network. Please remove first the old road.
Kindly help.
You cannot add a new gateway for a subnet exists in the vmkernel as you can't have two default gateway.
-
Hi friends,
I've extended CO where I added dynamic VO where condition, it start error.
Code added to the controller:
SerializableAttribute public class Custom_HomePageCO extends HomePageCO
{
public Custom_HomePageCO()
{
}
' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processRequest (pageContext, webBean);
System.out.println ("NewClase");
OAApplicationModule am = pageContext.getApplicationModule (webBean);
System.out.println (AM);
OAApplicationModule am1 = (OAApplicationModule) am.findApplicationModule ("TrackExpenseReportsAM");
System.out.println (AM1);
OAViewObject vo = (OAViewObject) am1.findViewObject ("TrackExpenseReportsVO");
System.out.println (VO);
vo.setWhereClause ("REPORT_SUBMITTED_DATE is not null");
vo.executeQuery ();
}
' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
{
super.processFormRequest (pageContext, webBean);
}
}
Error message:
Details of the exception. Error details
Logout
Error page
Details of the exception.
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: 27122 Houston: SQL error in the preparation of the statement. Statement: SELECT * FROM (SELECT
BIM OBJECT DESCRIPTION,
BIM INVOICE_CURRENCY_CODE CURRENCY_CODE,
BIM INVOICE_DATE REPORT_DATE,
AERH. REPORT_SUBMITTED_DATE REPORT_SUBMITTED_DATE,
BIM INVOICE_NUM REPORT_NUMBER,
To_char (decode (nvl (I.)) AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0),
0, decode (HAVE. CANCELLED_DATE,
NULL, APS. GROSS_AMOUNT,
AERH. IN TOTAL).
NVL (HAVE. AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0));
FND_CURRENCY_CACHE. GET_FORMAT_MASK
(HAVE. INVOICE_CURRENCY_CODE, 30)). » '|| BIM INVOICE_CURRENCY_CODE REPORT_TOTAL_CURRENCY,
To_char (decode (nvl (I.)) AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0),
0, decode (HAVE. CANCELLED_DATE,
NULL, APS. GROSS_AMOUNT,
AERH. IN TOTAL).
NVL (HAVE. AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0));
FND_CURRENCY_CACHE. GET_FORMAT_MASK
(HAVE. INVOICE_CURRENCY_CODE, 30))
REPORT_TOTAL,
P.PERSON_ID EMPLOYE_ID,
AERH. REPORT_HEADER_ID REPORT_HEADER_ID,
P.FULL_NAME FULL_NAME,
DECODE (AI. CANCELLED_DATE, null,
NVL (aerh.expense_status_code, DECODE (APS. GROSS_AMOUNT, 0, 'PAY. "
decode (HAVE. Payment_status_flag, 'Y', 'PAID. "
', 'BILL. "
'P', 'PARPAID', NULL))),
STATUS_CODE "CANCELLED"),
AERH.source SOURCE,
CURRENT_APPROVER NULL,
ROUND (sysdate - HAVE. DAYS_SINCE_ACTIVITY LAST_UPDATE_DATE),
AERH. RECEIPTS_STATUS RECEIPTS_STATUS_CODE,
AERH. HOLDING_REPORT_HEADER_ID,
BIM VENDOR_ID VENDOR_ID,
AERH. AMT_DUE_CCARD_COMPANY AMT_DUE_CCARD_COMPANY,
AERH. AMT_DUE_EMPLOYEE AMT_DUE_EMPLOYEE,
'CurrentApproverName' CURRENT_APPROVER_SWITCHER,
TO_CHAR (AERH. LAST_UPDATE_DATE, 'DD-MON-RRRR HH'),
BIM INVOICE_ID INVOICE_ID
Of
AK_WEB_USER_SEC_ATTR_VALUES, A.
PO_VENDORS PV,
AP_INVOICES HAVE,
AP_EXPENSE_REPORT_HEADERS AERH,
PER_PEOPLE_X P,.
AP_PAYMENT_SCHEDULES APS
WHERE DID. INVOICE_ID = APS. INVOICE_ID
AND THE AI. INVOICE_ID = AERH. VOUCHNO (+)
AND THE AI. INVOICE_TYPE_LOOKUP_CODE: "="BILL ".
AND A.ATTRIBUTE_CODE = 'ICX_HR_PERSON_ID. '
AND THE PV. EMPLOYEE_ID = A.NUMBER_VALUE
AND A.WEB_USER_ID =: 1
AND P.PERSON_ID = PV. EMPLOYEE_ID
AND THE PV. VENDOR_ID = HAVE. VENDOR_ID
AND DECODE (AI. PAYMENT_STATUS_FLAG,
'Y' sysdate - I. LAST_UPDATE_DATE,
decode (APS. GROSS_AMOUNT, 0, sysdate - I. LAST_UPDATE_DATE, 0)
) < = 30
AND (AERH. SOURCE <>"The two Pay" OR AERH. REPORT_HEADER_ID IS NULL)
UNION
SELECT
BIM OBJECT DESCRIPTION,
BIM INVOICE_CURRENCY_CODE CURRENCY_CODE,
BIM INVOICE_DATE REPORT_DATE,
AERH. REPORT_SUBMITTED_DATE REPORT_SUBMITTED_DATE,
BIM INVOICE_NUM REPORT_NUMBER,
To_char (decode (nvl (I.)) AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0),
0, decode (HAVE. CANCELLED_DATE,
NULL, APS. GROSS_AMOUNT,
AERH. IN TOTAL).
NVL (HAVE. AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0));
FND_CURRENCY_CACHE. GET_FORMAT_MASK
(HAVE. INVOICE_CURRENCY_CODE, 30)). » '|| BIM INVOICE_CURRENCY_CODE REPORT_TOTAL_CURRENCY,
To_char (decode (nvl (I.)) AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0),
0, decode (HAVE. CANCELLED_DATE,
NULL, APS. GROSS_AMOUNT,
AERH. IN TOTAL).
NVL (HAVE. AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0));
FND_CURRENCY_CACHE. GET_FORMAT_MASK
(HAVE. INVOICE_CURRENCY_CODE, 30))
REPORT_TOTAL,
P.PERSON_ID EMPLOYE_ID,
AERH. REPORT_HEADER_ID REPORT_HEADER_ID,
P.FULL_NAME FULL_NAME,
DECODE (AI. CANCELLED_DATE, null,
NVL (aerh.expense_status_code, DECODE (APS. GROSS_AMOUNT, 0, 'PAY. "
decode (HAVE. Payment_status_flag, 'Y', 'PAID. "
', 'BILL. "
'P', 'PARPAID', NULL))),
STATUS_CODE "CANCELLED"),
AERH.source SOURCE,
CURRENT_APPROVER NULL,
ROUND (sysdate - HAVE. DAYS_SINCE_ACTIVITY LAST_UPDATE_DATE),
AERH. RECEIPTS_STATUS RECEIPTS_STATUS_CODE,
AERH. HOLDING_REPORT_HEADER_ID,
BIM VENDOR_ID VENDOR_ID,
AERH. AMT_DUE_CCARD_COMPANY AMT_DUE_CCARD_COMPANY,
AERH. AMT_DUE_EMPLOYEE AMT_DUE_EMPLOYEE,
'CurrentApproverName' CURRENT_APPROVER_SWITCHER,
TO_CHAR (AERH. LAST_UPDATE_DATE, 'DD-MON-RRRR HH'),
BIM INVOICE_ID INVOICE_ID
Of
AK_WEB_USER_SEC_ATTR_VALUES, A.
PO_VENDORS PV,
AP_INVOICES HAVE,
AP_EXPENSE_REPORT_HEADERS AERH,
PER_PEOPLE_X P,.
AP_PAYMENT_SCHEDULES APS
WHERE DID. INVOICE_ID = APS. INVOICE_ID
AND THE AI. INVOICE_ID = AERH. VOUCHNO (+)
AND THE AI. INVOICE_TYPE_LOOKUP_CODE: "in ("STANDARD "," MIXED")
AND A.ATTRIBUTE_CODE = 'ICX_HR_PERSON_ID. '
AND THE AI. PAID_ON_BEHALF_EMPLOYEE_ID = A.NUMBER_VALUE
AND A.WEB_USER_ID =: 2
AND P.PERSON_ID = I. PAID_ON_BEHALF_EMPLOYEE_ID
AND THE PV. VENDOR_ID = HAVE. VENDOR_ID
AND DECODE (AI. PAYMENT_STATUS_FLAG,
'Y' sysdate - I. LAST_UPDATE_DATE,
decode (APS. GROSS_AMOUNT, 0, sysdate - I. LAST_UPDATE_DATE, 0)
) < = 30
AND (AERH. SOURCE <>"The two Pay" OR AERH. REPORT_HEADER_ID IS NULL)
UNION ALL
SELECT
AERH. DESCRIPTION OBJECT,
AERH. DEFAULT_CURRENCY_CODE CURRENCY_CODE,
AERH. WEEK_END_DATE REPORT_DATE,
AERH. REPORT_SUBMITTED_DATE REPORT_SUBMITTED_DATE,
AERH. INVOICE_NUM REPORT_NUMBER,
To_char (nvl (AERH. AMT_DUE_CCARD_COMPANY + AERH. AMT_DUE_EMPLOYEE + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0), AERH. IN TOTAL), FND_CURRENCY_CACHE. GET_FORMAT_MASK
(AERH. DEFAULT_CURRENCY_CODE, 30)). » '|| AERH. DEFAULT_CURRENCY_CODE REPORT_TOTAL_CURRENCY,
To_char (nvl (AERH. AMT_DUE_CCARD_COMPANY + AERH. AMT_DUE_EMPLOYEE + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0), AERH. IN TOTAL), FND_CURRENCY_CACHE. GET_FORMAT_MASK
(AERH. DEFAULT_CURRENCY_CODE, 30)) REPORT_TOTAL,.
PER_EMPLOYEE. PERSON_ID EMPLOYEE_ID,
AERH. REPORT_HEADER_ID REPORT_HEADER_ID,
PER_EMPLOYEE. FULL_NAME FULL_NAME,
NVL (AERH.expense_status_code,
AP_WEB_OA_ACTIVE_PKG. GetReportStatusCode (AERH. Source, AERH. Workflow_approved_flag,
AERH.report_header_id, 'Y', 'n')) STATUS_CODE.
AERH.source SOURCE,
NVL (PER_APPROVER.full_name, AP_WEB_OA_ACTIVE_PKG. GetCurrentApprover (AERH. Source,
AERH. Workflow_approved_flag, AERH.report_header_id, AERH.expense_status_code)) CURRENT_APPROVER;
ROUND (NVL (sysdate - AERH. EXPENSE_LAST_STATUS_DATE,
SYSDATE - AERH. DAYS_SINCE_ACTIVITY LAST_UPDATE_DATE)),
AERH. RECEIPTS_STATUS RECEIPTS_STATUS_CODE,
AERH. HOLDING_REPORT_HEADER_ID,
0 VENDOR_ID,
AERH. AMT_DUE_CCARD_COMPANY AMT_DUE_CCARD_COMPANY,
AERH. AMT_DUE_EMPLOYEE AMT_DUE_EMPLOYEE,
Decode (aerh.expense_current_approver_id,
-99999, "AMEMultipleApprovers."
Decode (PER_APPROVER.full_name,
(null, 'CurrentApproverName', 'AMESingleApprover')) CURRENT_APPROVER_SWITCHER,
TO_CHAR (AERH. LAST_UPDATE_DATE, 'DD-MON-RRRR HH'),
-INVOICE_ID 1
Of
AK_WEB_USER_SEC_ATTR_VALUES, A.
AP_EXPENSE_REPORT_HEADERS AERH,
PER_PEOPLE_X PER_EMPLOYEE,
PER_PEOPLE_X PER_APPROVER
WHERE AERH. VOUCHNO + 0 = 0
AND A.ATTRIBUTE_CODE = 'ICX_HR_PERSON_ID. '
AND AERH. EMPLOYEE_ID = A.NUMBER_VALUE
AND A.WEB_USER_ID =: 3
AND PER_EMPLOYEE. PERSON_ID = AERH. EMPLOYEE_ID
AND (AERH. Source <>"NonValidatedWebExpense".
OR AERH. Workflow_approved_flag IS NULL)
AND AERH.expense_current_approver_id = PER_APPROVER.person_id
AND decode (AERH.total, 0, ROUND (NVL (sysdate - AERH.) EXPENSE_LAST_STATUS_DATE, sysdate - AERH. (LAST_UPDATE_DATE)), 30) < = 30
AND AERH. SOURCE <>"the two Pay."
UNION
SELECT
AERH. DESCRIPTION OBJECT,
AERH. DEFAULT_CURRENCY_CODE CURRENCY_CODE,
AERH. WEEK_END_DATE REPORT_DATE,
AERH. REPORT_SUBMITTED_DATE REPORT_SUBMITTED_DATE,
AERH. INVOICE_NUM REPORT_NUMBER,
To_char (nvl (AERH. AMT_DUE_CCARD_COMPANY + AERH. AMT_DUE_EMPLOYEE + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0), AERH. IN TOTAL), FND_CURRENCY_CACHE. GET_FORMAT_MASK
(AERH. DEFAULT_CURRENCY_CODE, 30)). » '|| AERH. DEFAULT_CURRENCY_CODE REPORT_TOTAL_CURRENCY,
To_char (nvl (AERH. AMT_DUE_CCARD_COMPANY + AERH. AMT_DUE_EMPLOYEE + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0), AERH. IN TOTAL), FND_CURRENCY_CACHE. GET_FORMAT_MASK
(AERH. DEFAULT_CURRENCY_CODE, 30)) REPORT_TOTAL,.
PER_EMPLOYEE. PERSON_ID EMPLOYEE_ID,
AERH. REPORT_HEADER_ID REPORT_HEADER_ID,
PER_EMPLOYEE. FULL_NAME FULL_NAME,
NVL (AERH.expense_status_code,
AP_WEB_OA_ACTIVE_PKG. GetReportStatusCode (AERH. Source, AERH. Workflow_approved_flag,
AERH.report_header_id, 'Y',' don't)) STATUS_CODE.
AERH.source SOURCE,
NVL (PER_APPROVER.full_name, AP_WEB_OA_ACTIVE_PKG. GetCurrentApprover (AERH. Source,
AERH. Workflow_approved_flag, AERH.report_header_id, AERH.expense_status_code)) CURRENT_APPROVER;
ROUND (NVL (sysdate - AERH. EXPENSE_LAST_STATUS_DATE,
SYSDATE - AERH. DAYS_SINCE_ACTIVITY LAST_UPDATE_DATE)),
AERH. RECEIPTS_STATUS RECEIPTS_STATUS_CODE,
AERH. HOLDING_REPORT_HEADER_ID,
0 VENDOR_ID,
AERH. AMT_DUE_CCARD_COMPANY AMT_DUE_CCARD_COMPANY,
AERH. AMT_DUE_EMPLOYEE AMT_DUE_EMPLOYEE,
Decode (aerh.expense_current_approver_id,
-99999, "AMEMultipleApprovers."
Decode (PER_APPROVER.full_name,
(null, 'CurrentApproverName', 'AMESingleApprover')) CURRENT_APPROVER_SWITCHER,
TO_CHAR (AERH. LAST_UPDATE_DATE, 'DD-MON-RRRR HH'),
-INVOICE_ID 1
Of
AK_WEB_USER_SEC_ATTR_VALUES, A.
AP_EXPENSE_REPORT_HEADERS AERH,
PER_PEOPLE_X PER_EMPLOYEE,
PER_PEOPLE_X PER_APPROVER
WHERE AERH. VOUCHNO + 0 = 0
AND A.ATTRIBUTE_CODE = 'ICX_HR_PERSON_ID. '
AND AERH. PAID_ON_BEHALF_EMPLOYEE_ID = A.NUMBER_VALUE
AND A.WEB_USER_ID =: 4
AND PER_EMPLOYEE. PERSON_ID = PAID_ON_BEHALF_EMPLOYEE_ID
AND AERH. EMPLOYEE_ID IS NULL
AND (AERH. Source <>"NonValidatedWebExpense".
OR AERH. Workflow_approved_flag IS NULL)
AND AERH.expense_current_approver_id = PER_APPROVER.person_id
AND decode (AERH.total, 0, ROUND (NVL (sysdate - AERH.) EXPENSE_LAST_STATUS_DATE, sysdate - AERH. (LAST_UPDATE_DATE)), 30) < = 30
AND AERH. SOURCE <>"the two Pay."
UNION ALL
/ * This selection is for reports of invoice imported by casual workers * /.
SELECT
BIM OBJECT DESCRIPTION,
BIM INVOICE_CURRENCY_CODE CURRENCY_CODE,
BIM INVOICE_DATE REPORT_DATE,
AERH. REPORT_SUBMITTED_DATE REPORT_SUBMITTED_DATE,
BIM INVOICE_NUM REPORT_NUMBER,
To_char (decode (nvl (I.)) AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0),
0, decode (HAVE. CANCELLED_DATE,
NULL, APS. GROSS_AMOUNT,
AERH. IN TOTAL).
NVL (HAVE. AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0));
FND_CURRENCY_CACHE. GET_FORMAT_MASK
(HAVE. INVOICE_CURRENCY_CODE, 30)). » '|| BIM INVOICE_CURRENCY_CODE REPORT_TOTAL_CURRENCY,
To_char (decode (nvl (I.)) AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0),
0, decode (HAVE. CANCELLED_DATE,
NULL, APS. GROSS_AMOUNT,
AERH. IN TOTAL).
NVL (HAVE. AMT_DUE_CCARD_COMPANY, AERH. AMT_DUE_CCARD_COMPANY) + nvl (HAVE. AMT_DUE_EMPLOYEE, AERH. AMT_DUE_EMPLOYEE) + nvl (AERH. MAXIMUM_AMOUNT_TO_APPLY, 0));
FND_CURRENCY_CACHE. GET_FORMAT_MASK
(HAVE. INVOICE_CURRENCY_CODE, 30))
REPORT_TOTAL,
P.PERSON_ID EMPLOYE_ID,
AERH. REPORT_HEADER_ID REPORT_HEADER_ID,
P.FULL_NAME FULL_NAME,
DECODE (AI. CANCELLED_DATE, null,
NVL (aerh.expense_status_code, DECODE (APS. GROSS_AMOUNT, 0, 'PAY. "
decode (HAVE. Payment_status_flag, 'Y', 'PAID. "
', 'BILL. "
'P', 'PARPAID', NULL))),
STATUS_CODE "CANCELLED"),
AERH.source SOURCE,
CURRENT_APPROVER NULL,
ROUND (sysdate - HAVE. DAYS_SINCE_ACTIVITY LAST_UPDATE_DATE),
AERH. RECEIPTS_STATUS RECEIPTS_STATUS_CODE,
AERH. HOLDING_REPORT_HEADER_ID,
BIM VENDOR_ID VENDOR_ID,
AERH. AMT_DUE_CCARD_COMPANY AMT_DUE_CCARD_COMPANY,
AERH. AMT_DUE_EMPLOYEE AMT_DUE_EMPLOYEE,
'CurrentApproverName' CURRENT_APPROVER_SWITCHER,
TO_CHAR (AERH. LAST_UPDATE_DATE, 'DD-MON-RRRR HH'),
BIM INVOICE_ID INVOICE_ID
Of
AK_WEB_USER_SEC_ATTR_VALUES, A.
AP_INVOICES HAVE,
AP_EXPENSE_REPORT_HEADERS AERH,
PER_PEOPLE_X P,.
AP_PAYMENT_SCHEDULES APS
WHERE DID. INVOICE_ID = APS. INVOICE_ID
AND THE AI. INVOICE_ID = AERH. VOUCHNO (+)
AND THE AI. INVOICE_TYPE_LOOKUP_CODE: "="BILL ".
AND A.ATTRIBUTE_CODE = 'ICX_HR_PERSON_ID. '
AND THE AI. PAID_ON_BEHALF_EMPLOYEE_ID = A.NUMBER_VALUE
AND A.WEB_USER_ID =: 5
AND P.PERSON_ID = I. PAID_ON_BEHALF_EMPLOYEE_ID
AND AP_WEB_DB_HR_INT_PKG. IsPersonCwk (HAVE. PAID_ON_BEHALF_EMPLOYEE_ID) = 'Y '.
AND DECODE (AI. PAYMENT_STATUS_FLAG,
'Y' sysdate - I. LAST_UPDATE_DATE,
decode (APS. GROSS_AMOUNT, 0, sysdate - I. LAST_UPDATE_DATE, 0)
) < = 30
AND (AERH. SOURCE <>"The two Pay" OR AERH. REPORT_HEADER_ID IS NULL)) QRSLT WHERE (REPORT_SUBMITTED_DATE is not null)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:603)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2360)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1759)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
at _OA._jspService(OA.jsp:33)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
# # 0 in detail
java.sql.SQLException: ORA-01008: not all variablesat oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2548)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2933)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:650)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:578)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:631)
at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:518)
at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3375)
at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection(OAJboViewObjectImpl.java:828)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4525)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:574)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:544)
at oracle.jbo.server.ViewRowSetImpl.executeDetailQuery(ViewRowSetImpl.java:619)
at oracle.jbo.server.ViewObjectImpl.executeDetailQuery(ViewObjectImpl.java:3339)
at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3326)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQuery(OAViewObjectImpl.java:441)
at oracle.apps.ap.oie.webui.Custom_HomePageCO.processRequest(Custom_HomePageCO.java:26)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2360)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1759)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
at _OA._jspService(OA.jsp:33)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)
java.sql.SQLException: ORA-01008: not all variablesat oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:583)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1986)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1144)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2548)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2933)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:650)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:578)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:631)
at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:518)
at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3375)
at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection(OAJboViewObjectImpl.java:828)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4525)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:574)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:544)
at oracle.jbo.server.ViewRowSetImpl.executeDetailQuery(ViewRowSetImpl.java:619)
at oracle.jbo.server.ViewObjectImpl.executeDetailQuery(ViewObjectImpl.java:3339)
at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3326)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQuery(OAViewObjectImpl.java:441)
at oracle.apps.ap.oie.webui.Custom_HomePageCO.processRequest(Custom_HomePageCO.java:26)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:587)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1136)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:959)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:926)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:646)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:247)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2360)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1759)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:511)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:432)
at _OA._jspService(OA.jsp:33)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:727)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:306)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:803)
at java.lang.Thread.run(Thread.java:534)I took the sql error message and tried the same performance in Toad... I could run it smoothly... I dot know why his work during the execution of the page
Please help me guys...
Thank you
Pavan
See you are not sure if they make somewhere clause or where clause params. Your code can be disturbing the standard flow of the code
Try
(a) Substitution of view object
(b)
OAViewObject vo = (OAViewObject) am1.findViewObject ("TrackExpenseReportsVO");
System.out.println (VO);
vo.setWhereClause (null);
vo.setWhereClause ("REPORT_SUBMITTED_DATE is not null");
vo.executeQuery (); do not run
B. try if this does not work go for a
Concerning
Marie Lise S
-
Why is there no user interface for moving the cache locations/profile?
OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
(this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
To change your profile location? The doc only that talks on this subject here:
http://KB.mozillazine.org/Moving_your_profile_folder
and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?
There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)
Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.
Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.
https://developer.Mozilla.org/en/Profile_Manager
https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager
http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/
You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package. -
How can I reset my R7000 in the State in which I out took it of the box?
How can I reset my R7000 in the State in which I out took it of the box? Why am I asking? The latest version of the firmware has destroyed the connectivity and performance of my router. I'll have to deal with the devices that can not connect, devices that fall, extremely poor performance, etc. It's just a disaster.
I've been with Netgear 5-6 years and had to do something last night, I have never had to do before - I had to go back to an earlier version of the firmware. Honestly, very little worked well. The previous version of the software has a few hiccups here and there, but the new version is just a nightmare.
Now that I have applied even if an earlier version of the firmware, I can still see some of the latest options which were not there before. I have taken note that the firmware was now the prior publication, but the GUI is still the current version.
Just to give a time frame on my Nexus 5 running 802.11ac, prior to the current version, I could peg 90Mbps +. Since the new version, the best I can do standing right next to the router is 24Mpbs +. Even after the restoration of the previous firmware, the speed is always the same.
So, I want to return the router to the shape that when I took it out of the box, apply the previous firmware and reset up if necessary. I want to just my router back prior to the most recent release that destroyed. Once again, that the release had a few hiccups, but it was still usable.
The 30-30-30 reset method works on most routers out there, but not on the R7000...
The correct way to reset your R7000 at the exit of the State of the box is...Download the original version of Netgear R7000 Support HP http://downloadcenter.netgear.com/en/product/R7000(Firmware Version 1.0.0.96)
Reset and flash back of any Stockfirmware on the original Stockfirmware:
Power on the router
Wait a few seconds
Press Reset for 5-8 seconds max! **
connect to 192.168.1.1
Flash the original FW
now that the router restarts
Wait a few seconds
Press Reset for 5-8 seconds max! *** After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.
Now, it's as out of the Box.
Reset and flash back to any DD - WRT FW to Stockfirmware initial:
Power on the router
Wait a few seconds
Telnet to the router
Run the commands:
'clear the NVRAM '.
'reboot '.
Wait a few seconds
connect to 192.168.1.1
Flash the original Stockfirmware through the Administration tab (if the upgrade fails and the site is not available, try another browser such as Firefox, chrome, safari)
now that the router restarts
Wait a few seconds
Press Reset for 5-8 seconds max! *** After each reboot, the first login on StockFW screen should show something like "refresh the settings or the settings of loading.
Now, it's as out of the Box.
I have reflashed several R7000 to initial Stockfirmware as the last FW with Beamforming was not stable enough after several days/weeks testing... The FW showed massive connection drops after 24 hours and only a reboot of the router fixed it (tested on 3 x R7000)
The connection has dropped from 1300 to 66-256 after several hours...-. -.
Now I'm waiting a new FW version with corrections of Wifi of Netgear.
-
You try to run the scan mode and mode interface fpga at the same time is causing errors
I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.
So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.
1. the project has created and added the peripheral crio using the interface of the scan engine.
2. Add the target fpga and drag and drop the 9211 inside modules
3. has created the fpga in interface file with and compiled with no error.
4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.
5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")
The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)
I get the following error from the open fpga vi reference:
code error-61141
"Thermocouple method Test.vi FPGA.
Activities FPGA:Open FPGA interface reference.
Reserved outside LabVIEW FPGA: turns The RIO Scan Interface. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.
Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.
My system:
cRIO-9014 controller RT with crio-9104 bottom of basket.
LabVIEW 2009
Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)
rex1030 wrote:
I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.
This should not be the case. 9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem. Do you have specific issues with this?
So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.
1. the project has created and added the peripheral crio using the interface of the scan engine.
2. Add the target fpga and drag and drop the 9211 inside modules
3. has created the fpga in interface file with and compiled with no error.
4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.
5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")
You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed. I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later. Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly. Try the following steps.
1. right click on the frame element and select Properties. Make sure that the Interface FPGA option button is selected. \
2. right click on the frame element and select deploy.
3. repeat your VI.
The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)
I get the following error from the open fpga vi reference:
code error-61141
"Thermocouple method Test.vi FPGA.
Activities FPGA:Open FPGA interface reference.
Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed. If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.
It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.
I'm sorry that you have had difficulties. Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.
Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.
My system:
cRIO-9014 controller RT with crio-9104 bottom of basket.
LabVIEW 2009
Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)
-
How to detect the State of a LabVIEW test success/failure
Which variable TestStand should I read to determine the State of a test of TestStand set success/failure?
I use the parallel model and LabVIEW can see index of my process with the variable "RunState.TestSockets.MyIndex", but now the LabVIEW needs to know if this process was successful or failed the entire test.
Possible, recommended to capture those (so do not use the "built-in controls visible TS') is to capture the UIMsg_EndExecution (which is generaated automatically if the engine ends an execution).
This message to user interface, you can access its data, one being the property of Execution.ResultStatus and execution.
See using TS for the possible values of ResultStatus. This allows to control indicators on your UI.
hope this helps,
Norbert
-
Question about the structure of dynamic event
There is an indicator of "String" and two buttons Boolean ("GenerateMouseDown?" and "GenerateMouseUp?") on the front panel. If the value of the "GenerateMouseDown?" or "GenerateMouseUp?" control is set to TRUE, the string "GenerateMouseDown" or "GenerateMouseUp" will be added to the indicator "String" once I click on the indicator, otherwise there is no string added to the indicator.
I created the vi as in the attachment to this post. However, if I select the button of "GenerateMouseUp?" or "GenerateMouseDown?" as the value FALSE, the matching string still will add to the indicator.
Is that anybody could be using? Thank you.
Hi JCM,.
It's because you have linked to these events directly to the string ' String: mouse upwards.
When you want to use the events registered dynamically, you must select instead: "'
: mouse upward"... " You are in no way related to Neo6, who asked a very similar question just yesterday?
-
When I use the right button of the mouse to extend the context menu,
as the title, the error message appeared.
the memory of the statement is always changed
not only '0x04d119fa', but also '0x046c19fa', '0x100019fa' or other appears randomly.
Why it is happening?
I use xp sp3 with the Korean version.
What you mean that: '.. '. menu popup .extend?
If Explorer crashes on right-click, looks like you may have a faulty Extension of the Shell Explorer.
Shell Extensions make up the content of what you see when you right click on something. If one of them is afflicted, which can cause Explorer to crash:
When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.
Those who would be the Explorer extensions that do not belong to Microsoft. This means that extensions that you have added. Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.
Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (such as the scan of this file, open that file, play this song, etc...).
If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected. If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.
First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem. You can have a lot of installed non-Microsoft extensions you don't know even being given that some installed software installs new without tell you about it.
Download ShellExView here to see what Explorer extensions you have loaded:
http://www.NirSoft.NET/utils/shexview.html
ShellExView does not install anything on your computer, simply of runs and displays.
After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.
Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.
Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.
You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
You can Google something like:
Explorer XP crashing (you must fill in the name of add your suspect on.) See what kind of search results hits you get and are looking for solutions or situations that sound like yours.
I'm not a defender of trial and error, but I can't think of another way to do...
Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish.
The result of the change is immediate and no reboot is necessary.
Test your right-click fault condition. If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.
If you recognize all the extensions that have been added or recently downloaded, start with these first.
Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again. In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.
Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '. You have disabled the last extension would be suspicious.
You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.
If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave. When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.
The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.
I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.
If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.
If you find the offending extension that's the problem, please let us know what it is that I can add to my list.
Maybe you are looking for
-
I use Firefox 39.0. I turned on the 'automatic update'. But despite starting, my Firefox is not being updated automatically. I need to download a new version every time in order to stay up to date. Help, please.
-
Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed
Hello I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the m
-
HP Envy 4520: Photos that come out white print a phone but is impression of PC
Hello, can someone please help me. Recently bought a hp envy 4520 and brilliant printing photos to PC, scanning and perfect copy, but here the thing, will not print my printer samsung S4 galaxy mini, even if it connects over wi - fi. I have install t
-
ProBook G3 450: Win 7 Pro license recovery after a downgrade Win 10 Pro
Hello We just received our HP Probook 450 G3 downgraded to win 10 Pro with Win 7 Pro as requested. We now have to master with our tools but, previously, I need to pick up the Win 7 Pro license. I'm looking for the Productkey defined for laptops. Than
-
'Check' updates from Windows Update is stuck after that I have reset my laptop
I refreshed and reset my laptop but it will always get stuck 'Check updates' and everything works so slow... than ever before.Is this a problem with my hard drive?