Adding RAM to an HP Z800 - how many slots should I use?
I'm about to add more RAM to an HP Z800. The computer has 12 memory slots. Today, I have 12 x 2 GB RAM modules, IE 24 GB of RAM. The processors are 2 x Intel X 5670 (processor-core/6). I have the BIOS version 3.21.
I want to upgrade to 48GB of RAM and wonder if I should buy 6 @ 8 GB memory strips or fill all 12 slots with 4 GB modules. Both options give me 48GB of RAM. So the question is if I lose any performance using only 6 of the 12 sites of memory and if so about how much? What is the pros and cons with the help of 12 locations compared to the use of only 6 sites while leaving 6 unused when fill a system with the same amount of RAM?
Intend to purchase Kingston memory, 2 x KTH-PL313K3 / 24G or 4 x KTH-PL313SK3 / 12G.
Any useful response is appreciated!
/ Roger
Roger,
Because the price is not the issue here, they are substantially the same, I would look in the documentation for the HP. Should I use mode memory channel single, double or triple with 6 or 12 slots populated? With 12 slots, you are sure to use the memory in triple mode, with 6 I don't know, but with only 6 slots populated, you have opportunities for expansion in the future.
There is a definite advantage in the use of 48 more than 24 GB, but is it wise to invest in this memory with your specific mobo and CPU, or wait for the SB-E as an alternative with 32/64 GB of memory, although at much higher prices but with OC-ability, you must decide which.
Tags: Premiere
Similar Questions
-
How many counters should I use at the same time?
I have the cDAQ-9172 and 9411.
There is the specification of 9411, 6DI 9411 channels.
The NOR-DAQmx help tell
Note Terminal PFI are available when the unit is installed in the location of a chassis OR cDAQ-9172 or Groove 5 6.
So, I don't know if this means 9172 has 2 meters can be used simultaneously.
My question is 9411 6DI channels, it can be used as counters simultaneously?
I have more device 2 generate frequencies that must be acquired.
I hope someone here can help me or give me a hint.
QIA
Hi, QIA.
The cDAQ-9172 has 2 counters that can be used simultaneously, and you are right that install your NI 9411 in slot 5 or 6 slot will allow you to access these counters. 6 DI lines on your 9411 may be used to access the entries to each meter.
I do not know if you say you have more than 2 signals to measure the frequency on. If this is the case, after a little more info about your application (how times do you need to read the frequency? How many channels?) and we can try to find a good solution.
Kind regards
Kyle -
Satellite L550D-136 - how many slots should memory be?
Hello
I bought this system as my first laptop from Toshiba.
Satellite L550D-136
Part number: PSLXSE-00E00SY4I visited crucial.com to verify what type of memory I can put in this laptop and he came back with the result that it could not identify exactly what type of system it is but is to show that this laptop has 4 memory slots. So I went ahead and it opens from the bottom and I see only two slots (2x2gb).
Is there some more hidden across what locations they mob or is it information crucial false?
I can't find a proper documentation on the toshiba Web site.
Thank you
Hello
According to the specifications of the product on this site:
http://www.ultra-laptops.com/laptops/manufacturers/POS/toshiba_satellite_a500-136
RAM 4096 MB installed
Memory type DDR2 800 MHz
Maximum RAM 8192 MB
2 RAM slotsYou can upgrade up to 8 GB DDR2 (800 MHz).
-
How many passwords should I use my MAC computer
I just downloaded an update for Adobe and my computer asks for a password to install. I typed the password, I just used to log in this forum, but he said that it was not valid? Do I need a different password for each function on my computer?
It's your computer admin password that you use to connect to your computer user account
I hope it's useful.
-
HOW MANY BUTTONS SHOULD I USE IN STILL CS5
HI, I NEED TO KNOW THE AMOUNT OF BUTTONS MAX THAT I CAN USE IN STILL CS5 TO CREATE A PROJECT OF MULTIPLE BUTTONS.
Thank you!
DANIEL
The ceiling of button's menu. So, you could make your menu 25 button in 4:3, but not 16:9. Easy enough to split the C menu in multiples in a letter of the alphabet.
Keep in mind that you have a limit of 1 GB for all elements of the menus/movement for the project.
You also have a limit of 99 chronologies by project in Encore.
-
How many slots for RAM, model HP 250 G5 (W4M85EA)?
How many slots for RAM, model HP 250 G5 (W4M85EA)? What is the maximum amount of RAM supported HP 250 G5 (W4M85EA)?
Two memory non-customer-accessible/extendable module slots
Supports up to 16 GB of RAM
Your manual here.
http://h10032.www1.HP.com/CTG/manual/c05087748
REO
-
How many slots my Satellite M100-222 is the RAM?
Hi all
I want to add RAM to my noutbook (Satellite M100-222). But I don't have my computer has a now how many slots for RAM. I think that 2 or 4...
I know that I now have 2 512 RAM. I have empty slots now?How many slots, I have in all?
Most (I think all) laptops series supports the memory locations 2 max.
Your M100 supports also the 2 memory slots.Check this memory M100-222 Info page:
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=25742&ft=m&St=3Total memory Slots: 2
Maximum memory: 4 GBI wish you good day ;)
-
How many slots does memory have a netbook Acer Aspire One 721 MS2298?
We have an Acer Aspire One 721 MS2298 Netbook with 2 GB RAM and Win 7 64 bit. He will perform better with 4 GB of RAM.
How many slots memory has this netbook, and what is the maximum that can be installed.
I have beleave to DDR3 - 1066 modules SODIM.
Specifications:
http://support.Acer.com/acerpanam/NetBook/2010/Acer/Aspire/AspireOneAO721/AspireOneAO721sp2.shtml
Support DDR3 SDRAM dual channel with two modules soDIMM
-
How many slots for DDR2 is in my Satellite M100-221?
How many slots for ddr2 in my M100-221 notebooks? And where I get instruction to change memory?
Hello
Sorry, but I really can't understand you. On the low side in the Middle it is placed memory fixed with a screw cover. Is it so complicated to remove this screw and look inside?
In any case in your unit there are 2 slots available. Memory upgrade you need not all the manuals. Buy the right compatible memory module, remove the cover and put it in the location empty.
-
How many times can I use the discount of the University?
How many times can I use my University discount?
See the information below (from policy refund & sales at the bottom of http://www.apple.com/shop/browse/campaigns/education_pricing ):
Faculty, staff and students to purchase from the Apple Store for education individuals will be able to buy the following quantities of product per academic school year. Not all products have special prices for education.
- 1 desktop computer: one (1) may be purchased per year
- 2 mac mini: one (1) may be purchased per year
- 3. Notebook: one (1) may be purchased per year
- 4 iPad: two 2 can be purchased per year
- 5. display: A maximum of two 2 may be purchased per year
- 6. software: A maximum of two 2 per software title may be purchased per year
-
How many processes should normally turn my vista computer?
Original title: vista-based computerHow many processes should normally run my vista computer.
How many processes should normally run my vista computer.
There is no overall normal - normal only for * you * and * your * system.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
-
How many times should I scan my computer?
Hello
Please go to the Microsoft Community Forums.Description of the question, we understand that the virus scan is not recognized by the anti-virus software.Let me go ahead and help you with the issue.Please answer these questions, which will help us to help you best.1. which Antivirus software is installed on the computer?2. don't you make changes to the computer before the show?I want to tell you that you should scan your computer for viruses with an antivirus up-to-date product at least once a week. If you access the Internet very often, you must scan your computer regularly. Most antivirus products are able to automate the analyses at regular intervals.Also, I suggest you uninstall and reinstall the anti-virus program and check if it helps.Check out the link:
How to uninstall antivirus or antispyware programs?
http://Windows.Microsoft.com/en-us/Windows/how-do-i-uninstall-antivirus-or-antispyware-programs
Important: Antivirus software can help protect your computer against viruses and other security threats.
In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
How many processes should be running?
I don't know if this is the right place to post this, but I was wondering how many processes should be running on my computer. It is a fairly new computer.
In addition, in the first minutes of the computer couple upward the number of process initializing increase without me open all programs. Is this normal or not? It can be normal and I had just paid attention to before.
Thank you.
Hello
Yes, there may be more than one process running and these methods and these tools will help you
View and order a lot of them.How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/
Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Use advanced tools to solve performance problems in Windows 7http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/
Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have
Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your system
boots and you login. Autoruns shows you the full list of registry and file locations where
applications can configure Auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded
automatically when Windows starts. For each request, the following information
appears: product Type of startup (registry/Startup folder), Command - Line String,
Name, file Version, company name, location in the registry or the file system and more.
It allows you to easily disable or remove unwanted programs that run in your Windows
startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The
Window Watcher says it all, reporting of any window created by running programs, if
the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How many systems we can use with a cloud of Adobe® Photoshop® CC... ?
Please let us know, how many systems we can use with a cloud of Adobe® Photoshop® CC... ?
You can use it on two computers, but not at the same time.
-
How many computers can I use my creative cloud subscription?
How many computers can I use with this download... I have 2 laptops and a desktop computer?
You can install your app cc and programs on an unlimited number of computers.
the only (minor) limitation is that you can only sign-in (and therefore start) programs cc on, more than two computers at the same time, but that is not really a restriction because you can logout of the computers and computer b with c, so you don't have even remember to disconnect to connect on a 3rd.
Maybe you are looking for
-
iPad battery Mini after update iOS9.3
Hi all I have a Mini iPad (1st generation). Until I upgraded to iOS9.3, everything worked well. With the new iOS9.3, drains the battery overnight, even if the iPad Mini is not used. Settings-> battery-> use information indicate that in the last 24 ho
-
Cannot use the Val function in a script use
I'm trying to convert a text string (binary number) in a number by using the Val function in a script of use but the colors of tiara the term Val in red and the script produces an error indicating "Variable is undefined:"Val" Why is that happen? Some
-
Need to create a? Mark G510n password
I have a new router and the laptop replaced count it recognizes the printer, but can not commumicate. My new lptop doesn't have a CD player. Is it possible to type in one? the password when inputing the pasword of the number pad printer?
-
Windows knocked out my wifi XP update
Just got an update and now my wifi does not work. I was working, and the update says that he had to do a restart. after reboot, wifi doesn't connect. Unfortunately, I had turned off restoring the system a couple of months because of some software
-
Using the tool for customizing Windows 7 sysprep
I installed windows 7 Professional. Now I have to customize OS adding / changing some settings. He will be passing the Unattend.XML to the sysprep tool and selecting generalize option? Using the installer without assistance in this way (with the sysp