Adding shortcuts to the allures of IPad

Similar Questions

• Adding shortcuts in the atmosphere of the IPad

  I already have an answer to that question appears resolved because I didn't know that I had to push to be 'resolved' or 'useful' which I felt neither one applied when I replied to the response of the user AJ397. But by default chooses resolved FOR you even if it was not resolved. Thus the reason asking him again.

  There is an option in the settings general keyboard that says ' enable shortcuts "I activate. But the only available shortcut is the shortcut of Apple factory. This allows a period at the end of a sentence if the space bar double hit. What is the point of shortcut if there is only one to choose? My IPad Air has 32 GB of memory, storage capacity 26.5 and I'm not sure of the speed of the processor. User AJ397 said that I had to go where I said already, I went and tap shortcuts. There was a gray over a symbol in the corner to tap to add a shortcut. But there is no option for tap. I could only drag the shortcut to on or off. I found in "text replacements" you can type in some combinations of letters that will extend to words or phrases. But it was all I could find. Which is what I wrote in my reply. In fact, you can add shortcuts to IPad-like? 32 GB memory, ability to 25.6,

  An iPad is a different animal from a computer. I'm not familiar wath the ctr + z and the other shortcuts mean in your other thread. What kind of action do you want?

• Adding shortcut to the taskbar

  Hi all

  Is it possible to add a shortcut to the taskbar without using thinreg? I can add to the list of desktop computers and the program but it will not appear on the taskbar, currently I have this line in my package.ini:

  Shortcuts = % programs %; %D esktop %; %APPDATA%\Roaming\Microsoft\Internet Explorer\Quick Launch\User Pinned\TaskBar

  I don't know if the part in bold is a legitimate place, because usually that's where the natively installed IE8 version would have a shortcut. Should I provide a different path location?

  Our VDI desktop environment is Windows 7.

  Kind regards

  Ross

  Ross,

  According to my understanding, ThinApp can be only if deployed PIN using MSI and does not for streaming from a network share.

• Adding shortcuts to the installer lead to out of memory crash

  I have a collection of about 20 executables I want to consolidate to a single installer. Create destinations, by selecting the source files etc is very simple, nothing special. I wanted to add shortcuts for simple applications, but here the installer / labview is short-term memory permanently. I started the project and Installer freshly, so nothing to comment on. I use LV2012, 32-bit. Here are the steps I did:

  (1) adding Destinations and source files

  

  (2) select "positive" in the tab shortcuts, memory directly increases regularly.

  

  10:03 seconds, it already is out of memory.

  

  (4) not enough memory, unspecified error occurred at IB_UI_Page_Shortcuts.vi and CDK_Utility_Prune_Unused_Destinations.vi

  

  Are there patches or known workaround solutions for this problem? I'm looking for something impossible?

  I tried several times, but who realized at some point that it consumes too much memory when opening the popup generator to a finite amount of files.

  When I had six executables and so on 100 files in the dialog program installation, already happen to over 1.1 GB of memory. By adding the seventh executable and then by creating the seventh shortcut, it would amount to more than 3 GB and LV would break.

  I finally solved by manually editing the file .lvproj with Notepad, copy and paste the shortcut properties and then build everything. It worked for me, but is far from practical.

  See below that the shortcut list is not complete, in this installer, it should install twenty executables and shortcuts. So there's something fishy about this tab shortcuts...

  

• create a shortcut to the page on office in ADF?

  Hi all

  I use Jdeveloper 11.1.1.7.0.

  I have a page of the ADF that includes some elements and in this page, I need to include an icon or the button called "create shortcut".

  When the user clicks on "Create shortcut", then the shortcut page must be created on the desktop.

  By clicking on the shortcut icon on the desktop, I should be able to open the ADF page.

  How can I achieve this?

  Please give your valuable suggestions...

  Thank you.

  GoTo---> your---> library project properties & Classpath---> click the library that you added---> click on the Edit option to the right to check this option in a new window

  Also check - exception class not found during deployment of the application. They show me the finger... again!

  Ashish

• Shortcut to the front/rear of frame does not

  Hi all

  I tried to edit this shortcut in the keyboard shortcuts Panel in the section "help". But I can't for the life of understand me this. Just download the new trial version of CC, and I am amazed, I can't navigate forward or back 1 frame, as usual. What Miss me here ha! Thanks in advance!

  Left + right, or Ctrl/Cmnd arrow to move an image. Page up and Page down to do the same thing if you have the keys. Adding the SHIFT key moves 10 images. What keys you are trying to use? I've never seen it work only not on a standard QWERTY keyboard.

• How to open an overview as a shortcut from the home page popup?

  Hello

  I have a question about web client plugin.

  I created an extension with extension as vise.global.views point. He points to one of my points of view with the Ombudsman.

  I added a shortcut on the home page. By clicking on the shortcut, I want to open this view in a popup.

  I checked the other shortcuts where he navigates the user to a new page.

  Is it possible to open a pop-up dialog box to navigate to a new page instead?

  Any help is really appreciated.

  Thank you

  Vincent

  No, it is not possible. An extension of shortcut can provide navigation to another position in the view, and a popup is not an extension.

  Homepage shortcuts are supposed to be points of entry to the "applications" or important sites in applications.

• Shortcuts in the Windows Start menu?

  Is it possible to create a shortcut in the Windows Start menu for a program that is installed on a Windows XP VM as of Windows 7 XP mode can do? I would like to be able to choose a program and have the virtual machine starts automatically.

  We added this feature in version 7.1 (currently in beta).  When you are in the unit, move the mouse over the Start button to bring up the start menu in the client. You can drag any shortcut for the program on this menu and drop it on the desktop or any other folder. On a Windows 7 host, you can also lock a window of the unit.

• Installation of the ipa on iPad freezes

  Version: 1.0 StartHTML:0000000167 EndHTML:0000003164 StartFragment:0000000451 EndFragment:0000003148

  Hello world

  We have created a presentation via Indesign CC application and tested as a folio. Previously it worked fine. After that, we created the ipa by folio builder and DPS App Builder file. When we went through all the steps we connected an iPad Mini in our MacBook Air and iTunes sync. But when the ipa began to install on the iPad it froze during installation.

  (We tested previously the same different ipa on iPad file and the same portfolio of problem. It was former iPads, it's why we then tried it on a brand new iPad Mini. No results).

  All our test devices have been enrolled in the .mobileprovision file before the test.

  We tried several times with the creation of new APIs, but nothing works.

  Down below, you can see the specs of the system that we have used to build and test the application.

  -The system on which the application was created in Indesign CC: Mac OS X 10.6.8

  -Version to test the application when it was still a folio: 7.0.4

  -Version iPad Mini to test the application while he was an ipa: 7.03

  -Browser to create profiles: Safari 5.1.9

  -Browser to create certificates P12: Safari 5.0.6

  We have taken measures:

  -Created a folio in Indesign CC

  -Creation of the application via the generator of folio in CC Indesign using DPS App Builder

  -Downloaded the application Developer (ipa) of DPS App Builder

  -Downloaded ipa in iTunes version 11.1.1 on MacBook Air version: OS X 10.8.5

  -Connected iPad mini version 7.03 for MacBook Air

  -Downloaded mini iPad app

  -Install the app on iPad mini where it freezes in installation

  I hope someone can help us understand what the problem is.

  Thank you in advance!

  Janneke

  This is because your .mobileprovision file isn't the UDID of your device to test inside. See http://forums.adobe.com/thread/1362720 for another person who had this problem and how to fix it.

  It is very easy in iTunes to think that you have added the UDID to your mobileprovision file when all you've done is add it to the account. After adding it to your account, you must regenerate the .mobileprovision file and explicitly the box next to the device UDID check when you create the new .mobileprovision file. You also need you sure that you use the new file when you create your application.

  Neil

• JNLP file update does not upgrade the cache of the client (with the shortcut on the desktop)?

  Hello
  
  I have such a problem that the changes made to the JNLP file at the server level are not being updated the JNLP file at the level of the customer if the application is started from a shortcut on the desktop. In my real application I had this experience when adding a jar library to the distributed application on HTTP, but I realized the following example where the source code of a JNLP application (distributed in the local file system) has been changed.
  
  Global:
  In my example, I use the demo tree Dynamics [url http://download.oracle.com/javase/tutorial/deployment/webstart/deploying.html] jar of starting Java-> [url http://download.oracle.com/javase/tutorialJWS/deployment/webstart/ex6/webstart_ComponentArch_DynamicTreeDemo/DynamicTreeDemo.jar] DynamicTreeDemo.jar Web Application deployment. The assessment is done with java 6u26 to Windows XP.
  
  The steps
  < li > 1. Have a JNLP file with jar used (in my example at D:\jnlp-test )
  < li > 2. Start the application from the JNLP file (to create the shortcut on the desktop)
  < li > 3. Edit the JNLP file.
  < Li > - in my example, to update the base code to D:\jnlp-test2. Also copy the JNLP and jar in this directory.
  < li > 4. Run the application from the desktop shortcut
  < li > - 4.1 - at this point, you have to refresh the JNLP file to the cache
  < li > 5. The D:\jnlp-test directory remotely
  
  Results
  (a) after step 4, I think that put JNLP application cache (Control Panel-> Java-> Viewer...) must be updated to contain the new content (new code). BUT my cached JNLP file still contains the old content (in my example = "file:/D:/jnlp-test/" code base)
  
  (b) in step 5, that my candidacy should work properly from the new location of distribution BUT the problem crashes when trying to access the old location with:
  Unable to launch the application
  Error: D:\jnlp-test\DynamicTreeDemo.jar (Maaritettya take ei loydy) +("The path can't be found" in Finnish) +.
  
  My original JNLP (steps 1 and 2) file:

  <?xml version="1.0" encoding="UTF-8"?>
  <jnlp spec="1.6+"
          codebase="file:/D:/jnlp-test/"
          href="dynamictree-webstart.jnlp">
      <information>
          <title>Dynamic Tree Demo</title>
          <vendor>Dynamic Team</vendor>
  <shortcut online="true">
  <desktop/>
  </shortcut>
      </information>
      <resources>
          <!-- Application Resources -->
          <j2se version="1.6+"
                href="http://java.sun.com/products/autodl/j2se"/>
          <jar href="DynamicTreeDemo.jar" main="true" />
      </resources>
      <application-desc
           main-class="webstartComponentArch.DynamicTreeApplication">
       </application-desc>
  </jnlp>

  Updated the JNLP file (after step 3, the code has changed)

  <?xml version="1.0" encoding="UTF-8"?>
  <jnlp spec="1.6+"
          codebase="file:/D:/jnlp-test2/"
          href="dynamictree-webstart.jnlp">
      <information>
          <title>Dynamic Tree Demo</title>
          <vendor>Dynamic Team</vendor>
  <shortcut online="true">
  <desktop/>
  </shortcut>
      </information>
      <resources>
          <!-- Application Resources -->
          <j2se version="1.6+"
                href="http://java.sun.com/products/autodl/j2se"/>
          <jar href="DynamicTreeDemo.jar" main="true" />
      </resources>
      <application-desc
           main-class="webstartComponentArch.DynamicTreeApplication">
       </application-desc>
  </jnlp>

  What could be wrong with my JNLP files or y at - it a bug? [url http://www.coderanch.com/t/528570/JNLP-Web-Start/java/Do-jnlp-file-updates-itself#2455103] Updates Coderanch thread jnlp file talks about something similar occurs only when Java Web Start cache path contains white space?
  
  Best regards
  Touko
  
  Published by: user603338 on August 9, 2011 12:06 (corrected the link to Coderanch)

  The original shortcut should always point to the original code base. This is normal. In addition, I don't see how you can expect a JNLP installed (on the client side) to guess it's supposed to now recover the JNLP since a different code base!

• APEX shortcuts using the source of the body of the PL/SQL function

  Hi all
  
  Recently, I came across the feature of "Shortcuts" in the "Shared components" section of the APEX and thought great, somewhere to set the common/standard items once, then use these several times in different pages of my application.
  
  This seemed to work correctly when you use the 'Source' of "HTML Text" or "HTML text with special characters escaped", but then I wanted to explore the use of the "Body of the PL/SQL function" option to create a more dynamic shortcut/variable on the base.
  
  This is where I came across a particular problem in the APEX (Version 3.2.1.00.10 on GR 11, 2 on Oracle Enterprise Linux). When I set my shortcut, and then perform a reference to my shortcut (using "MY_SHORTCUT") in an area of a page, the value of shortcut is back, but is added with the reference variable (ie. the 'MY_SHORTCUT' chain).
  
  For simplicity, my example looks like this (of course, my real world example is a bit more complicated, but this example produces the same error):
  (a) I define my shortcut called "MY_SHORTCUT" and using the body of the PL/SQL function under "Source Type", define my procedure as "htp.p(:USER)."
  (b) I then create a new page (basic HTML page), and a new region of the 'type'-> 'HTML Text (with shortcuts).
  (c) in the "Source region", I define my shortcut like - "MY_SHORTCUT".
  (d) I apply changes and then run the page.
  
  I'll be back will be name of the current user with "MY_SHORTCUT" appended/added immediately after the user name - for example. the string:-' BRAD «MY_SHORTCUT»»
  
  Question is - how to stop the shortcut/reference text "MY_SHORTCUT" to be added to the variable you want to see the and thereafter on your page? I am just wanting the variable, NOT the reference for the shortcut.  I do something wrong using the HTP package, and if yes, what should I use?
  
  If "MY_SHORTCUT" is defined as "HTML text with special characters escaped" (where I can refer to elements of application using the syntax '& USER.') so that everything works correctly. My reason for using the PL/SQL is to generate a more dynamic output variable, based on elements of application throughout the entire application - and of course the use of shortcuts to minimize coding and duplication.
  
  
  Thanks in advance,
  Brad

  Hello

  The body of the PL/SQL function must RETURN a value.

  Try:

  RETURN :APP_USER;
  

  Andy

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• How can I set the password for iPad 2 Air to something else than "immediately"?

  I have three iPad, iPad 2, iPad 2 Air and tha iPad Pro.

  My iPad 2 Air gives me the option to "set the password immediately".

  the other two iPads give options, for example, 15 minutes, 1 hour, etc.

  All three iPads running the latest IOS.

  is this a glitch with my iPad 2 Air or are they all like that?

  Why the 'immediately' is the only option? It looks like the other options are missing.

  Thank you.

  Try the help in this support article > using a password with your iPhone, iPad or iPod touch - Apple Support

• Cannot create a shortcut on the desktop for a Web site in the browser Firefox Tor

  I am a user of Tor Browser, and I love the interface of Firefox. According to my page, my Firefox browser is up-to-date. But for some reason I can't save shortcuts to office for a Web site. Whenever I drag the icon beside a Web site (variously a glob, a green bolt and other icons), I get a mouse icon of denial no matter where I try to put the web shortcut on the desktop. This happens even when I drag the bookmarks of my bookmark bar! My guess is that something is blocked in Tor allowing no shortcuts settings. Any suggestions on where the parameters of the shortcuts are in Firefox?

  Fred, all other modules worked well. I contacted the people of Tor, and they were unsure of what's going on. I've pasted their response below, but the short answer is that they have me just save shortcuts manually from the office whenever the Tor Button is active. Thanks for your help, you've been great!

  4.1 proxy obedience of
  https://www.torproject.org/projects/torbrowser/design/

  Point 3 of the quote:
  < < < < Begin quote > > > >
  Drag events filtering and blocking the external application

  External applications can be induced to load files that perform network
  activity. Unfortunately, there are cases where these applications can be launched
  automatically with little or no user intervention. To avoid this,
  Torbutton installs a component to provide the user with a popup when
  the browser is trying to launch a helper application.

  In addition, modern desktop computers now preemptively look for all URLS in drag
  and events move as soon as the drag is initiated. This download happens
  independently Tor browser setting and can be triggered by
  something as simple as holding the mouse button for a little too
  time by clicking a link to the image. Filter us drag and drop events
  events of Torbutton before the OS downloads the URL contained events.
  < < < < < snippet > > > > >