ADF: Calling an AMImpl method before the launch of an adf:PopUp

Similar Questions

• Is it possible to call a custom method in the App Module to a backing bean?

  I would like to know if a custom in the App Module method can be called from inside of a pod of support.
  I don't know if it is logically just call, to a backing bean, a custom in the App Module method. But I would like to know if this is necessary or if it is possible.

  Hello..
  Yes it is possible. You must add this interface method customer of AppModule.Now you can see this method in data Controls(Refresh the data control). To call this method using bean, should be added as an action method links (click on links > + > methodAction > and create the binding of the action).
  Now, you can call this method in the bean class.
  Check like uses this concept to run the display criteria

  http://ADF-Lk.blogspot.com/2011/05/Oracle-ADF-create-view-criteria-and_4727.html

• Why Windows 8 have a long delay before the launch of startup programs

  In Windows 8 there is a long enough period for the launch of the programs in the startup folder or in the register as startup items. Why is this? And how can I remove or reduce the delay? Please note that this is not a problem with too many programs trying to launch. There is that one program listed on startup with a new installation of Windows 8 and the system is running on an SSD. It's so clear and deliberate, time not only a slow system.

  Reading this thread, I just want to point that Microsoft quality replies here, it's horrible, beyond and Microsoft should be embarrassed to make them like that in public. I recommend delete them all and by publishing an adequate solution.

  Reminder: The OP says that he is a clean install. They moved just a program in the startup folder and they're asking why - this delay, indicating precisely is not a slow computer. The advice they get is:

  -Run the diagnostic system

  -Start in Safe Mode

  Hello? This is a clean install! Of course, none of this assistance.

  What actually happened is that there is, as the OP stated, before advisement in Windows 8 delay as all the start-up programs are executed.

  It can be flown in the key HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Serialize\Startupdelayinmsec in the registry (including the set to 0, then the programs are executed immediately).

  It is the response that should come from Microsoft. Everything else is a rubbish - model answers that everyone make Microsoft look green, as if they a) don't know their own product and b) don't care even clients who need assistance.

  The Bing team should also be ashamed of this site as their best result. Google does not work.

• Call a method before the following operation to set the selected values

  Use case: I display a VO as an ADF multiple checkbox select. This VO is the detail of a master/detail. I managed to store the selection state in a bean managed on autoSubmit. Then the user navigate to the record of the master, and then goes back to the previous record. The buttons next and previous were created using operations in data controls. I want to back up the State of the selection by clicking previous or next.

  There are a lot of tutorial on how to get the selected values, but none on how to set the selected values. How would you do it?

  11 GR 1 material JDev

  What I ended up doing:

  1 redefine listener action for the navigation buttons

  {} public void nextQuestion (ActionEvent event)

  saveSelectedState();

  navigateQuestion ("Next");

  restoreSelectedState();

  }

  {} private void navigateQuestion (string operation)

  OperationBinding operationBinding = ADFUtils.findOperation (operation);

  operationBinding.execute ();

  }

  2 Save and restore the selection state using bindings

  Guava Multimap

  Private ListMultimap selectedIndices.

  private void saveSelectedState() {}

  Get id question

  DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

  Question of rank = questionBinding.getCurrentRow ();

  Number questionId = (Number) question.getAttribute ("Id");

  JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

  int [] valueIndices = listBinding.getSelectedIndices ();

  selectedIndices.putAll (questionId, Ints.asList (valueIndices));

  }

  private void restoreSelectedState() {}

  Get id question

  DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

  Question of rank = questionBinding.getCurrentRow ();

  Number questionId = (Number) question.getAttribute ("Id");

  int [] valueIndices = Ints.toArray (selectedIndices.get (questionId));

  JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

  listBinding.setSelectedIndices (valueIndices);

  }

• How to call support bean method when the user moves out of field of af: inputListOfValues

  Hello

  I use jdev 11.1.2.4.

  I want to call a method of bean of support depending on the value selected in the af:inputListOfValues field.

  The requirement is similar as Frank Nimphius-Oracle has shown here https://blogs.oracle.com/jdevotnharvest/entry/how_to_notify_the_server but with component input list of values.

  The areas I want to call the method is

  <af:inputListOfValues id="appealNameId"
                        popupTitle="Search and Select: #{bindings.AppealName.hints.label}"
                        value="#{bindings.AppealName.inputValue}"
                        label="#{bindings.AppealName.hints.label}"
                        model="#{bindings.AppealName.listOfValuesModel}"
                        required="#{bindings.AppealName.hints.mandatory}"
                        columns="#{bindings.AppealName.hints.displayWidth}"
                        shortDesc="#{bindings.AppealName.hints.tooltip}"
                        binding="#{backingBeanScope.backing_Donation.appealNameId}"
                        autoSubmit="true" clientComponent="false">
                        <f:validator binding="#{bindings.AppealName.validator}"/>
                        <af:autoSuggestBehavior suggestedItems="#{backingBeanScope.backing_Donation.onSuggestAppeal}"/>
                        <af:clientListener method="onBlurTxtField" type="blur"/>
  </af:inputListOfValues>
  <af:serverListener type="onBlurNotifyServer"
                     method="#{backingBeanScope.backing_Donation.onBlurNotify}"/>
                        
  

  as you can see, af:serverListener is outside the af: inputListOfValues which is probably the reason why this isn't executing this method?

  public void onBlurNotify(ClientEvent clientEvent) {
     // get a hold of the input text component
     RichSelectOneChoice inputTxt =  (RichSelectOneChoice) clientEvent.getComponent(); 
     //do some work on it here (e.g. manipulating its readOnly state)
     //…
     //Get access to the payload
      
     Map  parameters = clientEvent.getParameters();
     System.out.println("SubmittedValue = "+parameters.get("submittedValue"));
     System.out.println("LocalValue =  "+parameters.get("localValue"));
     }
  

  I tried to put the serverListener tag inside the < af:inputListOfValues > but get error below

  "Listener server is not a valid child of list of values of the entry.

  
  

  any ideas please?

  Thank you

  As first, make sure you use a correct type for af:serverListener (Traore we are you queue in the javaScript onBlurTxtField function)

  If still not working, go directly to the source code page, and put af:serverListener 'manually', as a child for af:inputListOfValues.

  Because it is possible that these messages are false alarms...

• Confirmation to the user before the launch of BR

  Hello

  We have clear data BR and warning would need the user / confirmation message so that users are very careful when running it. He should ask users like "are you sure you want to clear data for" + name Var

  I've explored @return but stop calculations. This seems to be the simple requirement. y at - it a simple option that will allow the users before they the execution of business rules.

  would appreciate if you can share your experience.

  concerning

  Just to expand on my previous post, I got the chance to test and it does not work with an RTP.  in my example, I've set up a RTP with type as a string, and then using a string comparison, I checked to see if the value is equal to 'YES '.

  Here is the part of the rule that matters in my case Yes condition simply results in a different error, but you could change it around to fit your need.

  IF (@hspstringcompare ({RTP_AreYouSure}, 'YES'))

  @RETURN ("You were sure!", ERROR);

  ON THE OTHER

  @RETURN ("' I don't know were you?", ERROR ");

  ENDIF;

  

  

  I hope this helps.

• Direction Pro CC 2015 works when I turn off my map 7730 m AMD Radeon, otherwise it closes just before the launch. Any ideas?

  I can't understand how to operate the first CC 2015 with my GPU (AMD Radeon 7730 M). It gives me an error message and not the lauch. Whenever I have to disable the card so I can launch the first. I worked very well with the 2014 version. Then I've upgraded and CC 2015 and it will not start. I read some people saying there is a conflict with some AMD drivers, then I disabled my card and first CC 2015 really worked without computers. Someone had this problem?

  Since you can see things on your computer and working with Pr off AMD card, you probably have a graphic chip Intel integrated on your CPU or the motherboard.  I activate the AMD card, then turn off the Intel chip in the Device Manager or the BIOS/UEFI.  Which should allow Pr work with the AMD card and do all kinds of goodness OpenCL available to you.

  See you soon,.

  Jeff

• How can I get music, web and mail on my laptop series pavilion dv3 before the launch of windows.

  Initially on my laptop start subscribe to service music & web without starting windows... After a few updates... its lost hw can I get it back...

  Click Start and in the bar "search programs and files" in "Quickweb" and it should appear

  HP QuickWeb Configuration tool
  HP QuickWeb help

  Click on "QuickWeb Configuration Tool" and it will bring up the QuickWeb window on the 'Home tab ' tab 'Status' and then 'activate', then 'OK '.

  If it doesn't, check in the BIOS:

  1. open the configuration utility by turn on or restart the computer.

  2 immediately press f10 continuously to enter the configuration utility.

  3 use the right arrow key to tab on the menu headers and select System Configuration.

  4 use the down arrow key to select A Support Instant Web. Press ENTER.

  5 use the arrow key to select enableor disable . Press ENTER to make your selection.

  6. press f10 to save your changes.

  7 select Yes to confirm. The system will restart.

• ADF Popup showing not the responsibility of fragment

  Hello

  I am calling a bean method in the accessor Get of CommandLink to the load in the binder to a command link defined in the bean, so when this fragment is called from another fragment then

  in this method I m did some checking and based on a specific condition, I have popup.show but it does not show the popup code does not any exception.

  public RichCommandLink getC1() {}

  PopulateData();

  return to c1;

  }

  Now, in populatedata, I popup shown for some disorders but when fragment is called for the first time it does not show the popup, but same populatedata is called the fragment button

  so when I click the button, the popup is displayed correctly.

  So if I understand correctly the first time getC1 is returned when the fragment load, so how this popup appears in this...

  Public Sub populatedata()

  {

  If...

  {

  System.out.println ("popup display");

  RichPopup.PopupHints p2 = new RichPopup.PopupHints ();

  P1. Show (P2);

  System.out.println ("after the popup display");

  }

  }

  In the newspapers, I see the two system messages, you guys can suggest me how to get this popup appears when the fragment of loading for the first time and the get accessor for the c1 is going to get fired.

  JDeveloper version: 11.1.2.3.0

  Kind regards

  Hello

  you have debugged the method call to prove that it is called at all? Instead of a binding component as a trigger, you can try a value property, for example on a hidden output text element?

  Since you're on JDeveloper 11 g R2, the use of the events of the JSF 2 system becomes also possible. The event system would be added to a component on the fragment (for example the fragment root layout container) and then listen to the phase of rendering pre-rendered.

  See: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/108-triggerpopupinregion-1994836.pdf

  Frank

• Methods of the AMF

  This PHP function remote call via AMF:

  
  trace (zendAmfService.getLastName('John'));

  output to the console:

  [AsyncToken object]
  
  But it should display a string (surname of John). What I am doing wrong?

  Alternatively, you can listen for events ResultEvent and ResultEvent to the service. AMF calls are asynchronous, so the results are not available when the method call returns. As another poster pointed out, you get an AsyncToken that is related to this particular call from the remote control. If you call a single method on the service, it is easier to simply add listeners for events service. If you do something more complex, the AsyncTokens are the way to go.

• Can we call a method before and after the operations of export in ADF 11 g

  Hello
  My problem is that I have to run a method before and after the export operation. Is this posible in ADF 11 g
  
  Kind regards
  Felix

  Hello

  in response to a post of similatr of yours, I said

  1 drop af:exportCollectionActionListener on a command button
  2. set the control knob to display = false
  3. in your Java code, call

  ActionEvent ae = new ActionEvent (button);
  AE.queue ();

  Everything you put in front

  ActionEvent ae = new ActionEvent (button);
  AE.queue ();

  will be like a before trigger fires, everything that follows as a trigger of post

  Frank

• method of before the Phase of initMethod() in view calling several times:

  Hello world
  
  I dragged a table as read-only table with simple rank of verified selection.
  A button to go there in the page.
  The code in the go button takes the curretn by selecting the current row and the values of print.
  The initMethod() code is execution of the VO.
  
  The problem is when the page load the initMethod() (before the phase in view) calls several times even after loading the page.
  Continuously its call to this method.
  
  How to call only once when the page is loaded?
  
  All suggestions will be really useful.
  
  Thank you.

  Hello Kumar,
  There are many topics on the web to achieve this.
  This is one of them
  https://blogs.Oracle.com/ADF/entry/an_epic_question_how_to

• How to set up a call to a method of bean before the rendering of a page jspx?

  What are the different ways available in ADF to configure a jspx page to a bean method is called to do something initialization before the rendering of the page?
  
  I have a default page in the workflow without terminals that need to call a method of bean every time a new query parameter is page.
  That is to say. I don't want to call the method of bean on a post (postback).
  
  I was thinking about using a method call activity, but do not know how to make the method call activity tobe called first when the default page is accessible directly via a URL.
  
  Published by: Priscilla on April 28, 2010 12:50

  You can try using invokeaction in pageDef page, something we have done in 10g.

  Published by: manieshsailoz on April 28, 2010 13:27

• JDev 11.1.2.1 method Execute (with bind variable) before the page is displayed

  Hi all
  
  I have a view object with a query that uses a variable binding. I drag the data on my .jsf page control to create a table. I create a query method on a bean in sight. The query method uses the content of one of the attributes of the bean to set the link for the query variable:
  
  vo.setNamedWhereClauseParam ("CraIdBindVar", sessionBean.getCraId ());
  
  I put a button on the page that calls the method of the request and it fills the table. That's fine, but I don't want the user to have to click the "query" button when browsing this page. I found forums dealing with create an AMImpl.jave method, create a link on the page, create an executable file for the link. It works that the method is executed until the page appears. However, the AMImpl method cannot call sessionBean.getCraid () to obtain the data required to complete the binding variable.
  
  Is it possible to run my method of view range bean before the page is displayed? Or maybe a way for the AMImpl.java method to access the range of view variable?
  
  Thank you, Steve

  Steve,
  You can drag a call method on the workflow activity. Select the new method call activity, and open the property inspector. Here you choose your bean method in the method property. Now, first of all, you go to this activity of method call, then the page.

  Timo

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think