ADF Mobile more than 2 rows using ListView

Similar Questions

• A row of Sub query returns more than 1 row!

  I'm trying to update the values in one table from another table and get the error: void line query returns More Than 1 row.
  
  I want to PRV_NAME B chart updated in the table A PRV_NAME where A.PRVID = B.PRVID where B.PRV_TYPE = M"
  
  The two paintings were all unique PRVID, however, table B has PRVID that have the same name. So the data in table B can look like this:
  
  PRVID PRV_NAME
  1234 PHOENIX MED
  1235 MED BAG
  1236 MED BAG
  1237 OVERLAND
  etc...
  
  So, as you can see are the unique PRVID, but not the PRV_NAME. Is this the reason why I get this error?
  
  I do not build the tables and have no control over what is put in them. If this is the reason for the error, is there a way to fix this?
  
  For reference, here's the request. Maybe there's something wrong with that?
  
  
  Update msb_prv_source ps
  Set ps.prv_name =
  
  (select prv00.prv00_prv_name
  of prv00_prv prv00
  Join msb_prv_source ps
  On prv00.prv00_prv_id = ps.prvid
  where prv00.prv00_prv_type = am')
  
  Published by: user12296489 on April 19, 2013 10:46

  /* Formatted on 4/19/2013 2:00:43 PM (QP5 v5.185.11230.41888) */
  MERGE INTO msb_prv_source a
       USING (SELECT *
                FROM prv00_prv
               WHERE prv00_prv_type = 'M') b
          ON (a.prv00_prv_id = b.prvi)
  WHEN MATCHED
  THEN
     UPDATE SET a.prv_name = prv00_prv_name
  

• Why am getting started on the internet with the message saying that more than one computer using the same ip address

  am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address

  am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address

  Thatmessage normally means a another computer on your local network has the same IP as the computer you are on.

  You control your Local network?

• Is it possible to send more than 100 pages using EchoSign?

  Is it possible to send more than 100 pages using EchoSign?

  Hello

  EchoSign Transaction limits: -.

  https://www.echosign.Adobe.com/en/support/knowledgebase/EchoSign_Transaction_Limits.html

  You will need to contact support to adjust the page boundary.

  Thank you

  Jat

• Performance problem of the migration of more than 500 million using OWB records.

  
  I need to migrate 500 millions of records. The structure of the table is similar to the table of scott.employee with the only exception being that the HIREDATE column is NOT NULL. The table is partitioned by using month-wise column HIREDATE. The target table is the same as the source.
  
  I used a direct correspondence with the approach based on the game but it run for more than 10 hours. I then tried to create another temporary table to store the date. I've first grouped column date and got the number for number of records by date. I have it stored in a temporary table. Then I took the first 10 dates and it is attached with the source table and inserted the result set into my target table. The performance is slightly better but still not acceptable.
  
  Can someone please help?
  
  I have the necessary indexes in place and oracle is using them. I don't know a lot about the ELP language (using OWB 10 g 2 and so I can use it), but if I understand good documentation, it changes the identity simply and does not move the data. In this case, I can't use it because I want the source data too.
  
  You will appreciate all the assistance. Thanks in advance.
  
  Concerning
  
  

  I ask you to remove data from the source.

  All I'm asking is:
  you said that your target tbal has all the lines.
  So instead of insert source to target why not make your transformation on the source table and rename the source table to target the tbalename and remove the taret table and build your constraints on source table IE

  Staged tbal - CBC - 500 million lines
  Target - TGT - 0 rows table

  create the table src_copy in select * from src - so now you have a copy of your table in the source
  do your cleaning on lines 500 million on the table of data src_copy
  build constraints on table src_copy
  drop table tgt
  Rename src_copy table table tgt.

  Do not see a problem in doing this.

• More than 1 VPN using a single interface

  I need to set up a VPN with four routers each router has different configurations but the main router has only one interface connected to the internet. Whenever I try to put in place more than a VPN on the same interface, it gives me an error that you have a VPN running on this interface, and it can be done, without taking into account this error will cost me VPN downwards from the previous site.

  You must use the same card encryption, with the values of different priority (10 for the site-to-site first, 20 for the second), as the only card encryption can be applied on a given interface.

  Please rate if this helped.

  Kind regards

  Daniel

• Exit SQL query more than 65000 rows in excel

  Hello
  
  I have a SQL file attached to my simultaneous program. The query in the SQL file returns output separate tab I need to e-mail as a CSV via the same SQL file.
  
  The issue I'm facing is that the query returns the records about 157000 but only 65536 are displayed in the excel worksheet.
  
  How can I get all the records by welcoming them in several worksheets in the same excel file?
  
  Help, please!
  
  I use EBS 11i.
  
  The code I use in the SQL file:
  
  set of 3000 pages
  fixed-line 300
  set the position
  fixed term off
  Set feedback off
  set verify off
  trigger the echo
  off Set serverout
  
  coil /tmp/TEST.csv
  
  Select 'head '.
  of the double
  /
  
  SELECT column1 | CHR (9) | Column2
  OF staging_table
  /
  
  spool off
  
  
  fixed lines 1000 pages 40 Parry echo off veri off
  Select ' cd/tmp; Cat $XX_TOP/install/sql/disclaimer.txt > x.dat; Cat ' |' /tmp/test.csv'||' | UUEncode ' |' /tmp/test.csv'
  ||' > '|| substr('/tmp/test.csv',1,length('/tmp/test.csv')-4) |'. DAT > > x.dat'
  ||' ; mail-s "' |' & 1' |" ' ' |' & 2' |' < x.dat'
  ||' ; RM ' | substr('/tmp/test.csv',1,length('/tmp/test.csv')-4) |'. dat' | ' ;'
  of the double
  
  list
  coil /tmp/email.txt
  /
  spool off
  host chmod 777 /tmp/email.txt
  Home /tmp/email.txt
  
  Thank you
  
  Published by: user10648285 on May 13, 2011 05:27

  {message: id = 9360007}

  You can also upgrade your version of Excel as the latest versions contain more than 65K lines

• I can't get my new Nikon D 810 raw file to load in Lightroom. I did this same thing for more than a year using a Nikon D800.

  When I go to add my raw files, as I have always said that it cannot read the raw files. I called Nikon one told me that in the D810 raw files are the same as the D800. Something is in place.

  Re: D810/Lightroom5 import Raw files

  Raw files are not the same as the willing D810 with a different sensor than the D800. The layout of the file may be the same, but this does not mean any software that supports the D800 will support the D810. Adobe has the new camera profile and add calibration profiles and then release an update to Lightroom. ACR 8.6 RC supports the D810, LR 5.6 will support the D810 probably too. For now, you can convert the nef files to DNG using the dng converter that comes with 8.6 ACR: Adobe Photoshop Camera Raw 8.6 RC CC and CC 2014 Release Candidate: support files raw digital camera - Adobe Labs

• EXTRACTVALUE returns more than one row error

  Hi gurus
  
  I have XML file, now I would like to write an SQL to convert tabular. Whne I try to use
  
  EXTRACTVALUE
  (XML_MESSAGE,
  ' / ATMWithDrawTrans/Trans/Tran/TranDate.
  
  I'm ExtractValue returns multiple rows. Could you please help me find a query that retrieves these sub table form.
  
  < ATMWithDrawTrans >
  < Trans >
  < Tran >
  < TranDate > 2001 - 09 - 10 < / TranDate >
  < amount > 105 < / amount >
  < / Tran >
  < Tran >
  < TranDate > 2002 - 03 - 10 < / TranDate >
  < amount > 105 < / amount >
  < / Tran >
  < Tran >
  < TranDate > 2002 - 09 - 10 < / TranDate >
  < amount > 104 < / amount >
  < / Tran >
  < Tran >
  < TranDate > 2003 - 03 - 10 < / TranDate >
  < amount > 104 < / amount >
  < / Tran >
  < Tran >
  < TranDate > 2003 - 09 - 10 < / TranDate >
  < amount > 103 < / amount >
  < / Tran >
  < / Trans >
  < / ATMWithDrawTrans >
  
  TIA
  
  Published by: 870046 on July 25, 2011 08:50

  XMLTable will do what you want.

  For example, assuming XML_MESSAGE is a database of XMLType column:

  select x.*
  from your_table t
     , xmltable('/ATMWithDrawTrans/Trans/Tran'
         passing t.xml_message
         columns tran_date date   path 'TranDate'
               , amount    number path 'amount'
       ) x
  ;
  

  If your version does not support, see XMLSequence in the documentation.

• more than 8600: adjust using ink

  I just bought and installed an OfficeJet Pro 8600, replace a 8500. On the 8500, in addition to selecting the modes project, normal or better, there were sliders to adjust the amount of ink and the drying time ('less' to 'plus'). In 'normal' mode, the 8600 is put so much ink on the page that the paper is wet and heavy. I can not find a method to reduce the amount of ink in the preferences of 8600. A deleted HP client's ability to change the use of ink?

  No, it's the quality only (normal best project), not an amount of adjustment of ink like the 8500. I received an email from HP support... "Sorry, this feature is not available on the 8600." The 8600 will drink the ink, so it's going back to Staples.

• Oracle to send email with the size of the content of more than 32 k using UTL_SMTP

  Hi all

  I Googled, and also searched the oracle forums and I did not find a good link to see when dealing with sending e-mails with content size over 32 k using UTL_SMTP. If someone can you please direct me to some links that would be a great help.

  Thank you

  Rambeau

  It's because you first set 'Hello World,' mailBody (mailBody.COUNT) and then immediately replace by "test sample". Maybe you wanted to EXTEND between postings...

• single row subquery returns more than 1 row

  UPDATE Rftm_Pidwise_Revenue_Dtls
  SET cost_prior_qtr = (select cost_forecast_end
  of rftm_time_entry_calc
  where rftm_time_entry_calc.pid = Rftm_Pidwise_Revenue_Dtls.pid
  AND rftm_time_entry_calc.ideal_ref_no = Rftm_Pidwise_Revenue_Dtls.ideal_ref_no
  )
  WHERE ideal_ref_no = '140014';
  
  Hi all
  I have a requirement where I have to update a table (Rftm_Pidwise_Revenue_Dtls) and the value of the column 'cost' to the ' 140014 ideal_ref_no'. for this issue, there are several records in the tables that I use in my application. I want to match the corresponding 'pid' and update the cost for each "pid".
  Please help me with a correct query.
  
  Kind regards
  Belin

  Try once...(untested)
  
  MERGE INTO Rftm_Pidwise_Revenue_Dtls TRG
  using
  (
  select DISTINCT A.cost_forecast_end cost_forecast_end,B.ROWID RI
  from rftm_time_entry_calc A,Rftm_Pidwise_Revenue_Dtls B
  where A.pid=B.pid
  AND A.ideal_ref_no=B.ideal_ref_no
  AND B.ideal_ref_no='140014';
  ) SRC
  on
  (TRG.ROWID=SRC.RI)
  WHEN MATCHED THEN UPDATE
  SET TRG.cost_prior_qtr =SRC.cost_forecast_end;
  

• Deployment on ADF Mobile (Android emulator) problem

  Nice day

  I use Jdeveloper 11.1.2.3.0

  I have a problem when deploying my app on the Android emulator. Here is the log:

  [13: 54:56] update Android profile dependencies with FAR profiles created from application projects...

  [13: 54:56]-deployment began.  ----

  [13: 54:56] the target platform's (Android).

  [13: 54:56] early deployment of ADF Mobile application 'FirstMobileApp' in Android using «TestProfile» profile

  [13: 54:56] check the State of the Android Debug Bridge server...

  [13: 54:56] Server Android Debug Bridge already running.

  [13:55] check a single Android emulator is online and connected to the ADB server...

  [13:55] early deployment of ADF Mobile application 'FirstMobileApp' in Android using «TestProfile» profile

  [13:55] analysis of the dependence running...

  [13:55] building...

  [13:55] deployment of 3 profiles...

  [13: 55:01] wrote the Archives Module to C:\JDeveloper\mywork\FirstMobileApp\ApplicationController\deploy\ApplicationController.jar

  [13: 55:01] wrote the Archives Module to C:\JDeveloper\mywork\FirstMobileApp\ViewController\deploy\ViewController.jar

  [13: 55:01] start preparing the package...

  [13: 55:07] check the Application Controller project exists...

  [13: 55:07] checking dependencies of applications...

  [13: 55:07] Validation of the application XML files...

  [13: 55:07] Validation of the XML files in the ApplicationController project...

  [13: 55:07] Validation of the XML files in the ViewController project...

  [13: 55:08] copy of FARs in the application of the Mobile ADF framework...

  [13: 55:08] far from the source of the copy: ViewController...

  [13: 55:08] copy by far the source: ApplicationController...

  [13: 55:08] copy of resource files java framework...

  [13: 55:24] copy of the common javascript files...

  [13: 55:38] deployment of counting files...

  [13: 55:38] copy of the application image files...

  [13: 55:38] copy of the ADF Mobile configuration files...

  [13: 55:38] .adf files...

  [13: 55:38] copy of file security related to the application of the Mobile ADF framework...

  [13: 55:38] Creation of preferences Android XML files...

  [13: 55:39] creating AndroidManifest.xml file...

  [13: 55:39] Creation of unsigned Android application file...

  [13: 55:50] compile the file of the Android resource identifier...

  [13: 55:52] create file classes.dex Android since the class files...

  [13: 55:54] run command line: ['C:\Users\Nasir Amin\AppData\Local\Android\sdk1\platform-tools\dx.bat»,--dex,--keep-classes,--output="C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes.dex', C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\AND_ksoap.jar, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\Container.jar, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\IDMMobileSDK.jar] C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\logging_dalvik_release.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\phonegap.jar, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\vmchannel_dalvik_release.jar]

  [13: 55:54] "" C:\Windows\system32\java.exe"" is not recognized as an internal or external, order

  [13: 55:54] operable program or batch file.

  [13: 55:54] command-line execution failed (return code: 1).

  [13: 55:54] run command line: 'C:\Users\Nasir Amin\AppData\Local\Android\sdk1\platform-tools\dx.bat»--dex--keep-classes--output="C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes.dex' C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\AND_ksoap.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\Container.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\IDMMobileSDK.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\logging_dalvik_release.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\ framework\build\ jar\phonegap.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\vmchannel_dalvik_release.jar

  [13: 55:54] undeployment.

  [13: 55:54] - incomplete deployment.

  [13: 55:54] deployment failed due to one or more errors returned by "C:\Users\Nasir Amin\AppData\Local\Android\sdk1\platform-tools\dx.bat".  What follows is a summary of the returned error:

  Command-line execution failed (return code: 1).

  You have Java 1.6 installed SDK? If Yes, can you specify the environment variable JAVA_HOME for this?

  

  See you soon

  AJ

• More than 15 lines in a report

  Hello

  I use a report and you want to display more than 15 rows without using pagination. I already tried to increase the number of lines of 15 to a higher value, but I does not work.

  And is there a way to avoid to reload the entire page after clicking on the button of pagination in the report?

  Thanks in advance...

  Tarek says:

  I use a report and you want to display more than 15 rows without using pagination. I already tried to increase the number of lines of 15 to a higher value, but I does not work.

  Pagination settings are cached for the duration of the session. After changing the lines by the value of the page in the report attributes, log off, restart the brower and connect again or manually re - request the page from the browser's address bar, adding 'RP' in the ClearCache position in the URL.

  And is there a way to avoid to reload the entire page after clicking on the button of pagination in the report?

  For regions classic report and tabular forms, use the report property allow partial Page Refresh to specify that only the lines of the report for each set of pagination are requested, rather than refreshing the whole page.

• Once I updated to Firefox 11, I can't open the pdf files. It's more the computer, snow leopard and lion and more than one Web site.

  I've updated to Firefox 11 and now I can't open the PDFs Online. This has happened on more than 1 computer, using the two OS 10.6.8 and OS 7.0 and on more than one Web site. I tried to uncheck "block pop-up windows" in preferences, but which did not help.
  When I use Safari to open the same file to pdf, they open fine. Everything worked fine with my Firefox until I did the upgrade.

  I prefer to continue to use Firefox, but I can't understand the root of the problem.

  Has anyone else had this happen as well?

  Thank you, gentlemen, to find a "solution" to this particular behavior of Firefox. It is really curious that even if the screen is blank, you can indeed save the .pdf Ghost and then open the saved file to view. What is amazing to me is that this issue does not seem to be what makes the hit parade of the problems currently experienced Mozilla. Not everyone will be willing to do a research project extended rather than leave the ship for Safari, etc..