adjust the timing of all objects

Similar Questions

• How can I export the schema with all objects and a few tables without data

  Hi all
  
  Verion 10g EA.
  I export the schema with all objects but I need ignored some of the data in the table.
  
  There is a table 4 people gave huge, we need not to export data from tables but structure must export.
  
  
  Thank you
  Nr

  You can do this with a single command.  Run your export as usual and add the query parameters for 4 tables you want all the lines:

  expdp... query = schema1.table1: "where rownum = 0" query = schema2.table2: 'where rownum = 0'...

  It is best to place the query parameters in a parameter file if you don't have to worry about escaping special characters of the OS.

  Dean

• Can I adjust the speed of all the clips at the same time at the same speed in imovie10.1?

  I have a lot of slides / photos and prefer to adjust the speed of each of them at the same speed of s 3.0 at a time without going through each one.  When I do, it does not apply.  How can I do this?

  In iMovie 10.1.1 Select all photo clips in your timeline.  Click on the button info (an ' i' with a circle around it), top right of your screen. Enter your length of stay in the duration box that appears at the top right. Press return on your keyboard.   All your photos will now have the time that you set.

  Another way: before you open a new project, go to iMovie/preferences and set your default clip duration in the duration of clips.

• Access to all the properties of all objects in a Subvi

  Dear all

  I need to change some properties of the objects on the front panel in an another Subvi, I don't want to do a 'reference' for each object, and then manipulate its properties in an another Subvi, I want to send some how a reference that contains information for all the subjects in the subVIand and then finally within the Subvi I decide about the objects and their properties that I'm about to manipulate.

  So far, I sent the reference to "ThisVI" in my Subvi and try to access "all objects []" on the Panel and then try to query all objects corresponding to my object to and then manipulate the properties I want (attached image). But the problem is that the properties are different from each specific objecton Panel and I am not as free asI was the main VI.

  For example in the attached picture, is it possible to change a Boolean value in this way?

  Thanks in advance!

  Best regards

  Afshin

  

  

  Afshin salvation,

  Yes it works also for other references like graphical waveform. If you use the constant class to more specific "strict refnum", then you get all properties for this purpose.

  Mike

• How to adjust the timing of any effect in After Effects?

  I want to make a building bursting at a precise moment of my video (using the shatter plugin). However, when I add the effect, it does not seem to give me options to adjust the schedule. I think it has something to do with a stopwatch, but I don't know how to use the stopwatch thng.

  Help, please!

  Thank you

  If you type "burst" in aid of field research in the upper right of EI the first link takes you the After Effects / effects Simulation help page. If you click on the effect of brightness (the sixth link in the list) need you specific instructions for the glow effect where the strength and the RADIUS are explained in the first paragraph. There are also links to a bunch of tutorials and other resources for the effect. Further down, you will find a more detailed description of the controls Force 1 and 2 Force including the citation that Todd gave above.

  I'm not doubting that you gave a glance before replying, but too many people expect that everything in AE has a simple click and solve the solution. More read you, the more you use the tools and community resources, you will learn how things work and the best and faster you will become to your business. In fact, I spend about 2 hours a week, just read more stuff in the help files that I have not watched for a while, just to stand. I also use the search box in help in AE all the time to check other possible techniques used by others in the community of the AE. If you do this then you will become a better artist in less time. Relying on the forums of users for a click and solve solution won't do much to help you learn how to work the AE.

• How to adjust the timing of the migration of the Substitution Variables in the planning

  Hello
  After we update Variable of Substitution, we noticed that it take a 5 minutes before it flows planning
  I read somewhere that there is a way to adjust the altimeter (5 minutes) of the migration of the Substitution Variables in the planning. Someone knows where it is?

  Hello

  You must set a property, the details are all here:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch06s03s12.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is an effective way to adjust the position of all the clips on the timeline

  In one of my projects, I leave cuts on a timeline. And it seems that the position of a few clips has been accidentally changes. I need to have the same position for all the clips. Is there a way to define the position of all the clips in the world - what is the best way to tacke this? Thanks in advance. -renized

  Press A key for the track Selection tool.  Click the first clip that you want to settle and every item after that will be also selected.  You can move them as a group.

  If you need clips on more than a selected track, hold CTRL when you click.

• Is it possible to know if transparency (multiply / darken etc.) has been used in any part of the file select all objects?

  I recently had problems with Illustrator files with objects and text.

  These elements consist of spot colors and have effects, such as multiply, obscure or Luminisity applied to them.

  Our current workflow requires us to save the only 1 file .ai to PDF which must pass through a TEAR, then accelerated for printing by other software.

  Version staircase to the top of the file is sent to me, opened and edited in Illustrator and then re-recorded in PDF format to send to a print finisher (varnish or sheet, for example)

  It is at this point that some items were not displayed correctly or at all.

  I know that sounds complicated process (and is!)... but is it possible to work around this issue?

  Thank you

  The Flattener Preview Panel?

  Check "all transparent objects.

• HP 15-r007TX: cannot adjust the brightness. need all drivers.

  can't download drivers for hp 15-r007TX, 10 (64-bit) Windows.

  Help, please.

  Hello

  Try the following.

  Download the graphics card Intel HD software package on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72370.exe

  Once complete, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69575.exe

  Once completed the resettlement of Chipset, do not restart as guest - rather open your download folder, click with the right button on the Intel HD Graphics software package and select "Run as Administrator" to launch the installation.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Structure off the diagram deletes all objects contained in it after the removal of the structure.

  
  
  

• How, in Illustrator CS5, select all objects with the three points (or nodes)?

  I'm fairly new to Illustrator, but it seems like it should be simple.  (It's trivial in CorelDraw X 4: after selecting an object with three knots, I go to Edition > search and replace > find objects > find objects that correspond to the currently selected object and navigate the menus left.)

  In Illustrator CS5, select options > identical do not seem to include the selection of all objects with the same number of nodes under the currently selected object.

  A double click on the magic wand tool also does not provide such an option.

  Thanks for any help.

  PS also useful would be knowing how to add other criteria to this search, for example, how to select all objects with three points * and * the current fill color.

  advictoriam,

  I'm afraid that you have better luck with the number of anchor Point.

• Improvement of the feature: set the timing of mouse separated from slide

  We need the ability to adjust the timing of mouse separately by the timing. For example: I want to have the visible slide for 15 seconds. I want the mouse appear immediately (when the slide appears 0.0 seconds). So, I want the mouse to 'travel' to about 2.5 seconds. However, when I save the file and look at the slide, Captivate allows you to set the mouse appear 0.0 seconds after the slide appears, but now the mouse takes 15 seconds to 'trip '. When the distance between objects on the screen is light, the mouse movement is almost imperceptible.
  
  Thanks, DBlake

  Unfortunately, the function of the chronology and the functionality of the properties for the mouse seem to work differently. I continued to change the properties of the mouse and setting the properties of the slide. Then when I went to another slide and came back, I noticed that Captivate automatically changed the properties of the mouse in order to integrate the length of time of the slide. However, using the method of drag timeline seems to solve the problem. I am happy to know that we can solve the problem, but I think we can have a bug on our hands.

  I'll be passing the method timeline along as the solution for our team. Thank you for all your help. -DBlake

• Cannot adjust the brightness of the screen after the new installation of Windows 7

  I have a Pavilion dv2945se notebook. I have completely updated the Nvidia geforce 7150 m drivers. My laptop came with Windows Vista Home Premium 64-bit, and I did a new install of Windows 7 Home Premium 64-bit. I can't adjust the brightness of the display. I narrowed down the problem to the generic PnP Monitor driver. How can I solve this problem?

  Edit: I mean "impossible to adjust the brightness of the display" that every time I go into power options and trying to use the cursor, Windows Explorer crashes. Also, my fn + F7 and F8 keys light work before I connect to windows, but not after. I think that something will charge when I connect to windows that is causing the problem. So I went in Mode safe, but then all that allows to control the brightness has not loaded when I went into safe mode, which was not helpful. I also went into MSConfig and disabled all startup programs, but again, I have the same problem. The brightness of the keys work before connect you to Windows, but not thereafter.

  When I turn off the device generic PnP monitor (1) can't adjust the brightness at all and (2) the Power Options window stops freezing. That's how I've narrowed the problem to the generic PnP Monitor driver.

  I finally solved this by uninstalling the driver for the ALPS touchpad. Because there are no Windows 7 drivers for my laptop even though it is listed in the models capable of upgrading to Windows 7, I used Windows Vista touchpad drivers. It was the cause of my problem with brightness adjustment. I don't know why it worked, but I've narrowed it down by disabling all processes start and then from their one at a time to see what caused the problem. As soon as I started Apoint.exe, I started to have problems.

  Now, I just have to find a way to disable the touchpad tapping without the ALPS drivers.

• The timing tab continues to go far

  I keep having to close and reopen the properties to get the timing tab to display.  It will be there for a while, then finally I'll change the "timing" on an object and it won't be there.  Fair 'properties' completely through.  Boring!-any help appreciated.  Thanks, Jenny

  Hello

  Yep, it's boring!

  I noticed that Adobe announced today the availability of a version of service for version 8. Maybe if you update it will alleviate the problem. I'm not sure. But it's usually a good idea to stay on top of updates.

  Often, we update by clicking Help > updates in Captivate.

  See you soon... Rick

• IDCS3 Mac application effects change the color of the images and other objects

  Something strange happens in InDesign CS3. Hope someone can help me.

  When I apply an effect such as drop shadow to an object the colors of all other objects on the page change. When I say change I mean almost like the profile (for example, RGB to CMYK) conversion. The colors change all objects on the page but does not affect objects on other pages of the same document. Applying an effect such as shade or gradient change the profiles of other objects color?

  Very confusing. Is this a bug or I do something wrong?

  I'm on a Powermac G5 Tiger running. My color settings are ProPhoto RGB (bridge of thought) and slept Fogra 39 for CMYK.

  Profile incompatibilities are defined to preserve incorporated for RGB and CMYK profiles.

  Concerning

  Jach

  Try to change > merger of transparencies... space and replace it with Document RGB.