Adobe Flash Pro CS6 motion tween question...

Similar Questions

• I need help setting up adobe flash pro cs6 trial verson PROBLEM

  When I click on connection in adobe flash pro cs6, it says im not connected to the internet when I help am.plz!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Facilitate the installation of Adobe installs Adobe Flash Pro CS6 rather

  I go to the adobe Web site and clicking on download CC animate and it installs Flash Pro CS6 instead. In The Cloud Creative app that animate isn't there, but Flash Pro CS6 is.

  You are on a 64 bit OS? If you are on a 32 bit OS, you will not be able to install and use Adobe animate, that is why it is not displayed.

• Adobe Flash Pro CS6 has no smooth curves

  Hey guysI have recently upgraded to Flash Pro CS5 to Cs6, but I have a weird problem.
  I can not use the pen to make smooth curves.
  It is a record of the problem:

  any ideas?

  I thank in advance

  Adjust your drawing preferences as well. If he recognizes the shapes/lines/etc, he'll try to optimize it.

  Here's a panel CS5.5 but CS6 shouldn't be too far:

  

  He asked to recognize straight lines or shapes, you begin to get these angled/straight lines.

• How to install the latest version of the SDK of AIR (13 or 14) in Flash Pro CS6?

  Hi, I use Adobe Flash Pro CS6 on Windows 7 64 bit and I tried to add the latest Adobe AIR SDK, either 13 or 14, but non of them is considered as an SDK to be valid by Flash.

  I tried two possible SDKs (SDK & compiler and SDK without compiler) to download here: Download Adobe AIR SDK (version 13) and here http://labs.adobe.com/downloads/air.html (version 14). Whenever I copied the SDK file extracted in my Flash CS6 file where default 3.2 and 3.4 software development kits. After that I open Flash, then help > manage Air SDK, click on '+', look for the new folder, and all I get is "the selected folder does not contain a valid AIR SDK" warning message. It looks the same with all four development kits software I downloaded!

  Not so long ago, I added AIR 4.0 without any problem. What I am doing wrong? Is the new SDK Flash CC alone or what?

  It should not matter what you name the file or where you put it as long as you are showing that directly the parent folder contains the software development kit. In other words when you go to the folder you're pointing to, you should see:

  

  If you do not see that you see a folder that contains, you were just pointing to the wrong file.

  With respect to the update of Flash Player, which is a process quite simple (but different). Hmm, I mentioned above in a different thread. Check the response post #9 and #12 for a brief overview on the update of Flash Player here:

  Create a worker in the flash IDE?

  Let me know if you have any questions. You should also consider the quick test running with the code that I mentioned it to ensure your AIR version and Flash debugger are what you expect.

• Flash Pro CS6 - language issue

  Hello, I'm Italian and I installed this software:

  Adobe Flash Pro CS6 Installer for Windows (German/Spanish/French/Italian/Dutch/Portuguese/Swedish)

  Download file size: 1266477072 bytes (1208 MB)

  MD5 checksum: 39DD95DE6E3B24847DB7BE3284ADCF91

  But after installation it shows me a text English and SWEDISH... why? I activated this sw with Italian license

  How can I change the language to English / Italian?

  You must uninstall the Swedish version and reinstall cs 6.  during the installation, select Italian or English.

• I could leave Media Composer of Avid to Adobe first Pro CS6.   Here are some of the questions: 1. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get the fo

  1-. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get phone assistance from Adobe?  3-. I would be able to create DVD or disc Blu Ray in stereo or surround sound?   4-.  I have a collection of software from NewBlue.  He will work with the Prime Minister?  Thanks for the info.  Bert

  1. I don't know, but go to first import Formats html 0 http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800

  2 - as far as I know, Adobe does not provide telephone support, only this forum

  3. you use the reminder grouped to create a DVD or BluRay http://forums.adobe.com/community/encore/content

  4 - If the plugin is specifically designed for PPro CS6, so ask the provider

• Flash Pro CS6 does not save files

  Hello, I have Flash Pro CS6 and started having problems with registration or

  overwrite the files locally and to a network drive.  I'm running a 64-bit machine

  Windows 7, it seems that Flash Professional is only 32-bit in this version.

  He is also 2 to 3 files sizes greater when recording.

  Flash Professional CS6 is available in 64-bit?  Who will help or should I

  to switch to animate CC?  OR is it a memory problem with my PC?

  Any help or feedback are appreciated!

  CS6 is just the latest 32-bit flash pro/animate pro.

  for your backup problem you can reset your preferences - http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

• Audio missing part of the element in Adobe Premiere Pro CS6, don't know what the problem is. Help?

  I use Adobe Premiere Pro CS6 on a MacBook Air. (I use an external hard drive for files and the project, don't worry). I'm editing an average movie film I already filmed and stored on my hard drive, however the audio is missing part of a clip when I open it in the program. When I play the original video in QuickTime format, the sound is fine. In Premiere Pro, the audio works at the beginning of the clip, then it just suddenly stops at a certain point and does not return. It stops at the same place everytime I play it. I tried to open Bars and tones, and I hear the tone very well. I tried to look at the audio mixer Panel, and nothing is cut or a smaller volume. I double checked to see if the clip is on and it is indeed turned on. As far as I know, there is no other clips blocking audio somehow. I tried to cut the video with the razor tool to see if he wanted to kickstart audio feedback, still nothing. I tried to change the name of the video. MTS of. AVI (tip, I found online), no change. I have really no idea what is the problem, or why the audio is missing. And I don't understand why it affects only part of the clip. The clip is around 10 - ish minutes and audio works for about the first ten seconds, then stops. He's a longer video which is about 20 minutes in the length, clip, that I'm getting is the last half of the video.

  If someone could help me with this, I would really appreciate it. It's for my graduation project and it is due in like a month, so I'm a bit required for the moment. If you have any other questions, please send them!

  I can't really give you a reason happens, but I can offer you some options to work around him.

  Open the item in Adobe Media Encoder and export it as a WAV file. See if the Audio is finished. If so, put that in first and make a subelement with the original video file.

  Again, NO idea why this might happen, but rather that why worry... Let's see if we can get your finished project.

  Good luck!

• Flash Pro CS6 Setup error

  I try to install Flash Pro CS6, but I get the following error (the message is in Portuguese) after running the .exe file (downloaded directly from the official Adobe Web site).

  I tried 3 different computers with Windows 8 and in a computer with Windows 7 and each of them giving me the same error. I use an Admin account so it is not the problem!

  

  You have any zip extraction tool, if so try opening the second file (.7z) file by using the extractor zip too (eg winrar), they are trying to Run Setup file.

• Flash Pro CS6, installation of Windows 7 64 bit PC installation hangs

  New download of Flash Pro CS6, initially tried to install on a PC running Windows 7 64 bit. Installation got stuck and does not respond to the step "Installation AdobeHelp" (about 30% in the installation.

  I then tried to install it on a PC running Windows XP 32-bit, and it's exactly the same thing.

  I am unable to go further - someone at - it advice?

  When your system crashes, open your task manager > process and close with adobe.  installation should go ahead.

• New to Adobe Premiere Pro CS6 and need help!

  I am new to Adobe Premiere Pro CS6, and I have two quick questions.

  1. Ctrl + K only works on 1 video, but not on the video 2, video 3, etc... Why?

  2. whenever I use Windows Live Movie Maker to convert video files, they import in the first half with superior video missing. I uninstalled security update kb2803821 and restarted my PC. It worked. But updates of Windows 7 all the time, so I will have this problem over and over again? And if so, how do I know what security update for every moment of the uninstall?
  

  I use the trial version of this software and want to know the answers to these questions before I committ and buy the complete thing. Thank you!
  

  1. Ctrl + K only works on 1 video, but not on the video 2, video 3, etc... Why?

  You must have the active runway.

  2. whenever I use Windows Live Movie Maker to convert video files, they import in the first half with superior video missing. I uninstalled kb2803821 security update and restarted my PC. It worked. But updates of Windows 7 all the time, so I will have this problem over and over again? And if so, how do I know what security update for every moment of the uninstall?

  Update status (messages 46 / 52):

  http://forums.Adobe.com/message/5555797#5555797

  In the meantime, I would disable the automatic updates of Windows.

• Develop apps for Android & iOS with Flash Pro CS6?

  I just want to begin creating apps and games for Android.

  1 is able to build an app or a game with Flash Pro CS6 and publish it on Android phone? also even with iOS?

  2. What is different in the developing applications with Flash Pro and Flash Builder?

  Thank you

  1 Yes and Yes.

  2 flash pro is more suited to the animators (and so game designers), while flash builder is more appropriate for developers (coders): http://forums.adobe.com/thread/791165

• Flash Pro CS6 native iOS Extension problem

  I'm looking for flash CS6 pro new features.

  The most important of them being ANEs [native extensions].

  in flash builder 4.6, when you use a DONKEY for ios, it is sometimes necessary to put the ios5 SDK location]-platformsdk  in ADT].
  This is completely missing in Flash Pro CS6 IDE, any way around that?
  [for the info on including the ios5 sdk check:

  http://help.Adobe.com/en_US/Flex/mobileapps/WSe4e4b720da9dedb5-4aefe03513238d8a1b8-8000.ht ml ]

  Thank you.

  
  
  
  

  OK it's resolved thanks to Colin Holgate of http://forums.adobe.com/message/4380821#4380821
  Apparently, when after adding a DONKEY for a TUNE for iOS project, you get a new option in the settings of the Air for iOS, where you can add the location of the iOS SDK.

  It's only for Mac I think.

• Adobe Flash Professional CS6

  Hello

  After having the Adobe Flash Professional CS6 intallation successfully when I try to open my file .fla it shows me following error "the application could not start correctly (0xc000007b). Click OK to close the application. And I am facing the problem of the number of days. Is anyone here who can solve my problem.

  With Windows errors like that is not usually nothing to do with the app showing the error. Look at the "best answer" on this page for some ideas:

  Error Windows 7 (64 bit) (0xc000007b) [solved] - games - Windows 7

  First one that I would try is to run as administrator.