Advanced conditional action does not work when I add the second condition

Similar Questions

• Tip action does not work when I add a second block of decision

  I'm writing an advanced action 8 Captivate. In response to a question about the points, the user types a number in a text entry area. When they support, the fast action will assess the number. If it is 10, the program should jump to a slide that shows that 10 is the right answer. (When I do just that in a single block of decision, it works.)

  However, the full tip action must assess if the value is higher or lower than 10, then return the user to the question slide and displays an appropriate message. When I add the part in a second decision block, advanced action performs as expected if an incorrect value is entered, but does not work if the correct value is entered. It does is display the question slide once again.

  Here is the code:

  

  Any ideas on what I am doing wrong? Should there be an ELSE statement in the first block of decision? I tried to continue, but that did not help.

  -Stuart

  The logic of your advanced action is not correct. All decisions are always evaluated. What is happening here is the following:

  1. First decision check if var is equal to 10; If this is the case, it will change to slide 2
  2. Second decision check if var is greater than 10, if it is accurate, it will move on to slide 1. I guess the capPoints1High is ON slide 1?
  3. BUT here's the logic bug: If If is not greater than 10, which is also the case when it is equal to 10, it will change to slide 1, although already, he jumped to slide 2 first with the first decisioin

  Two possible solutions:

  1. decision of the switch 1 and 2 (one easier)
  2. remove the ELSE part of decision 2 and create a decision 3 to check if var is less than 10

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  I have added a hyperlink which is a file video .mp4 but it does not work when I generate the document.

  Hello

  Do you use the WebHelp for the CHM converter script? If so, this screenshot may seem reasonable. If this is not the case, this isn't out CHM.

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• NotifyIcon() does not work when integrated into the application (.exe)

  Hey everybody,

  I use the NotifyIcon() of System.Windows.Forms.dll (.NET 2.0) to create a menu for the handling of an application. I started work with the example shown here http://zone.ni.com/devzone/cda/epd/p/id/3915and the code works when running in the IDE of LabVIEW.

  However, when I build the code in an executable file, the icon not during execution. Someone has an idea of what could be the problem?

  My code is still very messy (still in try-everything-and-see-what-works phase), so I will clean it before returning and detachment.

  For reference, I'm doing a system-tray only monitor for a NI DAQ 6009. Program begins in the system tray and begins to record data. The user can right click to display the main window where he can change the interval plots or update view.

  OK, I got it working!

  It turns out that I had a few errors:

  1. when I copied on the System.Windows.Forms.dll, I also need to copy System.Drawing.dll because I used during the creation of the icon.

  2. I had the .dll files in the build directory, but I forgot to include the icons used by the program.

  It turns out that the NotifyIcon() has been called, but a picture of the icon was never created! So why I couldn't see it...

• the volume button on my computer does not work, when I turn the sound upward just bar falls to zero, no idea?

  can someone me, help the sound icon on the bottom of my scree of the computer doesn't work, when I puch the bar until you get sound on my computer, it just goes back to zero all the time...

  Hi JacquelineStueck,
   
   
  Parameter by default on your computer would be to reduce the volume when inbound communications are detected.
   
  a. change the setting in your control-> Sound-> Communications tab panel ' doing nothing '.
   
  b. click on apply. Click OK.
   
  If this does not help, perform the clean boot in order to identify the request at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Additional reference on:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Trying to reinstall my Windows XP home edition and my keyboard does not work when I reached the part where I have to type my name and organization

  Original title: reinstalling Windows

  I am trying to reinstall my Windows XP home edition and when I reached the part where I have to watch myself and my organization my keyboard does not work and I can't type my name or to the next step.

  Hello

  1. did you have backed up your data before attempting to reinstall Windows?
  2. do you have other devices connected to your computer outside of the mouse and keyboard?

  If so, I suggest that you remove any external devices, then try reinstalling Windows.

• Problem: The button States works perfectly in preview mode; It does not work when published through the source of catalyst for business.

  I tried every way I know to create a button States in Adobe Muse CC 2015.  It works perfectly in preview mode, but it does not work effectively when published on a web site using the Business Catalyst (filename.businesscatalyst.com) process.  The problem, in my view, is that the text used in the button does not accept state changes.  I tried every workaround that I think might work, but nothing seems to work.  I even deleted the Business Catalyst site and then he came again, but it does not work.  Any information on how to fix this problem would be appreciated.

  I think I found my problem.  My original links have been on the "master" page  When I placed a link on a page of content object, Business Catalyst was able to translate the code correctly.  It is a disappointment because I need to duplicate objects on the pages, but at least it works.

• splash screen does not work when Self contains the .jar

  I use a function of the start screen for the appliction of javafx. I use the javafx ant task to run in the order, the fx:jar, the fx:signjar, the fx: deploy to produce the jar file, the jnlp, the HTML file and the nativeBundles including 'image' and 'exe '. The splash works well when they are packed in the .jar file by double-click.

  When I double-click on the exe file in the application image file or the shortcut after installation by running the installation .exe file, however, there is no splash screen. Why? The exe file does not have to based on the jar file? Thanks for help.

  The jar is produced by < fx:jar=""> . stand-alone file is produced by with inno installed on Win7. The generated jar has the start-up screen, double-click, but not .exe. Why? or something else has to do with the generation of a stand-alone application? I guessed that the .exe file runs based on the jar file it should have the boot too. Thanks for the reply ~ ~

• Global Script Protection activation does not work when you add '&amp; '.

  Hi all

  To prevent crosssite scripting attacks I ticked the checkbox 'Enable Global Script Protection' in the admin CF. But it doesn't work, I mean not able to prevent the attacks by scripts.

  I followed steps

  1] I run the below URL.

  https://xyz.ABC.com/index.cfm?cardholder_number= & < script > alert (1) < /script >

  [2] fornt ultimately I got a javascript alert message as injected into the URL.

  But this alert message should not be that I activated the script protection in CF Admin. law?

  Now, I have removed '&' (https://xyz.abc.com/index.cfm?cardholder_number= < script > alert (1) < /script >) since the above URL then I wasn't getting the javascript alert message. Does that mean that protection of script will not work if we add '&' to the URL?

  I searched the neo - security.xml and its looks like below.

  < var name = "CrossSiteScriptPatterns" > < struct type = 'coldfusion.server.ConfigMap' > < var name = '& lt; \s*(object|embed|script|applet|meta)' > < String > & lt; InvalidTag < / string > < / var > < /st ruct > < / var >

  Can someone help me solve this problem.

  Abdul L Koyappayil says:

  But even when a remnant of doubt why alert message is coming when there is '&' in the URL?

  This happens with "&" because it is a symbol special "Javascript" whose purpose is to delimit - i.e. separated - value of the URL query string key-value pairs. For example, in the URL www.myDomain.com/index.cfm?a=1&b=2, the '&' defines the query string in the key-value pairs 2

  a = 1

  b = 2

  Consider the case where the URL is www.myDomain.com/index.cfm?cardholder_number=& then . The & will delimit the query string in

  cardholder_number =

  The presence of '&' implies there are 2 variables. However, there is that a single sign "=", which means there is only a pair of key / value. In addition, cardholder_number is a name for a URL variable, while is not. The browser then sends the query string next to your application

  cardholder_number = EMPTY_STRING &

  However, Coldfusion's scriptprotect feature will intervene and this to neutralize

  cardholder_number = alert (1) EMPTY_STRING &

  that is harmless. These will come into Coldfusion variables URLS

  cardholder_number = EMPTY_STRING

  EMPTY_STRING = EMPTY_STRING

  The special nature of '&' as delimiter is what drives the browser to run the script. Indeed, by default, browsers will run any Javascript you place in the query string. Running, for example

  http://www.myDomain.com/index.cfm?

  But why tell I if they ask me why javascript alert then.

  As you have seen, the

  This isn't the case here.

• Flex app does not work when moved from the original location

  I'm doing a gallery of images in flex. It works when I run it in Flex Builder perfectly fine. Files html and swf works perfectly well open in any browser too, but ONLY when these files and all related files are open to the default location where the application has been generated in bin-debug folder. When I export a generation to another folder, the swf file loads but no other information from the display of the xml file. I tried to set all paths reference files (that is, the xml language) in the flex application to the absolute exact location on the server, and it did not work when I downloaded it on the server.

  I tried several approaches from scratch and they all arrive at the same question. I work with a teaching for Flex Builder License, I'm not sure if they jip you on those and ruin the compiled swf.

  Help, please! I'm losing my mind on that. I think it has to do with something else, in addition to the code because it works fine when I click 'Run', but if someone thinks it is helps for the zip code let me know.

  Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:

  Project - Properties - Flex Compiler - additional compiler arguments:

  Add - use-network = true, and then recompile and post back to the server, should work fine.

  Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.

  If this post answers your question or assistance, please mark it as such.

• Narrative does not work when you create the Windows Movie Maker project

  The narration does not work

  I made 2 projects of film making. Narating was good. Remove all the two projects. Photos as well. And began a 3rd movie, project. This time the narration does not work.

  I made 2 projects of film making. Narating was good. Remove all the two projects. Photos as well. And began a 3rd movie, project. This time the narration does not work.

  ======================================
  I was wondering... work your tape recorder of Windows?

  Windows Vista - sound recording
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  The following article might be worth a visit:

  How to: Add narration to a movie using Windows Movie Maker in Windows Vista. :-add-a-narration-to-a-movie-using-windows-movie-maker-in-windows-vista https://ask.qut.edu.au/app/answers/detail/a_id/4499/~/how-to.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Keyboard does not work when connected to the internet

  MY keyboard for some reason any works offline as if it was supposed to, but when online, he goes haywire, instead of typing the letters he hit numbers?  now, I have tried nothing troubleshooting the problem.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• Save to File.vi report does not work when integrated with the executable

  Hello

  When I use the NI_Report.lvclass:New Report.vi and NI_Report.lvclassave report to the File.vi, I can use successfully to create and excel spreadsheet so he was working at the developer.

  However when I build the source into an executable, this no longer works.  (The name of the file is built from the source, so I'm not using a dialog box)

  It can, however, create a .html file, but it does not seem as tidy.  Why is he not creating the Excel file?

  Running developer suite 2009, tried the .exe on Windows 7 and Windows XP with the same effect.

  Thank you

  -

  James

  See the attached zip file, it works for me here, see jpeg images and build the application accordingly and let us know. Did not include exe file, because the file size is too big.