Hide advanced action does not work after that triggered the effect

Similar Questions

• Keyboard does not. Able to use for the connection does not work after that.

  The keyboard works to connect. But does not work after that.

  Hello Sml15,

  The embedded screen keyboard should still work even if the physical keyboard isn't.

  Try this first...

  Press and hold the Windows key and the space bar.

  If no joy, go to the search bar and with the built-in keyboard, type the filter keys and choose key filter on or off.

  In the window of the ease of access to the keyboard, disable FilterKeys.

  If all goes well, which will fix the problem.

  Let me know how it turns out.

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Keyboard does not work after authentication on the RDS Session host

  When you connect to the RDS through the access portal or app keyboard does not work after authentication on the RDS session host. Offline authentication works very well, past will guide you to the RDS host, then when you try to reset your password, the keyboard does not work.

  Has anyone else had that... ?

  Options (some better than others!) are:

  1. move all MS applications seamless

  2. have an application named "Reset your password" (or similar) which uses MS Seamless.then you can leave other applications, as they are

  3 disable authentication carried forward and implemented our service reset password instead so people reset their password before can connect you.

  4. use the full desktop instead of transparent

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• On NEW laptop keyboard does not work after that the screen keyboard has been activated and then deactivated.

  Look at my friend got a new laptop and went through the whole upward. the on-screen keyboard has been activated which invalidates the real keyboard when the on-screen keyboard has been disabled the real keyboard has NO return. If this is a bug... Fix it. This is not a driver issue, it is not a user error. Stop giving people answers, trying to pretend like it's not not the OS when most people already know that it is.

  I'm sorry, but I didn't not new meant only one day.  And when I got my new laptop, one of the first things I did was to create a point of files, even a day later I had a restore to use - point and that was possible here as well.  I'm sorry it wasn't the case.

  If the system restore option is not available, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, you can try to go into the BIOS during the startup (the key appropriate to push appear on the screen to enter the boot menu or boot installation - try them both in turn if both appear. It is possible that the BIOS contains an option to disable the keyboard (which may have been activated by the keyboard on the screen but not changed when disable you the on-screen keyboard) and you may need to re-enable manually.  There is a slight possibility, but it is an option to try.

  Another option to try is to set up a new user account that has never used the keyboard on the screen and see if the regular keyboard works when you connect to this account.  If so, you can simply treat the original as a corrupt account account and use the following procedures to complete the transfer.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.

  I hope that one of these aid procedures.  I'm sorry if they seem to 'generic', but we do not really know what is the problem - especially since the system is new.  We try and identify the cause and fix the problem at the same time using the procedures available to us.  I suspect there's a registry tweak will correct this problem, but I went through the whole registry, and although I found several referencers keyboard, I could find no which seemed to control or not activate the main laptop keyboard (though it has been in one of the entries that has been encoded in binary that I couldn't read).  It's possible someone who knows more about the registry will respond to this issue with a proposal to amend (or perhaps another solution).

  I hope that one of the solutions I proposed works.  Please post back in all cases we will know whether or not to continue searching for an answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photosmart C6380 all-in-one: HP Solution Center does not work after update to the last version of Windows 10

  Printer worked flawlessly after upgrade to Windows 10. But with the last update, I can't scan more by HP Solution Center. I tried HP doctor and then remove and reinstall the software suite full, ensuring I have the latest drivers, but it still does not work. HP Solution Center is installed on my pc, I can even click on it and then it opens (briefly) and then closes, there is no way I can use the features. [However, doctor of HP, I could do an analysis of test and that worked, so there is nothing wrong with it.] Help...

  Hello

  Microsoft has since released a new update for this problem.

  Fix solution:

  Please download and install the following update KB3133431 from Microsoft:

  https://support.Microsoft.com/en-us/KB/3133431

  Note This update is available through Windows Update only. (Updates )  must be lit)

  1. Click the Start button, select 'Settings' and select 'Making day & security'
  2. Under "Windows Update", select "Advanced Options".
  3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• HP Notebook: Wifi and Audio does not work after update of the 10 victory

  I updated the OS to win 8.1 to 10 and it was somthly, but after this recent update to win 10 all at once the wifi has ceased to recognize all the networks around it... also the audio has stopped working. I tried the two troubleshooting and found the audio starts to work after you troubleshoot but wifi does not work. This happens everytime I turn on my laptop, and whenever I have to solve an audio driver to fix it but the wifi doesn't work every time... Please help... I also tried to update the drivers of these two, but he said that the drivers are updated every time... Please let me know if anyone can guide me through this problem...

  Hey @Riken_HP,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with the wifi on your HP laptop. I'd be happy to help you.

  What is the exact model of your laptop? If you do not know who will find it here: http://support.hp.com/us-en/drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting wireless network and Internet (Windows 10)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows 10)
  Forget wireless network profiles in Windows 10

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.

• Laptop does not work after you remove the virus win32/winfixer

  Original title: win32/winfixer

  I had cleaned up my n cell phone it's a bad virus win32/winfixer and now my laptop does not work because I deleted it and also my big computer will not work right there problem downloading it says it needs to microsoft.net1.1sp1 ep, but it does not load become crazy pls help me...

  Hello

  1. what exactly happens when you start on the desktop?

  2. you get any error message?

  3. is your laptop work fine in safe mode?

  4. What are you trying to download?

  5. How are you trying to download?

  6. What is the full error message do you get?

  7. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• TouchEvent in Listfield does not work after scrolling in the storm.

  Hello

  My problem is that I have a 250 size listfield, which I add to a verticalfieldmanager1, this verticalfieldmanager1 is added to an another verticalfieldmanager2, then verticalfieldmanager2 is added to horizontalfieldmanager then horizontalfieldmanager is added to the screen.

  By default, I have to display index 220 (to achieve this, I'll focus on the listfield), so when I key to select other items in the list it is not selecting (Touch event does not work). It is to select only the element that has focus.

  I am owner event touch listfield. Could someone please help me in this regard.

  Hello

  I am happy to share that I found a solution for the problem I had.

  Post here as it may help someone. I used the TouchEvent.getX () & TouchEvent.getY)

  directly which solved my problem, previously I was using () TouchEvent.getGlobalX & TouchEvent.getGlobalY ().

  Once again thank you.

• HDMI port does not work after you refresh the computer.

  Updated my computer and now my HDMI port does not work. I can not connect my labtop to TV.

  Are you sure that the additional monitor is turned on.  Try holding down the and then press P until it is selected to extend the screens.

  If this does not work, go to your computer manufacturer's website and download and install the latest version of your graphics drivers.

• tablets and the location of phone does not work after update of the muse

  After the update to the new version of Muse and upload the site converts the tablets and version phone does not work as before.

  So I have to restore from a backup site

  Have you seen the list of known issues in the troubleshooting with Adobe Muse 2015.2 questions ?