Advanced property editor

Similar Questions

• Window Media Player 11 - prompt for information already filled in under "Advance Tag Editor" does not appear

  Earlier when using "Advance Tag Editor" in Window Media Player 11, singer and other information earlier filled by me, names appeared automatically by typing just a letter of the word. For eaxample so I had previously filled Mohd. Rafi 'Artist Info' and if I needed to write again Mohd. Rafi for the song under this column, just by typing M, name and surname as Mohd. Rafi used underneath and just by clicking on it, it is used to get automatically filled in the column. Now, he can't like that. I write full name every time. Please guide me as to what I should do. According to me, a box has been "unmarked" by me in error as this prompt for more information, already filled, is no longer available.

  Hello

  You did material recent or changes to software on your computer before this problem?

  Step 1: If the problem started recently, then you try to run the system restore.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  Step 2: You can try to install the updates and check.
  Reference: http://support.microsoft.com/kb/278960/en-us

  May you enjoy a look at the below articles.
  Find items in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-items-in-the-Windows-Media-Player-library

  Add or edit media information in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-edit-media-information-in-Windows-Media-Player

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Media player 11, advanced tag editor, problem

  When I try to change the info on some of my music I can't do. I looked at the Help menu, but that did not help. The problem is, I was able to access advanced tag editor to change before but now I can't any more, and none of my MP3s are in read-only mode. When I right click, advanced tag editor is not listed. Can I edit my other two playlist but not the third. I downloaded a plug-in before for the words, but simply to delete. Help, please

  Jonathan Quest

  But this context menu does not include the tag editor for a few songs?

  Check that these songs really are in MP3 format: right click, select the location of the file opened , right click on the music file in Explorer, select Properties and note the type of file field.

  Are you sure that these songs are in the section music library and not another section such as video or other media ?

  Try to add the songs assigned to the library, maybe this will help. Right click the songs in the library, select delete - delete from library only and click OK . Then, press F3, make sure that the Advanced Options are displayed and that Add files previously deleted from the library is checked and click OK .

  Tim Baets
  http://www.BM-productions.TK

• What happened to Advanced Tag Editor?

  What happened to Advanced Tag Editor?

  Advanced Tag Editor is not included in this version of Windows Media Player. But by editing media information in the Details pane of the Player library, you can still do most of the tasks that you performed with Advanced Tag Editor.

  For more information about editing media information, see Add or change information media in Windows Media Player. For more information about the Player library, see getting started with Windows Media Player.

  (http://windows.microsoft.com/en-us/windows7/Add-or-edit-media-information-in-Windows-Media-Player)

  (http://windows.microsoft.com/en-us/windows7/Getting-started-with-Windows-Media-Player)

• OMP 12 advanced tag editor

  I have a new PC with Windows 7 and I have WMP 12, I would like to add the words, but I don't see how it's done, the advance tag editor is NOT in this version, go to the Explorer > file > properties > advance it does not enable the ad words.
  If there is a way to add lyrics (no downgrade to version 11) I would like to know it.
  MEask

  You must do it from windows Explorer.

  > Right click on the file
  > Properties
  > Summary
  > Advanced
  > then you can add the words within the field of words

  Advanced Tag Editor is not included in this version of Windows Media Player. But by editing media information in the Details pane of the Player library, you can still do most of the tasks that you performed with Advanced Tag Editor.

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-Player

• Is there an "Advanced Tag Editor" in Windows Media Player v12?

  Allowing only updates when the album is found in the fai.music.metaservices.microsoft.com database? I used to be able to use this feature in earlier versions of Windows Media Player.

  Dude,

  Advanced Tag Editor is not included in this version of Windows Media Player. But by editing media information in the Details pane of the Player library, you can still do most of the tasks that you performed with Advanced Tag Editor.

  For more information about editing media information, see Add or change information media in Windows Media Player. For more information about the Player library, seegetting started with Windows Media Player.

  (http://windows.microsoft.com/en-us/windows7/Add-or-edit-media-information-in-Windows-Media-Player)

  (http://windows.microsoft.com/en-us/windows7/Getting-started-with-Windows-Media-Player)

• No found Exception - JSF 1.2 property editor

  Hi I'm migarating request weblogic 9.2 to weblogic 10.3. I use tomhawk jsf library 1.10.While migarting I get an error message
  I checked all the compatibility... .servelet 2.5. I also kept valid webxml to servlet 2.5 etc.. But still, I get the same error.
  
  Please help me,
  
  No property found to bean «javax.el.ValueExpression» Editor
  < f: selectItems value = "#{dataAdmin.dataAdminVO.tablesList}" renderings = "#{! empty dataAdmin.dataAdminVO.tablesList}"/ >}
  ^------------------------------------------^
  
  at weblogic.servlet.jsp.JavelinxJSPStub.compilePage (avelinxJSPStub.java:328 (J)
  at weblogic.servlet.jsp.JspStub.prepareServlet (JspStu b.java:237)
  at weblogic.servlet.jsp.JspStub.prepareServlet (JspStu b.java:182)
  at weblogic.servlet.internal.ServletStubImpl.execute (ServletStubImpl.java:235)

  Cross posted
  http://www.Java-forums.org/JavaServer-Pages-JSP-JSTL/34927-no-property-editor-found-exception-JSF-1-2-a.html

  No more?

  DB

• property editor - apply a so-called invariant culture

  Hello

  I have a property with the following configuration editor:

  object: scatterplot

  property name: PointSize

  The problem is that its representation depends on the locale, for example:

  Spanish is: "5; 5"

  United States of America is: '5, 5'.

  So how do the invariant culture to represent always the same way?

  Hello

  Write this piece of code at the beginning of your code.

  Thread.CurrentThread.CurrentCulture = new CultureInfo ("", false);

  This will make the locale to be set to read-only. But this causes culture to be invariant in the thread.

  I hope this helps.

  Habim stone

  National Instruments

• Advanced Tag Editor WMP 11 does not apply zero on track numbers 1-9

  Try to change the info tag track number for tracks 1-9 on my albums so the pieces will be in good condition on my phone, but a leading zero significant is not preserved when I clicked OK.  While my previous phone (LG VX8300) apparently looked at the names of files (which have the zeros) to maintain order, my current phone (LG env3) seems to use the info tag, so for every album all numbered titles 10 and above (but I guess that less than 20, if there were those who raised) appear between tracks 1 and 2.

  This is normal.
  You can leave your comments on the following link: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  Edit: As a work around, you can use a numbering system used with for multi-disc albums, disc number and track number (mainly precede 1): 101, 102,..., 112, etc..

• Album Art is applied to mulitible albums in the MP library when you use advance tag editior

  Receive apply photos to an album that has no album art using the advanced tag editor image is applied my whole library.  sometimes as long as 20 other albums.  How can I fix it?

  Hi dmcd53

  Thank you for using the Microsoft Answers Forums!

  If you have the files in the correct folders, and they are displayed incorrectly in the media library (with the exception of the album art), one of the things you can do with WMP 11 is to find the album cover and stick it in WMP 11 library on the location of album art.

  Once you have done this, it will actually integrate art into the header of the music file and write to the location of the folder where the files are located.

  You can also try this step:

  Make sure that the tracks are organized in library support-> artist-> Album folder hierarchy - in other words, the example, has tracks in a folder under the folder named securities A and B in a folder under the folder named B and so on.

  Then, navigate to A tracks in the Media Player and select all in the library. Make a right-click any selected song and select advanced tag editor. Now, make sure that the album name and album of the artist is correct for all these tracks. Click OK.

  Now, navigate to B tracks in the Media Player and do the same thing with regard to advanced tag editor. And so on for all your folders.

  Now, close Windows Media Player. Then you can put your own album art, in each
  album folder, naming the appropriate image to Folder.jpg. Right-click on
  Folder.jpg and select Properties. Check the read-only box. Click OK.

  Or you can let Windows Media Player to find and provide its own pouch of pixel.

  If this does not resolve the problem and if your titles are MP3, (and they should be - you should avoid tearing in WMA in most cases), you can delete all images PRIV ID3V2.3 tag on each track and start again. Or remove the PRIV frames before you try the first time.

  Also check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-change-album-art-in-Windows-Media-Player

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Page Designer - pane property does not

  APEX 5.0.1

  Just started noticing a strange problem with the page designer. The right pane (properties of the selected component) becomes simply does not. I cannot click in all areas, can not make changes, cannot even use the scroll bar! Now if I click on an element in one of the 2 other components (component of the tree in the left pane, or the Center) to highlight an item, this restores the focus to the right hane pane and makes sensitive again. I make a few changes and switch to another application window or a new tab in the same browser, no matter what. When I go back to the tab of the browser Page Designer, I find that the right pane does not again! You will need to click on the current item in the left pane or the Centre for the development of restoration.

  The kicker is that this seems to be a problem of IE 11, everything works fine in Firefox 39.

  I'm sure that I have encountered this problem before in all versions of APEX EA 3. Unfortunately, I am not able to reproduce this in apex.oracle.com in IE so there seems to be something specific to my browser/environment :-(but I can't imagine what it would be if Firefox works fine.

  Any ideas?

  Thank you

  I tried to reproduce this "refractory" condition I can't say for sure, but I think I found the same thing you describe. If I click on the scroll bar of the editor property that emphasis remains stuck on the whole property editor div and I can click on all the fields that it contains. I have not found another way to enter this State does not.

  This means you cannot use the scroll bar to scroll the property editor. You must use the tab or the mouse wheel. Alternatively, you can get out of this State by using the tab key.

  If you know another way to get into this State, let me know.

  I will enter a bug.

  Kind regards

  -John

• How to set icon CSS classes

  Hello

  in my application, I would like to display our company logo (downloaded it s as a static application file) on the login page (with patterns of connection, as well for the region and the page). The logo must be placed above the header "Login" (as in the database).

  To do this I have to define an icon class CSS, right? How and where can I do this?

  Thank you in advance!

  LMK

  2997263 wrote:

  Thanks for your reply. I m using APEX 5.0 and the universal theme.

  1. turn your class icon in the Icon of CSS Classes in the appearance section of the region connection properties in the property editor.

  2. Add the following style sheet to connect Inline CSS property page in the property editor:

  .your-icon-class {
    background-image: url(&APP_IMAGES.your-image-filename);
    background-repeat: no-repeat;
  }
  

  Replace the class name and image filename as needed.

• question about SQL and VMDK places

  Hello world. Im kinda new here so please be gentle

  I'm confused on the locations of the files for sql.

  At this moment I have 1 with 3 vmdk files sql server executes a muscular 100 GB sql database.

  My disks are as follows

  1 OPERATING SYSTEM

  2 DB

  3 newspapers

  They are all thick and they are all stored with the virtual machine in the virtual machine configuration.

  It lies in a cluster HA/DRS and we use them both.

  The question boils down to performance.

  If my VM is stored on DATASTORE_A and the VM folder on this data store has all the VMDK files in it, it would be safe to say that they are all on the same disk as much as vsphere is concerned.

  Now to get best performance, I want to separate my VMDK files to separate data (with faster operation) warehouses to avoid conflicts of drive on my current data store. What is the right way to go about this?

  How separate you your VMDK to other data warehouses, and enjoy other performance data store? WE do not use DTS at all so im sure it although we use HA/DRS in our group... and yet, I don't think that it is important in this case... just more of an FYI.

  What do you do to get your SQL servers to run in vmware?

  Seems like a basic question.

  The answer seems easy. Separate disks so that they do not fight.

  'S virtually done it with VMDK but the data store underlying is 1 speed and they all exist on this subject, so... How to separate them at that level for best performance?

  Also... once I keep them separated, how can I keep my sanity by knowing my VMDK are not with the virtual machine? This kind of made a mess . Of course the performance takes a front seat for my mental health.

  Thank you all

  1. If I sVmotion my other vmdk files via the advanced options of one in another data store, it will create the files folder structure based on my VM name and place the vmdk inside?  (I guess I could just test it and see).

  Yes, the VM configuration file (.) VMX) will be modified to point to the new location of the virtual disk. You can use the virtual machine property editor to check for this, once the Storage vMotion.

  2. with regard to the disk controller, I assume you mean a virtual controller by VMDK in the vmx / correct the settings of the virtual machine and not a phyical on the hardware controller? (IM pretty sure I know the answer here but I just want to be clear).

  Yes, the virtual controller is correct.

  If so, what type of controller? LSI Logic or it would benefit all a paravirtual adapter?

  As long as your operating system is supported, go with the PVSCSI every time - especially for newspapers and the controller file data.

• Web Analytics: error when exporting to Excel!

  Hello
  
  If I try to export a report in WA to Excel, the following error occurred:
  
  "HTMLViewer < Server > can not be downloaded...". "(error message is originally in German).
  
  Someone at - it an idea how to solve this problem?
  
  Thanks in advance!
  Stefan

  Hello Stefan,

  If you are just using SSL and IE 7 there are two possible solutions/solutions to your problem.

  1. install WA SF 11.1.1.3.25 9672346 Patch: Oracle Hyperion Reporting and analysis 11.1.1.3.25 challenge for Web Analytics Service (if you have 11.1.1.3 version)

  or
  2 intended use of circumvention

  1. disable IE Advanced property 'do not save pages encrypted on the disk.

  2 read the article: http://support.microsoft.com/kb/323308 and follow these steps:

  a. start Registry Editor.
  b. for a per-user setting, look for the following registry key:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
  For adjustment by computer, look for the following registry key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet settings
  c. to replace the directive for HTTPS connections, add the following registry value: "BypassSSLNoCacheCheck" = DWORD: 00000001
  d. close the registry editor.

  NOTE: it would be possible that another key needs to be added:
  "SSLPragmaNoCache" = DWORD: 00000001, it depends on the IE version and is explained in the article.

• How can I associate social media and their icons in my signature?

  Can you help me please? I can't find out how to add social media and their images in my email signature. I do not know the code, so if that's what I have to do, send me a process step by step on how to do it. It would be much easier if I could have called for help instead of having to go through a complicated website and system just posted a question which may take long to get a response.

  You dial you signature in an HTML document. You can do it in Thunderbird, just as you could write an e-mail message.

  You can insert images inside, and you can attach to these images (via their property editors), links to social media sites.

  Finally, you save your signature as an HTML file, and then set to use as your signature.

  https://support.Mozilla.org/en-us/KB/signatures
  http://en.flossmanuals.NET/Thunderbird/ch018_composing-messages/
  http://KB.mozillazine.org/Signatures_%28Thunderbird%29