Similar Questions

• How the message of Confirmation of the display when the data is stored in the DB?

  Hello.
  
  I'm persistence data entered by the user to the database table. But I want to display a custom as "Stored successfully" or "Unregistered" message
  
  I use same optics in my controller and AM impl
  
  of the PFR:
  ----------
  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processFormRequest (pageContext, webBean);
  
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  
  am.invokeMethod ("insertDataToDeviceDetailsTable");
  
  
  }
  
  
  am Impl:
  ------------------
  
  public void insertDataToDeviceDetailsTable() {}
  
  getDBTransaction () .commit ();
  
  delegation of control to the details Page of the device
  
  
  
  }
  
  
  How to do? and also what is the best way to show messages in this scenario. As in some pages, a dialog box appears and the page become inactive.
  
  waiting for response...
  
  
  
  Kind regards
  Ajay

  Hello

  You can message pint after the am.invoke method:

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  am.invokeMethod ("insertDataToDeviceDetailsTable");
  throw new OAException ("successfully stored", OAException.INFORMATION);
  }

  am Impl:
  --------------------------------------------------------------------------------
  public void insertDataToDeviceDetailsTable() {}
  getDBTransaction () .commit ();
  }

  Sushant-

• Check invalid date and display error message for that forms 10 g or 12 c

  Hi all

  a text element text_fdate is of data type date mask and the format is dd/mm/rrrr

  In this text element that I want to display validation message "you have entered an incorrect date that does not exist.

  When the user enters an invalid date as 30/02/2016 which is not exists.

  What trigger I use and when.

  Florian wrote:

  Hey Hamid,

  GET_ITEM_PROPERTY ('ITEM_NAME', ITEM_IS_VALID);<--it is="" not="">

  Above will work only on the query mode.

  The code works, but the below error code you gave does not work in forms 12 c.

  1. IF ERROR_CODE = 50012 THEN
  2. MESSAGE ("Please enter the correct date.");
  3. MESSAGE ("Please enter the correct date.");
  4. END IF;

  The correct error code is 50004 12 c forms.

  Just change the ERROR_CODE of 50012 to 50004 and it will work.

  I'll check the error code in form 10g and will play with you again.

  I already checked and functional at 10g.

  Hamid

• Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

  original title: error 0xC0AA02FF

  I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

  "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

  Hello

  What method did you follow to create the system repair disc?

  I suggest you to create the system with different USB repair disc and check if it helps.

  Means all try the methods and check them off below if it helps.

  Method 1:

  Try to put the computer in a clean boot state, and then check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose a small amount of data while performing the check disk.

  I also inform you that the data on the USB key will be lost. You should take a backup.

  You can also check with the reference article below:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

• Display an empty table row of data when the data is not present

  Hello

  Can u please tell me How to display a row of data empty table when the data is not present?

  in my case the column header appears as the code below.

  <? If: SD_Type_Data_ID3 = 'KH '? > <? If: SD_SpecialHandlingCode_SPHD_ID17 = 'H '? > <? for each: Supplemental_Data_S17? > <? end if? >

  can u pls help me.

  Thanks and greetings

  Sylvie Kumar

  You can insert a fictitious line. Have an if condition in it, to show only when condition does not satisfy.

• BlackBerry Smartphones most recent message is displayed when you open the message icon

  I'm trying to find a way to get the most recent message displayed when I open the default message icon.  Is there a way?

  I know that if I discover a message and then exit the application message that when I go back to the messages that the last of them, I've seen is one that is display everything first.

  Thank you.

  Hi and welcome to the forums!

  I noticed as well, that is not an option for him.

  If you notice when you go into a folder, then exit and return, the display

  isn't that exactly where you left it. The display does not start at the top of the file.

  Same thing with the messages.

  This causes many people to swear that they lack icons and new messages.

  I just read the message and give a quick blow to the current date.

  In this way, it is at the top of the queue when I get back.

  I don't think even on this, no more, just reflex.

  Thank you

  Bifocals

• BI Layout Editor - how to display the current date?

  Hello

  Recently used BI Layout Editor (previously using MS Word to create the presentation of the State).

  He seems really nice and easy to use.

  However quick Q - How to display the current date in the layout editor (to show the report run date).

  Any quick suggestions is appreciated.

  Thank you

  Vivek

  Tab displays your selection available.

  It's like how when you insert the table in the Word document and when you select the table, you would see 2 additional tabs such as the design and the tool.

  Can you please insert "Text Element" and select the text element and see if you go to the tab 'text '?

• JavaScript to display the field date in the format below

  I'm a customer form who need the date to display in the format below

  As if he puts day 13/05/2015 then it should show that may 13, 2016 (Please note that there should be "th" after 13)

  19/07/2016 should show that July 19, 2016 (an' th' after only 19 should be here)

  Thanking you

  This way of listing of numbers is known as "Ordinal". There are many was to this script. What works for the web that JavaScript can easily work with few changes in Acrobat Forms. This type of date format is generally used in legal forms.

  You should be able to search the forums for "legal date" or "ordinal" and find the post.

  I found a JavaScript function that can take a number of entry and returns the number with the ordinal suffix. This allows you to create any number of date formats.

  This function is not limited to a few dates bat can be used to add the ordinal suffix to a number any.

  The function:

  function ordinal_suffix_of (I) I have

  {

  var j = i % 10, / / tens of rest

  k = i % 100, //100's remains

  cSuffix = "e"; results of default suffix

  If (j == 1 & k! = 11) {}

  No 11;

  cSuffix = "m";

  }

  If (j == 2 & k! = 12) {}

  No 12;

  cSuffix = "nd";

  }

  If (j == 3 & k! = 13) {}

  No 13;

  cSuffix = "rd";

  }

  return i + cSuffix;

  } / / end of function ordial_suffix;

  I put this code in the location of the script to document level and then call it as necessary in the various areas.

  I enter the date in a different area that would not print and then have the date formatting in another area. You know how to divide the date entered in the month, string date and year, parts and then rearrange them as needed.

  You can test the code using the Acrobat JavaScript console:

  function ordinal_suffix_of (i)
  {
  var j = i % 10, / / tens of rest
  k = i % 100, //100's remains
  cSuffix = "e"; results of default suffix
  If (j == 1 & k! = 11) {}
  No 11;
  cSuffix = "m";
  }
  If (j == 2 & k! = 12) {}
  No 12;
  cSuffix = "nd";
  }
  If (j == 3 & k! = 13) {}
  No 13;
  cSuffix = "rd";
  }
  return i + cSuffix;
  } / / end of function ordial_suffix;

  function MyDateFormat (cFormat, cDate)
  {
  Kai var = util.scand (cFormat, cDate);
  if(oDate == null)
  {app.alert ("invalid date provided", 1, 0);}
  }
  on the other
  {
  "Return util.printd ("mmmm", letter) +" "+ ordinal_suffix_of (oDate.getDate ()) + ', ' + util.printd ("yyyy", anyway);"
  }
  }

  var dateInput = "13/05/2015; value of date entered;
  var cFormattedDate = MyDateFormat ("d/mm/yyyy", dateInput); formatted string for the date;
  Console.println (cFormattedDate);
  dateInput = ' 23/05/2015;
  Console.println (MyDateFormat ("d/mm/yyyy", dateInput));
  dateInput = "19/07/2015;
  Console.println (MyDateFormat ("d/mm/yyyy", dateInput));
  dateInput = "09/07/2015;
  Console.println (MyDateFormat ("d/mm/yyyy", dateInput));

• QlikView Thinapp start Office installation / repair of routine when sending data to Excel

  Hello

  I have a Thinapp of Qlikview 11/11.2 built with VMware Thinapp 4.7 race. The ThinApp is the installation of MS Office / repair of routine when sending data to Excel via the option "sent to Excel".

  Excel is started, the data sent are displayed, but after a few seconds the installation / repair turns on.

  When the Setup routine asks you to restart the license error message is also coming:

  "Microsoft Office is unable to verify the license for this application. An attempt of repair failed or was canceled by the user. The application will now be stopped. »

  [Compiler options]

  AllowExternalKernelModeServices = 1

  AllowExternalProcessModifications = 1

  VirtualizeExternalOutOfProcessCOM = 0

  Native MS Office installation is permitted via KMS and there is no defective behavior when Excel is started directly or through associated files.

  My goal now is to avoid the opening of installation / repair of routine and the license error.

  Any help is appreciated!

  Get rid of the changes to the package.inj you have already done and add them instead:

  In package.ini:

  VirtualizeExternalOutOfProcessCOM = 0

  ChildProcessEnvironmentExceptions = WINWORD. EXE; EXCEL. EXE; POWERPNT. EXE, OUTLOOK. EXE; MOC. EXE

  ChildProcessEnvironmentDefault = virtual

  This will make sure excel is not running in the virtual environment of your parcel.

• Forms 10g + UTF8 - Item displays # when he's happy is too long

  Hello

  I am facing a strange behavior with Forms 10 g and NLS_LANG = UTF8.

  DB 11G withcharset in AL32UTF8 on Linux

  Forms 10G on Linux

  We are currently upgrading our DB 10 G DB 11 G + UTF8 form.

  After adaptation data DB 10G and 11G, we changed sementics BYTE in CHAR columns in DB 11 G.

  Migration worked well.

  Now we try to connect to our application in the form of 10G to the new DB 11 G + UTF8.

  First we were faced with the error ORA-01461 "can bind a long value only for insert in a long column".

  To resolve this error, we have clarified the NLS_LANG = american_america.utf8 in default.env.

  This problem is solved now.

  We have specified the following parameters when compiling:

  NLS_LANG = AMERICAN_AMERICA. UTF8

  Export NLS_LANG

  NLS_LENGTH_SEMANTICS = CHAR

  Export NLS_LENGTH_SEMANTICS

  The application works fine except a few ITEMs that display # when their content is too long.

  For example with a Varchar2 ELEMENT (5) length_semantics = NULL (if the compiler uses the NLS_LENGTH_SEMANTICS specified during compilation).

  -When I fill it with "xxxxx" it works very well.

  -When I fill it with "xxxxe", it displays "#". The ELEMENT behaves as in Excel when the cell data cannot be displayed as a whole.

  Any idea on how I can avoid this behavior?

  Thanks in advance.

  Tim.

  There is a bug in forms 10.1.2.3 for when the length of an element in BYTES is greater than the length of the CHAR data # are displayed.

  =>

  Length ('xxxxx') = lengthb ('xxxxx')

  but

  Length ('xxxxa')<>

  so you will get #.

  There is a single patch for this what number I do not remember. The patch is packaged in the latest available patch for forms #9593176 and #13095466 which will also give you the benefits of being able to run your forms 10 g with Java7 (even if she is not certified).

  see you soon

• From a function table: invalid data type error

  Hello
  
  I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.
  

  create or replace package pkg10
  as
  
  type tabletype1 is table of table1%rowtype
  index by binary_integer;
  
  function func1 return tabletype1;
  
  end pkg10;

  create or replace package body pkg10
  as
  
  function func1 return tabletype1 
  is
      v_tab1 tabletype1;
      idx integer;
  begin 
  
      idx := 1;
      
      for i in (select * from table1)
      loop
          v_tab1(idx).name1 := i.name1;
          v_tab1(idx).key := i.key;
          idx := idx+1;
          
      end loop;
  
  return v_tab1; 
  
  end func1; 
  
  end pkg10;

  select * from table(pkg10.func1);

  Please point out to me where I'm wrong.
  
  Thank you

  Sathya Vamsi says:
  Hello

  I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.

  create or replace package pkg10
  as
  
  type tabletype1 is table of table1%rowtype
  index by binary_integer;
  
  function func1 return tabletype1;
  
  end pkg10;
  

  create or replace package body pkg10
  as
  
  function func1 return tabletype1
  is
  v_tab1 tabletype1;
  idx integer;
  begin 
  
  idx := 1;
  
  for i in (select * from table1)
  loop
  v_tab1(idx).name1 := i.name1;
  v_tab1(idx).key := i.key;
  idx := idx+1;
  
  end loop;
  
  return v_tab1; 
  
  end func1; 
  
  end pkg10;
  

  select * from table(pkg10.func1);
  

  Please point out to me where I'm wrong.

  Thank you

  you try to use a data type of PL/SQL as part of an SQL statement. is NOT authorized.

• Invalid data store

  I get invalid data store during an attempt to do a restore. This is a new configuration, and it is the first attempt to restore.

  The backup destination is a shared folder on a Windows Server, apparently the backups run properly every night (at least for the last week).

  The device mapped / shared is 800 GB, is that a problem?

  So far, there are only about 60 GB of data written to the location, and I can continue to make backups.

  By default, there are no data store selected, if you had to choose a menu drop-down. Maybe you where missing this step when restoring, and it is the reson for your error message.

• I get an error-invalid data type

  DECLARE
  CURSOR med_rec_cur
  IS
  SELECT *.
  OF temp_records_med;
  
  p_success NUMBER;
  strQuery VARCHAR2 (10000);
  v_count NUMBER;
  v_filename temp_records_med.filename%TYPE;
  
  TYPE med_rec_tab IS TABLE OF temp_records_med % ROWTYPE;
  
  ErrNum NUMBER;
  
  Slno_tab TYPE IS a TABLE OF VARCHAR2 (100);
  
  v_med_rec_tab med_rec_tab;
  dml_errors EXCEPTION;
  v_slno NUMBER;
  v_all_slno VARCHAR2 (1000);
  v_slno_tab slno_tab;
  tba_slno temp_records_med.slno%type;
  
  BEGIN
  OPEN med_rec_cur.
  
  LOOP
  BEGIN
  EXTRACTION med_rec_cur
  LOOSE COLLECTION v_med_rec_tab LIMIT 1000;
  
  FORALL I IN 1... v_med_rec_tab. COUNT SAVE EXCEPTIONS
  INSERT INTO meddetail
  VALUES v_med_rec_tab (i)
  RETURN slno BULK COLLECT INTO v_slno_tab;
  
  EXCEPTION
  WHEN dml_errors
  THEN
  v_all_slno: = ', '. To_char (v_all_slno);
  END;
  
  EXIT WHEN med_rec_cur % NOTFOUND;
  END LOOP;
  
  CLOSE Med_rec_cur;
  
  INSERT INTO BOSSDRAGON - INVALID DATA TYPE
  SELECT * FROM TEMP_RECORDS_MED WHERE SLNO NOT IN (SELECT tba_slno FROM)
  (TABLE (CAST (v_slno_tab AS slno_tab) tba_slno))) ;
  
  END;
  
  Published by: user8731258 on Sep 6, 2010 23:14

  Casting will not change the fact that you have a local collection type in a SQL statement, which is not allowed. You can create a stand-alone type with CREATE TYPE? Or use something like SYS. DBMS_DEBUG_VC2COLL that is already defined.

  You don't need a CAST explicitly in the TABLE expressions after around Oracle 8i.

• Alternatives to the dynamic tables for the display of dynamic data

  What methods are available for the display of the data to MySQL with PHP on a web page? Is there an alternative to a dynamic table when him varies the amount of data? whatever it is the basis of CSS?
  
  Thank you very much

  May 27, 2006 to macromedia.dreamweaver, mother of Pingus wrote:

  > if I could just output a div for example?

  Or a paragraph, or a

  , an unordered list, or any other container
  Tag, or the attribute src on a tag, or a combination any of the
  above. Consider the case where the database includes press releases-
  date, title, body. You might, say, do the repeat as this region:

  Press releases

  
  
  

  <& headlinefromdatabase="" &="">

  
  

  <& datefromdatabase="" &="">-<& bodyfromdatabase="" &="">

  
  
  

  Contact Information

  --
  Joe Makowiec
  http://Makowiec.NET/
  E-mail: http://makowiec.net/email.php

• Display of form data &amp; amp; emailing even

  Environment: DW on Win 32 machine, php, mySql, remote Mac OS x Server.
  
  I have some fairly complex forms that accept text and the blob of data from users. When they "support" data, it must be validated in the database AND some of them sent to the user as well.
  
  Calls for action form a 'Thank You' page' that should actually do the work.
  
  Currently, I can:
  (a) correctly display data from the database and the thank you page appears correctly. (but without sending the e-mail)
  OR
  (b) by e-mail of the user and view the thank you page. (but without display of the data in the database)
  
  When I combine two php scripts into one on the thank-you page, I can publish the data from the database, but the email fails.
  My question is: is it possible to do both on the same page, thank you, and if so, what could I do it wrong?
  
  My server relays mail out to my ISP SMTP requires authentication, but I have that works well when I use only the emailing script. It's just at the point where combining validation chores that email fails. Maybe it's a mistake of timing?
  
  Thanks for any idea
  Robert
  
  

  On October 14, 2007 in macromedia.dreamweaver, robertlobsinger wrote:

  > My server relays mail out to my ISP SMTP that requires
  > authentication, but I have that works well when I use just the
  > emailing script. It's just at the time when combining the chores of posting which
  > email fails. Maybe it's a mistake of timing?

  Probably not.

  <>
  Code to send emails goes here
  Does change all the variables you get posted to the page
  ?>
  <>
  Insert here the code to post to the database
  Written by you or by DW
  ?>
  " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ".
  http://www.w3.org/1999/xhtml">
  
  
  ...

  --
  Joe Makowiec
  http://Makowiec.NET/
  E-mail: http://makowiec.net/contact.php