After downloading the updates, Windows XP asking to validate again.

Similar Questions

• After downloading the updates, I can't reboot my pc, so now I can't receive updates.

  After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

  Hi stevenstar,.

  a. you just download the updates of Windows or you have installed them as well?

  1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
  Once the computer restarts view the Windows update history and check if updates are installed.
  See the Windows updates are installed
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
   
   
  2 type eventvwr.msc/s in the address bar.

  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  After downloading the update for Yosemite 10.10.5, I got an annoying popup with a beep sound blaring that says that Safari crashed. I've forced to leave Safari, rebooted and popup returned once more. Restarted again and popup went. What was it?

  Open Safari while holding the SHIFT key

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Have to restore the ipod after downloading the update. Question, help please

  Hello!

  I have a large music library on my iTunes and so all my music does not fit on my iPod Classic 160 GB, which is fine.

  I have the latest version (last one that came out) the iPod Classic 160 gb.

  I have the latest version of iTunes.

  I use Windows 7.

  So basically I had no questions for recent years until last week.

  For a long time, I went through my collection of music [in view of SONGS] and placed check marks next to all the songs I want on my ipod.

  It's the way I like it. I have enough free space on my ipod for new music, I get every month so that it works.

  I connect the iPod to iTunes and SYNC my library, and it adds new songs I added to my iTunes library since I'm finally connected.

  Okay - here is the problem.

  Last week, when I connected my iPod Classic to iTunes, I got a saying there was an update to download.

  I am used to what is going on all the time with my iPhone, but I can't remember the last time there was an update for my iPod.

  Intrigued and not think what awkward or troublesome would come from him, I'm agree to download and install the new update.

  When he did download it says that it does not recognize the device (iPod). After searching for hours for help, I finally disconnected, stop, restart and rec-connected my iPod to iTunes.

  He says that he has no music on my iPod. I checked and it was not. He disappeared. ***!?!

  Fortunately, all my music was always in iTunes so I went with my library SYNC (again, I have the titles I want selected already). He said he could only and basically the only option was to reset my iPod to its factory settings. Because the way that my iPod is empty anyway, I thought, fine, so I did. I have restored its original settings.

  Later, I did the same thing after disconnecting. Shut down, restart, clean the cache and the registry, etc and then reconnected the iPod to iTunes. My first thought was maybe I should try to download the update again - since the ipod is empty at this time - what the *, why not - I would rather finish now than get my music on my iPod to be prompted to download new update, and start all over. So I clicked Check For Updates when my iPod was connected to iTunes and it said there is no new update. I don't remember the exact update, but I'm sure it was like 2.05 something, and what I have now (and had before all this happened) was 2.04 or something like that. So does well, no update? No matter what. At this point, I'm SO frustrated - I want just to SYNC my library via checked/selected songs and get back them on my iPod.

  When I went to SYNC, nothing happened.

  So I went to the tab that showed the music and it only gives me the option to SYNC my library of ENSEMBLE music (which is too large and does not fit on my iPod) - OR - I can go through this form on this page and browse and select the ARTISTS that I would like to add.

  It's so frustrating. First of all, I don't want to pass by and re - select all the songs I want to add - the main reason being - he did already - when you click on my library and select the songs view, you can see all the songs that I previously have selected/checked remains unchanged. Second, if I had to do it the way he wants me to all simply by selecting ARTISTS who will not work.

  Sorry for this long crazy question - but basically - how now factory - reset iPod Classic for SYNCING with my iTunes library with the songs of checked/selected, I already have checked - and not to go through and do it by limiting my will and have to select only the artist (not to mention that I did as I want).

  I appreciate any help or insight that someone could offer.

  Much appreciated!

  On the settings screen of the iPod summary (what you see in iTunes when you select iPod), there is a checkbox to Sync only checked songs and videos (wording may be different for your iPod).  Enable (check) this setting in combination with sync entire music library.

• A system totally crashed after downloading the update of windows 7 (from VHP) reloaded vista starting the Dell restore partition and reattach the requirements. Now, how can I restart upgrade

  OK, here's the deal... the Dell laptop had a recurring software validation fixed an error that I couldn't keep. I would fix it, Vista should go out and update itself and then I would reboot and bang, back right to the error again, I decided to scrap Vista and install W7. I corrected the error again once restarted in a stable Outlook, downloaded files of Windows 7 upgrade and then discovered that the netframework wasn't right, so I downloaded this solution, am to halfway through it and got a system error. HA! I'll just copy this download upgrade of the window on a USB key, hover over all my personal files on the usb drive, and reinstall Vista from the Dell partition, which I did. Then, I updated all the stuff with the Advisor to upgrade of windows, is gone in Windows 7 upgrade file I moved it to the USB and realized that this point in time, I was an asshole. What a breakthrough!  OK, now how to restart the upgrade process. I paid the money, done the downloads, message, so my hands, discussed and done all the other stuff I've done since the upgrade of Windows 3.1 (each time). Now what...

  First I would contact the people who sold you download and see if they will send again free of charge - explain the problem.  I guess you still have the product key, they have sent you that shouldn't be a problem (it will work with any download the same version of Windows7).

  Then run Windows7 Upgrade Advisor to see if your system can handle Windows7 or if she need for software or material removed or updgraded: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx.  Follow the instructions he gives as a result of the program (in fact, you should do this first - then you can deal with the download).

  After that, you need to further questions in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where people who specialize in the installation and upgrade to Windows7 will be more than happy to help you in the process.  This is a forum for Vista, and you need to talk to experts in Windows7.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Running Vista Edition Home Premium on Sony VGX-TP25E. After downloading the updates offered during installation, a new window opens indicating that the update works only on Vista. Computer has preinstalled Vista, but somehow it is not recognized.

  There is no error message number.

  Jim,
  It seems that if the this update does not work properly.  Where Sony allows you to download this update to live?  It is on the site of Sony or a Web to Realtek site?  You will need to contact the creator of this driver and know if there is a new one and/or give the problem you are having because they will have to fix this.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Automatic updates is stuck, includes most of it resources, is not download the updates (windows xp) & how to use FixIt

  Automatic updates is stuck and includes most of the computing resources, does not download updates (windows xp).

  After restarting a couple of times and the computer almost melt it finally resolved itself but would like to know how to solve/speed "constipation" where it would happen again.

  Have automatic updates set in place to be notified, but not to download or install before you have manually committed.  Launched the download but then icon taskbar disappeared and cannot cancel downloads when the computer started to overheat.  Restarted.

  East went to the Microsoft Update Web site, but got stock without ever generating the list of updates.  Restarted.

  Went to link to FixIt for this type of problem and it just downloaded WindowsUpdateDiagnostic.diagcab and indicated that nothing was available to open this type of file.  Should a FixIt application be installed first?  He is yet to provide suggestions on how to proceed.

  Aversion to disable the automatic updates if would like more information on how to have a greater mastery of the process that it hogs computer and interfere with the realization of planned work.

  Kind regards.

  Thanks for the reply.

  I agree that it is not dust on the fan - read my response above.

  As I said above, I have concluded that the solution to the problem of automatic updates are unruly must all just use to be notified when updates are available, but then go on the site of Microsoft Updates and make the download / installation of the updates from there.  Doing it this way is much less likely to cause problems and offer better control of the user.  Once Microsoft Updates ends the taskbar icon disappears until the next time updates are available.

• After downloading the updates, pc keeps trying to re-boot

  Cannot restart after downloading updates of security. Bed: "Configuring updates: stage 3 of 3-0% complete."  Do not turn off your computer '. The '% 0' does not; He's trying to restart after 3 to 4 minutes, then the same screen.  I tried Ctrl/Alt/Del for attemtempted re-start, tried last good Config known but not good; Get RSTRUI.exe message "the instruction at OX75143211 referenced memory at OX00000004.  The memory could not be read '. Any suggestions please?  Not much of the experet these things...

  Hi Gina,

  1 have you tried safe mode?

  Method 1:

  If this isn't the case, then I suggest you check this below article provided in Windows Help.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  You can perform a system restore using the Windows recovery environment (WinRE) to run the system restore (if system restore is enabled on your computer)

  a. Insert the Windows vista installation disc in the disc drive, and then start the computer.
  b. press a key when the message "press any key to boot from CD or DVD".
  c. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  d. click on repair your computer.
  e. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next.
  f. in the System Recovery Options dialog box, click System Restore.
  g. follow the instructions in the System Restore Wizard and choose the appropriate restore point.
  h. click Finish to restore the system.

  Method 3:

  Once you are finished with the system restore, I suggest you follow these below provided as follows.

  Try to reset the Windows update components and check if this solves the problem.
   
  Step 1:
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058
   
  Step 2:                      
   
  If the problem persists then I suggest you perform the steps mentioned in the link provided below.
   
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358 
   
  Note: Ignore the title of the article as it is applicable to the issue you are facing.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• PSE 13 crashes after downloading an update

  Hello

  Have a problem with Photoshop elements 13.0 crashing after update.

  The program runs for a few minutes after downloading the updates, and then Windows indicates that the program has stopped working, and the program stops.

  The problem can be solved only by the loading of the purchased program from the Adobe website, but without the support of new files camera RAW etc.

  The computer is new, no limit material, the version is Windows 7 pro (SP1), 64-bit.

  Enabled Adobe Download Centre (from whatever reason not enrolled in 'my account').

  Please notify.

  Thank you

  A.D.

  reset your preferences -: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• Computer screen problem after you download the update from Microsoft Windows

  My computer screen appear stained in colors like "shattered windshield appearance" after download Microsoft window update for the hardware called, ATI Technologies, Inc. - Video - ATI MOBILITY RADEON 7000 IGP. I downloaded this after my computer recovered from a serious error (according to the message) that push me to send an error report. He advised me to download the update custom as indicated above.

  Later, I noticed the screen problem. Can someone help me please on this issue?

  Can you please reduce the OS to an earlier time using System Restore tool and check if this problem has disappeared?

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Cannot download the update from microsoft > update security for windows media encoding for windows xp and windows server 2003 kb2447961

  I am running HP pavillion A1130n desktop computer > problem > I can not IN stall Microsoft Update > update security for windows media 9 for windows xp and windows server 2003 kb2447961 of coding... .e send me a response message. > * E-mail address is removed from the privacy *.

  Hello
  
  1. don't you encounter any error message during the installation of this update?
  2 is this problem limited to this particular update?
   
  I ask to download the update manually and then install it.
  Here is the download link:
  A security update for Windows Media Encoder 9 Series for Windows XP and Windows Server 2003 (KB2447961)
  http://www.microsoft.com/downloads/en/details.aspx?familyid=EF0ADA2C-965F-438F-A1D3-BD45DB8460C1&displaylang=en.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify

  Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify

  Yes I have FIOS Media Manager installed, but I've done since the start of Windows 7.  For the first week or so it does not start on my download restarts.  It started with this Nov 3 update from Microsoft.  I went to downloads and there were two of them; Update for Internet Explorer 8 for x 64 based and updated Windows Defender definition.

  After you install these two updates on restart FIOS M.M. was live at startup and my favorite MSN have disappeared.  I disabled FIOS M.M., but somehow, he has been activated with this download.  I went on my drive external backup and recovered the Favorites but am always intrigued by this phenomenon and how it changed my registry.

• failures after you download the update of the EOS 5 computers xp...

  pretty much says it sll.

  I have 2 desktop computer and top of map 2 and 4 neighbors 4, that after loading the UPDATE of EOS seems to hang in very slow motion
  and no longe do work at an acceptable level on the step 2 days that I tried to help everyone, nothing is done as if I get the Task Manager started immediately I can see process shows 99% idle, yet seems to be suspended.  I discovered this by starting a laptop, I have not used for some time, he started very well and lasted a few hours ok, until I have ok download and installation of the upgrade of the EOS.  It is now in the same compartment as the others...

  I don't appreciate a poison pill and wonder how legal this is...
  I have a 95 computer running well... no support, but it seems is to not care not and keeps on ticking.
  (it follows a door access log)

  Thank you Microsoft... 8 -)
  Needless to say that I am very unhappy...

  pretty much says it sll.

  I have 2 desktop computer and top of map 2 and 4 neighbors 4, that after loading the UPDATE of EOS seems to hang in very slow motion
  and no longe do work at an acceptable level on the step 2 days that I tried to help everyone, nothing is done as if I get the Task Manager started immediately I can see process shows 99% idle, yet seems to be suspended.  I discovered this by starting a laptop, I have not used for some time, he started very well and lasted a few hours ok, until I have ok download and installation of the upgrade of the EOS.  It is now in the same compartment as the others...

  I don't appreciate a poison pill and wonder how legal this is...
  I have a 95 computer running well... no support, but it seems is to not care not and keeps on ticking.
  (it follows a door access log)

  Thank you Microsoft... 8 -)
  Needless to say that I am very unhappy...

  You update Microsoft Security Essentials. If you have done it is probably where the problem is. Click on the link and read the article.

  http://News.Softpedia.com/news/Microsoft-Security-Essentials-update-makes-Windows-XP-unusable-438170.shtml

• Update Windows repeatedly asks me to download updates

  Update Windows repeatedly asks me to download the updates on Office 2007 2 and 1 Excel 2003 update, although the update history shows these updates succeeded (properly installed).

  KB2760588, KB2810048, KB2760411

  I've finally just marked them as hidden so updates it wouldn't keep bugging me, until I can find an answer or a revised update is published (already happened).

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/on-xp-pro-kb2760411-kb2760588-and-kb2810048-will/354cf9ff-dd70-4cd6-875d-734f816ee577

  It has the most members complain.

  Joe