After replacing my HARD drive with a 1 software to, serverals collapsed at work, such as messenger, Windows Update, network (printers and computers cannot be seen).

Similar Questions

• Can not recover the Windows 7 desktop after replacing the hard drive

  I bought a new HP Pavillion Elite (HPE-240f) in August 2010. A week ago my hard drive has no SMART short self-test during systematic hardware diagnostics. I installed a new hard drive of the same size - 1 TB and could never make it work properly. I tried the following (in that order).

  1. using a system repair disc, I got the system from a previous image (which I did shortly after the purchase, install my own software and configuration of all). It worked, but then I noticed that Windows Update was not working. I ran various Microsoft diagnostic tools and discovered that some (unspecified) system files have been damaged or missing. All the fixes I tried didn't work. I ran hardware diagnostics extended, but no problem not found.

  2. I tried to restore the system to the default settings by using the original image on the D partition. At first it seemed to work, but at the last moment when the system started, I saw a message on the screen that Setup is starting services and then got a warning saying that services failed because of (unspecified) problems with hardware.

  3. I tried to restore the system from the system recovery discs and a message "system recovery disks do not support this computer."

  4. I found this Cyberlink utility on the HP website, dealing with precisely this issue. I created a CD tried and it didn't work.

  5. I found this document on the HP Web site, saying that if you are replacing a hard drive with sectors of 512 bytes with a new advanced Format (AF) drive (with areas of 4 096 bytes) and your system was manufactured before October 2010 (as mine was), you must get the new HP recovery disks. I thought I finally found the root of my problems (since the new drive is indeed AF and the old man is not) and ordered HP recovery discs.

  6. the disks arrived today, and I noticed that the version number of the software (for Windows 7 version) is almost the same as on the computer, except that the last digit is 9 on disks and 6 on the computer - I guess it's an update to deal with the problem hard drive AF. However, I get 'system recovery disks do not support this computer' error, if I use the utility from CyberLink recovery disks or not. To be on the safe side, I even used a new hard disc (new 1 TB) right out of the box (never partioned and installed previously) and connected the original keyboard supplied with the computer (I also unplugged everything except the monitor, keyboard and mouse). However, I get the same message. Just out of curiosity I tried to put back the original hard drive (certainly not in best shape, even if the system always starts with him) and still could not recover the system.

  What else can I try?

  Any help will be greatly appreciated.

  An alternative to try. > If you can read the Microsoft Windows 7 of 25-character license key attached to the Tower, you can download a Windows 7 ISO file to burn to a DVD. The version must match that on the sticker COST Microsoft. for example Home Premium

   

• Replace a HARD drive with a SDD for HP Pavilion dv6183ea

  Hello

  I have a HP Pavilion dv6183ea laptop and I was wondering if I can replace the hard drive with a new one SSD?

  Thank you

  Hello

  Of after crucial, you can not put your disk for one SSD.

  Kind regards

• System Restore to factory settings after replacing the hard drive?

  I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

  Thank you

  After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

  You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

  Lenovo - call to order recovery disks:
  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

• Is it possible to replace the hard drive with an SSD? or would it be too expensive?

  Is it possible to replace the hard drive with an SSD?

  or would it be too expensive?

  Yes.  There are several alternatives.  I found a way relatively inexpensive, using a map of mSATA (very small SSD) and an adapter to connect it to the connector IDE 44 pin internal of my PowerBook.  It works very well.  Rather than repeat what I posted previously, you can watch these two topics (which also has good info, other users)

  Re: This win to install a SSD drive in a PowerBook G4?

  Re: SSDS  (my post is halfway - "this is how I did with my trusty Pismo...) »)

  FYI - I have used the adapter is even cheaper now

  https://www.Amazon.com/GP/product/B009BA8V4M

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Qosmio X 500 - 10W - can I replace the HARD drive with another?

  Hello

  I have a Qosmio X 500 - 10W with two drive HARD Toshiba MK5055GSX 500 GB 5400 RPM 8 MB? SATA II but is one of the hs so I'm wondering if I can be replaced by a more powerful style, drive HARD 750 GB 7200 RPM / min 16 MB Toshiba courses?

  Thank you

  Hey,.

  Your question is a bit hard to understand, but I think you want to replace the HARD drive with another (faster) model, right?

  Well, that s no problem. 7200 RPM hard drives works, they are a little stronger, but they're faster so if you need more performance without problem.
  750 GB or more are also no problem because the SATA interface is not the limited capacity. Theoretically 1 TB or more should also work.

  Anyway, you can buy the 750Go you mentioned that it will work. :)
  ?

• ThinkPad Edge S430 - is possible to replace the hard drive with an ssd?

  Hey, Lenovo,.

  I bought a Thinkpad Edge S430 and wonder if it is possible to replace the hard drive with an ssd?

  Kind regards

  Mikael

  
  

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Cannot access through desktop remote after replacing the hard drive

  After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

  Hello

  I appreciate the efforts that you put to publish the query on this forum.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• Error: 150:30 after replacing the hard drive

  After replacing my hard drive of Apple iMac (Apple remember), I get an error code 150:30 when trying to open Photoshop CSCS4. Spin OSX 10.11.1

  All solutions?

  John

  150:30 errors mean that the licensing mechanism is broken, usually because the software moved instead of being re-installed.

  Uninstall, reinstall from the disc or download then enter your serial number.

  Download the CS4 products

• How can I reinstall windows after replacing the hard drive? Laptop did not come with a disc.

  My internal hard drive went bad in my laptop, easy to replace and relatively inexpensive. However, the laptop came not with the windows disk. So, how can I reinstall windows once I replaced the hard drive?

  Basically, you have two choices. You can communicate with the person who made the computer and see if they can provide either a set of Windows Vista restore disks (I would assume) or an installation for Windows Vista (probably OEM) DVD. If the second choice, determine if you will need to download device drivers or software packages from their web site. OR, you can purchase the operating system of your choice, retail. The wisdom is that, if this is your choice, you see if you will need the device drivers and get those of the web site of the manufacturer.

  Once you have the disks, install in the usual way.

  Tom Ferguson

• Problems with folder permissions after replacing the hard drive

  Hello

  Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

  drwxr-x - 13 501 501 442 5 July 2013 MG

  Any help would be greatly appreciated!

  Running OS X El Capitan

  10.11.4 version

  Try this first:

  Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

  When this does not help:

  Reset password utility in the recovery Partition:

  1. Restart your computer from the recovery partition.
  2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
  3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
  4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
  5. Exit the utility password and return to the main recovery menu.
  6. On your keyboard, press ⌘ + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.