After scoring in XP, get message "re - install the suite module in your system 32 directory: Comm. DRV.

Similar Questions

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  Hello

  I understand that you are warned to install the update even repeatedly. I'll be happy to help you with this problem.

  (1) did you do changes on the computer before this problem?

  (2) you have Service Pack 1 installed on your computer successfully?

  (3) are you advised to re - install the Service Pack 1 update again?

  (4) you receive an error message when you try to install Service Pack 1?

  Method 1: I suggest you run Microsoft FIXIT from the link and if the problem persists.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: I also suggest you to follow the steps from the link and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• I want to download Adobe after effects CC, however, a message appears on the screen: at the moment, he had problems. Please try again later. If the problem persists, contact customer support. What should I do?

  I want to download Adobe after effects CC, however, a message appears on the screen: at the moment, he had problems. Please try again later. If the problem persists, contact customer support. What should I do?

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• When I defragment I get message "suspended for the shadow copy of volume.

  Original title: Defrag problem

  When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?

  The VSS Service should not be run unless you do some kind of a backup that uses it.

  Are you using any kind of third-party backup software that would force the VSS Service to run all the time?

  If defrag used to work, what do you think might have changed since the last time it worked correctly?

  I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).

  You check the VSS Service, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet and find the Volume Shadow Copy Service.

  Select the status and Startup Type columns.

  If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.

  If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself).  If it starts up again without a valid reason, you need to understand why and fix it.  Restart to make sure the changes 'stick '.

  See if your defragmentation works when the VSS Service does not work...

• Whenever I open Word 2007 I get the message 'Compileerror in the hidden module AZWizardModule.

  Original title: Microsoft Visual Basic

  Whenever I open Word 2007 I get the message 'Compileerror in the hidden module AZWizardModule.

  Can someone explain what this means please

  Hello rt00,.

  The reference to azwizardmodule season you have the Label Wizard Avery Dennison add-in for Word. Try to uninstall the add-in. If this
  solves the problem, you can try to reinstall, but if this then causes the error to return, you will need to uninstall again and get a
  update before you use it.

  Here are the the Microsoft KB articles that could help.

  KB Article ID: 328239 -' compilation in the hidden module error: hand "error message when you try to save a document in Word

  KB Article ID: 314127 -you receive an error message "Error in the module hidden compilation" in Word 2002 and Word 2000

  KB Article ID: 272066 -compile error in hidden module Tbrun97.xls in Excel

  KB Article ID: 307410 -you receive an error message "Error in the module hidden compilation" when you start Word or Excel

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. "__What I can do to fix this? __Thanks

  When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. »
  What can I do to fix this?
  Thank you

  Hi Palaimo,

  See if one of the patches in the following link works for you.

  Snipping Tool fails

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Impossible to download avast antivirus get message... the connection with the server has been reset

  I have a laptop Samsung RV510 with windows 7, need a free antivirus software

  try to download avvas as wel as AVG

  Get message afte a vew of download twinks... Impossible to download avast antivirus get message... the connection with the server has been reset

  Help, please

  Other downloads, for example widows day running ok?

  You download from the site of decision makers or one of the other indirect sites?

  MSE of MS is free

  http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-download

• I tried to install the suite 5.5, but get an error of activation to come?

  I tried to install the suite 5.5, but get an error of activation to come?

  I don't know no creative licenses that cloud never expire.

  first of all, check once you have entiring your serial number correctly.  If you are sure you are, contact adobe support: http://www.adobe.com/support/chat/ivrchat.html

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Error message "unable to make changes to parental controls settings. If the problem persists, see your system administrator"when you set parental controls for a user account

  Original title: user account with an effort of parental control

  After logging in to my admin account, I created two user accounts for my children, set up parental controls for both that I created, when I tried to set up the third account that he would allow me to activate parental control. It seems that he is trying to load the screen to give me the parental control options then the window disappers and another small window appears saying "cannot make changes to parental controls settings. If the problem persists, see your system administrator. I close the window, and then open the parental controls for other accounts, and they work very well, allows me the chance to change. I deleted the third account several times, making sure to create on behalf of others, just like I did the first two. Still no luck. Can I have only 3 total accounts? My administrator account and standard users 2.

  How can I get a standard user account third with parental controls?

  Hello

  Create a new user account and check if the problem persists, the problem does not persist in the new user account, then fix the damaged user account.

  Create a user account (Windows Vista)

  Screw a damaged profile (Windows Vista)

  Check out the link below to check if the parental control is correctly defined

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls-activity-reports

  Hope this information helps.

• Installed the updates recommended by security system.chgd desktop.removed all but microsoft 2. How can I do when it won't let me?

  When I rebooted my laptop after installing the updates recommended by my system j.4 (all updates have been microsoft), I restarted my computer and changed the entire look of my office.  There was a quick pop upward to the right screen below who said that I had to do something or when I turned off my computer I loose something.  Help, please.

  What security system are your help?

  (1) uninstall your security and reboot system. The Office made it back to its original state?

  (2) reinstall the security system - Exchange Office?

  (3) start > all programs > Accessories > system tools > system restore

  (4) select a date before the updates, that you are referring

  (Popup you mentioned may have had the warning on save changes or you may lose your work...)

  (5) do a full scan of your system, here, to rule out the possibility of a virus.

  http://housecall.trendmicro.com/

• Bridge cc 64-bit, cannot install the output Module, help

  Hello

  Why is so hard to install the output module

  I've done all Install Adobe Output Module

  and when I close the bridge and restart it asked me if I want to add the output module, I asnwer Yes

  I have the outpot workspace, but when I click on it, nothing,

  I tried to delete the files in the output module, load brige cc, close-> re - install the output module

  nothing that I can not have the module output

  Why is so hard to leave work?

  can I ask?

  do you not reset preferences could help?

  in this case, how can I save them?

  I have run the last version of bridge cc, cc of photoshop 64-bit w8, 1 pro 64-bit

  Thank you

  Hello

  After reading the Forum without luck

  I found the solution at least for windows

  inside the AOM_Package_Win64 in my case because I installed only fill 64 bit

  There are

  Adobe output module

  AdobeOutputModule.workspace

  copy/extract the folder Adobe Output Module-> Extensions from C:\Program Files\Common Files\Adobe\Bridge CC

  copy/extract the AdobeOutputModule.workspace file-> in C:\Program Files\Fichiers Files\Adobe\Bridge CC Extensions\Workspaces

  
  

  launch bridge

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  uninstall all cc (if nothing is installed) by using the adobe uninstaller programs.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer, and then install, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.